|
Title: 2 capacitors came off one of my Antminer S1's Post by: redeyez21 on June 10, 2014, 08:01:23 PM Hi guys,
I accidentally clipped two capacitors from one of my S1's, it looks like a clean break and both capacitors look fine to re-use Would I simply be able to buy a soldering iron and re attach these? thanks Title: Re: 2 capacitors came off one of my Antminer S1's Post by: byt411 on June 10, 2014, 09:01:16 PM As far as I know, there wouldn't be a problem soldering it again. Just solder it properly. If it doesn't work, see if you can get the same capacitors to replace them.
Title: Re: 2 capacitors came off one of my Antminer S1's Post by: redeyez21 on June 10, 2014, 09:17:47 PM thanks buddy, I'll get on that tomorrow. The problem is on the master blade side, would it be ok to power up and hash with?
I think I'd need to unscrew it and get mobo to connect to the working blade otherwise thanks for that red Title: Re: 2 capacitors came off one of my Antminer S1's Post by: byt411 on June 10, 2014, 09:27:26 PM thanks buddy, I'll get on that tomorrow. The problem is on the master blade side, would it be ok to power up and hash with? I think I'd need to unscrew it and get mobo to connect to the working blade otherwise thanks for that red I think it's OK if the normal blade can hash, but don't let the broken blade hash until you have repaired it. I suggest you just leave it be for now, and fix it, then start hashing. |