[WTS/WTT] BlackArrow Breakout Board Cases/Mounts

[mstrongbow]

Fresh off the printer!

3D Printed BlackArrow Breakout Board Cases/Mounts for the BlackArrow Software ATX to DC Breakout boards
Found here http://www.blackarrowsoftware.com/store/atx-to-dc-power-adapter.html
and here http://minersource.net/collections/frontpage/products/atx-to-dc-power-adapter
also offered in a deal with 6+ R-Box orders here https://bitcointalk.org/index.php?topic=612390.0
These breakout boards are great for powering the latest Rockminer R-Box units as other mining hardware as well.

Feaures:
Protection from shorts/grounding
Multiple mounting positions
Many Colors available
No hardware required for installing your BlackArrow Software breakout board, it snaps securely in place.


$9 each plus shipping
or 2 for $16 plus shipping
or 3 for $23 plus shipping

BTC, LTC, DRK, Dogecoin, PayPal, MoneyPak payments accepted.
ALL trades considered.

BTC Payment Address
1NcoVoBrtnQTdyZvxYKXbCrL6MkKtgk842

LTC Payment Address
LQo9Ue64uDPUA7X8Hf47Lcxv6uuMy3hjqz

DRK Payment Address
Xan1hYGmXt93fX3VqrhE981mzEs5Wm2xQD

Dogecoin Payment Address
DCEnZBdDY21b7Cn45rEuxKGEi1Sw1gNspy

Please PM me for custom orders and when sending payment etc.

These should fit in a small padded envelope, more on that soon.


***NOTE***DO NOT PLUG MORE THAN ONE (1) PSU INTO THESE BREAKOUT BOARDS.
                    Bad things happen! (to the secondary psu)

EDIT--NOW READY FOR PRODUCTION!

[mstrongbow]

Preview of the cover (just finished modeling)



I have yet to clean up my cables but here are the first pics.

[jjj0923]

very nice work - could we see a picture of the entire rig?

[mstrongbow]

very nice work - could we see a picture of the entire rig?

Sure thing mate...

[chanberg]

Looks good! I was gonna make something similar using quarter inch acrylic. But this is way nicer! Nice job
Danny

[CrazyGuy]

Very nice, what model 3d printer do you own?

[mstrongbow]

Looks good! I was gonna make something similar using quarter inch acrylic. But this is way nicer! Nice job
Danny

Thanks bro! I should have that trust feedback posted for ya later today...just now catching up!

Very nice, what model 3d printer do you own?

I operate a Wanhoa Duplicator 4 printer and I am building a secondary (production) printer of the Hadron Ord Bot style and it will also have dual print heads. With profits from my mining operation, I am saving up for a powder-fed SLS (selective laser sintering) style printer but those run in the $10k range for a used model.

[ManeBjorn]

That is a kick ass setup of 3D printers.  So cool.

So what colors do you print in?

Looks good! I was gonna make something similar using quarter inch acrylic. But this is way nicer! Nice job
Danny

Thanks bro! I should have that trust feedback posted for ya later today...just now catching up!

Very nice, what model 3d printer do you own?

I operate a Wanhoa Duplicator 4 printer and I am building a secondary (production) printer of the Hadron Ord Bot style and it will also have dual print heads. With profits from my mining operation, I am saving up for a powder-fed SLS (selective laser sintering) style printer but those run in the $10k range for a used model.

[mstrongbow]

That is a kick ass setup of 3D printers.  So cool.

So what colors do you print in?

JUst got home from my appt. at the VA. I started the lid print just now and should have install pics soon.

Currently I have White, Blue, Yellow, Silver and Orange ABS filament and am placing an order for more Black and either Green or Red.
I also have some Glow in Dark Blue on back-order plus I carry a few other material types (nylon, ceramic, PVA etc) for testing and odd jobs.

[ManeBjorn]

Are the prices for the units including the lid?
I am going to get one when you are ready.

That is a kick ass setup of 3D printers.  So cool.

So what colors do you print in?

JUst got home from my appt. at the VA. I started the lid print just now and should have install pics soon.

Currently I have White, Blue, Yellow, Silver and Orange ABS filament and am placing an order for more Black and either Green or Red.
I also have some Glow in Dark Blue on back-order plus I carry a few other material types (nylon, ceramic, PVA etc) for testing and odd jobs.

[mstrongbow]

Are the prices for the units including the lid?
I am going to get one when you are ready.

Yes, both lid and base/mount included in the above listed prices.

[bobsag3]

Very nice!

[mstrongbow]

Fresh pics of the cover/lid installed! A couple minor changes to the lid and it will be ready.

Also, I am updating the mount/base for faster printing, more versatile mounting options and a more compact unit. Stay tuned for a sneak peak of the new model

More pics soon!










*EDIT---REVISED POST WITH NEW PICS

[mstrongbow]

Are the prices for the units including the lid?
I am going to get one when you are ready.

That is a kick ass setup of 3D printers.  So cool.

So what colors do you print in?

JUst got home from my appt. at the VA. I started the lid print just now and should have install pics soon.

Currently I have White, Blue, Yellow, Silver and Orange ABS filament and am placing an order for more Black and either Green or Red.
I also have some Glow in Dark Blue on back-order plus I carry a few other material types (nylon, ceramic, PVA etc) for testing and odd jobs.

Here are pics of the colors I have currently. Black is on order and should be here within a couple days.
I normally stock red filament but just ran out last week.

[mstrongbow]

Now taking orders...

Customizable lids at little to NO extra charge!

[mstrongbow]

Now taking orders...

Customizable lids at little to NO extra charge!

Custom lid for MinerSource.net order!
(first print before changes-enlarged logo and modified the lid dimensions a tad after this print)



More pics soon! (unmounted/unpopulated cases)

[helipotte]

Could you make them for the Black arrow control boards? These:

http://www.blackarrowsoftware.com/store/bitfury-controller-version-2.html

[mstrongbow]

Could you make them for the Black arrow control boards? These:

http://www.blackarrowsoftware.com/store/bitfury-controller-version-2.html

Yes. I do not own one of those so I would need dimensions (L x W x H) in Millimeters preferably. Although it would be much faster with a unit in hand, I do not require nor need a unit on hand to design and produce a case.

I have also been working on a case for the DualPSU adapters...
http://www.poweredrisers.com/dual-power-supply-adapter-similar-to-add2psu/

and eventually for this one...
http://www.amazon.com/Add2PSU-Multiple-Power-Supply-Adapter/dp/B009P98Q8U

[samsonn25]

Nice work.

[mstrongbow]

Nice work.

Thanks very much. I enjoy making stuff.

2 orders have been placed and are being worked on and/or printed now. Thanks all!

More pics soon!