|
Title: SP20 Help!!!! CGMiner won't start!!! Post by: bgibso01 on December 31, 2014, 10:11:25 PM Just like the title. I've tried factory reset, re entering the pool info, etc. No go. Would like to have this running before I head out tonight. :(
Title: Re: SP20 Help!!!! CGMiner won't start!!! Post by: Dr Charles on December 31, 2014, 10:12:40 PM Have you looked at the "ASIC Stats" page to see if there are any errors coming up or anything unsual?
Title: Re: SP20 Help!!!! CGMiner won't start!!! Post by: bgibso01 on December 31, 2014, 10:16:15 PM Have you looked at the "ASIC Stats" page to see if there are any errors coming up or anything unsual? Yes, no adapter! Title: Re: SP20 Help!!!! CGMiner won't start!!! Post by: bgibso01 on December 31, 2014, 11:27:23 PM It looks like it loaded the Dawson SP10 firmware because that's what it shows on the main screen now.
Title: Re: SP20 Help!!!! CGMiner won't start!!! Post by: bgibso01 on January 02, 2015, 06:04:01 PM After a recovery, everything is back in order. Looks like a PSU problem of the paper clip method not secure enough to keep the PSU stable.
Title: Re: SP20 Help!!!! CGMiner won't start!!! Post by: MrTeal on January 04, 2015, 10:36:45 PM After a recovery, everything is back in order. Looks like a PSU problem of the paper clip method not secure enough to keep the PSU stable. That's interesting. Was the unit resetting? The PS_ON signal is just a TTL level, it's weird that if it worked a little but not at high power levels.Title: Re: SP20 Help!!!! CGMiner won't start!!! Post by: bgibso01 on January 05, 2015, 01:57:47 AM After a recovery, everything is back in order. Looks like a PSU problem of the paper clip method not secure enough to keep the PSU stable. That's interesting. Was the unit resetting? The PS_ON signal is just a TTL level, it's weird that if it worked a little but not at high power levels.I was using 2 HX850 psus. I think one of the wires on the 24pin adapter is loose. I even tried one of the antminer switches and that's where it really showed up as the led would come on and then go off with just the slightest movement. I put it on a different psu and it's been rock solid ever since. Edit: Yes the unit was probably resetting since it wasn't hashing above 500gh/s. But by the time I would notice, it wasn't hashing at all. |