Bitcoin Forum

Hey guys just wanted to share a quick frame design that i have built under $25 and 20 min.

https://www.amazon.com/gp/product/B01M0XLTT5/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1

Buy following shelf from amazon $20

Buy 1 8 ft 2x2 from Homedepot or lowes. & 1 8 ft 2x1

https://i.imgur.com/D07ILVn.jpg



https://i.imgur.com/zu81D1z.jpg

Set it up like i did. took it me 20 min to cut the height and length and 5 min to screw them together. They are zip tied to the frame. and risers are screwed it as well.

the length of 2 bars where risers are resting is 32 inches
the 2 bottom piece is 8 inches
the 2 pieces standing on the pole is 7 inches tall and
the 2x1 is also 32 inches for screw-ing and zip tie graphics card securely.

Good luck and let me know your thoughts. 

the white risers looks really great
which gpus are you going to select for this rig?
more pictures when it is done will be really appreciated

Nice one ! be careful if you put the motherboard on steel part of rig there is the risk of short circuit! :P

poorly thought out design, no place to mount mobo or anything else. that's not a rig frame. at the very least its only a gpu holder at best. good fire starter though since you used wood

I go to homedepot or lowes and buy 3/4 aluminum angle 8 ft usually two are good for one 6 gpu rig I think they cost $9 each and I cut them to what I want than drill and rivet the frame together if you don't have a rivet gun you can use self tapping screws but I can cut drill rivet the frame together in 15 mins it takes me longer to setup and clean up than to build

I goto lowes too, and there more than 9 dollars rofl atleast at the one here in Washington state its like about 15 for an 8ft section of angled aluminum, depends on the area there in but all the same yeah 2 8ft sections is what I use as well for my rig frame, pop rivets which look soo much better than a self tapping screw which protrudes, pop rivits also don't back out and become lose like screws do

Hope it is sturdy. Looks cheap but as said possibility of shock cricut.

Towel rail from ikea is less than $10..some insulation tape and a off cut of flooring, sorted. you could even add another 2 shelves to it if wanted and its easy to pick up and move around https://photos.app.[Suspicious link removed]/bzqUy4PZKcbtM6373

Really? Did you know wood is an insulator and is sued in electrical applications because of it?

DERP

https://i.imgur.com/WopxwAI.jpg

rig complete I am putting a wooden bracket underneath motherboard to mount it.

also i put anti static bag always so it doesn't short circuit.

7 gtx 1070ti = 3450 sols 70%tdp and 200+ core and 500+ memory

750w evga gold (power 3 cards-3 risers and mobo and cpu) and 900watts hp server plantinum on top to power 4 cards and 4 risers


Yes i am going to do a better job with cable management when I have more time.

what an awful build and such a waste of space, btw 2 psu's is a thing of the past nowdays

@cryptowatcher420
https://i.imgur.com/tWfTtyG.jpg

thats my  normal build but it takes 3 hours from design to construct.

please let me know your constructive feedback.

with 2 psu i was going for cheaper option total cost $170 vs $300+ for 1300watt gold.

Good job I just have 2 things on your normal build - since you're doing the building, why put it so high so you have to use zips? Cut it the right length so you can screw the GPU's in .


Also you have room on the sides, move those supports to go over the PSU's, so it gives you a bit more room to spread the GPU's out - the frame is already that width, might as well use it.

great tips. thank you. I am on my 6th rig, perhaps on 7th i will build it that way. but spreading out gpus is  a good idea.

its also catches fire real easy, when you go cheap like that and you've got a room full of rigs in your HOUSE, it only takes 1 of them to malfunction in such a way that your whole house goes up in flames potentially putting not just you in danger but others as well. good way to not think of other peoples well being except for yourself

DERP

A little self righteous about your views on how many PSU's are the "in thing" aren't we?

I still have rigs with 2 PSU's it doesn't bother me, I have a bunch of rigs with 1600w EVGA T2's as well.

Both of them work PERFECTLY FINE so it doesn't matter WTF you use, just get it built.

2 850's is a lot cheaper, $300 give or take vs $500 for my 1600's. Either one works. More than just one way to do things, just because it's the way YOU do something, doesn't mean everyone else has to adopt it.

I agree with you, i prefer to build my rig 2x PSU's, it doesn't take much more space, make's it alot easier to deal with dual-8pin cards because you have alot more connectors, and is cheaper to go (2x800w cheaper than one 1600w and not counting all the adaptaters you'll have to buy (6pin to 8 converters, Y cables, and so on adding failures points), and i have more confidence in the stability of the power over long run. It even make more sense to me for 8-10 card rigs. Getting server psu's here is really annoying, and it's mostly sold out all the times so....

Keep up the good work OP, go and refine your designs !

an atx psu is more of a failure point there bud if you wanna talk that route, server psu is also made for harsh enviroments, atx psu is not. last I checked using 1 outlet vs 2 is better. btw if you know what your doing with the server psu its not a pain in the butt, its actually quite easy. also dunno where you are looking for those server psu's cause I don't have issues finding them and guess what for much cheaper than an atx of the same wattage, I can pick up a 1500w server psu for about 125 bucks, can you pick up an atx psu for that much, hell no. also 2 psus creates a big failure point if one psu dies depending on which one, gpus or other hardware could be damaged, id much rather have the WHOLE rig shut off, the price you paid for 2x 800w platinum psus, id done picked up 1500w for cheaper than BOTH of of those together, 800w platinum atx psu still going to run you around 80 to 100 bucks. the idea here last I checked is efficiency no? to spend the least amount of money possible while getting the most profit? sound familiar? btw breakout board for hp 1500w server psu is about 15 dollars and then youd need a pico psu which is another 13 dollars, still well below what you would spend on 2x 800w platinum psu's that are fully modular, my rigs run all the same, only difference is that I didn't spend as much as you did on power supplies, rigs run days on end, months, without ever being touched unless there is loss of power or miner software update or OS update. which it does on its own. using a server psu is more stable than you think you know

Yoiu're not running server PSU inside a residential home, one you're trying to live in anyways.

If you buy janky atx psu's yeah, sure i see an issue. I'm willing to bet the farm I'll never have an issue with my EVGA's, and even if I do, I have about a dozen 850's just sitting on the shelf on standby. A good Jew always has at least 2 of everything :)

Fire rated wood.  Problem solved.  There are a lot of things in a persons house that could cause a fire just as easy.  And guess what ... The house is made of wood.  Do you live in an aluminum shed because you're afraid electricity and wood is too much of a risk?  Lol.  Why are you talking to him like he's an idiot? 

I use 36" laminated shelves from HomeDepot ($8) and then some 36" long 3/4" square dowels ($3 each)  to built 8x GPU rigs like this:

http://www.cstone.net/~dk/miner03_lr_01.JPG

http://www.cstone.net/~dk/miner01.JPG

http://www.cstone.net/~dk/8xTi_miner1.JPG

Yes, the rigs are all in my living quarters during the winter to provide all the heating I need.

But going forward, I'm going to be using mobo's meant for mining like these:

http://www.cstone.net/~dk/8PCIe%20mining%20boards.JPG

No more riser rigs for me!  ;)

Exactly!  He was starting to sound like he also wears a tinfoil hat in the aluminum shed that he lives in.

Nice!  Any issues with that board?  I have been looking at them.

Nope, both the Onda D8P and the Colorful boards are rock solid.  Only change I made in the BIOS was to change to PEG for the video.  Haven't bothered updating either BIOS either since they just work, but I probably will at some point.  Running nvOS on them.

Very crafty, I love the laminate board crazydane!


Since everyone is sharing here's the "MINING RACK" that I use:


https://www.bedbathandbeyond.com/store/product/seville-classics-3-tier-mesh-utility-shoe-rack-in-satin-bronze/1061424241?skuId=61424241&mcid=PS_googlepla_nonbrand_storage_online&product_id=61424241&adtype=pla&product_channel=online&adpos=1o2&creative=224122691883&device=c&matchtype=&network=g&mrkgadid=558368192&mrkgcl=609&rkg_id=h-1d75a1d10d20d7731b4ba876e293aa4c_t-1512881020&gclid=Cj0KCQiAsK7RBRDzARIsAM2pTZ8bA3vhyAG9j62jd5YQSSlw9NMEpGHHHOlK6WQLkg-bVV3PzQXewowaAmLAEALw_wcB



https://i.imgur.com/pvc79IZ.jpg


Yes, it's all metal but I've been running these almost a year, not one issue, no shorts no problems. Underneath my mobo I cut to spec from a foam tile, they're cheap AF and I had a ton of them in the garage already. Something like 5 or 10 tiles are like $10 at costco, 1 tile can do 5 mobo's so yeah, it's not expensive.

Thank you for sharing all the awesome home built rigs and pics. I really like the homedepot board one thank you @crazydane.

Server psu @150$ aren't brand new, so they may be more of a failure point than you think too, but that's another story  ;D

I work in datacenters so i know that a server PSU is the best in some areas, but the problem is that were i live i cannot source old/refurbished ones or even pico psu/breakout board they're sold out all the time, and the customs import tax/shipping are murder if i want to source them elsewhere, that's the whole issue with it, otherwise i would have tried to run server psu's long time ago. And even through my work i didn't find a way to source refurbished PSU's that are compatible with the current breakout board we see on mining shops, we just don't use those they're either too old or not the brand we use.

That said ATX psu's of the right quality are good and proper, they often have warranty going from 7 to 10 years, i don't run them more than 60% load, been 2 years i've been mining and never had one failure (20 rigs so 40 psu's) not even one warning at all.

I think both solutions have merits, server psu have density, cost, resilience and atx have availability, less hassle (no need for special cables, or pico atx), low noise, warranty (yes 7 to 10 years, server psu's are often refurbished so no warranty, and you don't buy them brand new because it cost an arm & leg)

As i always say, if it works, why not use it. If i could source some breakout board and server psu's compatible i'll be more than happy to test it out. You do what you can and try to maximise your efficiency with what your location, situation, environment, is giving you.

I make mine for about $10 USD from a bit of aluminium angle and timber;
https://i.imgur.com/90RYxp8.jpg

Cut short side at bend points and bend to rectangles 280mm * 320mm;
https://i.imgur.com/KuFN2OK.jpg

Secure to timber using wood screws;
https://i.imgur.com/CY0BtBt.jpg

The most satisfying screw of the day;
https://i.imgur.com/5xzr9Q6.jpg

STRENGTH!;
https://i.imgur.com/qOOauFC.jpg

Vary the base and support lengths depending on rig size, I like 440m for 4 cards, 550mm for 5 cards and so on. Easy to remember. Here is a 4 card and a 5 card frame. You can also see spare angle is used for guide channels for PSU and HDD;
https://i.imgur.com/UPygwLd.jpg

Just use felt under mobo and here is a 4 card rig finished product;
https://i.imgur.com/Y7tq7jr.jpg

yall are too cheap to spend the extra money on fire rated wood, come on now. btw people in general are idiots. consensus says those that use wood will go for whatever they can find that's the cheapest. title of this thread says it all. also on a side note my house is wood all the same as most peoples houses are, thing is it depends on the application which should dictate when and where what is used, if you've ever seen atleast pictures of what a rig fire can cause, its not something anyone wish's to happen but it can and its not usually pretty. why increase the chances of making it worse by adding something like cheap wood where it shouldn't be lol

What board is that?  I wrote down the model (or what I thought was the model) from the box that it's sitting on, but apparently that isn't the one.  Just noticed it was a lot wider than the box it's sitting on ... Lol.

Resourceful!  Can you please post a link or name/PN for the PSU distribution board that you have on top?  (Obviously don't know what it is called or I would google it!) ???

this thread is filled with amazing content
great work @crazydane and @crypticj
quality threads like this are hard to find
btw what you all mining?

I mine whatever is most profitable being agnostic to specific coin helps.

sniffdogminer works great for me.

Those are really some nice rigs that everyone put up. But back to the original post, although your rig layout looks great you might want to spend a bit more money on a professional rig frame. I wouldn't try to save a penny here or there because you need to think about the repercussions of cheap wood---causing fire--- and bare metal ---electrical shorts. Take it from me, I spent about $30 on woods and screw and after 3 months --- luckily I was home --- the excessive heat on one of the GPU started sparking out and literally sparked and started smoking on the rig.  Spend a bit more on peace of mind.

What's funny is people do this type of rig before you yet you pick on him.  So what makes difference with him and the others?

Motherboard can sit on the cardboard.  I done it.   I push the room temperature 110F and nothing burned.   8 months in a row.   No issues with metal racks.   I don't waste money on those highend rigs eventually I would throw it away if I'm done mining.  At least with that rack I could reuse.

Wood or not wouldn't make difference preventing fires because outlet and home wiring and the carpet is like 90% and wood is just small part of the problem.   People done rigs on wooden frame.