Bitcoin Forum

To make purchase easier for US buyers, I now have an official North American Distributor / Authorized Seller for J4bberwock Breakout Boards:

HolyBitcoin.com (http://HolyBitcoin.com)

Scott will resell most of my standard boards, and custom boards have been developped for him that are sold either alone or as a bundle.


Serial n° for the DL 580 G3 PSU are any of the following ones:
337867-001
364360-001
337867-501
406421-001
HSTNS-PA01
AA23530

New product added:
PCI-E to USB and Molex HDD to power your controllers and charge your phones/tablets:

https://i.imgur.com/OwNjncGl.jpg (http://imgur.com/OwNjncG)

https://i.imgur.com/Ro8kNWal.jpg (http://imgur.com/Ro8kNWa)


2x USB ports able to charge Iphone/pad/pod, Samsung,... at full speed
Or simply power raspberries/beaglebone...

1x Molex HDD connector with a cable to power a KNC controller.

The board is a pass through, so you can still use your PCI-E cable to power anything else.

Rated at 3A, over 92% efficiency for the voltage converter, you'll only draw 16w from your PSU if you manage to max out the USB ports and the Moles HDD plug.

Price will be 19$ for the first batch, including one short PCI-E to PCI-E cable and one Molex HDD to Molex HDD cable.



Breakout boards for the Bladecenter H 2880w PSU are now in permanent stock
https://bitcointalk.org/index.php?topic=893159.0 (https://bitcointalk.org/index.php?topic=893159.0)


New models available:
DPS-2000 BB, XL board only

https://i.imgur.com/KaqxGkk.jpg?1

https://i.imgur.com/Q57B2wg.jpg?1 (https://i.imgur.com/Q57B2wg.jpg?1)

DPS-1200 FB A, XL board only for now

https://i.imgur.com/peQ1qR5.jpg?1



Here is the XL version for the HP DL 580 G3/G4 that will allow up to 14 PCI-E 6 pins cables.

http://i58.tinypic.com/5juydz.jpg

http://i62.tinypic.com/v6lxz4.jpg


Anybody interested, please tell me the quantity needed and country to ship.

Pricing will be as follow for all models, excluding shipping

Standard board

1-9 boards = 28$
10+ boards = 25$
60+ boards (group buy) =21$

XL board

1-9 boards = 35$
10+ boards = 32$
60+ boards (group buy) =28$

Shipping estimate (will need your postal/zip code)

Europe
-up to 6 boards or 2 boards with 8 cables, by Fedex, DHL or UPS 15€

-up to 1Kg (15 boards), French post office "small international package" 11€
-up to 2 Kg (8 boards with 32 cables), French post office "small international package" 15€


Outside Europe
-1 board by Fedex 26.5$
-up to 1Kg (15 boards), French post office "small international package" 17$
-up to 2 Kg (8 boards with 32 cables), French post office "small international package" 23$
-6-8 boards or 2 boards with 8 cables by DHL 37$
-8 boards with 32 cables by DHL 44$

Edit: small package pricing not offered anymore by french post office

I would take a few of these. How much would be the shipping for 6 of them to Germany?

Should be in a 13-16€ range via DHL/Fedex, maybe 1€ cheaper with French post.

Okay so what's the total for 6 including shipping with dhl FedEx
Can I pay with paypal. And when could you deliver?

It will be 143€ delivered, you will pay when I'll have them ready to ship in 7-10 days worst case.
Paypal will be ok.

Okay perfect. I take the 6! Just pm me when you are ready to ship and I send the payment.

Does this come with any 6 pin PCIe cables or no?  If not, do you offer them for an additional charge?  Also how much would be shipping to the US?  Thank you.

Ill take 1.

MD/USA for shipping.

Also interested in the PCIe cables if you have a good source.

Thanks

They will come without the cables, I'll receive some PCI-E 6 pins cables to use in my rigs and might have a few spare ones I could sell at cost.

Shipping outside Europe should be the same for almost all countries.

DHL will charge me 44$ for a 6"x8"x8" package, I checked up to 2 Kg
That should hold at least 8 boards and probably 32 cables

I might be able to fit 6-8 boards without cables in a smaller package, like
6"x8"x4" that can be shipped for 37$

Each assembled board is 2"x4"x1.5" (5x10x3.4cm) and weights more or less 50 grams.

French post office, registered package, will be slower but cheaper depending on the weght.
40$ for the bigger package
30$ for 1 to 15 boards alone

I'll check tomorrow it there isn't something like a flat rate international shipping box that could be cheaper

If you can have better price (maybe free or almost at work), feel free to send me a shipping label for your order.

For 1 board alone, Fedex will be the cheapest, 26.5$

I'll update the first post with estimate shipping.

Will these breakout boards work for this psu also? Just to be sure before I buy a few :)
http://www.ebay.de/itm/HP-HSTNS-PA01-ProLiant-DL585-G5-Servernetzteil-PSU-337867-501-406421-001-/310978846881?hash=item4867c8a0a1&pt=PC_Netzteile&quantity=3&autorefresh=true

If so could you quote me a price for 5 boards and 20 pci-e cables shipped to Denmark?

- Morbid

EDIT, They will work, I misread the numbers.

Here is my list of PSU I'll probably do after this one in no particular order.

IBM Bladecenter         2880 watt   39Y7364 / AA23920L
Dell poweredge 1955   2100 watt   X331C  AA24150L
HP DL580 G5             1200 watt   DPS-1200FB A 438202-001

Prices should be in the same range as long as I can get the connectors and at least 20 boards ordered.

PCI-E cables should be something like 2.5$ each.

I'll have a look at the DL580 G5 next week.
If I can make boards for them, they will need from 2 to 4 weeks to be ready to ship depending on delay to get parts.
Do you already have the PSU?

I think there is already a seller for boards for the DPS-1200FB.  Check this thread about the Gigampz, they will be available the first week of September...
Gigampz CS for DPS-1200FBA and other common slot power supplies (https://bitcointalk.org/index.php?topic=622783.msg8745949#msg8745949)

Have you tested your boards for over heating these supplies don't look like they have internal fans and your board covers the air holes at the rear.

I'm currently using the prototype with an ATX adapter to power one of my GPU rigs without any trouble.
5X 5870 overclocked, I don't have PCI-E cables left for another GPU.
The prototype is slightly bigger than the definitive boards, and the PSU does have dual 60x37mm fans inside pushing air at the other side.

I wasn't aware Gigampz were doing the common slot board, it's quite new, but I was doing the boards mainly for my private use, so I'll do them anyway to upgrade my GPU rigs.

Greetings, i'm looking psu to power up my three ant s1, which one do i need ?

Hi, the DL580 G3/G4 1300 watt PSU should handle the load of 3 Antminers S1 (400 watt each). They have even been stressed up to 1600 watt by some people, but I'd prefer to stay within specs.
My 5x overclocked radeon 5870 GPU rig is working perfectly powered with the prototype board, and the rig draws around 1300 watt at the wall.

Please note that my boards aren't in stock yet. I should have them ready next week.
Connectors arrived today, the PCB should arrive by the end of the week.

If you want to have some room for adding an antminer S3, you can also have a look at the DPS 2000BB PSU and the board made by sidehack.

Whichever PSU and board you will buy, use at least 18AWG wires, 16 AWG might be even better if they fit the S1 connectors.

Updated Europe and international shipping cost with some hidden French post office prices (too cheap for them to advertise about those prices)
It's a registered express mail service.

Europe

-up to 1Kg (15 boards), French post office "small international package" 14$
-up to 2 Kg (8 boards with 32 cables), French post office "small international package" 20$

Most or the rest of the world

-up to 1Kg (15 boards), French post office "small international package" 17$
-up to 2 Kg (8 boards with 32 cables), French post office "small international package" 23$

Pic of the bare PCB

http://i57.tinypic.com/k56bf8.jpg

I'll start assembly on saturday

Good news, my cables should arrive on monday, so I'll be able to start delivey either in monday or on tuesday.
I"ll probably start assembly tomorrow.

First boards assembled, I'll start to collect payment.

http://i59.tinypic.com/11ihjmc.jpg

16AWG PCI-Express cables will arrive wednesday.

Put me down for 10 shipped to the UK.

Please send me total price including cables.

When are you hopping to have these ready to ship out?

Thanks.

Hi,
I miss a few screw terminals that should arrive within 1 or 2 days.
Cables will be delivered tomorrow.
Let's say that they will ship by the end of the week.

Price for 10 boards, 50 cables (5 free ones included), shipping via Registered small packet or UPS (usually 2-3 days delivery):
384$
0.75BTC at the current BTC-E price.

Send me your shipping address in PM, and I'll reply with the payment details.

Sorry something I should have asked about before...

I assume the included cables will be 16 AWG?

Also I want to power 3 x S3's off each unit. So will need 6 x PCI-E cables. I know you mention crimp terminals would this safely handle 3 x S3's without overheating the connections. I would also need the extra PCI-E cables to be included in the order.

Thanks.

yes, they are 16 AWG cables, I received them 3 hours ago.
The crimp terminals are rated at 16 amps each, there will be 3 crimp terminals for 2 cables, so 48A of capacity.
Each PCI-E cables will draw 1300/6/12= 18A (max of the PSU), so 36A for 2 cables
Anyway, your S3 is stated as 360W at the wall, it will be less than 15A on each cable.

Safety margin is at least 25% if you max out the PSU and use all the screw terminals.

The screw terminals should also accept 2 wires, 16 AWG, this way, I won't need the crimp terminals.
I'm currently checking this point.


10 extra cables will add 0.05BTC,
It will also be in another weight range for shipping, I'll go for fedex/UPS/DHL for the same price..

Your order is ready to ship.
10 boards with cables already attached since I tested them.
You can pay using BTC (escrow is ok if you want to pay the fees) or paypal.
0.80BTC, 265£, 410us$

Still waiting for news from biggzi and Berliner-Bitcoin-Mining  :-[

So the boards that were made for them are available for sale, and each board already have 6 PCI-E cables attached that I used to test them electrically.

New XL board with up to 14 PCI-E cables available.
Pics soon.

How much for 1 board shipped to US west coast?
Thanks!

Edit: just reread the OP, shoot me a PM, I'd like to order one of these so I can design a safety enclosure for them.
Thanks and cheers mate!

I'll send you one of std and XL design.

Awesome! Shoot me a payment address mate.

Also, where can I pick up a PSU for these? The PSU will help with designing the case for best fitment and I can possibly use the PSU for a miner or two.

Thanks again!

You got PM, give me your postal address, I'll check the delivery price.

I updated the OP with serial numbers for the PSU, they are often selling for 20$ on ebay on your side of the sea.

That makes a very cheap 1300w reliable PSU.

Sweet! Working out a deal for 2x boards +shipping (1 of each style) on trade for 10x ea. style board safety enclosure shipped to J4bberwock  ;D 8)
Thanks mate!

Alright, I've got 2x PSU's ordered for my 2 breakout boards. Stoked!
Now back to work on the DPS800GA breakout board cases!

are this PSU + breakout board + 16 awg cables available?? and how many Pcie cable can run trough break out board?

can you please break down the price for me to decide? thank you

and im ordering 7 pcs HP DPS-1200FBA + 7 pcs breakoutboard + all cables

HP DPS-1200FBA  ( 438202-001, 440785-001, 441830-001 )

Hello, i would like to order 2 standard boards. Needs to be shipped to Germany. Can i pay with btc?
PSU: 406421-001

I replied to your PM

Finally home. Got my boards and the PSU's were waiting here as well.

I gotta say, these look great man! Looking forward to designing and printing safety enclosures for these guys.
Stoked! Thanks mate and I will keep your thread updated.

I've got a custom order for the DPS-2000 BB, so added it to the available for order.
Still a few in stock.

here is the DPS 2000-BB with 6 fans headers to allow 3 fans to be installed on each side in push/pull setup.

https://i.imgur.com/KaqxGkk.jpg?1 (http://imgur.com/KaqxGkk)

And here is the DPS-1200 FB Common Slot board

https://i.imgur.com/peQ1qR5.jpg?1 (http://imgur.com/peQ1qR5)

ill take 2 of these off your hands :-)

do you also sell dps 2000bb>

I still have a few that are most likely reserved, next batch within 1 week.

Nice design..

Yes, they are the good ones.
I will be short of cables for a week, and you might want to try and find the PSU locally.
My supplier wasn't reliable on them.
I've found another one, but each PSU would be 35$

A set with 1 PSU and 1 board would be 70$
For the cables, ask klondike-bar, he should have some stock.
And I remember you, I was going to throw you a message saying that the boards are in stock for when you'd need them.

No more stock on DPS 2000 and DPS 1200.
That was fast.

Next arrival of boards at the end of this week.

As usual, custom order for PSUs not listed are available with a minimum order quantity of 5 boards

I've printed the base for the XL breakout board case and it fits really well. Just gotta test print the modified base (to accept the lid) and print the lid. I will have some actual pics very soon.

I modeled the breakout board which helps me design the case faster...
http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/J4bberwockModsXLBB_zps19b11d51.png (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/J4bberwockModsXLBB_zps19b11d51.png.html)
With the lid mounted.. (sides can be opened more by breaking off the upright supports)
http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/J4bberwockModsXLBB2_zps8d1d61aa.png (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/J4bberwockModsXLBB2_zps8d1d61aa.png.html)

Lemme know if you have any suggestions.
Thanks!

Hi can i have a price for 2 boards for the delta dps 2000bb shipped to the uk. do you accept BTC? And any news on the Proliant DL580 G5 as they are readily available to me, thanks.

Hi, I will have the DPS 2000 BB in stock tomorrow or Tuesday (PCB will be delivered by DHL tomorrow).

The DL580 G5 boards are the "Common Slot" ones, DPS-1200 FB A, XL board
You can see some pics in the first post.
The last ones were delivered on Thursday, I'm waiting for the connectors to arrive on Tuesday, so they will be back in stock on Tuesday/Wednesday.

BTC payment accepted, of course.
How many DL580 G5 boards would you need?
Drop me a private message, and I will reply with a price quote including shipping.

Any chance you could add a 5v Type A female USB header on any of your boards?
This would be a great feature allowing to power 5v devices such as R-Pi, BeagleBone and WRT router/AP's etc.
Thanks!

Oh, I should have pics of the XL board case today.  8)

It can be a 2 or 3$ option for the next batches, I guess.
There are cheap 12>3.3v buck converters, I'll check how cheap I can have a 12>5v converter with 1A supply.

Edit: it can be an option, and price would be 2.5$ for 1A capable port.

I'll mod my files for future batches.

Hi
I want to order and buy one simple set for test: HP DPS 1200/1300W+board+16* PCIE cables
Can you send me offer and your email.

Awesome! Thanks bro!

You got your offer.

PCBs are back in stock, assembly has started.
Deliveries will start tomorrow for orders paid today on DPS 2000 BB and Common Slot boards.

The BTC payment address is 1J4bberWs6f6XVQ53gn3BNc8qHAicmm7wu

All boards back in stock except for the DL580 G3 XL.

Just ordered some of this gear - nice guy to do business with - thanks J4bberwock  ;)

ordered 2 boards for the hp g5. did not use escrow great guy fast shipping Trust score left. Many Thanks.

Thanks for the feedback.
PatMan ordered the same ones with a few cables, his order shipped today.

ugpm . . .

Next breakout board should be for the IBM 39Y7364 BLADECENTER H 2880W PSU.

http://www.innovatepc.com/ibm-bladecenter-2880w-power-supply-astec-aa23920l-39y7349-39y7364/

https://i.imgur.com/k5wN9Bm.jpg?1

This one could allow us to power up to 7 Antminers S3 from a single PSU.
The other good point for this PSU, is the fact that the fans are integrated, so no need to bother with adding fans like the DPS2000

I'll make a small 5-10Pcs batch unless there is more interest in it.

The board will be 2-3$ more expensive than the actual XL boards unless I can find a cheaper supplier for the main connector.

More updates once I'll receive the connectors.

Just received my order, fast delivery, well packaged & quality stuff - excellent work J4bberwock, many thanks  :)

for the blade center PSU - will you make a break out board or similar to hook the supply line into?  Unlike a regular PSU - these ones don't have the standard plug on the back side.  I've seen other PSU this way as well - and they all had that same 3 tab hook up.  I've tried to solder to those tabs in the past unsuccessfully.  

Any idea how loud these are?  I'd be in for a few of these boards, I'll just replace the other mismatched stuff I'm using now.

As for the noise, they will be loud, the fans are probably the same 60x38mm used in many HP servers.

I've noticed this 3 pins connector for the power line. To solder to the tabs, you will need at least Flux, and maybe to remove the gold plating on them.
The mating part is 6-8 weeks delay from the manufacturer, but there might be other options.
I'll confirm them once I receive the PSU after a few tests.

cha - ching !

Transaction ID: 6d29dc0297f38be968e737d3e2df98c4afa23529edbc74d17bfddb028cc4a4ab

just received in the astec aa23920l, this thing is a beast!  the heaviest psu i've ever picked up.

yes, it's really big, but 236A on the 12v rail.
And 3 high flow fans mounted to cool it, so it should be a better watt/$ ratio than the DPS2000.
The breakout board will be a stack of 2 PCBs with 1x C20 plug to power the PSU, I'll probably use 6 pins PCI-E plugs on the board, like on modular PSUs.
They will take less space and will be easier to plug than the screw terminals.
The only bad news for now is that the output plug is only available in 150 or so batches with 6-8 weeks delay.
I was trying to get some samples, but I might be forced to use other plugs or some from a bladecenter case for now.
The 3 pins power plug is quite easy to get.

Here are a few pics from your order

https://i.imgur.com/pHjdcewl.jpg?1 (http://imgur.com/pHjdcew)

and here is how I modded the fans and the packages.
tools used, and step by step.

http://imgur.com/a/5Wwwm#0

Picture of the 5.2 Kg box with the 16 fans, 10 breakout boards and 3 of the C19 cables.

The 14.6 Kg box contains 6 PSUs, 4 C19 cables
The 6.9 Kg box contains 80 PCI-E cables, 3 C19 cables
The 8.7 Kg box contains 4 PSUs.

The DHL guy will hate me, usually, the boxes are 1-2 Kg.

I'll have time to work on the astec aa23920l this week-end, maybe a first prototype for next week.

thumbs up for OP ! no escrow needed at all ! packages arrived to my country awaiting customs. it's really quick.

thx again OP. will deal again anytime !

I will be getting back to the "drawing board" this week and should have at least 1 of your breakout board case designs ready to rock...the smaller board case design should be much easier to design. I will post pics up asap  8)

Thanks, I did a minor revision on the DPS 2000 board, so the earlier orders will probably only need the bottom side of the case.

The switch and the fan headers were moved closer to the PSU to allow easier insertion of the cables in the screw terminals.

Here are some pics from one batch I've just shipped.

https://i.imgur.com/0zi6oAul.jpg?1

https://i.imgur.com/0PQ7wV6l.jpg?1

Very nice bro! Once I get this first shipment back to you, I'd like to pick one of those boards up for making a case. I got another DPS2kBB psu in while I was out of town so I can continue development on those as I've got a great idea for adding fan mounts to the dual-psu racks design I've been working on.

I need 20 DPS-1200 boards asap, please. :)

Can you get them to Atlanta, GA by Monday?

he's not the delivery man but he can send it out real quick though. My big order arrived within 3 working days half way around the globe from OP.

Hi, best I can do is 12 delivered by monday.
The other ones won't be ready until tuesday.

Sold please PM me - I PM'ed you earlier.

I replied earlier today.

Small teaser of the work done so far on the monster PSU:
IBM Bladecenter H, 39Y7364 39Y7349 2880W
AA23920L

The main PCB, 4 layers of 2 oz copper to handle the 240A of power.

https://i.imgur.com/w1ve9Agl.png?1

The test-fit prototype used to adjust placement of the different parts.

https://i.imgur.com/CK0iTJNl.jpg?1

The board will be screwed to the PSU to secure it

https://i.imgur.com/abKSWzel.jpg?1

https://i.imgur.com/ZKWlgVyl.jpg?1

You will need an IEC C19 cable to power the PSU (same cable as for the DPS2000-BB and the HP DL 580 G3 1300w PSU)

Pricing to be expected around 55$ if I can get 50 boards ordered.
The main connector does have a MOQ of 120 pieces.

Very nice work. Looking forward to buying some of these.

At the time of order could I have all the PCIe Power connectors placed vertically in place of the several you have horizontally?

Thanks.

arrived finally some delays @ customs... very good packaging, nothing is damaged, ships on time. thumbs up again for OP. If anyone from the asian region who needs some psu's PM me.

http://i867.photobucket.com/albums/ab234/e6-x/Mobile%20Uploads/20141115_113951.jpg

I am looking for:

DPS-2000-BB PSU + breakout board

It would cost together with shipping to Hungary?

Is it with or without PCI-E cables?

Please note you will need either 6 x standard 60mm fans in push/pull configuration or 3 x high flow ones.
I still have a few high flow ones (loud), same as you can see in yslyung post fo 5€ each.
3x standard or 2x high speed could work if you don't use the PSU over 1400w.

2m power cable for the PSU (EU/schuko plug to IEC C19) = 6€
DPS 2000-BB PSU (tested) = 40€
Breakout board = 28€
6 pins PCI-E cables 50cm long, 16AWG wires = 2€ each

The package will weight close to 3 Kg, the PSU is heavy.
Shipping options to Hungary:
Happy-post, 7 days = 19€
Chronopost(Speedy), 4 days = 25€
Fedex, 4 days = 28€

Hi im looking for board to Delta DPS-1300BB / IBM 24R2714

http://www.rcgroups.com/forums/showthread.php?t=1487643

Do you have it?

Hi, bad news is I don't have it.
Good news, it can be done. in the same price range as any XL board with 2-3 weeks delay (depends on how much I pay for shipping the PCB).
Second bad news, I'll have to buy one PSU for it, and it will add 40€ to the boards price, but I'll ship the PSU to you with the finished boards.

If you want it done, I'll ask you for a 45€/0.15BTC deposit for me to pay the PSU and some labor.

So with this setup we would need to use pci-e to pci-e cables?  I have a bunch of bare lead ones, is crimping the plugs on easy enough?  Or just better offer to buy new ones already made up?  I guess I could always be lazy and butt splice two together to end up with a 100cm cable

yes, PCI-e 6 pins at both ends. It will be easier to plug/unplug cables.
Unfortunately, they aren't making the other gender solder terminal, or we could have bought some extension cables.
I'll order the first boards by the end of this week, I still need to figure if my sandwich plate will be a perfect fit.
1-2 weeks delay to get them delivered after the order.

I'll have some cables in stock, but if you have what's needed to make them, it could be cheaper.
with the right crimping tool, its really easy. It took me 3 trials to put the pin correctly on the tool.
Then, you insert the 5mm stripped end of the wire, press, release, and back to the next wire.

here is the one I'm using, and happy with it.

http://www.aliexpress.com/item/Free-Shipping-SN-28B-Pin-Crimping-Tool-2-54mm-3-96mm-28-18AWG-Crimper-0-1/1758868979.html (http://www.aliexpress.com/item/Free-Shipping-SN-28B-Pin-Crimping-Tool-2-54mm-3-96mm-28-18AWG-Crimper-0-1/1758868979.html)

Quick update on the monster 2880Watt PSU board.

The input board is finally adjusted.

https://i.imgur.com/eNpBSqYl.png?1

I just ordered both PCB.
They are expected to reach me the first week of December.

If everything goes well, they will be assembled and ready to ship by the 4th or 5th.

Pricing for the first ones will be 65$ excluding shipping.
I won't make any real profit on them.

I should have 2 or 3 left for sale.

After this small batch, I'll only be able to continue selling at the same price or even slighly lower if I can have around 50 "preorders".
I'll invest back the 650$ from the first batch of boards, and add some from my funds, to buy a batch of connectors from the manufacturer since there is no stock anywhere, they are only making them on demand.
It's supposed to be 5-6 weeks delay, so I'll order the batch as soon as possible if there is enough interest in the breakout boards.

Pricing for each board will be as follow:
1-25 boards total ordered -> 70$
26-50 boards total ordered -> 65$
51-100 boards total ordered -> 60$
over 100 boards total ordered -> 55$

If a few boards are needed before I get the connectors from the manufacturer, I can have a few as I did for the first prototypes, but individual price for the boards will be close to 80$

Quick update on the Bladecenter H 2880w breakout boards, the bare PCB will leave the factory on monday or tuesday.
They will reach me at the end of the week.

Very nice. Can't wait to try these out.

PCBs arrived this afternoon.
First one almost finished to solder.
I'll post pics later.

And here are the pics of what you will receive when ordering the Bladecenter H breakout board, and how to assemble it to your PSU.
Pics are clickable for higher resolution.

Front of the board with the spacers and screws you will receive.

https://i.imgur.com/bxjyc46l.jpg?1 (http://imgur.com/bxjyc46)

Back of the board

https://i.imgur.com/SWZ6jS0s.jpg?1 (http://imgur.com/SWZ6jS0)

First step, you will need to remove 3 screws from the PSU and replace them with the M3 spacers.
2 short spacers are used at the bottom
1 long (white nylon on this picture) spacer goes to the upper hole.

https://i.imgur.com/eDJjsT3s.jpg?1 (http://imgur.com/eDJjsT3)

Second step, put the clip-on spacers in the holes on the back of the PCB.
Turning them while pressing could help.

https://i.imgur.com/M1AqNjhs.jpg?1 (http://imgur.com/M1AqNjh)

Next step, put the breakout board in place on the PSU, and gently press it until the clip-on spacers are touching the hex holes.
Press firmly the clip-on spacers so the enter the hex holes at the top left and top right side of the PSU.

https://i.imgur.com/1V4Mu5Js.jpg?1 (http://imgur.com/1V4Mu5J)   https://i.imgur.com/IfLe0Rss.jpg?1 (http://imgur.com/IfLe0Rs)

Last step, fasten the 3 screws in the hex spacers, and you are done. Everything is secured and shouldn't move when plugging or unplugging the PCI-E cables.

https://i.imgur.com/Zx4lAxJs.jpg?1 (http://imgur.com/Zx4lAxJ)
https://i.imgur.com/0Teicees.jpg?1 (http://imgur.com/0Teicee)
https://i.imgur.com/aEK2FDts.jpg?1 (http://imgur.com/aEK2FDt)

Connect your power cord, the PCI-E cables and enjoy the high power.

https://i.imgur.com/Dh9kOc5s.jpg?1 (http://imgur.com/Dh9kOc5)

https://i.imgur.com/wr7fY2gl.jpg?2 (http://imgur.com/wr7fY2g)

The board needs 1 IEC C19 power cord, and PCI-e cables with one 6 pins plug at both ends.
The PCI-e sockets are rated 9A on each pin, meaning you can draw up to 27A on each socket.
Only use high quality cables if you go that high. 16 AWG strongly recommended.

Pure awesomeness!

Here is the first order before packaging.

https://i.imgur.com/jC14O6Wl.jpg?1 (http://imgur.com/jC14O6W)

First batch sold out, you'll get 2, MCHouston will get 8, warrensgun will take 1, and the last one is reserved.

Hi!

in a few days my  Astec AA23920L should arrive ... as I want to connect a BIG cable directly to the PSU, I am asking if its possible only to buy the Connector for 230V and the 12V ?

Do you have any internal information about that PSU such as pinouts ? Would be great if this PSU can deliver higher voltages (such as 14V) ... do you have any schematics?

I really appreciate your answer!

Best regards,
Martin

Custom design made for the HP DL 580 G3 1300w PSU

https://i.imgur.com/V0qCXUNl.jpg?1 (http://imgur.com/V0qCXUN)

https://i.imgur.com/QU2gqUnl.jpg?1 (http://imgur.com/QU2gqUn)

These are so awesome. I need to figure out the model number on the psu I have, but I think it's one that would use one of these, I would like one with all PCI-E cables, as soon as I figure out what model psu I have.

Give me a serial number written on it, or at least a picture, and I'll check.
I should have 1 or 2 spares from the last picture, and I need to find a way to completely secure the board to the PSU just in case someone would pull on the PCI-e cables.

Good Morning, I would like to know if the DPS 2880 psu is available for sale with breakout board and pcie cables, and user has to provide cooling like DPS 2000, Best Regards.

Hi, the 2880w boards won't be available until end of January.
I was lucky to get 20 connectors for 20€ a piece to make the prototypes, but they are all sold for now.
I'm still trying to get a few more, but I've got no luck yet, or they were overpriced and in the US.
I'm waiting for the manufacturer to make my orders.

And you won't have to provide a cooling since the PSU does already have 3x high speed pwm fans attached to the front.

BTW, if someone in the US does have access to a server parts broker or recycling company, please PM me, I'm looking for a few small parts.

thanks for quick reply, i need watts sooner than January time frame, so i would like to get quote on dps 2000bb with breakout board, 8 pcie cables, 3 hi flow fans, also i would like to know if fans have proper brackets to attach to psu, and a 50 cm to inch conversion, all shipped to Florida 33010 Best Regards. ps do you accept btc.

Shipping the PSU will probably kill the cost, but I have someone in the US who is stocking boards and cables. And I can arrange something for the PSUs too.

I'll try to gather the price today.
I'm using PCB stands to attach the fans to the PSU, they are working quite well.
I'll check if I still have the pics of this setup.

Please calculate 4 boards for DPS-2000 without PSU and with PCI-E cables. Shipping to Bulgaria.

can you quota me a price for an HP 6 pin PCI-Express 1300 watt Server Power Supply with breakout board and 6 or 12 pci-e connectors.
ty.

Do you have breakout boards for HP DL580 1300W server supply. I would want to buy one board with 4 cables shipped to Thailand. The lowest cost Air Mail service would be fine. Registered can be added if not too expensive. I hope to hear back from you soon.

Hi J4bberwock,
What is the part number of the connector, I can check with my contacts to see if I can get any. I also would like to buy several of these but really would like them before the end of January.

Jabberwock-
I am interested in the boards for the hp1200 DL580 G5 are they instock.
I am trying to figure out cost wise per gh, if I should order the s5 instead
of the c1. I can put two s5's (600 watt each) on one DL580 G5
if I have your board. They need 4 pci-e connectors each so total 8
6 pin pcie connectors off the board. Will that work with normnal or XL?

Do I need an XL I am kind of confused. I pm-ed you also can you please advise?
I would like to order pls contact me.

Hi, the DPS 1200 FBA and DPS2000BB boards are almost always in stock so no worries for them.
They only exist in XL design for now. A smaller PCI-E design similar to the white one for the HP 1300w is on its way, but probably not released until february.

hi could you give me a price for 3 boards for  HP DL580 G3 ML570 G3 power supply 1300 Watts  and 8 pci- 6 pin leads and delivery to uk

Hi J4bberwock,

I'm interested in 3x PSU breakout boards for HP 1300w 406421-001 + cables and shipping to Slovakia.

Thnx

Hi, the HP 1300w boards are currently out of stock.
I should get some back in stock next week.

New board made on special request that will be available with a few days delay:
PSU is DPS835-AB, serial numbers 24R2730 - IBM X3650
It delivers 835w even on 110v

https://i.imgur.com/JOvQgnql.jpg?1 (http://imgur.com/JOvQgnq)

https://i.imgur.com/Gg0IzMol.jpg?1 (http://imgur.com/Gg0IzMo)

Pricing will be as follow:

1-10 boards = 55$
10+ boards = 45$

J4bberwock, what are dimensions of that connector for your new board, as I have some Lenovo DPS-800 PSUs and
these are shorter then HP DPS-800 PSUs. I think its like 31 vs 25pins on one side. So maybe this new board for DPS-835
will fit...

Hi, sorry, but your lenovo PSU uses a card edge connector like the DPS1200FBA. I'll dig a little on how to start the PSU (unless you already know how) and which connector should be used.
If you have at least 10 PSUs to make, and the connectors is easy to source, it may worth it to make specific boards.
Price should range from 30$ to 45$ depending on the price of the connector and  options needed on the board

Hi J4bberwock,

the 12Vsb (stand-by) line will always be live when the system is connected to power. That corresponds to pin B21. To turn on the rest of the PSU, PSON (pin A21) must be shorted to ground (A1-A9, B1-B9). That will turn on the other pins including the +12V rail (A10-A18, B10-B18).

Hi, you got a PM, I may have found the mating connector, but I need a few extra infos since I don't have access to this particular PSU.

thought i would throw a post in here - I sell 24" PCIe---PCIe 16awg cables that are ideal for some of the jabberwocky boards. see my signature link for details

(note: the PCIe-PCIe varient costs a little more and that change isnt shown in my threads pricing system YET - its approx $0.10/cable more expensive than the one-ended varient)

I hope you have some serious stock since I'll have more board soon that will use those cables, and the Bladecenter H board deliveries will start next week.

I have about 100 now, and 300 more arriving around the end of the week. For buyers looking at 150+ direct shipping is available and is cheaper/cable but takes an extra week

Just wanted to thank J4bberwock for the 2880W boards,  these boards are great.  Very easy to go dense with miners with these boards and their well made not a single issue.  Thanks again.

https://i.imgur.com/DzOiYP9.jpg

Well done ! Nice setup :P

Very nice setup, McHouston.

I just purchased 3 of these IBM 2880 watt PSU's myself.  I'm about to order 3 of these breakout boards and 15 AWG cords.

May I ask how many S3's you have hooked up to each 2880 watt PSU?

Also, if you purchased PCI-e cords as well, what length cords did you get?

https://bitcointalk.org/index.php?topic=563461  (my own thread)

I updated all my pricing today to offer better cables at competitive prices.
6" 18awg splitters (M-F-M)
24" 16awg PCIe-to-PCIe (can handle 300W)
24" 16awg PCIe leads (can handle 300W)

these cables should work great with the breakout boards, and 24" (+6" if you use splitters) is sufficient to deliver power to most devices.


as a side note: whats the best reccomendation for a quiet server PSU? I found that the DPS2000 could be cooled by a fairly quiet fan, but has thermal shutdown at ~1400W. Would like to find a way to get high-efficiency power at a decent cost and without the shrieking 40mm/60mm fans that most power supplies have. If its louder than a 20% SP20 fan, its not suitable

To meet that need I was using a double stack of DPS-2000BBs with 120mm fans to cool them.. Had no issue running with quieter 120mm fans provided I had a decent amount of space for airflow.. In more restrictive 19" rack setups with shelves I had to push the 120mm more and it would ended up louder than an SP20 at 20%.

that was my expectation - the lack of a 40mm fan on the 2000BB is something of a blessing. Do you run it with fans on one or both sides, and whats the actual CFM of those fans (I have some 75-110 CFM fans that would be nice, but might lack enough airflow for operation past 70% load

Of the top of my head I don't recall however for low noise I ran a push pull on my really slow ones, I think a push pull of two 110s would be great.. My deployments are all at a data center, I don't actually have any here at the house to look at..

First post updated to announce an official US reseller for the J4bberwock breakout boards.

Jabberwok I need two x DPS2000 plus two x break out boards + shipping to Cape Town South Africa
Can you mail me on j1pvt@yahoo.com with details?
Many thanks

very interested in the 2880 and the break out boards.

When will you have these? I'd like 5 in Canada :D

Sent PayPal payment for 100 * DPS-1200FB PCI-e boards.

great product, very good finish and sends very fast
thank you J4bberwock  ;D

I put 8 S3's on each PSU, that picture was taken with the prototype boards so they only had 16 connections available.  I only use 2 PCI-E cables per S3 and they are able to run at full power and not be in danger of melting the cable.  Most are also overclocked to S3+ setting.  I would keep it at 8 S3's per PSU even if I put the production 22 port version on that shelf.

The wires in the pic are J4bber 36", I choose to use all 36" as the voltage drop was not that much since they are a good gauge and copper.

These PSU's are beasts they will take an insane amount of heat.  In the pic you actually see the intake for the PSU facing the same side as the exhaust from the S3's.  So the PSU is sucking in hot S3 exhaust and having no issues.  (I have redone this)

how mutch for a PSU DPS-2000BB + breakout board + cables, in europe because im from Portugal, so i dont wanna pay import taxs,
please PM me cause im interest in buying 1 with btc ;)

Hi I'm new so sorry for stupid questions.

I have 1 x s3, 1 x a2 mini terminator and 2 x Zeus Lightning both that in their own take 1000w psus.

I'm wondering what I could use to power these instead of psus bought from the store, can your products help and if so what would I need?

Also if so - how noisy and how much heat would these be producing - would I be best of placing everything in the garage?

Cheers

Ps I'm in Australia so if can be done, what would shipping be to Melbourne?

pack arrived and everything already in operation. fantastic and fast power plane for astecAA23920L ... thanks

please give me your legitimate mail that I could write to you. ? thank you.
Good afternoon. I just went to the post office in France and considered sending 1kg load here is the link http://www.colissimo.fr/particuliers/envoyer_un_colis/preparer_un_colis/Essentiel_pour_envoi_du_colis.jsp  service received a total of EUR 25, where you can arrange everything at home and bring the finished sending mail, it's more for a 5% discount can be even cheaper if you send it Petit paquet.
I decided to buy a sample until three boards the old model with screw connection, they will not be heated if I plug the power 1900watt ........ unfortunately I have already bought 6pin wires. On the other hand conventional terminals. I therefore suitable only for the old design vintah.spasibo await your decision with mail?! if you can do me a delivery within 20 to 25 euros by all means send 3 cards on palpay

Good day! you sell me three boards for power supply DPS-2000 BB old-style (screw terminal) + shipping to Russia for $ 120?! say yes or no?! thank you.  :D

I replied to your private message.
BTW, the priority mail international option isn't offered by my post office anymore (Petit paquet).

hello! I do not quite understand how much you have to pay 127 dollars or 117 ?! my translator does not translate half the words) and what do you want me to pay for BTC.? how much is Bitcoin? why not pay palpay better it otherwise I will have to buy Bitcoins?!?!?!

you promised to send today! why are you silent?! !!!!!!!

You got a PM yesterday night.

Here is your tracking number: EW000546215FR

You can also track it on websites like 17track.net

Hi! I need a breakout board for IBM 39Y7349. I can know how much it costs? Still have available large quantities? I will buy one at the moment, then several more. I need you to send to Argentina. I await your response. :)

sorry for the delay, i finaly got the money, do you still have them for sale, ive just send you a pm, im waiting for your reply to make the payment for the psu+cables+fans+breakoutboard

Back from holidays with a quick update:

New design boards with PCI-E plugs instead of screw terminals  have been sold for the last 3 months, I'll take some pictures of them to update the first post.
The following boards are concerned:
DL580 G3 STD (8 PCI-E plugs)
Common Slot STD (8 PCI-E plugs)
DPS2000 BB XL (12 PCI_E plugs)

All the boards including the Bladecenter H 2880w are now in stock.

Double ended PCI-E cables are also available in 24" and 36" as well as custom length.

DL580 G3 XL is discontinued because of the lack of supply on the main connector
Common Slot XL was repleaced by a STD version with 8 PCI-E plugs (more than enough for 1200w)

A new board will also be released soon to allow those with faulty S4 PSUs to have something really close to stock size but with more power (at least 1600w) and that can be powered from 110v.
The product reached its final steps: design of the enclosure that will be attached in place of the original PSU.

Small teaser for the S4 PSU breakout board:

https://i.imgur.com/JdmMhULm.jpg?1 (http://imgur.com/JdmMhUL)

White connector is for the remote switch.

And here are some pics from developpment.

http://imgur.com/a/3G5zL#0

The white plastic sheet was used to simulate thickness and dimensions of a metal sheet for the enclosure.

anyone making breakout boards for dell poweredge 1855 power supply?  let me know, Ian

Not yet, it may be a new one when I'll have some time to work on it.

Hello,
are there any adapters/boards available which can power a KNC Titan (4-8x PCIe, 1600W + 1x5v Molex for Controller)?
Most boards "only" have connectors for PCIe, but I wouldn't like an extra PSU for the Controllerboard. Any suggestions?
Kind regards

I've been working on something to power a Raspberry and optionnally charge my phone from my server PSUs while I'm messing around with the miners. I can make a little upgrade to the circuit board to also output the +5v to a molex connector.
I'll need up to 2 weeks to have some of those boards in hands.

need help, the psu arrive today, but something wrong with it everytime i plug it it short circuits and mainboard of my home electricity shuts off, what can i do to plug it???

hi, sorry, i already find out whats was wrong, one of the screws of one of the fans was touching something inside i open it and fix it, now its working perfectly, thanks

As I said yesterday, the PSU was tested before shipping.
That's the reason why the fans were still plugged in the breakout board when you received them.
I'm getting the fans with bare wires and I add the connectors myself.
Testing before shipping allows to check the following:
-Functionality of the breakout board
-Functionality of the PSU
-Functionality of the fans and correct polarity of the connector

But the brass spacers I'm using could have moved during transport to touch something inside the PSU.

Your feedback will help to improve the service, so I'll add some insulation to the next DPS2000 kits to avoid any future issue.

Do you have the DPS2000 BB XL (12 PCI_E plugs) in stock?
Cost?
UPS Shipping cost of 1-6 boards to Longville, MN USA 56655 ?

Thanks,
PlanetCrypto.com, LLC
Jeff Schlenker, CEO
1199 State Hwy 200 NE
Longville, MN USA 56655

you got PM

And here are the first pics of the boards:

https://i.imgur.com/OwNjncGl.jpg (http://imgur.com/OwNjncG)

https://i.imgur.com/Ro8kNWal.jpg (http://imgur.com/Ro8kNWa)


2x USB ports able to charge Iphone/pad/pod, Samsung,... at full speed
Or simply power raspberries/beaglebone...

1x Molex HDD connector with a cable to power a KNC controller.

The board is a pass through, so you can still use your PCI-E cable to power anything.

Rated at 3A, over 92% efficiency for the voltage converter, you'll only draw 16w from your PSU if you manage to max out the USB ports and the Moles HDD plug.

Price will be 19$ for the first batch, including one short PCI-E to PCI-E cable and one Molex HDD to Molex HDD cable.

Are you offering this as a replacement psu and board for the S4?  And when will this be available if so?  Bitmain is pushing me towards their new psu but it's 220-240 volt, not exactly a replacement for us that have 110-120 volt setups.

Have you tested these with a Neptune or Titan controller yet? I built something similar but used an off the shelf 12V -> 5V 3A step down.. The Neptune spikes above 3A from time to time so I can't keep the controller stable when it is running at more than 2Th or so. I picked up some 8A converters to wire in and haven't had an issue since, haven't measured the actual peak usage though, I know 8A is way overkill.

Thanks for letting me know, it's an upgrade to the one I'm using to power raspberries or charge my phone when I'm next to the miners. no KNC units here.
The buck converter should handle a bit more than 3A, but I'll look at another one just in case it'd fail.
A few units have been dispatched for testing.

Hi, I'm still waiting to get the cages/housings made to hold the board and PSUs, but if you are in a hurry, one board and 2 of the DPS1200FA or similar Common Slot power supplies are the strict minimum you'll need.

Hi J4abberwock,

are you still selling this hardware?

i'm interested in:
2x    DPS 2000-BB  Breakout board
10x  6 pins PCI-E cables 50cm long, 16AWG wires

should be shipped to Germany near Frankfurt.

Best
Stonie

I received a big package from J4abberwock these days and I would like to mention that he is doing a great job.
Shipping was very fast and trackable and after he realized that there was a problem with a few cables (I did not even realize it until then) he sent an additional express package including the correct cables for free. Simply awesome!


Regarding the Titan Adapter I have to say that it works powering the Titan controller, also well done!

One question to the other users:
I just connected my 4-cube Titan incl. Controller to a DPS2000 PSU. Well, not hard to imagine that the PSU is getting hot. How do you cool your PSU? Any recommendations are welcome :)

Just going to raise this question again. How do you cool your PSU? I tried to power an Antminer S5, but unfortunately after ~20 Minutes the PSU switched off and was hot like hell. How do you solve this?

You need to strap a couple of fans to the side of the DPS-2000 to keep it cool. It is meant to run with airflow.. I have  a couple of setups with 3 60mm fans attached, and some double stacked setups with 2 120mm fans to cool both.

Sorry, I totally missed this message.

here is the way I'm doing it with 6x 60mm medium speed fans in push/pull configuration:

http://imgur.com/a/4UWcr#6

http://imgur.com/a/4UWcr#7


3 stronger fans can also be used on a single side for cheaper/louder configuration.

The metal spacers I used in this setup can sometimes short a component to the case (it happened one time to one customer), so I switched back to plastic ones:

https://i.imgur.com/kWhqPud.jpg

Hi, I'd like to get 2 of the 2880w breakout boards, shipped to Taiwan.  Do I pm you address and send payment w/ shipping included?

Edit: 2 boards w/ 6 long pcie cables.  Taichung, Taiwan 406.

Hi,
I am interested for 2pcs of adapter for DPS-1200FB, 8x 16AWG 6pin. Please PM, if interested.  8)

I'll bebback home on friday or saturday. next shipping date on monday.
Shipping from France, let me know where you want them shipped so I can check the cost.

hey

im also interested in 2 boards for the

DPS-2000BB

Would like to have the 12 PCIe cables within the shipment

Shipping goes to germany. Contact me for further details. I really appreciate what you're doing here, nice hobby ;)

PM send

Jabberwock...  Still waiting...

I think he's out of town all week, comms are spotty..

I see

Thanks for that info :)

Does anyone have the pin out for the 2880 PSU power AC cable ?

you have to make your own one.

So far I found this. https://i.imgur.com/IMJUwnj.jpg?1

Hi,

had a quite laggy conversation with J4bber and then send the Funds to him, but did not hear back from him. Has anyone lately recieved Breakout Boards from him?

someone said he was on vacation. Must be cause this thread hasn't been active. ....

might be possible, i hope he will send my stuff soon, he should think about an webshop, would make things a lot smoother.

Sorry, I'm too busy at the moment.
Your board have been shipped with a faster shipping to compensate the 2 days delay, and I sent you the Fedex tracking number in private message.

Got the Shipping Number, but Shipping with Fedex Economy to Germany is a Risky Business... looks like i will wait 2 Weeks for that Package.

Seriously, France to Germany, 2 weeks? There is something really wrong with them, they stated 24-48h delivery.
48h is usually the time needed to deliver to the US once the package is collected.

I also did not have those problems with Fedex. Last time J4bberwock shipped with Fedex to me (also Germany) it did not take more than 2-3 days.

i called them and after they re-routed the Packet to a diffrent agent, I got it deliverd finaly. (The Problem with Fedex in Germany is usually that they have only in cologne their own HUB, everything else is operated via Agent.)
I made quite good expierience with french Post, since they work in Germany together with DHL which is the Number one Delivery Carrier in Germany.

I need two of your 2880 watt breakout boards,and around 40 of your high quality extra long pci-e cables

Need to price that cost vs buying new psus that would come with cables since I have two spare 2880 psus witoute power cables I bought when I thought my breakout boards were bad.

I could also use the long 3 prong power cables you sell as well

Thanks

I am also interested in those long S5 18 pin cables, do you have an open price per with shipping estimate? I guess i'll send you a PM with my information shortly.

Hi. J4bberwok been waiting for your pm. How mutch for a 2880w psu+breackoutboard+14 cables 6+2pcie to plug in 7 r9 280x?

change my order only now ive seen pictures of that 2880w psu, its to big...if you can get me another 2000w pm me
best regards

This is the first time i try to buy something from J4bberwock. Haven't gotten a reply in a few days. Is this is a normal waiting time when requesting to buy some cables here? I'm not in a super big rush but if its not possible to fill my request, i'll have to try to find another place to get long 18 pins cables, hmm...

I have done business with him before.  He's a very busy man.  He also has a LOT going on right now.  I've had to send him a PM and an email and get a reply the next day or two.  Once he replies and tells you he is going to do something, he does it.  Try shooting him a PM again.  He may respond soon.  I'm not sure about posting his email in the thread.  I would do it if I had his permission but I don't.

I'll wait a bit longer, i am not sure i want to pile up more PMs. If he missed it then i guess eventually i'll send another one, but doesn't he read this threads from time to time too? I guess we'll find out.

I also sent a PM for an order still waiting on a reply

I'm very busy at the moment, so I don't answer most of the PM until I have time to give concrete answer.
I actually take a few hours 2 or 3 times a week for the emails/PM.

Regarding the S5 data cables, I should get them in stock just after the chinese national holiday.
I believe I wrote it in the thread about the S5+/S7 controller a few days ago.

Also, I won't take new boards orders until the end of this week.

Okay, i was unaware that you did not have them in stock anymore, i PM'ed you shortly after you said in another thread there was a few left, so someone must of beaten me to it. I'll wait for your restock and your quote.

http://i58.tinypic.com/xng0ag.jpg

http://i57.tinypic.com/2gx1czt.jpg

http://i62.tinypic.com/bfp0w.jpg

http://i59.tinypic.com/4l361h.jpg

this and the result after 5 months of operation 24/24. miner connected s1, s3 sometimes connected the gblade ... but never worked above 70% of the power supply. so far below its current maximum.
I do not say that the system is not intelligent.
on the contrary. and so very comfortable. the power supply and produces very powerful and very hot. especially if you live in a place of summer the ambient temperature reaches 33 degrees.
the power invests its flow of heat directly to the base that already his view the huge and warm current that delivers this power supply.
oe 'defective strip or not' suitable to support the current 24/24 of its outputs pcie. among other things even used them all. now every month I have to move outlets pcie that continually cook ..
including after pcie cable that takes the burned derived from pcie panel.
the base and hot can not last much used 24/24.
For me two things. the base and defective, or does not fit the place where it is mounted in front of the outlet opening of the hot air of power.

If I received the answer I would like the shipment of the new base as I was told .. thanks.
one month the card and to throw so including cables ...

wow that doesn't look to good ;( are there more Reports, that the IBM 2880 PSU and the Mod form J4bberwok lead to such Problems?

ah I do not know. I have not seen anyone use this card. usually they solder wires directly on the output contacts.
I was told that I shipped back another card, but is not responding


the base and 'always very hot, is hit by 24/24 air produced by power supply. brakes for me a little of the air power. and 'the power most powerful I've ever seen. noisy as a turbine but powerful.

This has happened to me on other boards and was usually the wiring I used, I noticed the main source of the heat on my failed boards mostly off of DPS power supplies was where the wire was crimped to the pin.  This seemed to be the source of heat and melted the connector's and wire.

I am not sure if this is your same issue or not.

What did the wires plugged into those look like?

Issues like this are usually traced to the pins in the cables PCIE connectors.  For high current applications like mining you need to use Molex 45750 series pins.  You should also make sure the wires are 16AWG and have copper conductors.  A properly constructed 6 pin cable with these components should be able to handle up to 300-400 watts without getting hot.

Thanks for that info! I bought the Cabel directly from J4bber so i think i'm good.

Hi all,

looks like jabber is really busy at the moment, is there anyone in Germany who could provide a 2880 breakout board and at least 6 pci-cables (36" HQ) ?

Regards
Stefan

You can' imagine how much I'm busy. I've been unavailable for 2 weeks, and have tons of PM/Emails to answer, and boards to manufacture.
Your message is still in the "to read" list.
To give you an idea or price, boards are 60€ for small orders, cables, 3€ each.
I also have some IEC C19 cables with EU plugs, 2 meters long, for 8€.
Shipping to Germany should be 18-20€, maybe a little less, but I won't be able to ship until next week.

Funksy seem busy to. I haven't managed to get any reply from him since the time you referenced him. Hopefully i can get those long cables in the near future, i been needed some for quite a while, now.

If you mean Finsky, then I believe he said in his thread that he is away this week and only has mobile access.

Yes, obviously i can't type for shit. :P Okay then thanks i shall wait longer, while keeping an eye out for some people in North America that could have some to help me out of this tight spot.

I have In Stock a very limited supply of Breakout Adapter Boards from J4bberwock!

I have bundles for the HP 1200 Watt Kit, 1300 Watt Kit, and Dell 750 Watt Kit. Cables Also Available!

Sorry I do NOT have anything for the 2880 or the 2000 Watt Boards.

Hey Jabber I really don't want to push you !!! However If I take your prices I could calculate my order and send you the BTC. I will PM you the TXID and my postal address if this is OK for you. Shipping next week is fine.

60 + 3 * 8 + 8 + 20 = 122 €
Board + 8 Cable + IEC Plug + Shipping
if you are fine with that I'll send you the BTC.

Regards

sorry I was absent for a few days.
the cables are the ones who gave me J4bberwock with the board .
the cables are very good for me.
I do not understand in fact this 'cooking'. I'm trying to figure out the problem.
I'm an electrician
and 'true that the pcie connector on the base and' very hot. I'm not sure that the connector and ruin the cables or the opposite ...
250w should give no problems.
I have other power supplies and other miner and I have not encountered these problems in connectors. once in Zeus miner x2 where the 8-pin pcie have a little blackened. but they have a different type of power supply.
24/24 true that around and under stress, especially if the environment and always on top 35 degrees. keep in mind that the air strikes the base of the power supply connector. may also be in the long run does not help the dissipation of the base and connectors pcie.
remaining of the idea that 'the board most clever I've ever seen

35C is pretty hot--at or above the maximum temperatures for most mining equipment.  Higher ambient temperatures do exasperate hot connector issues.  My recommendations would be the following:

- Cool down your mining setup with better airflow if you can
- I see in some of your pictures, the jabberwok board on the back of the PSU is lined up with the back of your miner and/or the shelf it is on.  I would push it back a couple of inches so the hot air coming from the PSU can flow out from the top and the bottom (and sides) of the board.
- If the connectors get hot, it is only a matter of time before they burn so I would try different cables or re-pin the hot connectors with Molex Mini-Fit Jr. HCS 45750 series pins.  Re-pinning has solved my problem in every case I have come across.
- Double check the type of cables you have.  Jabber sells a couple different types of cables.  The cheaper ones have aluminum wires that would not be up to the demands you are putting on them.

Still looking for a breakout board and at least 6 Cables - anyone in EU could offer me one for sale or loan ?

Regards
Stefan

Where can I buy these adapters? I have 10 x 2880W PSU to be used with 6 cube setups of KnC Miner Neptune and I would really need 10 adapters like this one.

Fuuuck YES .. I need those too .. I forgett to power my controller .. Anyone in EU got those bpoards and could ship one to germany ?

regards
Stefan

Well on the other hand I will build such a modules by myself - 12V -> 3 V Stepdown converter are easy .. hopefully the titan controller doesn't spike to much above 3A ... I plan a "poweroff" function for the Titan where the controler pulls the atx-switch high for some seconds after pull it low again. This should help for switching the titans completly off to get the non working dies again working from remote ..

Regards

I have got three of them from Jabber. I do not need them (never used them) since I no longer have a KNC Titan :(
I also asked Jabber for a few more so that I could sell them on my website. But as you all know he seems to be quite busy.
So for now I have three of those and very few DPS2000 Breakout Boards if needed. Let me know how much you want and I can estimate the costs.
Kind regards

I would like to buy one of those adapters with cable to power Titan's controller. Sent a PM.

Hi, I've been very busy since august, even stopped selling on ebay until I can have some spare stock of everything in the shelves.

Regarding the KNC power adapter, I'll get something new next week.
It'll cost you less than 10 of the orginal adapters. 40$ for 8 Molex ports with the cables and one USB charging port.
Conversion efficiency from 12v to 5v is 95%.

And I still have your address from previous sales.

Pictures and price will be posted on monday/tuesday.

Hey J4bberwock, glad you are back. Would it be possible to respond to my PM?
Thanks :)

Thanks Jabber for the delivery last Week - great quality !

Another question ... this 2880 watt monster is a really great performing PSU but for HomeMining - even 2 floors away it's loud as hell ! is there a way to get the fans speed controlled depending on the load or heat of the components. I know there is one in the RC Group who managed to access the i2c bus and alter the voltage slightly - maybe there is some posibility ?

Regards

The best to do is to modify the top cover with holes for different fans. If you are not too much in a hurry, I'll play with my laser cutter to make a cover and something to close the place where the actual fan pack is placed.
I have the original molex connectors for the fans too, so it will be almost plug and play.

Hi Jabber,

thanks for the offer. I will put my titan to some hosting provider soon - I like to complete hardware mods (change fan, add cooler) to the Titan. I like also to find a way to switch off the psu for some seconds to get the titans complete powerless for them to recover from die-sleep.

Since your breakout board features a solder point for a remote switch I like to use a gpio of the arduino to pull the conection high for some seconds.

Maybe I will trigger some relais which is buffered by some capacitor to hold 2-3 seconds not sure what I like to do.

aynway maybe we will see some homeminer from spondi where the 2880 monster will come in handy - I'm interested in this cover mod ... maybe you can estimate how much it will cost.

Regards

p.s. anyway some isn't there some way to controll the fan by i2c or pwm at the 12V line ?

I would be interested in the fan mod for the 2880's.  They are pushing much more air than required for cooling in my setup.  I have also noticed the 3 fans use around 100 watts of electricity so slower, quieter, more efficient fans would be a real plus.

I am from the U.S. so once you work out a solution, hopefully Finksy will pick some up for shipping in North America.

Please check PM, I sent message about new order. Tnx.

Yes, I saw the message. I'll be away until the end of the year.
Shipping will resume on the 4th of january for new orders.

any word on the 4000w PSUs?

Is it possible to power 2 Antminer S7 with one IBM 2880 watt PSU without additional cooling (beside the "built-in" fans)? Did anyone test this?

I power 2 s7s with the PSU without any issue. Note, psu is rated for DC voltage 2880w not AC , so 2 s7s should consume less than 2600 watt DC.

Sent pm i need 2 4k brakers and 30 pci-e :)

Pm sent!

J4bber,

Can you please ship the order that I've made and paid last week?
I've the miners sitting here waiting for the PSU!
Thanks.

I just sent you your tracking number

Thanks! :)

hello any updates here?

Do you have a web site to make purchase from

Not yet for Europe, I'm taking orders either in my threads, or by PM (email for regular buyers too).
US buyers can find most of my boards at holybitcoin

I have a decent amount of 2000 Watt boards in hand, and I have a limited amount of 4k boards in hand, which I need to take photos of and get listed on website, I can process orders manually before I list them for the 4k boards if you contact me. Just PM me or email me here: holyscott@sent.com

Hi j4bberwock .. do you have 2880w psu with board ?
and can be shipping to malaysia?

J4bberwock it's quite impressive what you are doing. I'm new to this and if I place an enquiry for a custom DPS-1600BB breakout board, is it doable? I can wait and cover additional costs (like buying PSU + work)

edit: oops, just noticed that you have DPS-2000BB boards, which will suit me fine. Sorry!

i'm waiting for some of the dps1600 psu's.

most probably i will make a breakout board for this one.
 

He is offline from 11 days waiting on some news about him :(

On holybitcoin, which one of the breakout boards fits a DL580?

Hello i need some PCI-e cables, 90 cables if you can help me!

I just received a large shipment of new inventory of breakout boards from J4bberwock including 2k Boards and 4k Boards. Sorry but not I do NOT have any 2880 Boards currently available. I have 24" and 36" Cables also available in the US shipping out of New York.

Hi, J4bberwock

do you have 4K breakout boards for connecting 2x DPS-2000BB PSUs located in Europe? I would need 1 shipped to Serbia?

Thanks in advance

Hi all

I need to purchase some PSU and breakout boards with cables, in the EU region.

Is there an EU website, or need I to write a pm to the owner of this thread? Thank you.

You would need to write a PM to the owner of the thread who is located in France.

has anyone got contact from jabberwock, i already send him 2 pm and still no reply, i need to buy some breakout boards but cant buy from US cause im from europe and its to expensive to import....
is there any site, store, someone that its selling them on EU??!!

Same thing here, no reply from Jabberwock for days now :(

For what PSU?

Seems like it's been a while since he's been here at bitcointalk.org
E-mail notifications about PM's should work though.

Hi, people!

I have a server PSU from a Black Arrow Propsepro X-3 with the following connectors:

https://www.dropbox.com/sc/lt3kivyzlc46i41/AAAcITogG_keKQBUoRv51CWga (https://www.dropbox.com/sc/lt3kivyzlc46i41/AAAcITogG_keKQBUoRv51CWga) (couldn't make the image work)

Is there a breakout board available for this? I can't seem to find anything by searching.

Or if I connect wires directly:

Can I assume that the 12V connectors are GND GND GND GND + + + + ?

Which of the small pins do I need to shortcut to get the PSU started?

I would really apprechiate help on this!  ???

http://www.blackarrowsoftware.com/store/x3-psu.html

Here you can find the information of that psu. I can tell you i used this to make a custom breakout and it ran well. But be aware, that PSU were very dangerous...

Wow, that easy! Thanx much, carlosmnk!

I just received a large shipment of J4bberwock 2880 Watt Breakout Boards for the Bladecenter H PSU. I have been out of stock of these for a long time and they usually sell out fairly quickly. I just wanted to give people a heads up that I have them available, in stock, for same day, US shipping. Currently there is a coupon code " Ethereum " listed on the top of my website. Available Breakout Adapter Boards Only, Board and Cables, or Full Kits including 2880 Watt Power Supply.

The pictures look at little off and show only 8 PCIe plugs.

The pictures look at little off and show only 8 PCIe plugs.


The photos on the website are not correct and show the 1200 watt breakout board with only 12 plugs. The 2880 Watt board does have 22x Plugs and has a much different layout configuration. I had not updated the photo yet because I have been out of stock on the board. I will get the photos updated asap to show the correct breakout board to avoid confusion in the future.

hope this isnt thread-jacking, but i have to sell a pair of DPS800GB breakout boards, and can include the DPS800 power supplies and/or PCIe leads with them. PM me if interested - i need them gone

hey guys, looking at getting these for my gpu miners.

Is there any chance of a breakout board that Has ATX and cpu connections on it? would rather use one psu rather then one for mobo and one for the gpus.

Cheers

Be careful with server PSU's when GPU mining.  Especially, if you are using risers.

@dmwardjr - can you explain please? I have both a 2880 and 4k breakout board running gpu's for a combined total of 6 rigs, and just want to make sure there aren't any additional precautions I need to take since I'm running usb risers.

I'm back in business after some health issues.

Most boards models are in stock, and you can expect some new stuff soon for 2017.

First post will be updated with current pictures and all available products.

I didn't know.

Hope you get well soon, M8.

Cheers,

David

It's pretty evident that you have literally no clue about what a server PSU means ;) (no offense, but you need to think about it)

What you requested it's technically impossible, they simply don't exist.

You need to convert the voltages from +12V to obtain +5, +3.3, +5VSB, PSON and so on.

This sector it's too hard for the casual investor, the one that should't play with such costly toys

Now THAT would be SUPER SWEEEEEEEEEEEEEET   ;D

I have over 18 x IBM 2980 Platinum and 15 x IBM 2880 Silver

That would be a larger board for sure on the IBM 2980 and 2880's.

Welcome back  ;)

Let's say that I'm working on it, the prototype works. The main issue, for you, is that they will be patented and inserted in my solutions (in my farm ;) ).

Later on, after the patent, it will be on the markets (I am thinking of lending the machines directly in the farm, like a sort of cloudmining but with real equipment. Too early btw to give details. I haven't got time even to breath  ;D)

For 2980/2880 IBM's ?

not, custom models+pcbs. BTW as I said they won't be available any time soon, so don't bother.

It could require even more than 13 month to a public release, we haven't got the needs to resell them at this stage. We're in short even of our chassis, due company use..

As soon as I'll have news I'll report them.



My best wishes to Jabberwock for a fast recovery. He's a good guy

I hope you didn't use too much of the info I sent you earlier this year ;)
Since the principle of my boards was made public to a few people, it can't be patented (I don't speak about my regular already released boards)

But your main idea is good, I'm sure there is a market probably larger than what you think for the global solution you are planning to offer

Thumbs up...

Hi Jab

To what kind of infos are you referring to? I've contacted you a lot of time ago (march 2016) to order from you daughterboards for a dps1200 unit, never paid and never received due your personal issues (I even contacted first your USA reseller, didn't even know that you were from france). I wrote you a lot of times and didn't receive reply in the later stage of conversation on skype. I've just heard, here from your post, that you're back on track and I wished you a prompt recovery. I am sorry for your health problems but I can assure you that have been a common thing even for me, there's a reason for the delay in the production of my units from feb 2016 until now (and a very important one - cancer )

I am working on a DCDC converter with proprietary PCIE risers, not a daugherboard (that It would even be useful now as a separate component in my projects - IF compatible with them, and I repeat IF - , you can ask to another guy in the US that it's building them - that I contacted a week ago due personal needs. I need to reply to him btw, this week have been very busy for me).

Do you build converters on the secondary, PCIE risers and Fans PCBs? Not, sorry.

In all honesty I would have liked a private reply, not such a veiled public accusation based on nothing, given the fact that I never received any project from you if not a couple of photos of irrelevant importance (it was a PCB for another thing, that I suppose you never built. If I remember correctly an adapter that would have been placed upon the motherboard). You disappoint me and you should sincerely apologize.

Proof of my statements, conversation of the 20th of march 2016 ... (20 march !)


I even offered you to start a personal and company cohoperation, because I trusted your person and expertise, creating for you a portal in EU to support actively your products. We've talked about that here on the forum and on skype, I/you can publish screens if you wish. I give you my auth.

The other photo you've sent me, probably a month later (I don't remember, you should know the exact date), it's about the adapter on the motherboard that I've mentioned before. It's another thing that, frankly speaking, I am not even interested to, due the thermal needs and electrical potential issues on the other components (and even incompatible with my current designs).

I suppose that you're correctly referring to me, but I haven't received any kind of project from you. I am open to publish the conversation, given the fact that I have nothing to hide.

About the possible patents of my company:

- a new tipology of PCIE 16x riser
- a new tipology of cloud computing 16X motherboard interface placed in front of the chassis, and powered by another key element
- a new tipology of power delivery based on server PSUs, that will be able to power on, with ease and reliability, all the other components in my designs
- a new tipology of PCB to support the heat managements of the chassis that I HAVE designed

Do you see anything yours? These products will be offered in my systems, in my farm. I don't even know when and IF I will resell them outside, probably not.

Be careful with your statements, it's not professional to behave like this with your potential customers.

Now that you're back, we could have a talk on skype and clarify this accident. I'm a diplomatic person, open to cohoperate with a positive approach, and common interests. As I said before, welcome back.

Just to be clear, I didn't say that you took my idea and wanted to patent it. I'm sorry if it's what you understood.
As I said, I like your full assembly idea, and I believe the market for it is larger that you may think.

I was just pointing out that if your boards aren't new enough compared to what is already offered by me, others or my upcoming boards (DC/DC converter and PCI-E riser), there is no point trying to patent them.

The concept of the boards can't be patented, you need to use them in a new way nobody did before to be able to patent them.

And I'm not just speaking about my boards, but others breakout boards and the enclosures too.

We are anyway aiming at different markets and may be complementary, so I can't see why there could be an issue here.

Again, sorry if I was misunderstood, I would have made it all private if I had such a problem with you.
And I wouldn't have used a smiley in my first message ;)

Also, thanks for not posting the pictures publicly, the project is still in progress and both boards should be released soon.

Well, a phrase like that have got a few possible interpretations.

Given that I haven't received anything from you in the form of hardware, PCB projects or anything like that, a form or collaboration of any kind implies mutual respect, another thing called honor and coherence. I respected your person, your activity and your products and it's evidence it's shown before, to be precise in my initial offering. The patent thing it's related to a complex product and it's too early to talk about it, due complex arguments that sincerely requires other locations and eventually NDA agreements. If you click in my signature you can even find a photo of a PCB product designed by my electronic team, it's all trasparent and crystal clear (and it has nothing to do with the products that you had in March 2016, when we talked about a potential purchase of some of your products)

I have never robbed anyone in my life (physical or virtual property) and I've got a total respect of the other's work, so please keep in mind that the use of a correct terminology it's necessary, if you kindly ask to be treated in the same manner.

You're telling me in this moment that you are developing a dcdc converter. Even a riser? That's nice to hear, and I wish you the best for both of them but in March 2016 you hadn't anything like, or at least nothing that I was informed of/seen/possessed. I could be even interested, now, to purchase them and start an integration with you in my projects, present and future ones, for a direct resell or mutual use (with your credits/links/agreements/obligations/patents/licences/NDAs/whatever), obviously if they fit my needs and designs. It's called free market, mutual cohoperation and affairs. This means that you can do the same with mine, obviously, but being respectuful of the conditions and rules that we may create ;).

My aim btw it's mainly personal use, the only reason behind these kind of designs from my company it's an electronical indipendence from china. Given that I am in need of a very high amount of PSUs, Risers, cables, chassis, converters, PCBs of a particular kind (that now simply don't exists), I need to build them directly.

It's pretty easy to understand, and frankly speaking it's the main reason. Such solutions won't surely be cheap to produce, I cannot and won't compete with china due the impossibility to compete with that kind of labour payment standards. The unfortunate thing is that I want a product better than that, because of I need to create something unique for my own, with the lowest possible failure rate.

A patent it's a complex thing, and it needs to be done in certain occasions, if the conditions are met without going against rules. That's what I told you, indeed. Different markets and complementary ones, my offering was quite clear.

If you've got something interesting to sell, I am ready to evaluate them; you mentioned DCDC's and risers, let's talk about them privately. I'm a person that believes in honour, words and shaking hands, and I like to create not destroy ;). If you want to publish my, 7/8 months old, messages, as I said I give you my authorization. All of them, so all the others would have the absolute certainity of my statements.

I've got absolutely nothing to hide and I want that this point it's perfectly clear, I take all my legal responsibilities for that. I accept your apologies, and I thank you for that.

As I said before I could be interested in some solutions, so I suggest you to contact me by email (send me a pm with your email, because I don't remember it)

ps: about the photos, I don't share something without authorization, and given my interest, as stated before, I hadn't even any ;)

Limited time discount until the end of 2016 to celebrate the birth of my third daughter.

Any order will get an extra 10% discount no matter what the quantity is.
Orders over US$ 600 will also get a 60$ discount on shipping cost. That will make free shipping on most large orders unless you order cables or live in some exotic country where shipping cost is really high..

Orders will probably need an extra 3-4 days processing time since I'll be quite busy with my family.

Congrats :)

Thanks, I'll try to get a few hours of sleep before mother and daughter come back home tomorrow.
Our girls always woke us up multiple times per night because they needed feeding, diaper changed, bathing because the diaper leaked...
So I'm trying to get some rest while I still can.

Hello Everybody,

I'm new posting here but not new to bitcoin.
Is there anybody out there who knows how to contact jabberwock to buy some of his great boards?

I know there's Holybitcoin.com selling the products but since I'm living in France, it makes sense that I buy its directly from jabberwock himself since he's french too.

Thank in advance for your answers.

Keep Mining!!!  ;)

Send him a personal message here at the forum.

Hello,

Thanks for your answer.
I've send him a pm here and wait for him to come back to me.

Have a good day.

Nice to be back! i Ordered 50 cables 90CM long from him i got the cables all ok!

Thank you

Hello to All,

Unfortunaly I can't say the same for my experience with J4bberw0ck himself.
Since My first post to find a way to contact him on january 18, I send him a pm here on 20, following the instructions of HagssFIN, and get in touch with him on 21.

Then I wait until january 27 for him to come back to me with the precise quote and ways of payment accepted; I made the payment of my order that same day via Paypal.

From this moment, I never heard again for him, althought he told me that all my order was in stock (5 common slot board and 30 cables 60cm).
I have try to know what's going on by sending him multiple messages from here, to his personal mail, and by phone message, but no way, No Answer!

If you follow the story, it's been 14 days now from the payment that I not have any news from J4bberw0ck and of my order.

From what I've read here, J4bberw0ck not seems to act like that usually, but what should I think when after 2 weeks and several mails, I still have no news from the guy?
And for me, the methods are very similar to what scammers do.

My last message to him was yesterday in which I was telling him that without any news from him in 24 hours, I will fill an complaint at the police department and report this order as non deliver in Paypal then let all the community know how J4bberww0ck now act with the clients.

That's said, I'm not excluding that something can going wrong on his side (health, family, business, etc), but man, we doing business; I'm loosing money with that order who is not arriving and he takes the cash so no matter what, he needs to get his client informed.

So Please, Let me know what do you think should I do?

what an idiot !

i & many here would vouch for J4bberww0ck, i've purchased over USD 1000 from the man.

he delivers & if you know how to READ, he's definitely busy with his 3rd daughter. imo family comes first.

be nice. just be patient, he will come back to u.

It's not a scam attempt for sure, it would be pretty an idiot move in all honesty.

If I remember correctly he stated about health issues, it must be this case.

Thanks for your answers

yslyung, you're right for the baby, I've read it here and he told me himself.
I've got 5 kids and I'm 40 so I think I know something about having new babys coming in; and that never stop me to check my mail and answer to the most importants: my clients.

That's said, I agree with you, the reason why I have not intented anything yet.
I will follow your advice; I'm gonna let him come back to me.

I will, of course, let evererybody here know about the issue of this story.

Keep on mining!!!

now that's a gentleman ... be patient, he will come back to you. try to PM him again.

So any idea where is best place to order breakout board for IBM 2000dps from europe??

At the time of writing, nothing have changed for me, so...
And still don't know what's going on.
That's really really not serious at all!

Hey guys

You know what? I'm still in the dark concerning j4bberwock and my order!
No mail, no message, no news, nothing ... no any sign of him.

You guys here, admins or anyone whose in relation with him, can you try to connect him and let me and us here know what the fuck is going on with J4bber?

It really starts to hit me on the nerve this silence.

Thanks to you!

Any news on J4bberwock? I was hoping to get a couple of the pci usb boards from him.

yeah im in need of couple things myself,but looks like hes unreachable again :/ and hes like only one in eu with good quality product?

Hello,

Well, this is a update of my previous posts concerning an order with j4bber.

You know that I've order some board and cable with him on january 28 and  since I had no news.

I finally update the order to a dispute a week ago since I never, never had any news again, and get my money back.

So for those who will voucher for him eyes closed, you should reconsider your trust.
Nobody here is able or want to say what going on with him; maybe seek, have problems of any kind, an accident, has leave us ... I don't know. Who Knows? I just hope it's not an big health matter!

I maybe will come back with some news for Europe based people, to get some board elsewhere, otherwise you have to get them from usa.

I think I still have some breakout boards (and also psus + cables) for dps2000 and the 2880w from him. I never really used them since those PSUs were too loud.
If there is interest I can search for the package and give you the price (around what I paid).

Could be interested !
Please PM me with the list , the prices and your country to estimate shipping. Thx !

Hello,
I am sorry that I did not answer earlier, but this is what I found yet (there is maybe more):
2x http://holybitcoin.com/product/dps-2000bb-dual-4k-breakout-adapter-board/ (including Volt Meter)
Picture: http://fs5.directupload.net/images/170510/temp/cji5fyuy.jpg (http://www.directupload.net/file/d/4717/cji5fyuy_jpg.htm)
Asking price: 70 EUR (each)

2x DPS2000 Breakout Boards like this: http://holybitcoin.com/product/dps-2000bb-breakout-adapter-board/
Picture: http://fs5.directupload.net/images/170510/temp/zyxwghk3.jpg (http://www.directupload.net/file/d/4717/zyxwghk3_jpg.htm)
Also 1 Breakout Board without those PCIe sockets, as you can see on the pic
Asking price: 30 EUR (per Board with socket) / 25 EUR without socket

1x Bladecenter H Breakout Board (for 2880W PSU), but unfortunately I pulled the pins a bit out of it while movinge the whole thing (PSU/Board + cables). I guess it will be easy to solder, but I have no skills for that. Pictures:
http://fs5.directupload.net/images/170510/temp/vqnh5cwf.jpg (http://www.directupload.net/file/d/4717/vqnh5cwf_jpg.htm)http://fs5.directupload.net/images/170510/temp/ofz6gbft.jpg (http://www.directupload.net/file/d/4717/ofz6gbft_jpg.htm)http://fs5.directupload.net/images/170510/temp/c9wtq47s.jpg (http://www.directupload.net/file/d/4717/c9wtq47s_jpg.htm)
35 EUR (since you have to solder it)

I also have at least 2 of those PCI-E to USB and Molex HDD as posted on the first page.
Aaand cables...looots of cables (60-90cm). Examples:
http://fs5.directupload.net/images/170510/temp/lde8dds2.jpg (http://www.directupload.net/file/d/4717/lde8dds2_jpg.htm)
Price 90cm: 3,00 EUR (each)
Price 60cm: 2,00 EUR (each)

Furthermore I have DPS2000 + 2880W PSUs, if someone is interested I can lookup the price.

Shipping with DHL from Germany is extra calculated on your country + total weight. Let me know if you are interested in anything or you have any questions.
BR

Im interested in all those pci-e to molex adapters, and one cable for each of those - 90cm, PM me with price

Anyone based in Europe selling some of those breakout boards?

I looking for it also
anyone??????

looking for them here too in the usa, the 1200 watt supplies are just too damn loaud man

Hi! I looked at your store but I saw that everything was out of stock.
When will these breakout boards be available again for IBM 2880 or DPS-2000  ? (The shipment is for Italy)

THANKS.

Hi, iam searching for And adapter for the murata D1U3CS-W-1300F-12-HA4EC (spondolliers psu) for use in powering asic/gpus (12v)
 Thanks ! http://cdn-eu-ec.yottaa.net/542d8fd6ea2e0c7a100010ea/power.murata.com/v~13.22/media/catalog/product/cache/1/small_image/85x/9df78eab33525d08d6e5fb8d27136e95/1/8/180x102_d1u3cs-w-1300f_3.jpg

do you have any break out boards that will work with SuperMicro (PWS-1K67P-1R)

Thanks

I am looking for a breakout boards  for a supermicro PWS-1K67P-1R does anyone  have anything that will work for this unit or know where  I can find one that will work with this unit ?
Thanks

Look for a board for DPS-1200 FB A posted to the UK please. Thank you

Did PM for a DPS-1300 custom connector but didn't get any response. Could I please make a Paypal payment and buy 1x dps-1300 custom connector?

Please let me know, Delivery to Sanctuary Point, NSW, Australia.

also after 2x "Custom design made for the HP DL 580 G3 1300w PSU" and 16 cables shipping to NSW australia.

Are you still making these?

Regards,
Wayne

I need at least 5 breakout boards for: https://www.ebay.com/itm/263314094676

Dell PowerEdge Switching Server Power Supply 1850W D1850E-S0 TRM9N 0TRM9N New

I just bought a HP 364360-001. Not measuring more than 0.4V at any of the high current pins. Does anyone have a connection diagram for this supply that I can look at before declaring it DOA? I want to buy some of these breakouts but don't want to throw good money after bad.

Z

Disregard. Found everything here........
https://www.rcgroups.com/forums/showthread.php?1005309-A-simple-high-quality-12Volt-100Amp-Power-Supply-Part1/page71

Clicking on view all images in thread I also found this gold nugget........
https://static.rcgroups.net/forums/attachments/3/1/3/5/4/3/a3881869-97-DL580%20G3%20PSU%20Pinout.jpg

There is a wealth of information on many popular power supplies in this thread. Getting them to power up without a breakout board is really easy.

Enjoy!

Z

Hi there.
I'm looking for a breakout board for the HP DPS 1200w.

Kindly PM back.

thanks

Anyone know whats up here? Looks like these boards of all types been out of stock everywhere for months.

I'm curious to know where the 2880w and 4kw boards can be found but I am not having any luck

If nobody else is stepping up to the plate I am an EE and can get it done easy. Should I start a new thread? Which boards do you guys want the most?

Edit: hp PSUs are all super overpriced now, I've been looking into poweredge psu's mostly but can't find any decent breakout boards

I really like the 2880w setup as those PSU's (even overpriced) seem to be everywhere right now.

The ones on ebay look sketchy and I want something with a breakout board.

Hi,

Any chance of getting breakout board for DPS-1400cb A, its 1400w HP FLEX SLOT server PSU.
Have searched everywhere but cant find FLEX Slot compatible breakout board. Please look into it.

Here is link to that PSU: https://www.itcreations.com/view_product.asp?product_id=80235 (https://www.itcreations.com/view_product.asp?product_id=80235)

Need brekout box for a HP Server power supply 337867-501. No luck and only different type plugs everywhere. Maybe there is an adaptor which can be used also?

Is everyone who was doing these boards gone now?
Seems it's impossible to find them

Well, sidehack is still going on strong.  :)
https://bitcointalk.org/index.php?topic=940317.0

I'm cooking up a fresh batch of my Dell 750W boards in a few weeks. Two of those will load-balance to put up 1500W from 120V for a hundred bucks.

I will check out what you got
I really wanted one of the 4k dual dps-2000 breakout boards. but can't find one :(

I'll touch base for some stuff for sure

Anyone knows if DPS-750-AB-1 A or 94Y6669 (For a IBM X3650 M4 server) Delta PSU are common slot compatible or someone know if can be used for mining, my idea is put 2x for an Antminer S7.

Hello, does anyone know where I can get a breakout board for a Xyratex 850W Power Supply DS850-3-002 HS-PSU-850-AC-INT 95882-02 82495-05

 The one I bought on eBay came with a board but there's no writing on it what-so-ever. And I've searched and searched and haven't found anything.

Any ideas??

Thanks  :)


https://i.ebayimg.com/images/g/o54AAOSwxfdasbPi/s-l1600.jpg

https://i.ebayimg.com/images/g/7EMAAOSw8d9UvCjM/s-l1600.jpg

Hello everyone
I am new at this and need some help. I recently bought a new psu DPS-1400CB A HP Flex Slot Platinum Power Supply [ 2 Pack ]. My inquiry is would the psu breakout board adapter that is available abundantly on amazon and ebay, would work with this psu without a problem? I would appreciate anyone comments or advice.

Hi,

Does anyone know what connector (used in the HP DL 580 G3 STD board in the first post) is used for the HP 337867-501?

Looks like an Amphenol PwrBlade to me, but I can't find the right one. (24S 8P?)

TE connectivity has MBXL R/A RCPT 4P+28S+4P.

Thanks Michael

Ps: sorry for reviving this old thread but it was the only usable reference where someone has actually build a breakout board for this psu.

Sorry for being lazy and not searching this thread completely, but I am looking for a breakout board that is compatible with my Delta 750W Titanium 96% Rated, model DPS-750AB-20 A power supply units. The X15 breakout board looks as if it will fit, but it clearly states it is INCOMPATIBLE with this power bar type (as seen here (https://53106-139757-raikfcquaxqncofqfm.stackpathdns.com/wp-content/uploads/2018/10/X15-Breakout-Board-Manual.pdf))

pictures of PSU and power bar are here if needed:

https://53106-139757-raikfcquaxqncofqfm.stackpathdns.com/wp-content/uploads/2019/03/SP50E76346-5.jpg (https://53106-139757-raikfcquaxqncofqfm.stackpathdns.com/wp-content/uploads/2019/03/SP50E76346-5.jpg)

https://53106-139757-raikfcquaxqncofqfm.stackpathdns.com/wp-content/uploads/2019/03/SP50E76346-2.jpg (https://53106-139757-raikfcquaxqncofqfm.stackpathdns.com/wp-content/uploads/2019/03/SP50E76346-2.jpg)

https://53106-139757-raikfcquaxqncofqfm.stackpathdns.com/wp-content/uploads/2019/03/SP50E76346-6.jpg (https://53106-139757-raikfcquaxqncofqfm.stackpathdns.com/wp-content/uploads/2019/03/SP50E76346-6.jpg)

I will need at least five (5) breakout boards for this same PSU, and possibly many more depending on the price. Feel free to PM me if you know where I can find a working board. Thanks everyone!  :)