|
Title: S5 work at 625 gh why?.. Post by: jelin1984 on January 10, 2015, 12:15:13 AM Hello
I have one s5 from bitmain The menu I see that all ASIC is available But work ASIC chip only the half pair What might be happen????? Title: Re: S5 work at 625 gh why?.. Post by: philipma1957 on January 10, 2015, 12:15:40 AM Hello I have one s5 from bitmain The menu I see that all ASIC is available But work ASIC chip only the half pair What might be happen????? reboot it. go to the GUI look for systems then look for reboot then reboot. now if that does not work 1) what is your freq ? 350 is stock have you made freq higher then 350? 2) what is your psu ? is it a decent psu ? can it provide 600-700 watts? 3) sometimes you need a lower freq clock say 325 for both rows to work. I found in a cold room my s-5 went as high as freq 412 before your issue appeared. I also need a second fast loud fan to go at that freq of 412 to work. with the stock fan my s-5 liked freq 375 as the max. Title: Re: S5 work at 625 gh why?.. Post by: jelin1984 on January 10, 2015, 12:38:01 AM Chain# ASIC# Frequency Temp ASIC status
1 30 325 46 xxxxxx xxxxxxxx xxxxxxxx xxxxxxxo 2 30 325 47 oooooo oooooooo oooooooo oooooooo look at second sic ooooooo what meaning Title: Re: S5 work at 625 gh why?.. Post by: jelin1984 on January 10, 2015, 12:38:18 AM spedd 650gh only
Title: Re: S5 work at 625 gh why?.. Post by: jelin1984 on January 10, 2015, 12:47:22 AM also final fix it after updated new firmware
which is best fre for have speed at 1300 gh????? Title: Re: S5 work at 625 gh why?.. Post by: philipma1957 on January 10, 2015, 02:06:37 AM the row with all the zeros is a good row.
the row with the x's is bad row. your freq at 325 is okay. that should give you 2 full rows of 0's and mine at about 1100gh so try the reboot and see if it clears up. what is your psu? Title: Re: S5 work at 625 gh why?.. Post by: takagari on January 10, 2015, 02:37:42 AM What's your power supply and how's it plugged in?
Title: Re: S5 work at 625 gh why?.. Post by: Zich on January 10, 2015, 03:50:00 AM Try to check the connector if they connect properly. These thing easily loose on transport.
Title: Re: S5 work at 625 gh why?.. Post by: philipma1957 on January 10, 2015, 04:14:06 AM Try to check the connector if they connect properly. These thing easily loose on transport. good point wait I have a photo the wide connectors going to the controller on top. check them at the controller and at each of the two hashing boards http://imagizer.imageshack.us/v2/1280x1024q90/911/k6OFmm.jpg Title: Re: S5 work at 625 gh why?.. Post by: mriulian on January 11, 2015, 09:29:12 AM Try to check the connector if they connect properly. These thing easily loose on transport. good point wait I have a photo the wide connectors going to the controller on top. check them at the controller and at each of the two hashing boards http://imagizer.imageshack.us/v2/1280x1024q90/911/k6OFmm.jpg nice one. Title: Re: S5 work at 625 gh why?.. Post by: IITravel01 on January 11, 2015, 06:48:37 PM Won't make a difference, but the better way to connect the power is the use the 6+2 pin connector closer to the power supply rather than the 2nd 6 pin connector you've used on the red cable.
|
