Title: Antminer S1 configuration HELP!!!! Post by: kevin1234a on July 19, 2014, 03:47:20 AM Need help in configuring Antminer S1 to achieve its normal hash rate
http://s15.postimg.org/tmsvafnvv/Untitled.png i couldn't figure out what difficulty level i have to set for each worker especially Antminer (worker1)? below is the pic for antminer status page as well. Do i have to change any setting for Antminer so at least it reach to 150 Ghs. http://s18.postimg.org/r9ea9dybd/Untitled1.png thanks Title: Re: Antminer S1 configuration HELP!!!! Post by: Hektur on July 19, 2014, 05:39:55 AM it looks like you only have 1 blade mining. Check the cable running from the controller board to blade 2 to make sure they are plugged in all the way and check your power cable to also make sure it's seated right. Lower on the Miner Status page, what is it showing for Chain #2? Does it show any ASIC number or any x's?
Title: Re: Antminer S1 configuration HELP!!!! Post by: kevin1234a on July 19, 2014, 07:05:22 AM it looks like you only have 1 blade mining. Check the cable running from the controller board to blade 2 to make sure they are plugged in all the way and check your power cable to also make sure it's seated right. Lower on the Miner Status page, what is it showing for Chain #2? Does it show any ASIC number or any x's? Asic status for chain 1 and 2 is xoxoxoxo xoxoxoxo xoxoxoxo Title: Re: Antminer S1 configuration HELP!!!! Post by: jonnybravo0311 on July 20, 2014, 03:41:15 PM it looks like you only have 1 blade mining. Check the cable running from the controller board to blade 2 to make sure they are plugged in all the way and check your power cable to also make sure it's seated right. Lower on the Miner Status page, what is it showing for Chain #2? Does it show any ASIC number or any x's? Asic status for chain 1 and 2 is xoxoxoxo xoxoxoxo xoxoxoxo Title: Re: Antminer S1 configuration HELP!!!! Post by: kevin1234a on July 20, 2014, 04:12:52 PM Sine you had mention this thing i wonder may be im not using right cables can you have a look to this post and advise may i need different cables to connect with psu thanks
https://bitcointalk.org/index.php?topic=344970.msg7903797#msg7903797 |