|
Title: [ANN] Technobit full minig solution 4HEX16e - 600 GHS Post by: marto74 on July 24, 2014, 03:41:32 PM Hi,
WE are ready with the first prototype of our AM BE 200 chips based miner The miner is fully enclosed with 4 Hex16E boards, TP-link control unit, usb hub, power distribution board, fans. It works stable with 600 GHS , and power consumption in this mode is about 750 Watts http://s27.postimg.org/hoft9xj73/4_HEX16e.png (http://postimg.org/image/hoft9xj73/) http://s27.postimg.org/ign2mvcrz/20140724_182749.jpg (http://postimg.org/image/ign2mvcrz/) http://s27.postimg.org/kwkamz5gv/20140724_182802.jpg (http://postimg.org/image/kwkamz5gv/) http://s27.postimg.org/jk76ytxf3/20140724_182809.jpg (http://postimg.org/image/jk76ytxf3/) Title: Re: [ANN] Technobit full minig solution 4HEX16e - 600 GHS Post by: zulover on July 24, 2014, 03:50:52 PM power usage a bit high isnt it?
Title: Re: [ANN] Technobit full minig solution 4HEX16e - 600 GHS Post by: marto74 on July 24, 2014, 03:52:21 PM power usage a bit high isnt it? This is real world @ the wallif you remove the PSU loses 10-12% it is about 680 W that is about 1.1 W/GHs Title: Re: [ANN] Technobit full minig solution 4HEX16e - 600 GHS Post by: loshia on July 25, 2014, 05:56:24 AM This baby is looking good ;)
Title: Re: [ANN] Technobit full minig solution 4HEX16e - 600 GHS Post by: nightyj on July 25, 2014, 09:16:58 AM Nice product again ;)
Title: Re: [ANN] Technobit full minig solution 4HEX16e - 600 GHS Post by: zulover on July 25, 2014, 11:28:32 AM power usage a bit high isnt it? This is real world @ the wallif you remove the PSU loses 10-12% it is about 680 W that is about 1.1 W/GHs i see ok. 680 is liveable for 600ghs. Title: Re: [ANN] Technobit full minig solution 4HEX16e - 600 GHS Post by: marto74 on July 25, 2014, 06:35:49 PM Title: Re: [ANN] Technobit full minig solution 4HEX16e - 600 GHS Post by: nightyj on July 26, 2014, 12:32:35 AM Error and reject rates are really low, great job ;)
Title: Re: [ANN] Technobit full minig solution 4HEX16e - 600 GHS Post by: marto74 on July 26, 2014, 04:30:48 PM pre-production batch for sale now
http://technobit.eu/index.php?id_product=84&controller=product&id_lang=1 (http://technobit.eu/index.php?id_product=84&controller=product&id_lang=1) Title: Re: [ANN] Technobit full minig solution 4HEX16e - 600 GHS Post by: ZBC3 on August 04, 2014, 03:20:44 PM What's the min amps required for each rail on the psu to power the unit?
Title: Re: [ANN] Technobit full minig solution 4HEX16e - 600 GHS Post by: marto74 on August 04, 2014, 10:33:50 PM you need about 800 W with small reserve so in case multy rails just even split
Title: Re: [ANN] Technobit full minig solution 4HEX16e - 600 GHS Post by: ZBC3 on August 21, 2014, 04:27:10 AM Martin,
You must up to your eyes with the minion chip assembly, ha. Have you got an update on when the Aug 10th hex16e's will ship? I accidentally used DPD instead of the UPS option and I'm not sure how long it will take to ship with DPD. Title: Re: [ANN] Technobit full minig solution 4HEX16e - 600 GHS Post by: ZBC3 on September 25, 2014, 01:45:23 PM How's the production of these coming along? Hopefully they'll be rolling out the door soon.
Title: Re: [ANN] Technobit full minig solution 4HEX16e - 600 GHS Post by: marto74 on September 25, 2014, 01:46:30 PM How's the production of these coming along? Hopefully they'll be rolling out the door soon. Actually they are today and tomorrowTitle: Re: [ANN] Technobit full minig solution 4HEX16e - 600 GHS Post by: Bicknellski on September 27, 2014, 03:02:10 PM https://bitcointalk.org/Themes/custom1/images/post/thumbdown.gif Technobit Up to 10 week delays in shipment of some customers Minion Group Buy Units.
The hurt / delays continue for some customers of Technobit who have paid substantial amounts for miners over 10 weeks ago. I agree with scrappy here, Batch 1 should of been sent out by now. reading the thread its totally unprofessional sending out small orders first. i see some people waiting 10 weeks now for there order to be shipped out and nothing. Seems people with large orders are getting shafted. I think compensation is due MARTO!!!! People have been patient with you since you had a problem with the boards, but this now seems to be resolved. So what exactly is going on?? i do not what to take legal action as BFL are facing and now KNC miner, marto. You really havent provided any updates to people with large orders on the forum at all. Please provide a clear update on what is going on and when everyone's orders are going to be fulfilled and compensation package. with have been patient, but you have taken are patience for granted now. There is seriously something wrong with this thread. Folks Martin has yet to deliver batch one yet we have 3 confirmed cases of him shipping batch 2. He says "small orders" Fuck that shit. Mine may have been large and paid in fiat. I have as of to date received 6 of 50, and Marto has promised 6 shipping dates and only sent once! Guys, enough of the bullshit. I paid in fiat for a flat conversion, have been lied to about shipping, and seen batch 2 orders go out before mine. Check the thread, I was in page 2 and traded in 2 x3's and paid in fiat. I know I am not alone here as I have spoke to many of you in pm's. Enough with the BS, bring it. scrappy do, dam so shipments are just trickling out. i would of thought at least batch 1 would of been completed by now I haven't received a single one of my 88 boards. My chips have been at technobit since July 17th. Marto any news when batch 2 will be shipped, its been over a month now since you received my chips. ive emailed you on your site, 2 weeks ago and no reply. would like to know whats happening with those. you going to be offering any compensation for late deliveries now. awaiting 25 boards >:( and counting No offense Guyver, but he hasn't even shipped batch one out. Hopefully he will not ship out anymore batch 2 like the mistake made last week. I just got my first partial shipment today 6 of 50. I know its been over a month for you and I hate it, but it has been over 10 weeks for some of us. Title: Re: [ANN] Technobit full minig solution 4HEX16e - 600 GHS Post by: ZBC3 on October 02, 2014, 11:02:02 PM I need some help with my set up. I flashed my own tplink with 4.0, but am not hashing. All of the defaults were used.
My settings are: HEX16E Chip Count (Default: 16) HEX16E Chip Frequency (Default: 300) HEX16E Chip Core Voltage mV (Default: 860) HEX16E pic work roll (Default: 90) HEX16E Enable or Disable Chips Hex (Default: ffff) HEX16E ASIC difficulty HEX16E Enable or disable HEXMinerBE200 automatic reset HEX16E reset chip due to N consecutive HW errors (Default: 5) HEX16E reset chip due to inactivity in seconds (Default: 2) Any idea what might be preventing me from hashing? Title: Re: [ANN] Technobit full minig solution 4HEX16e - 600 GHS Post by: ZBC3 on October 03, 2014, 12:06:33 AM As to the TPlink that came with it, what's the default password? I tried root, password, etc.. without success.
Title: Re: [ANN] Technobit full minig solution 4HEX16e - 600 GHS Post by: Zich on October 03, 2014, 01:14:57 AM I need some help with my set up. I flashed my own tplink with 4.0, but am not hashing. All of the defaults were used. My settings are: HEX16E Chip Count (Default: 16) HEX16E Chip Frequency (Default: 300) HEX16E Chip Core Voltage mV (Default: 860) HEX16E pic work roll (Default: 90) HEX16E Enable or Disable Chips Hex (Default: ffff) HEX16E ASIC difficulty HEX16E Enable or disable HEXMinerBE200 automatic reset HEX16E reset chip due to N consecutive HW errors (Default: 5) HEX16E reset chip due to inactivity in seconds (Default: 2) Any idea what might be preventing me from hashing? Try to fill in the value on other miner tab setting. Newly flash tplink did't have any password yet. Title: Re: [ANN] Technobit full minig solution 4HEX16e - 600 GHS Post by: technobitVesi on October 03, 2014, 05:49:13 AM hi,
I did send you a PM for the pass Sorry we missed to write it on the device regards: Vesi Title: Re: [ANN] Technobit full minig solution 4HEX16e - 600 GHS Post by: P4rkeR on October 06, 2014, 10:28:17 PM Hello Support Team,
If I purchase a 4HEX16e now, when it will be shipped ? Thank you very much, Regards, P4rkeR Title: Re: [ANN] Technobit full minig solution 4HEX16e - 600 GHS Post by: technobitVesi on October 07, 2014, 09:53:00 AM Hi,
Thank you for pointing out outdated info on this product. to be shipped on 13-th of OCT |
