2 capacitors came off one of my Antminer S1's

[redeyez21]

Hi guys,

I accidentally clipped two capacitors from one of my S1's, it looks like a clean break and both capacitors look fine to re-use


Would I simply be able to buy a soldering iron and re attach these?

thanks

[byt411]

As far as I know, there wouldn't be a problem soldering it again. Just solder it properly. If it doesn't work, see if you can get the same capacitors to replace them.

[redeyez21]

thanks buddy, I'll get on that tomorrow. The problem is on the master blade side, would it be ok to power up and hash with?

I think I'd need to unscrew it and get mobo to connect to the working blade otherwise

thanks for that

red

[byt411]

thanks buddy, I'll get on that tomorrow. The problem is on the master blade side, would it be ok to power up and hash with?

I think I'd need to unscrew it and get mobo to connect to the working blade otherwise

thanks for that

red

I think it's OK if the normal blade can hash, but don't let the broken blade hash until you have repaired it. I suggest you just leave it be for now, and fix it, then start hashing.