Title: ETH mining efficiency 4.1 W / MHS Post by: blue1984 on April 22, 2017, 05:06:30 PM Hallo,
System: 6xSAPPHIRE NITRO+ RADEON RX 470 8G ASRock H81Pro BTC 2.0 Mainboard LGA 1155 Intel Celeron G1610, 2x 2,6GHz 4 GB RAM Super Flower - Leadex Titanium 1600W Netzteil Windows 10 Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.1 I measure the power consumption with a calibrated electricity Watt meter 691 Watt / 168,5 MHS -> 4,1 Watt / MHS get someone better efficiency? Title: Re: ETH mining efficiency 4.1 W / MHS Post by: Vinalians on April 22, 2017, 05:17:16 PM That is much better than my undervolte R9 390 based system.
Title: Re: ETH mining efficiency 4.1 W / MHS Post by: cashen on April 22, 2017, 05:21:34 PM Is this dual mining?
Title: Re: ETH mining efficiency 4.1 W / MHS Post by: blue1984 on April 22, 2017, 05:24:49 PM ETH only
Title: Re: ETH mining efficiency 4.1 W / MHS Post by: evakka on April 22, 2017, 06:47:25 PM Nice setup you got there
I have 1225w and 150Mh/s Title: Re: ETH mining efficiency 4.1 W / MHS Post by: philipma1957 on April 22, 2017, 06:55:23 PM Hallo, System: 6xSAPPHIRE NITRO+ RADEON RX 470 8G ASRock H81Pro BTC 2.0 Mainboard LGA 1155 Intel Celeron G1610, 2x 2,6GHz 4 GB RAM Super Flower - Leadex Titanium 1600W Netzteil Windows 10 Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.1 I measure the power consumption with a calibrated electricity Watt meter 691 Watt / 168,5 MHS -> 4,1 Watt / MHS get someone better efficiency? my panda miner model 1 did 220 mh for 8 rx 470 4gb pulled 1020 watts not as good as yours . Title: Re: ETH mining efficiency 4.1 W / MHS Post by: bittawm on April 23, 2017, 09:39:02 AM Hallo, System: 6xSAPPHIRE NITRO+ RADEON RX 470 8G ASRock H81Pro BTC 2.0 Mainboard LGA 1155 Intel Celeron G1610, 2x 2,6GHz 4 GB RAM Super Flower - Leadex Titanium 1600W Netzteil Windows 10 Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.1 I measure the power consumption with a calibrated electricity Watt meter 691 Watt / 168,5 MHS -> 4,1 Watt / MHS get someone better efficiency? how so low? Title: Re: ETH mining efficiency 4.1 W / MHS Post by: doktor83 on April 23, 2017, 10:24:36 AM 1600w psu a little overkill imo :)
28mhs / card 95w / card Very nice, if true. Title: Re: ETH mining efficiency 4.1 W / MHS Post by: TheRider on April 23, 2017, 10:26:04 AM how so low? I'm thinking a good undervolt + modded BIOS + titanium PSU running around the 50% mark using 240V power source... Very good efficiency. Title: Re: ETH mining efficiency 4.1 W / MHS Post by: digibatapproved on April 23, 2017, 10:35:33 AM What is cost of your setup?
Title: Re: ETH mining efficiency 4.1 W / MHS Post by: Unidonade on April 23, 2017, 10:44:22 AM It is very high efficiency as the speed is fast so it is not very under clocked.
Title: Re: ETH mining efficiency 4.1 W / MHS Post by: ps_jb on April 23, 2017, 10:46:50 AM Hallo, Are you using modded BIOS?System: 6xSAPPHIRE NITRO+ RADEON RX 470 8G ASRock H81Pro BTC 2.0 Mainboard LGA 1155 Intel Celeron G1610, 2x 2,6GHz 4 GB RAM Super Flower - Leadex Titanium 1600W Netzteil Windows 10 Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.1 I measure the power consumption with a calibrated electricity Watt meter 691 Watt / 168,5 MHS -> 4,1 Watt / MHS get someone better efficiency? Title: Re: ETH mining efficiency 4.1 W / MHS Post by: doktor83 on April 23, 2017, 11:04:12 AM He is , because on stock the 470 8gb nitro+ you won't get 28mhs.
Title: Re: ETH mining efficiency 4.1 W / MHS Post by: swogerino on April 23, 2017, 01:06:40 PM He is , because on stock the 470 8gb nitro+ you won't get 28mhs. The nitro+ is always the best version for mining in the RX 400 series. He has done some modification but very little as this version of the card sometimes can do 25-26 mhs with stock settings just by changing a bit the memory. This is the most efficient mining setup I have seen so far in ETH mining here. Title: Re: ETH mining efficiency 4.1 W / MHS Post by: doktor83 on April 23, 2017, 01:08:20 PM Im sure his cards can run 29.5mhs with no problem, but he is probably on 28mhs because of the power efficiency, but then again, raising the mem mhz isn't affecting power usage drastically.
Title: Re: ETH mining efficiency 4.1 W / MHS Post by: 64dimensions on April 23, 2017, 03:07:00 PM Any idea of how much power a celeron saves over an i3 or an i5?
Title: Re: ETH mining efficiency 4.1 W / MHS Post by: deadsix on April 23, 2017, 06:49:26 PM Hallo, System: 6xSAPPHIRE NITRO+ RADEON RX 470 8G ASRock H81Pro BTC 2.0 Mainboard LGA 1155 Intel Celeron G1610, 2x 2,6GHz 4 GB RAM Super Flower - Leadex Titanium 1600W Netzteil Windows 10 Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.1 I measure the power consumption with a calibrated electricity Watt meter 691 Watt / 168,5 MHS -> 4,1 Watt / MHS get someone better efficiency? I have long been obsessed with maximum efficiency over pushing my cards to the max. To that end I managed to get to 4 W/Mh a long while ago on all my systems, and have also ran systems at 3.9 for a while with even tighter under-volt, but they restarted several times a day. Same components as you with Gold psu's instead of titanium I get 160 Mh @ 640W from the wall (actually hovers between 635 W and 640 W as the cards on the fan spin up and down) Your Move ... Title: Re: ETH mining efficiency 4.1 W / MHS Post by: MakeMyDay619 on April 24, 2017, 08:24:13 PM Hallo, System: 6xSAPPHIRE NITRO+ RADEON RX 470 8G ASRock H81Pro BTC 2.0 Mainboard LGA 1155 Intel Celeron G1610, 2x 2,6GHz 4 GB RAM Super Flower - Leadex Titanium 1600W Netzteil Windows 10 Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.1 I measure the power consumption with a calibrated electricity Watt meter 691 Watt / 168,5 MHS -> 4,1 Watt / MHS get someone better efficiency? I have long been obsessed with maximum efficiency over pushing my cards to the max. To that end I managed to get to 4 W/Mh a long while ago on all my systems, and have also ran systems at 3.9 for a while with even tighter under-volt, but they restarted several times a day. Same components as you with Gold psu's instead of titanium I get 160 Mh @ 640W from the wall (actually hovers between 635 W and 640 W as the cards on the fan spin up and down) Your Move ... Huh, I bought miner from ZET Technologies (they post sometimes on this forum) and my miner 6x470 4GB (no nitro) has 160MH with just 600W for ETH and 160MH ETH + 900 MH PASCAL on 820W (measured at the wall). Bittawm, now you now why I could let the pandas go :) Can someone explain that? Title: Re: ETH mining efficiency 4.1 W / MHS Post by: Unidonade on April 30, 2017, 02:39:20 PM Any idea of how much power a celeron saves over an i3 or an i5? About 10 to 15W. Title: Re: ETH mining efficiency 4.1 W / MHS Post by: Ambros on April 30, 2017, 02:43:19 PM Hallo, System: 6xSAPPHIRE NITRO+ RADEON RX 470 8G ASRock H81Pro BTC 2.0 Mainboard LGA 1155 Intel Celeron G1610, 2x 2,6GHz 4 GB RAM Super Flower - Leadex Titanium 1600W Netzteil Windows 10 Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.1 I measure the power consumption with a calibrated electricity Watt meter 691 Watt / 168,5 MHS -> 4,1 Watt / MHS get someone better efficiency? I have long been obsessed with maximum efficiency over pushing my cards to the max. To that end I managed to get to 4 W/Mh a long while ago on all my systems, and have also ran systems at 3.9 for a while with even tighter under-volt, but they restarted several times a day. Same components as you with Gold psu's instead of titanium I get 160 Mh @ 640W from the wall (actually hovers between 635 W and 640 W as the cards on the fan spin up and down) Your Move ... Instead of just bragging about configurations and results, what about sharing some knowledge about how you reached those levels? Title: Re: ETH mining efficiency 4.1 W / MHS Post by: coinzoid on April 30, 2017, 03:33:17 PM 1600w psu a little overkill imo :) 28mhs / card 95w / card Very nice, if true. Yeah, maybe he can get most out of it by adding additional gpus and dual mine. Title: Re: ETH mining efficiency 4.1 W / MHS Post by: deadsix on April 30, 2017, 03:41:29 PM Instead of just bragging about configurations and results, what about sharing some knowledge about how you reached those levels? How in the world are you attaining that? I'm assuming he:underclocked CPU undervolted CPU undervolted system RAM undervolted GPU cores undervolted GPU RAM underclocked GPU core using custom memory straps overclocked GPU RAM That about right deadsix ? Pretty much :) Title: Re: ETH mining efficiency 4.1 W / MHS Post by: induktor on April 30, 2017, 04:11:50 PM Impressive efficiency for an AMD setup!, very good!
the expensive PSU helps but the real deal is the NITRO+ with the modded bios and very precise tweaking. good job! I can get significantly more efficiency than that but with NVIDIA gpus (that costs 50% more money) so yeah... your setup rocks :) because at the price of your rig, it is almost impossible to have better efficiency than that. A friend of mine says that i have Power Efficiency TOC hehe, yeah, i am freaking obsessed with mining efficiency, that's why i use NVIDIA cards instead of AMD, and i don give a damn if they cost 50% more because i pay so little on power (and power here is EXPENSIVE!) that i can sleep like a baby, also my flat doesn't have like 40C all day because of the heat of the rigs (i remember when i had like 20 R9 280X here, Oh my, it wasn't the power consumption the problem, it was he HEAT, it was hell!!, even in winter, i had all the windows open, like -2C outside and 32 C inside, insane. cheers indtk. Title: Re: ETH mining efficiency 4.1 W / MHS Post by: deadsix on April 30, 2017, 06:12:11 PM Impressive efficiency for an AMD setup!, very good! the expensive PSU helps but the real deal is the NITRO+ with the modded bios and very precise tweaking. good job! I can get significantly more efficiency than that but with NVIDIA gpus (that costs 50% more money) so yeah... your setup rocks :) because at the price of your rig, it is almost impossible to have better efficiency than that. A friend of mine says that i have Power Efficiency TOC hehe, yeah, i am freaking obsessed with mining efficiency, that's why i use NVIDIA cards instead of AMD, and i don give a damn if they cost 50% more because i pay so little on power (and power here is EXPENSIVE!) that i can sleep like a baby, also my flat doesn't have like 40C all day because of the heat of the rigs (i remember when i had like 20 R9 280X here, Oh my, it wasn't the power consumption the problem, it was he HEAT, it was hell!!, even in winter, i had all the windows open, like -2C outside and 32 C inside, insane. cheers indtk. So whats your Ethereum mining efficiency with Nvidia? Lets see if we can top it with AMD :) Title: Re: ETH mining efficiency 4.1 W / MHS Post by: Marvell1 on April 30, 2017, 10:31:53 PM Hallo, System: 6xSAPPHIRE NITRO+ RADEON RX 470 8G ASRock H81Pro BTC 2.0 Mainboard LGA 1155 Intel Celeron G1610, 2x 2,6GHz 4 GB RAM Super Flower - Leadex Titanium 1600W Netzteil Windows 10 Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.1 I measure the power consumption with a calibrated electricity Watt meter 691 Watt / 168,5 MHS -> 4,1 Watt / MHS get someone better efficiency? I have long been obsessed with maximum efficiency over pushing my cards to the max. To that end I managed to get to 4 W/Mh a long while ago on all my systems, and have also ran systems at 3.9 for a while with even tighter under-volt, but they restarted several times a day. Same components as you with Gold psu's instead of titanium I get 160 Mh @ 640W from the wall (actually hovers between 635 W and 640 W as the cards on the fan spin up and down) Your Move ... Instead of just bragging about configurations and results, what about sharing some knowledge about how you reached those levels? Title: Re: ETH mining efficiency 4.1 W / MHS Post by: Vinalians on July 04, 2017, 10:29:40 AM Hallo, System: 6xSAPPHIRE NITRO+ RADEON RX 470 8G ASRock H81Pro BTC 2.0 Mainboard LGA 1155 Intel Celeron G1610, 2x 2,6GHz 4 GB RAM Super Flower - Leadex Titanium 1600W Netzteil Windows 10 Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.1 I measure the power consumption with a calibrated electricity Watt meter 691 Watt / 168,5 MHS -> 4,1 Watt / MHS get someone better efficiency? I have long been obsessed with maximum efficiency over pushing my cards to the max. To that end I managed to get to 4 W/Mh a long while ago on all my systems, and have also ran systems at 3.9 for a while with even tighter under-volt, but they restarted several times a day. Same components as you with Gold psu's instead of titanium I get 160 Mh @ 640W from the wall (actually hovers between 635 W and 640 W as the cards on the fan spin up and down) Your Move ... Instead of just bragging about configurations and results, what about sharing some knowledge about how you reached those levels? I think it is not that big. With 2% difference, it is about 20W. Title: Re: ETH mining efficiency 4.1 W / MHS Post by: iamnewhere on July 04, 2017, 10:43:50 AM I just get 175 MH/s @ 840W from wall (130W per 1070 shown by nvidia-smi) - might get it down another 40-60W but not down to 700W :o
Title: Re: ETH mining efficiency 4.1 W / MHS Post by: spyshagg on July 04, 2017, 04:51:18 PM Hallo, System: 6xSAPPHIRE NITRO+ RADEON RX 470 8G ASRock H81Pro BTC 2.0 Mainboard LGA 1155 Intel Celeron G1610, 2x 2,6GHz 4 GB RAM Super Flower - Leadex Titanium 1600W Netzteil Windows 10 Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.1 I measure the power consumption with a calibrated electricity Watt meter 691 Watt / 168,5 MHS -> 4,1 Watt / MHS get someone better efficiency? 5 x 570 140MH/s / 530watts = 3.78w /Mhs (All system) |