|
Title: RTX 3080 hashrate drop list Post by: agente on November 07, 2020, 09:20:45 AM It would be useful to list all brands (please specify MODEL) with and without memory temp problems with eth hashrate drops:
Good ones that don't throttle: EVGA FTW3 MSI Suprim X Asus Strix Palit GameRock KFA2 GeForce RTX™ 3080 SG (1-Click OC) Some throttle, some do not: Asus TUF https://www.reddit.com/r/EtherMining/comments/jxfoac/3080_thermal_throttling_thread/ (https://www.reddit.com/r/EtherMining/comments/jxfoac/3080_thermal_throttling_thread/) Zotac Trinity Palit Gaming Pro EVGA XC3 (https://www.reddit.com/r/EtherMining/comments/jxfoac/3080_thermal_throttling_thread/ge5pnoa/?utm_source=reddit&utm_medium=web2x&context=3 (https://www.reddit.com/r/EtherMining/comments/jxfoac/3080_thermal_throttling_thread/ge5pnoa/?utm_source=reddit&utm_medium=web2x&context=3)) MSI Gaming X Those that throttle: Gigabyte Gaming OC, Eagle OC, Vision OC (replacing thermal pads fixes issue) Nvidia Founder's Edition (replacing thermal pads fixes issue) MSI Ventus (need to keep under 60c - https://www.reddit.com/r/EtherMining/comments/jxfoac/3080_thermal_throttling_thread/gcycwa3/?utm_source=reddit&utm_medium=web2x&context=3 (https://www.reddit.com/r/EtherMining/comments/jxfoac/3080_thermal_throttling_thread/gcycwa3/?utm_source=reddit&utm_medium=web2x&context=3) For confirmation: Gigabyte Aorus Master; Aorus Extreme Colorful Zotac Holo! AMP Galax / KFA2 Title: Re: RTX 3080 hashrate drop list Post by: safar1980 on November 07, 2020, 04:14:49 PM All these video cards have a reduced hash rate after memory overheating, many miners praise Palit GeForce RTX 3080 GamingPro, but it also requires additional cooling or replacement of thermal pads.
In stores now there is a shortage of any 3080 videocards, so it will be difficult to purchase a specific model. Title: Re: RTX 3080 hashrate drop list Post by: jgonzi on November 07, 2020, 07:38:47 PM It would be useful to list all brands (and model) with and without memory temp problems with eth hashrate drops: YES: Founders Edition (?) ASUS TUF Gigabyte EAGLE MSI (?) NO: Gigabyte with a change of thermal pads +100Mhs Title: Re: RTX 3080 hashrate drop list Post by: philipma1957 on November 07, 2020, 09:21:05 PM Who cares you can not buy them. And if they sell they may all have new parts. I am thinking lots of empty christmas stockings as we simply can not buy them.
Title: Re: RTX 3080 hashrate drop list Post by: sakmsb on November 07, 2020, 10:10:50 PM Gigabyte with a change of thermal pads +100Mhs Link for those thermal pads please Title: Re: RTX 3080 hashrate drop list Post by: agente on November 08, 2020, 09:14:54 AM It would be useful to list all brands (and model) with and without memory temp problems with eth hashrate drops: YES: Founders Edition (?) ASUS TUF Gigabyte EAGLE MSI (?) NO: Gigabyte with a change of thermal pads +100Mhs Eagle model? What do you mean.. changing thermal pads you are stable at about 100mhs? Title: Re: RTX 3080 hashrate drop list Post by: agente on November 08, 2020, 09:15:57 AM Who cares you can not buy them. And if they sell they may all have new parts. I am thinking lots of empty christmas stockings as we simply can not buy them. This list will be usefull when stocks come back slowly.. Title: Re: RTX 3080 hashrate drop list Post by: jgonzi on November 08, 2020, 09:23:53 AM Gigabyte with a change of thermal pads +100Mhs Link for those thermal pads please I put the thermalright of 12.8W/mk, 2mm. (Aliexpress) But other did it with Gelid 12W and other model of 8W, with same good result. All of us after that mod no more problem of throlling memory. We can see that's a problem when in the new FE they put new back thermals pads also too. The Eagle and Gaming and Vision are the same. The disipator is great con Cooper for the memory but the thermals pads are really bad making no good heat transfer. Title: Re: RTX 3080 hashrate drop list Post by: sakmsb on November 08, 2020, 11:27:17 AM Gigabyte with a change of thermal pads +100Mhs Link for those thermal pads please I put the thermalright of 12.8W/mk, 2mm. (Aliexpress) But other did it with Gelid 12W and other model of 8W, with same good result. All of us after that mod no more problem of throlling memory. We can see that's a problem when in the new FE they put new back thermals pads also too. The Eagle and Gaming and Vision are the same. The disipator is great con Cooper for the memory but the thermals pads are really bad making no good heat transfer. You are same one from here :D https://miningclub.info/threads/vse-problemy-rtx-3080.70379/post-1840603 Title: Re: RTX 3080 hashrate drop list Post by: aesma on November 08, 2020, 10:45:40 PM Needing to modify brand new, very expensive, difficult to obtain, cards so that they work properly, isn't great. And you void the warranty in the process.
Title: Re: RTX 3080 hashrate drop list Post by: badbart on November 08, 2020, 11:52:18 PM I have a EVGA and its been great, steady 96-97 mh/s with T-Rex miner on windows.
Title: Re: RTX 3080 hashrate drop list Post by: philipma1957 on November 09, 2020, 12:54:32 AM Who cares you can not buy them. And if they sell they may all have new parts. I am thinking lots of empty christmas stockings as we simply can not buy them. This list will be usefull when stocks come back slowly.. Not really as many will have redesigned cap patterns. So they could be far better then first model. You will need two lists. One for original cap patterns one for new cap pattern designs. at badbart I think I read the evga the mixed cap patterns which are superior. Title: Re: RTX 3080 hashrate drop list Post by: miner29 on November 09, 2020, 12:55:59 AM You can always tell the pioneers....by the arrows in their backs.
Title: Re: RTX 3080 hashrate drop list Post by: philipma1957 on November 09, 2020, 12:57:03 AM You can always tell the pioneers....by the arrows in their backs. nice one. anti-native but gets the point across. btw I was lucky I had three in my cart on different days and try as I might I could not pull the trigger fast enough. Title: Re: RTX 3080 hashrate drop list Post by: miner29 on November 09, 2020, 01:15:01 AM You can always tell the pioneers....by the arrows in their backs. nice one. anti-native but gets the point across. btw I was lucky I had three in my cart on different days and try as I might I could not pull the trigger fast enough. Being a native myself i dont see it as anti-native....more along the Dont Tread On Me type saying...that makes a perfect paroble of modern technology. An who hasnt as an enthusiast jumped in and gotten bitten so to speak. Wisdom comes right after you need it, if you are willing to listen. Title: Re: RTX 3080 hashrate drop list Post by: agente on November 09, 2020, 03:18:01 PM I have a EVGA and its been great, steady 96-97 mh/s with T-Rex miner on windows. FTW3 Gaming? Ultra gaming? XC3? Title: Re: RTX 3080 hashrate drop list Post by: reb0rn21 on November 09, 2020, 04:40:06 PM They need to learn and use direct cooler block contact to memory and VRM and ALL SOLVED!!!!!!!!!
No CRAPPY THERMAL PADS!!!!!!!!!! They all sell broken products Title: Re: RTX 3080 hashrate drop list Post by: aesma on November 09, 2020, 04:48:20 PM But then you need tighter manufacturing tolerances, if there is no contact something could burn... However 2mm thick pads is too much, they could do better and use 0,5mm ones, that would be much better already.
Title: Re: RTX 3080 hashrate drop list Post by: reb0rn21 on November 09, 2020, 04:53:01 PM No issue with tolerance if you put the screws at right place, but yeah 0.5mm would be a lot better
Title: Re: RTX 3080 hashrate drop list Post by: jgonzi on November 09, 2020, 04:58:28 PM But then you need tighter manufacturing tolerances, if there is no contact something could burn... However 2mm thick pads is too much, they could do better and use 0,5mm ones, that would be much better already. The original are 2mm... on the Gigabyte for the Mem... Title: Re: RTX 3080 hashrate drop list Post by: karta513165 on November 21, 2020, 02:18:44 AM But then you need tighter manufacturing tolerances, if there is no contact something could burn... However 2mm thick pads is too much, they could do better and use 0,5mm ones, that would be much better already. The original are 2mm... on the Gigabyte for the Mem... How did you change thermal pads? Just for the Memory or all pads. Should I add some pads on the backplate? I got same issue with hashrate drop. Thanks Title: Re: RTX 3080 hashrate drop list Post by: badbart on November 21, 2020, 02:44:19 AM I have an ASUS running on SMOS at a steady 94.82 mhs at 239 watts.
Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on November 21, 2020, 01:29:15 PM 3080 Asus TUF Gaming OC - EK Waterblock
1300 Mhz / 0.737V (Temp 34 degrees) RAM MH/s Watt 1MH/s = Watt + 0 = 87.3 206 2.36 250 = 90 210 2,33 500 = 92.5 214,5 2,31 750 = 95 217.5 2,28 1000= 97.4 220 2,26 Lowering the core more doesnt bring any benefit. All those shaders need power... Because of installation of EK Waterblock i have thinner pads. Its just unbelievable how hughe the old ones were. Title: Re: RTX 3080 hashrate drop list Post by: BitBlitzer on November 21, 2020, 03:32:02 PM Asus RTX 3080 TUF Gaming
No hashrate drops Best settings Core: 1350Mhz, 0.725V Memory: +1300Mhz Wattage: 219W (from software, will test draw from wall soon) 99.5 Mh/s in T-Rex miner. Title: Re: RTX 3080 hashrate drop list Post by: Metroid on November 21, 2020, 03:56:00 PM Asus RTX 3080 TUF Gaming No hashrate drops Best settings Core: 1350Mhz, 0.725V Memory: +1300Mhz Wattage: 219W (from software, will test draw from wall soon) 99.5 Mh/s in T-Rex miner. The asus has pretty good thermals although I believe 1300+ on memory is high, it works now, it might not work in few months, well as long you have 3 years warranty, you are covered. Title: Re: RTX 3080 hashrate drop list Post by: BitBlitzer on November 21, 2020, 04:46:40 PM Yeah, the thermals seem good on this card. The core only reaches 46C (fan @ 70%) but the backplate is hot to the touch. I would guess the memory reaches over 90C for sure.
But even at 70% fan the card is very quite so good mining card if you prioritize sound, you just need somewhere to dump all the heat. Title: Re: RTX 3080 hashrate drop list Post by: 666mrga999 on November 21, 2020, 07:05:00 PM I have RTX 3080 Palit, 101MH/s, 55C at 50% fan, 199,4W (54% power limit)
works like a charm, can provide proof Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on November 22, 2020, 10:47:47 AM Pls give some more infos about > 100 MH/s ETH.
I use Phoenix. T-Rex gives a little bit more hash, but has higher dev fee. So around the same. What is your RAM oc? I didnt test linux so far. My settings are for windows. Title: Re: RTX 3080 hashrate drop list Post by: sakmsb on November 22, 2020, 12:31:19 PM Pls give some more infos about > 100 MH/s ETH. Initially I used to get 101 MH/S on my Gigabyte Eagle OC with +1250 Mem and CCC(Custom Core Curve by locking the frequency at 1500 MHz) and 70 Power Limit on Phoenix Miner.I use Phoenix. T-Rex gives a little bit more hash, but has higher dev fee. So around the same. What is your RAM oc? I didnt test linux so far. My settings are for windows. But now Memory is throttling and I get max 75-90 depending upon ambiance temps. Title: Re: RTX 3080 hashrate drop list Post by: BitBlitzer on November 22, 2020, 12:38:13 PM I use Teamredminer for my AMD system and I'm testing T-Rex miner for this RTX 3080. The reason I'm not using Phoenix miner anymore is because it inflates hashrates by about 3%.
https://github.com/Kerney666/trm-ethash-miner-tester (https://github.com/Kerney666/trm-ethash-miner-tester) I have seen the same results when I'm mining. You can never hold your average hashrate poolside, it's off by about 3-5% in the long run with Phoenix. This means that 98Mh/s in teamredminer is actually more efficient than 100Mh/s in Phoenix miner. T-Rex seems to show true hashrates so far but I have to do more testing. Title: Re: RTX 3080 hashrate drop list Post by: jgonzi on November 22, 2020, 01:51:09 PM I use Teamredminer for my AMD system and I'm testing T-Rex miner for this RTX 3080. The reason I'm not using Phoenix miner anymore is because it inflates hashrates by about 3%. https://github.com/Kerney666/trm-ethash-miner-tester (https://github.com/Kerney666/trm-ethash-miner-tester) I have seen the same results when I'm mining. You can never hold your average hashrate poolside, it's off by about 3-5% in the long run with Phoenix. This means that 98Mh/s in teamredminer is actually more efficient than 100Mh/s in Phoenix miner. T-Rex seems to show true hashrates so far but I have to do more testing. If you want to have both in ones Nvidia and AMD, you should make a try to lolMiner. Really good hashrate in AMD and also quite interesting in Nvidia... and it doesn't inflate Hashrate Title: Re: RTX 3080 hashrate drop list Post by: jelome198959 on November 30, 2020, 05:02:10 PM So, any updates on this? From what I gather, it's like this.
Good ones that don't throttle: EVGA FTW3 MSI Gaming X, Suprim X (implied, if Gaming X does not throttle, Suprim X should not; can anyone confirm?) Asus Strix Palit GameRock Some throttle, some do not: Asus TUF https://www.reddit.com/r/EtherMining/comments/jxfoac/3080_thermal_throttling_thread/ (https://www.reddit.com/r/EtherMining/comments/jxfoac/3080_thermal_throttling_thread/) Zotac Trinity Palit Gaming Pro EVGA XC3 (https://www.reddit.com/r/EtherMining/comments/jxfoac/3080_thermal_throttling_thread/ge5pnoa/?utm_source=reddit&utm_medium=web2x&context=3 (https://www.reddit.com/r/EtherMining/comments/jxfoac/3080_thermal_throttling_thread/ge5pnoa/?utm_source=reddit&utm_medium=web2x&context=3)) Those that throttle: Gigabyte Gaming OC, Eagle OC, Vision OC (replacing thermal pads fixes issue) Nvidia Founder's Edition (replacing thermal pads fixes issue) MSI Ventus (need to keep under 60c - https://www.reddit.com/r/EtherMining/comments/jxfoac/3080_thermal_throttling_thread/gcycwa3/?utm_source=reddit&utm_medium=web2x&context=3 (https://www.reddit.com/r/EtherMining/comments/jxfoac/3080_thermal_throttling_thread/gcycwa3/?utm_source=reddit&utm_medium=web2x&context=3) For confirmation: Gigabyte Aorus Master; Aorus Extreme Colorful Zotac Holo! AMP Galax / KFA2 Please help us complete the list! Also let us know your ambient temps in your testings. I think it's safe to say that the card does not throttle if it can mine for at least 3 hours straight no problem. 12 hours no crashes is good; 24 hours is golden. Title: Re: RTX 3080 hashrate drop list Post by: 666mrga999 on November 30, 2020, 08:41:22 PM It would be useful to list all brands (please specify MODEL) with and without memory temp problems with eth hashrate drops: With drops: Founders Edition (?) Gigabyte EAGLE MSI (?) Without drops: EVGA Asus RTX 3080 TUF Gaming (user: BitBlitzer) Palit Gamerock (user: 666mrga999) I also acquired Gainward 3080 Phoenix and it drops after couple of hours, add it to drop list edit: i set up more agressive fan curve and now it seems stable at 95MHs. probably 3x 8pin power cards are best for mining, just better build quality i guess Title: Re: RTX 3080 hashrate drop list Post by: philipma1957 on November 30, 2020, 09:08:08 PM I have 2 evga
https://www.evga.com/products/product.aspx?pn=10G-P5-3885-KR EVGA GeForce RTX 3080 XC3 ULTRA GAMING, 10G-P5-3885-KR, 10GB GDDR6X, iCX3 Cooling, ARGB LED, Metal Backplate They run at 95mh each 190mh total since nov 18th Title: Re: RTX 3080 hashrate drop list Post by: Metroid on November 30, 2020, 09:29:36 PM I have 2 evga https://www.evga.com/products/product.aspx?pn=10G-P5-3885-KR EVGA GeForce RTX 3080 XC3 ULTRA GAMING, 10G-P5-3885-KR, 10GB GDDR6X, iCX3 Cooling, ARGB LED, Metal Backplate They run at 95mh each 190mh total since nov 18th 1 x 3080 = 95mhs, 250 watts? 3 x 570 = 90mhs, 360 watts At moment rx 570 sold around 160 usd? Title: Re: RTX 3080 hashrate drop list Post by: jelome198959 on December 01, 2020, 08:40:46 AM I just bought a 3080 Gaming X Looks like you have voltage control locked. Have you unlocked it on MSI Afterburner settings?I use MSI Afterburner to control core/mem/volt, but seem like this app can not handle this card well: - Can't monitor voltage: always display 0mv - If I add >150 to mem, the core immediately drop to 930mhz I use lastest driver (457.30). What should I do? I want to fix core/mem/volt at 1350/10000/725mv, are there an app that allow me to manual OC core/mem/volt? Now running stable at 1350/9250/725mv @ 87.4MH https://i0.wp.com/s1.uphinh.org/2020/12/01/Capture.png Title: Re: RTX 3080 hashrate drop list Post by: 666mrga999 on December 01, 2020, 10:01:20 AM Looks like you have voltage control locked. Have you unlocked it on MSI Afterburner settings? Yes. I also tried both 4 methods of voltage unlock option (ref design, standard MSI, extend MSI, third party).Help would be appretiated Title: Re: RTX 3080 hashrate drop list Post by: philipma1957 on December 01, 2020, 01:36:13 PM I have 2 evga https://www.evga.com/products/product.aspx?pn=10G-P5-3885-KR EVGA GeForce RTX 3080 XC3 ULTRA GAMING, 10G-P5-3885-KR, 10GB GDDR6X, iCX3 Cooling, ARGB LED, Metal Backplate They run at 95mh each 190mh total since nov 18th 1 x 3080 = 95mhs, 250 watts? 3 x 570 = 90mhs, 360 watts At moment rx 570 sold around 160 usd? 239 watts not 250 and I have a space issue. I have the power and the price but not the space. So 3080 is better. At the moment all amd 6800, 6800xt, 5700xt ,5600xt, nvidia 3070, 3080 ,3090. on amazon , newegg and provantage are sold out and only resellers have them. At newegg the rx 570 is available 8gb 200 usd this was a good card I had some https://www.newegg.com/sapphire-radeon-rx-570-11266-78-20g/p/N82E16814202384? 8gb 180 usd this was a shit card I had some https://www.newegg.com/msi-radeon-rx-570-rx-570-armor-8g-oc/p/N82E16814137256? here is the list https://www.newegg.com/p/pl?d=radeon+rx+570&N=8000%2050001312%2050001669%2050001561%2050001315%2050001314 So you are 180 to 220 a card Title: Re: RTX 3080 hashrate drop list Post by: agente on December 01, 2020, 06:03:03 PM So, any updates on this? From what I gather, it's like this. Good ones that don't throttle: EVGA FTW3 MSI Gaming X, Suprim X (implied, if Gaming X does not throttle, Suprim X should not; can anyone confirm?) Asus Strix Palit GameRock I will use your message in the first page. thanks Title: Re: RTX 3080 hashrate drop list Post by: Metroid on December 02, 2020, 08:29:04 PM Useful thread, helped me cancel my order for a Gigabyte Gaming OC 3080. if you pay msrp is not that bad. Title: Re: RTX 3080 hashrate drop list Post by: Metroid on December 02, 2020, 08:51:18 PM Hah, there's no MSRP anywhere :)) MSRP here = 1100 EUR. Yeah, there is no msrp if idiots/trolls or people with more money than sense always pay more for it. Who is winning here is resellers and scalpers because I'm sure nvidia sells to them much lower than the msrp they established which for 3080 is $699. Title: Re: RTX 3080 hashrate drop list Post by: philipma1957 on December 03, 2020, 01:58:16 PM third evga 3080 arrived ran it over night
here are screen shots. it is on an old z270 aorus board. using a shitty bronze psu link to evga. 769 oem price https://www.evga.com/products/product.aspx?pn=10G-P5-3885-KR I used a fan to add some cooling to the back plate. I will test without fan tomorrow https://i.imgur.com/dGP2AEE.jpg https://i.imgur.com/8ImymTb.jpg https://i.imgur.com/UATeyxI.png https://i.imgur.com/5vP6Q6D.png Title: Re: RTX 3080 hashrate drop list Post by: philipma1957 on December 03, 2020, 04:20:04 PM What about this :p http://ht1.uphinh.org/2020/12/03/IMG-3998.jpg http://https:/uphinh.org/2020/12/03/IMG-3996.jpg https://iwp.com/s1.uphinh.org/2020/12/03/Capture695cb91f357b9b50.png nice. what is the psu: gold, plat ,bronze? I have a lot of psu's laying around maybe I have the same as yours and can switch it in. good numbers 97mh is good nice way to have extra cooling for back plate Title: Re: RTX 3080 hashrate drop list Post by: Marvell2 on December 03, 2020, 05:16:01 PM I have 2 evga https://www.evga.com/products/product.aspx?pn=10G-P5-3885-KR EVGA GeForce RTX 3080 XC3 ULTRA GAMING, 10G-P5-3885-KR, 10GB GDDR6X, iCX3 Cooling, ARGB LED, Metal Backplate They run at 95mh each 190mh total since nov 18th 1 x 3080 = 95mhs, 250 watts? 3 x 570 = 90mhs, 360 watts At moment rx 570 sold around 160 usd? 239 watts not 250 and I have a space issue. I have the power and the price but not the space. So 3080 is better. At the moment all amd 6800, 6800xt, 5700xt ,5600xt, nvidia 3070, 3080 ,3090. on amazon , newegg and provantage are sold out and only resellers have them. At newegg the rx 570 is available 8gb 200 usd this was a good card I had some https://www.newegg.com/sapphire-radeon-rx-570-11266-78-20g/p/N82E16814202384? 8gb 180 usd this was a shit card I had some https://www.newegg.com/msi-radeon-rx-570-rx-570-armor-8g-oc/p/N82E16814137256? here is the list https://www.newegg.com/p/pl?d=radeon+rx+570&N=8000%2050001312%2050001669%2050001561%2050001315%2050001314 So you are 180 to 220 a card what the hell is going on its a month after release and still zero stock, i know covid and all but all this gear is made in asia which has pretty much beat covid Title: Re: RTX 3080 hashrate drop list Post by: Metroid on December 03, 2020, 09:20:26 PM third evga 3080 arrived ran it over night 281 watts the whole system, gpu only must be around 230 watts. Title: Re: RTX 3080 hashrate drop list Post by: Spill on December 03, 2020, 11:09:26 PM A manager at microcenter right down the block from me just told me i might be able to get a Zotac GeForce RTX 3090 Gaming Trinity Triple-Fan for 1519.00 if i can show up before 11am was wondering if zotac suffers from the slowdowns when they mine or keep waiting for asus's or EGVA's?
Title: Re: RTX 3080 hashrate drop list Post by: BitBlitzer on December 03, 2020, 11:37:18 PM You could buy it as an expensive toy but I wouldn't expect to make money off of it.
Once the 3080 Ti and 6900 XT become available nVidia will have to lower the price on the 3090s and even if they don't their resale value will drop buy 20-30% very quickly. Title: Re: RTX 3080 hashrate drop list Post by: geck on December 06, 2020, 06:44:58 PM zotac holo doesn't throttle in my gaming pc.
712mV -250core +775mem 91.8MH @ 230W atw (205W in phoenixminer) Title: Re: RTX 3080 hashrate drop list Post by: 666mrga999 on December 06, 2020, 07:54:30 PM zotac holo doesn't throttle in my gaming pc. 712mV -250core +775mem 91.8MH @ 230W atw (205W in phoenixminer) How long did you let it mining? Because Zotac has all poscaps and it should throtle. Title: Re: RTX 3080 hashrate drop list Post by: geck on December 06, 2020, 08:16:13 PM Close to 3 hours now.
It isn't the caps causing it, it is the memory temperature. If you look at gpu-z perfcap shows therm Title: Re: RTX 3080 hashrate drop list Post by: philipma1957 on December 07, 2020, 03:22:48 AM zotac holo doesn't throttle in my gaming pc. 712mV -250core +775mem 91.8MH @ 230W atw (205W in phoenixminer) How long did you let it mining? Because Zotac has all poscaps and it should throtle. We kicked around mixed caps vs 1 cap as throttle it is not but 1 cap does lock up cool units on high clocks. my mixed cap evga can go to + 1400 or +1500. and does not lock up or over heat. it has good cooling 3 fan and the mixed caps. see if you can clock higher and if it locks even if the memory is cool. Title: Re: RTX 3080 hashrate drop list Post by: geck on December 07, 2020, 11:09:28 AM zotac holo doesn't throttle in my gaming pc. 712mV -250core +775mem 91.8MH @ 230W atw (205W in phoenixminer) How long did you let it mining? Because Zotac has all poscaps and it should throtle. We kicked around mixed caps vs 1 cap as throttle it is not but 1 cap does lock up cool units on high clocks. my mixed cap evga can go to + 1400 or +1500. and does not lock up or over heat. it has good cooling 3 fan and the mixed caps. see if you can clock higher and if it locks even if the memory is cool. It might lock up on high core clocks, but i will not get to those clocks anyway since it is inside my desktop and i've built it to be silent so it does get pretty warm in there. Even so, gpu-z didn't show any thermal issues. On a side note, pretty happy with this card. Looks pretty and well engineered. I got this card: https://jisakuhibi.jp/review/zotac-gaming-geforce-rtx-3080-amp-holo (https://jisakuhibi.jp/review/zotac-gaming-geforce-rtx-3080-amp-holo) Review is in japanese but google translate does a good job and the review has a complete tear down. All that rgb is awesome inside my windowless case ;D Title: Re: RTX 3080 hashrate drop list Post by: 16Gb on December 13, 2020, 10:52:34 PM My rtx gamerock 3080, throttling if i use fan less 100% and then 700 overclock on memory.
It always uses 100% coolers (If autofan enabled) in eth mining (even without memory overclock) :( Title: Re: RTX 3080 hashrate drop list Post by: STSMiner on December 14, 2020, 01:03:48 AM So ..... here's some info for you guys that have a new RTX 30x0 card .... this is mostly for the RTX 3080 / 90 cards.
The test below was not carried out by me, but I have managed to confirm the findings with my RTX 3090 I have. The card used in this test -- MSI RTX 3090 Gaming. Picture 1 -- Two heat sensors are placed on the memory chips that are on the back of the card. Picture 2 -- This shows the card running in idle ..... nothing running, notice the temperature 33C Picture 3 -- This shows the card mining Dagger / Ethash, the monitor on the left shows the card mining, the temperature on the memory chips climb to over 76C, this is what causes the cards to throttle down, the 3080 cards also suffer with this issue with the memory chips on the other side of the card (heat sink / fan side). In order to get the most out of these cards, the memory chips and the VRM's need to be cooled down as much as possible. Make sure you have plenty of air flow around the card(s) and give them space to breath. https://media.discordapp.net/attachments/426505887188910082/787053508095639602/unknown.png?width=384&height=675 This is my RTX3090 ..... https://cdn.discordapp.com/attachments/573542115477553173/787178165796995072/unknown.png Title: Re: RTX 3080 hashrate drop list Post by: ol92 on December 14, 2020, 07:09:32 AM RTX 3090 FE: I had the card for a few weeks: throttle easily in ETH mining, no matter the setting, excepting heavy undervolt/underclock for the core and no overclock for the memory: 105Mh/s-110Mh/s @250-260W is doable. Works OK for Conflux, with carefull settings.
RTX 3080 TUF: No problem with ETH mining with core undervolt and memory overclock: core at 1150-1200@0.725mv and mem @ +1200 (10451) gives around 100Mh/s @ 210-215W. But, it needs appropriate case cooling (when I had both card in my case, the TUF was throttling from time to time). Overall, RTX 3090 is not appropriate for ETH mining (even without taking into consideration the price): the doubled memory chip on both side are difficult to cool and leads to an increased power usage. 3080 TUF has appropriate cooling on the mem chip and is OK for ETH mining. Title: Re: RTX 3080 hashrate drop list Post by: jgonzi on December 14, 2020, 07:32:50 AM My rtx gamerock 3080, throttling if i use fan less 100% and then 700 overclock on memory. It always uses 100% coolers (If autofan enabled) in eth mining (even without memory overclock) :( Memory Temp... lot 3080 have that problem. Better Thermal Pads Title: Re: RTX 3080 hashrate drop list Post by: 666mrga999 on December 14, 2020, 08:37:42 AM I have bought EVGA FTW3 and Palit Gaming Pro, neither of the throtthles.
Managed to get 220W EVGA@100MH/s and 210W Palit@100MH/s. Stable for 2 days now, no memory problems atm. Title: Re: RTX 3080 hashrate drop list Post by: 666mrga999 on December 14, 2020, 08:39:29 AM My rtx gamerock 3080, throttling if i use fan less 100% and then 700 overclock on memory. It always uses 100% coolers (If autofan enabled) in eth mining (even without memory overclock) :( I have 2 Gamerock cards, one does 104MHs stable other can do only 100MHs stable. I have fans set to 55% and power limited to 200W. Less power means less heat. Title: Re: RTX 3080 hashrate drop list Post by: jgonzi on December 14, 2020, 08:42:33 AM My rtx gamerock 3080, throttling if i use fan less 100% and then 700 overclock on memory. It always uses 100% coolers (If autofan enabled) in eth mining (even without memory overclock) :( I have 2 Gamerock cards, one does 104MHs stable other can do only 100MHs stable. I have fans set to 55% and power limited to 200W. Less power means less heat. Complete true, but some cards needs more power to arrive the MHs. Blocking the Fan is not the best option on the 3080, because you are not able to see the Memory Temp. You should leave it in auto. If you see the fan goes higher meanwhile the GPU is not hot... that means you have Memory Temp problems... But of course are your cards and your memory.... Title: Re: RTX 3080 hashrate drop list Post by: 16Gb on December 14, 2020, 10:12:33 AM I have 2 Gamerock cards, one does 104MHs stable other can do only 100MHs stable. How many days you mining with this cards?I have fans set to 55% and power limited to 200W. Less power means less heat. Title: Re: RTX 3080 hashrate drop list Post by: 666mrga999 on December 14, 2020, 10:35:37 AM I have 2 Gamerock cards, one does 104MHs stable other can do only 100MHs stable. How many days you mining with this cards?I have fans set to 55% and power limited to 200W. Less power means less heat. Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on December 22, 2020, 03:19:51 AM I just bought a 3080 Gaming X Looks like you have voltage control locked. Have you unlocked it on MSI Afterburner settings?I use MSI Afterburner to control core/mem/volt, but seem like this app can not handle this card well: - Can't monitor voltage: always display 0mv - If I add >150 to mem, the core immediately drop to 930mhz I use lastest driver (457.30). What should I do? I want to fix core/mem/volt at 1350/10000/725mv, are there an app that allow me to manual OC core/mem/volt? Now running stable at 1350/9250/725mv @ 87.4MH https://i0.wp.com/s1.uphinh.org/2020/12/01/Capture.png I have this same issue and been looking all over the interwebz with no chance to a fix . Anyone figured this out ? I checked with hwinfo and it seems to not be thermal throttling . Can’t unlock voltage control with msi afterburner even after enabling it its still not available . Title: Re: RTX 3080 hashrate drop list Post by: P00P135 on December 22, 2020, 05:17:05 AM You can't just use 60% Power Limit and expect it to work. Some brands require up to 70% to hit the magical hash to watt ratio. Also switch to linux its much easier.
Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on December 22, 2020, 01:55:41 PM You can't just use 60% Power Limit and expect it to work. Some brands require up to 70% to hit the magical hash to watt ratio. Also switch to linux its much easier. I’ve tried at 70-80-90-100% PL and same result all the time . Only time i see any effects from the PL is below 60% which makes the hashrate drop . Don’t know how to linux and this is ny gaming PC . Title: Re: RTX 3080 hashrate drop list Post by: STSMiner on December 22, 2020, 02:03:36 PM MSI AfterBurner 4.6.2 is too old, get the latest Beta for the RTX 30x0 cards.
``https://download-eu2.guru3d.com/afterburner/[Guru3D]-MSIAfterburnerSetup463Beta4Build15910.rar`` Source > https://forums.guru3d.com/threads/rtss-6-7-0-beta-1.412822/page-138#post-5855714 Also, see here https://bitcointalk.org/index.php?topic=5287329.msg55822914#msg55822914 These cards need to be kept cool to get the most out of them. Title: Re: RTX 3080 hashrate drop list Post by: Metroid on December 22, 2020, 02:46:38 PM These cards need to be kept cool to get the most out of them. Memory wise yes, core seems okay for most algos on intensive mining. Title: Re: RTX 3080 hashrate drop list Post by: bobben2 on December 22, 2020, 05:46:51 PM I have 2 Gamerock cards, one does 104MHs stable other can do only 100MHs stable. How many days you mining with this cards?I have fans set to 55% and power limited to 200W. Less power means less heat. Red Panda miner has a youtube vid on changing memory thermal pads on a brand new Gigabyte 3080 and that resolved the problem he had with the card throttling. Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on December 22, 2020, 07:05:27 PM MSI AfterBurner 4.6.2 is too old, get the latest Beta for the RTX 30x0 cards. ``https://download-eu2.guru3d.com/afterburner/[Guru3D]-MSIAfterburnerSetup463Beta4Build15910.rar`` Source > https://forums.guru3d.com/threads/rtss-6-7-0-beta-1.412822/page-138#post-5855714 Also, see here https://bitcointalk.org/index.php?topic=5287329.msg55822914#msg55822914 These cards need to be kept cool to get the most out of them. The gaming X doesnt seem to be suffering from thermal throttling cause it won’t even get enough power to get there . Also theres a butt load of thermal pads between the board and backplate . I got the msi afternurner and even with maxing out the core voltage the card refuses to go above 88mhs . Soon as the memory goes over +400 the base clock drops to 940 and so does the hashing . Right now when mining card is never above 45C Title: Re: RTX 3080 hashrate drop list Post by: STSMiner on December 22, 2020, 07:52:22 PM MSI AfterBurner 4.6.2 is too old, get the latest Beta for the RTX 30x0 cards. ``https://download-eu2.guru3d.com/afterburner/[Guru3D]-MSIAfterburnerSetup463Beta4Build15910.rar`` Source > https://forums.guru3d.com/threads/rtss-6-7-0-beta-1.412822/page-138#post-5855714 Also, see here https://bitcointalk.org/index.php?topic=5287329.msg55822914#msg55822914 These cards need to be kept cool to get the most out of them. The gaming X doesnt seem to be suffering from thermal throttling cause it won’t even get enough power to get there . Also theres a butt load of thermal pads between the board and backplate . I got the msi afternurner and even with maxing out the core voltage the card refuses to go above 88mhs . Soon as the memory goes over +400 the base clock drops to 940 and so does the hashing . Right now when mining card is never above 45C It's not the GPU core, it's the memory that's the issue, it's getting too hot. Need to feed the card cold air to cool those memory chips down, not the GPU core. The temp your seeing is for the GPU core at 45C, the memory will be in the 75C + range which is too hot, the card will throttle down based on this. This image was taken from EVGA's overclock util, the card used here (RTX 3080 from EVGA) for this has the 9 extra sensors for the memory and VRM's. See how hot the memory chips are above the GPU core and the lower right memory chip. This is the cause of the cards throttling down. https://cdn.discordapp.com/attachments/573542115477553173/789225215388942336/unknown.png Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on December 23, 2020, 02:10:03 AM The gaming X doesnt seem to be suffering from thermal throttling cause it won’t even get enough power to get there . Also theres a butt load of thermal pads between the board and backplate . I got the msi afternurner and even with maxing out the core voltage the card refuses to go above 88mhs . Soon as the memory goes over +400 the base clock drops to 940 and so does the hashing . Right now when mining card is never above 45C [/quote] It's not the GPU core, it's the memory that's the issue, it's getting too hot. Need to feed the card cold air to cool those memory chips down, not the GPU core. The temp your seeing is for the GPU core at 45C, the memory will be in the 75C + range which is too hot, the card will throttle down based on this. This image was taken from EVGA's overclock util, the card used here (RTX 3080 from EVGA) for this has the 9 extra sensors for the memory and VRM's. See how hot the memory chips are above the GPU core and the lower right memory chip. This is the cause of the cards throttling down. https://cdn.discordapp.com/attachments/573542115477553173/789225215388942336/unknown.png [/quote] In red panda’s video hwinfo shows temperature thermal limit :yes . When i run my card it shows no but power limit shows yes thats why i’m thinking its not a thermal issue ? Could it still be thermal throttling even tho hwinfo doesnt pick it up ? Today i added 4 of those corsair fans that blow 75 cfm . 3 as intake and 1 as exhaust + I added an old fan has exhaust outside my case right in front of both cards Still not going above 89-90 mhs . Red panda’s card had no thermal pads between the board and the backplate but the gaming X does so what tha hell am i suppose to do if its a thermal throttling issue . Add antminers fans lol ? Title: Re: RTX 3080 hashrate drop list Post by: philipma1957 on December 23, 2020, 02:51:21 AM Pull the back plate and fan the fuck out of it?
Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on December 23, 2020, 04:00:09 AM Pull the back plate and fan the fuck out of it? And void my warranty for 10mh ? Not very appealing . Right now i’m just pist i got the gaming trio cause prior to buying general consensus was that these cards were safe from issues . Should of went for an evga ftw3 or the asus tuf . I’ve always seen good results from evga’s when it comes to OC for mining . Title: Re: RTX 3080 hashrate drop list Post by: STSMiner on December 23, 2020, 06:56:39 AM @Seph213
Is the GPU connected to the motherboard inside a case or is the GPU out in the open on a riser ? Title: Re: RTX 3080 hashrate drop list Post by: jelome198959 on December 23, 2020, 11:43:11 AM Pull the back plate and fan the fuck out of it? And void my warranty for 10mh ? Not very appealing . Right now i’m just pist i got the gaming trio cause prior to buying general consensus was that these cards were safe from issues . Should of went for an evga ftw3 or the asus tuf . I’ve always seen good results from evga’s when it comes to OC for mining . So, to be clear: 1.) GPU-Z doesn't indicate it's thermal throttling. 2.) Setting the fan on auto --- what fan speeds do you get? 3.) Can't unlock voltage monitoring 4.) What MSI AB version are you running? 5.) Nvidia driver version? Title: Re: RTX 3080 hashrate drop list Post by: rdluffy on December 23, 2020, 12:22:37 PM The temp your seeing is for the GPU core at 45C, the memory will be in the 75C + range which is too hot, the card will throttle down based on this. I'm sorry if I'm being noob here, but as far as I know, don't these GDDR6s memories runs good and normally until 105c? I have a Gigabyte and MSI cards, 5700xt and 5700, both runs at 90c on memories, and it's very hard to reduce to less than 90c, but runs smooth and normal without any problem I already see on some websites about safe temps is below 105c and above 120c GDDR6X chips can suffer damage I'm waiting my EVGA 3080 black edition, and want to learn more about these new memories and GPUs Can you clarify for us? Thanks ;D Title: Re: RTX 3080 hashrate drop list Post by: Cryptomining2003 on December 23, 2020, 12:36:50 PM there´s already AB version 4.7.0 beta, try this one with newest driver to unlock all settings
Title: Re: RTX 3080 hashrate drop list Post by: Metroid on December 23, 2020, 12:38:16 PM I'm sorry if I'm being noob here, but as far as I know, don't these GDDR6s memories runs good and normally until 105c? 105c factory set clocks yes, 105c overclock or bios settings no, reason when it throttles it goes back to factory set clocks or very close to factory set clocks to contain the heat. You trolls need to understand that manufactures dont care about you complaining about throttling, they care when shit happens and you need to rma it to them. However the funny thing is that they dont want you to rma the gpu when shit happens but they dont care when they say you can overlock to hell with them hehe, deceptive marketing but they dont care about lying to you trolls too hehe, and if you help yourself to solve your problem then they say the warranty was void ehhe, perfect, which makes us think that they might do this intentional. Title: Re: RTX 3080 hashrate drop list Post by: STSMiner on December 23, 2020, 01:21:55 PM there´s already AB version 4.7.0 beta, try this one with newest driver to unlock all settings Got a link to that ? (Guru3d I hope) Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on December 23, 2020, 11:01:43 PM @Seph213 Is the GPU connected to the motherboard inside a case or is the GPU out in the open on a riser ? The 3080 is directly to the motherboard on the pcie 16x in my pc case. I got it for gaming but since 90% of the time my pc is idle i figured i’ll make it work for some eth . Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on December 23, 2020, 11:14:25 PM Pull the back plate and fan the fuck out of it? And void my warranty for 10mh ? Not very appealing . Right now i’m just pist i got the gaming trio cause prior to buying general consensus was that these cards were safe from issues . Should of went for an evga ftw3 or the asus tuf . I’ve always seen good results from evga’s when it comes to OC for mining . So, to be clear: 1.) GPU-Z doesn't indicate it's thermal throttling. 2.) Setting the fan on auto --- what fan speeds do you get? 3.) Can't unlock voltage monitoring 4.) What MSI AB version are you running? 5.) Nvidia driver version? 1.) i’m using hwinfo and its not showing me thermal temp limit reach. It does show me power limit reached tho. Not sure how to see thermal throttling with gpu-z . I’ll look at it if u show me where to check 2.) fan is set to auto. Temp is at 45-48c with fan usually being around 60-70% . Just added some 120mm magnetic corsair fan so inside the case is very cool. Oh and i have a fan outside my case right in front of the card to push out any hot air. 3-4.) i downloaded the MSI AB 4.6.3 beta and was able to have the core volt enable but even with that maxed out the card still throttles . 5.) nvidia driver 460.89 the latest . Title: Re: RTX 3080 hashrate drop list Post by: jelome198959 on December 24, 2020, 06:04:19 AM Pull the back plate and fan the fuck out of it? And void my warranty for 10mh ? Not very appealing . Right now i’m just pist i got the gaming trio cause prior to buying general consensus was that these cards were safe from issues . Should of went for an evga ftw3 or the asus tuf . I’ve always seen good results from evga’s when it comes to OC for mining . So, to be clear: 1.) GPU-Z doesn't indicate it's thermal throttling. 2.) Setting the fan on auto --- what fan speeds do you get? 3.) Can't unlock voltage monitoring 4.) What MSI AB version are you running? 5.) Nvidia driver version? 1.) i’m using hwinfo and its not showing me thermal temp limit reach. It does show me power limit reached tho. Not sure how to see thermal throttling with gpu-z . I’ll look at it if u show me where to check 2.) fan is set to auto. Temp is at 45-48c with fan usually being around 60-70% . Just added some 120mm magnetic corsair fan so inside the case is very cool. Oh and i have a fan outside my case right in front of the card to push out any hot air. 3-4.) i downloaded the MSI AB 4.6.3 beta and was able to have the core volt enable but even with that maxed out the card still throttles . 5.) nvidia driver 460.89 the latest . Title: Re: RTX 3080 hashrate drop list Post by: TheSkyTurk on December 25, 2020, 06:57:04 PM Gigabyte with a change of thermal pads +100Mhs Link for those thermal pads please I need it for Gigabyte Eagle OC. Acording to gigabyte.com, this GPU has Memory Clock 19000 MHz. I can push it to 10251 MHz without any problem. I want to push it higher. But i cannot get stable hahsrate. if i push it higher. if this GPU has Memory Clock 19000 MHz, we can push it higher than 10251 MHz. Core temp is very low because we dont need core to mine ETH in this GPU. We cannot see memory temp. This is the biggest problem. Even if i set the fan speed, memory temp is high. This GPU has a perfext cooler block and 3 fans are enough to cool the cooler block. But the termal pads for the memory are so bad. Because they cannot transfer the heat properly. I belive i can push memory highher than 10251 MHz and get 104 MH/s ETH mining hashrate if i use good termal pad. Title: Re: RTX 3080 hashrate drop list Post by: rdluffy on December 25, 2020, 10:50:17 PM Guys, just to add some info here
I bought this model: EVGA NVIDIA GeForce RTX 3080, 10GB, GDDR6X - 10G-P5-3881-KR This is the "basic" version, without backplate, and probably the cheapest of EVGA I'm running here for 24h, and using 67% TDP, +25 Core Clock + 1099 on memories and fan on 75% Using 228w on software and 250 or 260 on the wall Hashing 98Mhs without any drop and less than 1% of reject share I'll wait a little more to see what's the maximum I can get on this GPU and will post again Title: Re: RTX 3080 hashrate drop list Post by: Metroid on December 25, 2020, 10:57:58 PM Guys, just to add some info here I bought this model: EVGA NVIDIA GeForce RTX 3080, 10GB, GDDR6X - 10G-P5-3881-KR This is the "basic" version, without backplate, and probably the cheapest of EVGA I'm running here for 24h, and using 67% TDP, +25 Core Clock + 1099 on memories and fan on 75% Using 228w on software and 250 or 260 on the wall Hashing 98Mhs without any drop and less than 1% of reject share I'll wait a little more to see what's the maximum I can get on this GPU and will post again maybe minus 400 on core and 50% power limit? Title: Re: RTX 3080 hashrate drop list Post by: rdluffy on December 26, 2020, 12:35:50 AM maybe minus 400 on core and 50% power limit? Tried here, and hashrate drops to less than 70Mhs I think these 3080s are power hungry, and if I reduce TDP to 66%, hashrate drops too I can only achieve 98Mhs or more with more power If I reduce TDP, core clock can't sustain and this is the problem Example: TDP 67% and Core Clock 1020 to 1050Mhz = 98.4Mhs stable TDP 65% and core Clock 960 to 980Mhz = 91.8Mhs But I'm happy with, no drops and almost 100Mhs Title: Re: RTX 3080 hashrate drop list Post by: philipma1957 on December 26, 2020, 01:28:06 AM here is a video it is not click bait as I do not use any sponsors
this is a two card 3080 and 3060ti with extra 3080 cooling https://www.youtube.com/watch?v=ji4k3iJgIho 154mh and 400 watts maybe 405 watts Title: Re: RTX 3080 hashrate drop list Post by: STSMiner on December 26, 2020, 02:51:44 AM here is a video it is not click bait as I do not use any sponsors this is a two card 3080 and 3060ti with extra 3080 cooling https://www.youtube.com/watch?v=ji4k3iJgIho 154mh and 400 watts maybe 405 watts ;D Nice video ! *Updated my other post in the other thread* Title: Re: RTX 3080 hashrate drop list Post by: TheSkyTurk on December 26, 2020, 04:31:56 PM Zotac Trinity OC - Micron Memory
Throttling... I have 3 of them now. Each of them has diffrent hashrate although the weather is cold now. I will send them back Title: Re: RTX 3080 hashrate drop list Post by: rdbase on December 27, 2020, 03:19:05 AM Who cares you can not buy them. And if they sell they may all have new parts. I am thinking lots of empty christmas stockings as we simply can not buy them. All video cards including these ones mentioned at near impossible to get at retail stores as it seems scalpers have flooded them onto places like facebook marketplace and ebay.They are charging so much for the 3000series cards it really is not worth it to pay the prices they demand. Might as well wait until the pandemic protocol restrictions subside a bit so more can be delivered from their factories overseas to the big box stores like bestbuy and microcenters. Title: Re: RTX 3080 hashrate drop list Post by: SalvajeX on December 29, 2020, 12:21:37 AM here is a video it is not click bait as I do not use any sponsors this is a two card 3080 and 3060ti with extra 3080 cooling https://www.youtube.com/watch?v=ji4k3iJgIho 154mh and 400 watts maybe 405 watts I noticed he is using a single cable + extender to power the 3080. Is this safe and Ok? I’m running an evga 1300w that has only 6 GPU cables, i.e 3 cards. But it still has plenty of power that I cannot utilize. Title: Re: RTX 3080 hashrate drop list Post by: Metroid on December 29, 2020, 12:26:21 AM here is a video it is not click bait as I do not use any sponsors this is a two card 3080 and 3060ti with extra 3080 cooling https://www.youtube.com/watch?v=ji4k3iJgIho 154mh and 400 watts maybe 405 watts I noticed he is using a single cable + extender to power the 3080. Is this safe and Ok? I’m running an evga 1300w that has only 6 GPU cables, i.e 3 cards. But it still has plenty of power that I cannot utilize. If he knows what he is doing then is fine. Title: Re: RTX 3080 hashrate drop list Post by: jelome198959 on December 29, 2020, 10:42:16 AM Pull the back plate and fan the fuck out of it? And void my warranty for 10mh ? Not very appealing . Right now i’m just pist i got the gaming trio cause prior to buying general consensus was that these cards were safe from issues . Should of went for an evga ftw3 or the asus tuf . I’ve always seen good results from evga’s when it comes to OC for mining . So, to be clear: 1.) GPU-Z doesn't indicate it's thermal throttling. 2.) Setting the fan on auto --- what fan speeds do you get? 3.) Can't unlock voltage monitoring 4.) What MSI AB version are you running? 5.) Nvidia driver version? 1.) i’m using hwinfo and its not showing me thermal temp limit reach. It does show me power limit reached tho. Not sure how to see thermal throttling with gpu-z . I’ll look at it if u show me where to check 2.) fan is set to auto. Temp is at 45-48c with fan usually being around 60-70% . Just added some 120mm magnetic corsair fan so inside the case is very cool. Oh and i have a fan outside my case right in front of the card to push out any hot air. 3-4.) i downloaded the MSI AB 4.6.3 beta and was able to have the core volt enable but even with that maxed out the card still throttles . 5.) nvidia driver 460.89 the latest . Found the solution to your problem... https://www.reddit.com/r/EtherMining/comments/jabwcr/mining_on_the_3080_while_out_of_town_for_the/g9t4k5u/?utm_source=share&utm_medium=ios_app&utm_name=iossmf&context=3 Seems you need to update vbios of your Trio to bypass some kind of limitation by the current one. Let me know what you get now if you did flash it. GL! Title: Re: RTX 3080 hashrate drop list Post by: safar1980 on December 29, 2020, 03:29:33 PM https://www.youtube.com/watch?v=2no9uVSILXM
Replacement of thermal pads on gigabyte RTX 3080 video cards. After replacement, the video card produces a stable hashrate of ~ 100mh/s. But the warranty for the video card is no longer covered. Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on December 30, 2020, 03:14:28 AM Found the solution to your problem... https://www.reddit.com/r/EtherMining/comments/jabwcr/mining_on_the_3080_while_out_of_town_for_the/g9t4k5u/?utm_source=share&utm_medium=ios_app&utm_name=iossmf&context=3 Seems you need to update vbios of your Trio to bypass some kind of limitation by the current one. Let me know what you get now if you did flash it. GL! [/quote] Thanks for that find . They flashed the evga bios on the trio x but i would try the suprim bios to keep it in the family . At least to try at first . 2 things tho . 1: i heard u lose warranty when u flash the bios . Say i was to flash back to the original bios would msi still know i flashed a diff bios at some point ? 2: do u know of any good guide to flash the bios ? I had found one but it didnt work . I never flashed a gpu bios so its new territory for me . Title: Re: RTX 3080 hashrate drop list Post by: FP91G on December 30, 2020, 07:36:29 AM https://www.france24.news/en/2020/12/500000-graphics-cards-found-in-an-abandoned-container.html
500,000 graphics cards found in an abandoned container "The RTX 3070, 3080 and 3090 are still hard to find. A shortage favored by strong demand, excessively long production cycles and the global pandemic, which does not make things easier. Good news however, since a South Korean port operator has just got hold of a lost shipment of 500,000 GeForce RTX 3000 cards! A simple administrative error And indeed, there was one, or rather 500,000! We learned this Monday, December 28, 2020 that Choi Min-Sik, a port employee in South Korea, has unearthed a stray cargo of 500,000 GeForce RTX 3000 in a container. The employee in question had spotted boxes stamped Nvidia in a container absent from the registers." This is how the shortage of video cards is made. Title: Re: RTX 3080 hashrate drop list Post by: vx0713 on December 30, 2020, 08:40:12 AM https://www.france24.news/en/2020/12/500000-graphics-cards-found-in-an-abandoned-container.html 500,000 graphics cards found in an abandoned container First of all this is fake news, second what does it have to do with this topic? https://forums.guru3d.com/threads/no-500-000-rtx-3000-cards-were-not-found-in-south-korean-port.435959/ Title: Re: RTX 3080 hashrate drop list Post by: jelome198959 on December 30, 2020, 09:26:38 AM Thanks for that find . They flashed the evga bios on the trio x but i would try the suprim bios to keep it in the family . At least to try at first . 1.) I also don't know never did it before too but as long as you followed instructions perfectly I think you should be good. If I get a reasonably priced 3080 Trio I will try myself. But looking at market conditions, it is highly unlikely until maybe Feb. 2 things tho . 1: i heard u lose warranty when u flash the bios . Say i was to flash back to the original bios would msi still know i flashed a diff bios at some point ? 2: do u know of any good guide to flash the bios ? I had found one but it didnt work . I never flashed a gpu bios so its new territory for me . 2.) https://www.overclock.net/threads/official-nvidia-rtx-3080-owners-club.1753932/ There's a guide in the middle of the first post. GL! Title: Re: RTX 3080 hashrate drop list Post by: geck on December 30, 2020, 08:10:06 PM Pull the back plate and fan the fuck out of it? And void my warranty for 10mh ? Not very appealing . Right now i’m just pist i got the gaming trio cause prior to buying general consensus was that these cards were safe from issues . Should of went for an evga ftw3 or the asus tuf . I’ve always seen good results from evga’s when it comes to OC for mining . So, to be clear: 1.) GPU-Z doesn't indicate it's thermal throttling. 2.) Setting the fan on auto --- what fan speeds do you get? 3.) Can't unlock voltage monitoring 4.) What MSI AB version are you running? 5.) Nvidia driver version? 1.) i’m using hwinfo and its not showing me thermal temp limit reach. It does show me power limit reached tho. Not sure how to see thermal throttling with gpu-z . I’ll look at it if u show me where to check 2.) fan is set to auto. Temp is at 45-48c with fan usually being around 60-70% . Just added some 120mm magnetic corsair fan so inside the case is very cool. Oh and i have a fan outside my case right in front of the card to push out any hot air. 3-4.) i downloaded the MSI AB 4.6.3 beta and was able to have the core volt enable but even with that maxed out the card still throttles . 5.) nvidia driver 460.89 the latest . 1)In GPU-Z look for PerfCap Reason. It should say Idle when you are mining, and will change the Therm if it is thermal throttling. 3-4) do not raise core clock or core voltage, it just exacerbates the problem. If you use MSI AB you need to underclock and undervolt using voltage curve mode (I have mine flattened to 1000mhz, this will cause the gpu to run at its lowest voltage possible, thus lowering PL without reducing hashrate). Press ctrl+F when you are using MSI AB. Do not underclock by setting PL. Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on December 30, 2020, 09:11:00 PM @Geck
Do not underclock by setting PL. +1 In windows only use the Afterburner to set a fixed voltage. Lowest i could get is 0.737 or so. If anybody finds a solution to go lower..... post it. Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on December 30, 2020, 09:50:46 PM Pull the back plate and fan the fuck out of it? And void my warranty for 10mh ? Not very appealing . Right now i’m just pist i got the gaming trio cause prior to buying general consensus was that these cards were safe from issues . Should of went for an evga ftw3 or the asus tuf . I’ve always seen good results from evga’s when it comes to OC for mining . So, to be clear: 1.) GPU-Z doesn't indicate it's thermal throttling. 2.) Setting the fan on auto --- what fan speeds do you get? 3.) Can't unlock voltage monitoring 4.) What MSI AB version are you running? 5.) Nvidia driver version? 1.) i’m using hwinfo and its not showing me thermal temp limit reach. It does show me power limit reached tho. Not sure how to see thermal throttling with gpu-z . I’ll look at it if u show me where to check 2.) fan is set to auto. Temp is at 45-48c with fan usually being around 60-70% . Just added some 120mm magnetic corsair fan so inside the case is very cool. Oh and i have a fan outside my case right in front of the card to push out any hot air. 3-4.) i downloaded the MSI AB 4.6.3 beta and was able to have the core volt enable but even with that maxed out the card still throttles . 5.) nvidia driver 460.89 the latest . 1)In GPU-Z look for PerfCap Reason. It should say Idle when you are mining, and will change the Therm if it is thermal throttling. 3-4) do not raise core clock or core voltage, it just exacerbates the problem. If you use MSI AB you need to underclock and undervolt using voltage curve mode (I have mine flattened to 1000mhz, this will cause the gpu to run at its lowest voltage possible, thus lowering PL without reducing hashrate). Press ctrl+F when you are using MSI AB. Do not underclock by setting PL. In GPUZ Perfcap season is pwr while mining . I did notice that at 300mem or lower it says idle . Soon as i go above that it changes to pwr . I tried to set the curve at 1000mhz but everytime i apply , it goes automatically to 1300mhz . I tried 1100 but same thing . Title: Re: RTX 3080 hashrate drop list Post by: geck on December 30, 2020, 10:04:02 PM 1300mhz is fine, it should drop your core voltage all the way to 0.718V and drop your power consumption all the way down to 60-70%. Are you still getting PWR in perfcap with voltage at 0.718V?
Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on December 30, 2020, 11:05:45 PM 1300mhz is fine, it should drop your core voltage all the way to 0.718V and drop your power consumption all the way down to 60-70%. Are you still getting PWR in perfcap with voltage at 0.718V? Yup getting pwr soon as i OC above 250-300 mem . Title: Re: RTX 3080 hashrate drop list Post by: geck on December 31, 2020, 12:02:28 AM 1300mhz is fine, it should drop your core voltage all the way to 0.718V and drop your power consumption all the way down to 60-70%. Are you still getting PWR in perfcap with voltage at 0.718V? Yup getting pwr soon as i OC above 250-300 mem . thats really odd. does gpu-z display the breakdown of your power consumption e.g gpu chip and mvddc power draw? @Geck Do not underclock by setting PL. +1 In windows only use the Afterburner to set a fixed voltage. Lowest i could get is 0.737 or so. If anybody finds a solution to go lower..... post it. My zotac 3080 goes to 718mV, but i'm not sure if this is the case for all 3080 - my other rtx cards have different minimum voltages. FWIW i use awesomeminer to set the voltage. If it goes too low, the memory will drop to 5000mhz. Title: Re: RTX 3080 hashrate drop list Post by: percy_tc on January 02, 2021, 05:23:53 AM Does anyone has EVGA XC3 Black? As i see on evga forum, there is no backplate for this card.
Thanks in advance! Title: Re: RTX 3080 hashrate drop list Post by: vx0713 on January 02, 2021, 07:08:22 AM Does anyone has EVGA XC3 Black? As i see on evga forum, there is no backplate for this card. Thanks in advance! that's correct, that model doesn't have a backplate Title: Re: RTX 3080 hashrate drop list Post by: percy_tc on January 02, 2021, 07:37:48 PM I can confirm, ther is no backplate, BUT no trhottling on mine. 97Mh +1000 mem.
Title: Re: RTX 3080 hashrate drop list Post by: whoismoses on January 02, 2021, 09:57:15 PM I have...
5x EVGA 3080 FTW3 Ultra All get over 100 MH/s, 2 get 101. Power Limit: -39 to -42 Mem: +1260 to +1300 Watts: 240 to 260 watts at the wall 1x EVGA 3080 XC3 Ultra Power Limit: -30 Memory: +1300 Phoenix Miner Title: Re: RTX 3080 hashrate drop list Post by: Metroid on January 03, 2021, 01:29:34 AM I have... 5x EVGA 3080 FTW3 Ultra All get over 100 MH/s, 2 get 101. Power Limit: -39 to -42 Mem: +1260 to +1300 Watts: 240 to 260 watts at the wall 1x EVGA 3080 XC3 Ultra Power Limit: -30 Memory: +1300 Phoenix Miner It seems they are the best of the crop, I have not seen any with throttling issues. Title: Re: RTX 3080 hashrate drop list Post by: Grim on January 03, 2021, 05:37:14 AM So do different AIB's use different grade thermal pads?
So maybe those from EVGA are of higher quality ? Does anybody know? Title: Re: RTX 3080 hashrate drop list Post by: buraz11 on January 03, 2021, 07:45:11 AM I think its better heatsink solutions, i have a few 3060ti 3 asus 3 fan and 2 fan versions all do good, have 1 gigabyte and it looks feels and performs way worse on the cooling, also thinner heatsink
Title: Re: RTX 3080 hashrate drop list Post by: ZeeeN on January 03, 2021, 09:15:33 AM @Geck Do not underclock by setting PL. +1 In windows only use the Afterburner to set a fixed voltage. Lowest i could get is 0.737 or so. If anybody finds a solution to go lower..... post it. how to setting undervolt in msi afterburner? Title: Re: RTX 3080 hashrate drop list Post by: jgonzi on January 03, 2021, 09:58:07 AM @Geck Do not underclock by setting PL. +1 In windows only use the Afterburner to set a fixed voltage. Lowest i could get is 0.737 or so. If anybody finds a solution to go lower..... post it. how to setting undervolt in msi afterburner? You have to play with the Power Limit and with the Core... I'm able to mine with lolMiner 96Mhs with 213W... lowering that Mhs start to go down ... Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on January 03, 2021, 10:49:36 AM In Afterburner click on the triangle looking icon left of core clock.
This will open the curve editor. There click 1 of the points right side while pressing STRG to lower the right side (High Voltage) Click at 1 point while pressing SHIFT and move down the whole curve. When all points are lower than lets say 0.75V click at the most left point and raise it (as the highest point) to 0.75. Accept will raise all! points which have a shown lower voltage (right side) to the left point. Than you will have a line at 0.75V. Left side is the core clock. Avoid to set any point out of the shown area - this would crash the settings. When you managed to get all to 0.75V, just go down as much as you want. I have 1290 Core and 0.737V. Sorry about the terrible description - you can check it at youtube Dont use the Powerlimit! It will result in a changing core mhz. https://www.youtube.com/watch?v=A6kj5LoPhZQ Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on January 03, 2021, 06:04:24 PM Yes
Title: Re: RTX 3080 hashrate drop list Post by: jelome198959 on January 04, 2021, 03:43:34 PM My zotac 3080 goes to 718mV, but i'm not sure if this is the case for all 3080 - my other rtx cards have different minimum voltages. FWIW i use awesomeminer to set the voltage. If it goes too low, the memory will drop to 5000mhz. What hash are you getting now with your AMP HOLO? Can you share you OC settings? Fan speeds: Memory overclock: Power: Temp: Hashrate: Thanks! Title: Re: RTX 3080 hashrate drop list Post by: geck on January 04, 2021, 07:20:53 PM My zotac 3080 goes to 718mV, but i'm not sure if this is the case for all 3080 - my other rtx cards have different minimum voltages. FWIW i use awesomeminer to set the voltage. If it goes too low, the memory will drop to 5000mhz. What hash are you getting now with your AMP HOLO? Can you share you OC settings? Fan speeds: Memory overclock: Power: Temp: Hashrate: Thanks! It's in my main pc so i can't oc as far, but here are my settings fan speed: 60% mem oc: +550 voltage: 718mV (225W) temp: 58C hashrate: 93 Title: Re: RTX 3080 hashrate drop list Post by: ManuBBXX on January 04, 2021, 11:33:08 PM Reducing power limit also reduce voltage, so is it useful to manually undervolt with curve points ?
I do it on my 3060ti cause I OC the core too for gaming. But for eth mining, wich only memory freq matters, is there a need for manually undervolt ? My MSI 3060ti TrioX : PL 55%, fan 40%, core -502, mem +1400 : 63 mhs@130W Temp : 45 But I don't play with curve for the mining profile in AB, only for the gaming profile. Title: Re: RTX 3080 hashrate drop list Post by: jelome198959 on January 05, 2021, 01:20:52 AM My zotac 3080 goes to 718mV, but i'm not sure if this is the case for all 3080 - my other rtx cards have different minimum voltages. FWIW i use awesomeminer to set the voltage. If it goes too low, the memory will drop to 5000mhz. What hash are you getting now with your AMP HOLO? Can you share you OC settings? Fan speeds: Memory overclock: Power: Temp: Hashrate: Thanks! It's in my main pc so i can't oc as far, but here are my settings fan speed: 60% mem oc: +550 voltage: 718mV (225W) temp: 58C hashrate: 93 That looks like it's thermal throttling. Does HWINFO display "yes" on thermals? Can you please do +1000? Just to see if it's throttling or not? You'll see in a few minutes if it does, so won't be a hassle. Title: Re: RTX 3080 hashrate drop list Post by: geck on January 05, 2021, 02:24:28 PM My zotac 3080 goes to 718mV, but i'm not sure if this is the case for all 3080 - my other rtx cards have different minimum voltages. FWIW i use awesomeminer to set the voltage. If it goes too low, the memory will drop to 5000mhz. What hash are you getting now with your AMP HOLO? Can you share you OC settings? Fan speeds: Memory overclock: Power: Temp: Hashrate: Thanks! It's in my main pc so i can't oc as far, but here are my settings fan speed: 60% mem oc: +550 voltage: 718mV (225W) temp: 58C hashrate: 93 That looks like it's thermal throttling. Does HWINFO display "yes" on thermals? Can you please do +1000? Just to see if it's throttling or not? You'll see in a few minutes if it does, so won't be a hassle. it is not thermal throttling. It can't go higher as there is a monitor connected to it. Title: Re: RTX 3080 hashrate drop list Post by: Honeybadger34 on January 05, 2021, 10:57:37 PM Since the first post needs confirmation about Zotac AMP HOLO, I wanted to share my experience.
I've been running my first 3080 for about one and half day in my server case which has very good cooling (5 intake, 5 exhaust fans, all Arctic F12 PWM, running at full speed). OC settings: FAN 80%, PL 230W, CORE -200, Memory 2400. Ambient temperature around 20 C, Core Temp 56 C and that baby gives me 99,3 mh stable. I'll keep you guys updated if I get it throttled after a week or so just like ventus cards. Title: Re: RTX 3080 hashrate drop list Post by: natan069 on January 06, 2021, 03:32:52 AM Since the first post needs confirmation about Zotac AMP HOLO, I wanted to share my experience. I've been running my first 3080 for about one and half day in my server case which has very good cooling (5 intake, 5 exhaust fans, all Arctic F12 PWM, running at full speed). OC settings: FAN 80%, PL 230W, CORE -200, Memory 2400. Ambient temperature around 20 C, Core Temp 56 C and that baby gives me 99,3 mh stable. I'll keep you guys updated if I get it throttled after a week or so just like ventus cards. Memory 2400 is for Linux right? I´m in windows with similar settings but memory 1250 Palit one, don´t know wich, its a rebrand PCYES from Brazil. Runs ok. no drop in hash. aroud 100mh/s Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on January 06, 2021, 03:59:27 AM Since the first post needs confirmation about Zotac AMP HOLO, I wanted to share my experience. I've been running my first 3080 for about one and half day in my server case which has very good cooling (5 intake, 5 exhaust fans, all Arctic F12 PWM, running at full speed). OC settings: FAN 80%, PL 230W, CORE -200, Memory 2400. Ambient temperature around 20 C, Core Temp 56 C and that baby gives me 99,3 mh stable. I'll keep you guys updated if I get it throttled after a week or so just like ventus cards. Ventus cards throttle after days of being stable ? Title: Re: RTX 3080 hashrate drop list Post by: skirch on January 06, 2021, 06:20:30 AM Evga 3080 FTW3 Ultra, have only 4 cards now, awaiting some more this week.
On Linux all get between 99.5-101mh with -300 core,2400 memory and 220w power limit (power from the wall +10-15w extra per card), at room 25C cards run 55C @60% fan and no memory throttling. Cards are whisper quiet. Miner doesn't really matter at beginning trex was best, but after a day or two all tested (phoenix,gminer) reported same results. All cards bought around the 800eur mark, which for EU is just about MSRP. Title: Re: RTX 3080 hashrate drop list Post by: Honeybadger34 on January 06, 2021, 09:53:06 AM Since the first post needs confirmation about Zotac AMP HOLO, I wanted to share my experience. I've been running my first 3080 for about one and half day in my server case which has very good cooling (5 intake, 5 exhaust fans, all Arctic F12 PWM, running at full speed). OC settings: FAN 80%, PL 230W, CORE -200, Memory 2400. Ambient temperature around 20 C, Core Temp 56 C and that baby gives me 99,3 mh stable. I'll keep you guys updated if I get it throttled after a week or so just like ventus cards. Memory 2400 is for Linux right? I´m in windows with similar settings but memory 1250 Palit one, don´t know wich, its a rebrand PCYES from Brazil. Runs ok. no drop in hash. aroud 100mh/s Yeah Im on hiveos. So far so good, 99.35 super stable. However, Im not impressed with the cooling performance of this card as I have to get the fans spinning %75-80 to remain the temp around 56-57 C and the fans are not silent at all. Im gonna add my Palit Gamerock 3080 to the rig tonight, hopefully it will run colder :) Title: Re: RTX 3080 hashrate drop list Post by: Honeybadger34 on January 06, 2021, 10:00:53 AM Since the first post needs confirmation about Zotac AMP HOLO, I wanted to share my experience. I've been running my first 3080 for about one and half day in my server case which has very good cooling (5 intake, 5 exhaust fans, all Arctic F12 PWM, running at full speed). OC settings: FAN 80%, PL 230W, CORE -200, Memory 2400. Ambient temperature around 20 C, Core Temp 56 C and that baby gives me 99,3 mh stable. I'll keep you guys updated if I get it throttled after a week or so just like ventus cards. Ventus cards throttle after days of being stable ? I've read that from the discussion below. I'm afraid I will have to consider applying those sweet thermal pads from Grizzly one day. https://www.reddit.com/r/EtherMining/comments/jxfoac/3080_thermal_throttling_thread/ Title: Re: RTX 3080 hashrate drop list Post by: jelome198959 on January 06, 2021, 11:52:00 AM I don't understand something to be honest; I mine for a few days at 95-96 MH (confirmed by the average on the pool), then all of the sudden I look and find that it's mining at 85-90, again with the pool average confirming that my values have dropped. I take it you have a Ventus? What temps are you running it at?Strange thing is, I had GPU-Z open this whole time, there is no Temp throttling, the MSI Afterburner settings look good, so what gives? I only mine ETH. Also, what thickness did you guys use for the thermal pad on the memories? Is 1mm too much/little? Title: Re: RTX 3080 hashrate drop list Post by: skirch on January 07, 2021, 07:14:59 AM Got a real surprise yesterday from an Inno3D Geforce RTX 3080 iCHILL X3 :
101.75Mh - 1400 mem, 1275 core @ 725mv over 12h stable on the windows testing rig. https://i.imgur.com/tw1sGiF.png Title: Re: RTX 3080 hashrate drop list Post by: jelome198959 on January 07, 2021, 02:18:25 PM Since the first post needs confirmation about Zotac AMP HOLO, I wanted to share my experience. I've been running my first 3080 for about one and half day in my server case which has very good cooling (5 intake, 5 exhaust fans, all Arctic F12 PWM, running at full speed). OC settings: FAN 80%, PL 230W, CORE -200, Memory 2400. Ambient temperature around 20 C, Core Temp 56 C and that baby gives me 99,3 mh stable. I'll keep you guys updated if I get it throttled after a week or so just like ventus cards. Ventus cards throttle after days of being stable ? I've read that from the discussion below. I'm afraid I will have to consider applying those sweet thermal pads from Grizzly one day. https://www.reddit.com/r/EtherMining/comments/jxfoac/3080_thermal_throttling_thread/ Title: Re: RTX 3080 hashrate drop list Post by: Metroid on January 08, 2021, 03:38:33 AM I purchased some evga 3080 ftw3 to play with for 1000 usd each, 3 x 8 pin, already tested and each doing 100mhs, not bad, will test some games later. The whole graphics card is huge, much bigger than I thought it would be.
Power consumption in HWinfo64 says for rtx 3080 gpu 1 = 231 and rtx 3080 gpu 2 = 220, not bad, will see at the wall later on. Is there a way to attach pictures here or no? Title: Re: RTX 3080 hashrate drop list Post by: skirch on January 08, 2021, 07:54:59 AM What memory are you able to reach with them? Out of 4 FTW3 Ultras got one dud with bad memory, wont go over 1000mhz stable and 3 that would do 1300mhz. Also one died in a week, waiting for a replacement card. In the EVGA lineup only FTW3 Ultras are any good in terms of cooling, rest is a joke visually and weight wise.
Title: Re: RTX 3080 hashrate drop list Post by: Metroid on January 08, 2021, 07:58:11 AM What memory are you able to reach with them? Out of 4 FTW3 Ultras got one dud with bad memory, wont go over 1000mhz stable and 3 that would do 1300mhz. Also one died in a week, waiting for a replacement card. In the EVGA lineup only FTW3 Ultras are any good in terms of cooling, rest is a joke visually and weight wise. 1235 both, 100 mhs, going higher, hashrate increases but i'm happy with 100mhs, power limit 57, core 0, and fan speed 70. Yeah I would not buy the others ones. I just tested both here, both can do 1500mhz, it's the maximum, i can't go higher than this, at maximum 1500 both can do 102.76mhs. I returned both to 1235 and let it at 100mhs. The cooling might be good but the gddrx6 gets too hot, so better not to leave 24/7 at maximum 1500, even 1235mhz i have doubts for 24/7. I need to register both on the evga website, warranty is 3 years. bitcointalk needs to add video and image attachment. Title: Re: RTX 3080 hashrate drop list Post by: SalvajeX on January 08, 2021, 01:20:04 PM Folks, where did you get your EVGAs from?
I'm in EU, being registered on their site since end of Sept, early Oct for different models and nothing. Also nothing in stock in shops ;( Title: Re: RTX 3080 hashrate drop list Post by: skirch on January 08, 2021, 09:03:05 PM Not from EVGA for sure, looking actively on several platforms does provide good prices, but you need to be diligent :)
Yep 100-100.5mh is my sweet spot (-300 core ,2500/1250mhz mem, 220w, bumping power from 220-280 does not provide any more mh/s only heat), backplate even with a direct blowing cold air fan is like a furnace. That stupid design to extend the cooler and blow through it .... Need to redesign my card rigs, cards need at least 300mm apart if not more, otherwise is like Ultra Doom furnace on the end card :) . Snagged two EVGA 3060ti SC today, 460eur each, best price I have seen them in EU so far. Will start testing tomorrow. Title: Re: RTX 3080 hashrate drop list Post by: Metroid on January 08, 2021, 09:37:36 PM Not from EVGA for sure, looking actively on several platforms does provide good prices, but you need to be diligent :) Yep 100-100.5mh is my sweet spot (-300 core ,2500/1250mhz mem, 220w, bumping power from 220-280 does not provide any more mh/s only heat), backplate even with a direct blowing cold air fan is like a furnace. That stupid design to extend the cooler and blow through it .... Need to redesign my card rigs, cards need at least 300mm apart if not more, otherwise is like Ultra Doom furnace on the end card :) . Snagged two EVGA 3060ti SC today, 460eur each, best price I have seen them in EU so far. Will start testing tomorrow. Tell me, why -300 core? if you will lower the power limit anyway, I mean, there is a certain amount of core speed needed to keep 100mhs, in my case here is between 1450 to 1550mhz, so keeping the core as default = 0 and then working your way with the power limit is all you need. Yeah, even at 230w this evga 3080 gtw3 gets very hot and that is from ambient room temperature of 24 degrees celsius with air conditioner. I would not try this gpus, i mean rtx 3080 in a non controlled air conditioner ambient, memory will throttle for sure, I mean even at 24 degrees Celsius if the fan is less than 70, hashrate drops little by little as the memory gets hotter and core also gets lower little by little. That 3060ti you got which version is that? Title: Re: RTX 3080 hashrate drop list Post by: skirch on January 08, 2021, 09:48:56 PM EVGA GeForce RTX 3060 Ti XC
It does bring temps down a bit, no real reason to use 0 to + core as it only brings temps up and nothing more, up to -300 I don't see any downside on mh/s. I use hive os if it matters. Title: Re: RTX 3080 hashrate drop list Post by: Metroid on January 08, 2021, 11:13:17 PM EVGA GeForce RTX 3060 Ti XC It does bring temps down a bit, no real reason to use 0 to + core as it only brings temps up and nothing more, up to -300 I don't see any downside on mh/s. I use hive os if it matters. linux x windows again, i saw no benefits on windows clocking lower, temperature is the same because power limit is the same, if i lower the power limit clock drops however one of the cards it helped 1 power limit less from 61 to 60 and minus 100 clock speed but I think it helped because lowering 1 power limit more would be worse than core clock, so lets say if there was 0.5 power limit then i would find the perfect spot as we don't, manipulating clock speed helps to find that perfect spot if the power limit is not in the perfect spot, reason i said it helped one gpu the other no, there was one gpu at the perfect power limit, interesting. Same hashrate = 100 mhs constant, no drops. By the way the rtx 3080 evga ftw3 has memory sensors, so you can check the temperature, at moment is. GPU 1 Code: Date , GPU Clock [MHz] , Memory Clock [MHz] , GPU Temperature [°C] , Fan 1 Speed (%) [%] , Fan 1 Speed (RPM) [RPM] , Fan 2 Speed (%) [%] , Fan 2 Speed (RPM) [RPM] , Memory Used [MB] , GPU Load [%] , Memory Controller Load [%] , Video Engine Load [%] , Bus Interface Load [%] , Board Power Draw [W] , GPU Chip Power Draw [W] , MVDDC Power Draw [W] , PWR_SRC Power Draw [W] , PWR_SRC Voltage [V] , PCIe Slot Power [W] , PCIe Slot Voltage [V] , 8-Pin #1 Power [W] , 8-Pin #1 Voltage [V] , 8-Pin #2 Power [W] , 8-Pin #2 Voltage [V] , 8-Pin #3 Power [W] , 8-Pin #3 Voltage [V] , Power Consumption (%) [% TDP] , PerfCap Reason [] , GPU Voltage [V] , EVGA iCX GPU2 [°C] , EVGA iCX MEM1 [°C] , EVGA iCX MEM2 [°C] , EVGA iCX MEM3 [°C] , EVGA iCX PWR1 [°C] , EVGA iCX PWR2 [°C] , EVGA iCX PWR3 [°C] , EVGA iCX PWR4 [°C] , EVGA iCX PWR5 [°C] , EVGA iCX Right Fan [RPM] , CPU Temperature [°C] , System Memory Used [MB] , GPU 2 Code: Date , GPU Clock [MHz] , Memory Clock [MHz] , GPU Temperature [°C] , Fan 1 Speed (%) [%] , Fan 1 Speed (RPM) [RPM] , Fan 2 Speed (%) [%] , Fan 2 Speed (RPM) [RPM] , Memory Used [MB] , GPU Load [%] , Memory Controller Load [%] , Video Engine Load [%] , Bus Interface Load [%] , Board Power Draw [W] , GPU Chip Power Draw [W] , MVDDC Power Draw [W] , PWR_SRC Power Draw [W] , PWR_SRC Voltage [V] , PCIe Slot Power [W] , PCIe Slot Voltage [V] , 8-Pin #1 Power [W] , 8-Pin #1 Voltage [V] , 8-Pin #2 Power [W] , 8-Pin #2 Voltage [V] , 8-Pin #3 Power [W] , 8-Pin #3 Voltage [V] , Power Consumption (%) [% TDP] , PerfCap Reason [] , GPU Voltage [V] , EVGA iCX GPU2 [°C] , EVGA iCX MEM1 [°C] , EVGA iCX MEM2 [°C] , EVGA iCX MEM3 [°C] , EVGA iCX PWR1 [°C] , EVGA iCX PWR2 [°C] , EVGA iCX PWR3 [°C] , EVGA iCX PWR4 [°C] , EVGA iCX PWR5 [°C] , EVGA iCX Right Fan [RPM] , CPU Temperature [°C] , System Memory Used [MB] , Incredible gddrx6 temperature, no more than 68c. Top of the line, worth it, the only issue is 3 x 8 pin power, 2 x 8 pin would have been just fine. Title: Re: RTX 3080 hashrate drop list Post by: geck on January 09, 2021, 01:26:40 PM EVGA GeForce RTX 3060 Ti XC It does bring temps down a bit, no real reason to use 0 to + core as it only brings temps up and nothing more, up to -300 I don't see any downside on mh/s. I use hive os if it matters. linux x windows again, i saw no benefits on windows clocking lower, temperature is the same because power limit is the same, if i lower the power limit clock drops however one of the cards it helped 1 power limit less from 61 to 60 and minus 100 clock speed but I think it helped because lowering 1 power limit more would be worse than core clock, so lets say if there was 0.5 power limit then i would find the perfect spot as we don't, manipulating clock speed helps to find that perfect spot if the power limit is not in the perfect spot, reason i said it helped one gpu the other no, there was one gpu at the perfect power limit, interesting. Same hashrate = 100 mhs constant, no drops. By the way the rtx 3080 evga ftw3 has memory sensors, so you can check the temperature, at moment is. GPU 1 Code: Date , GPU Clock [MHz] , Memory Clock [MHz] , GPU Temperature [°C] , Fan 1 Speed (%) [%] , Fan 1 Speed (RPM) [RPM] , Fan 2 Speed (%) [%] , Fan 2 Speed (RPM) [RPM] , Memory Used [MB] , GPU Load [%] , Memory Controller Load [%] , Video Engine Load [%] , Bus Interface Load [%] , Board Power Draw [W] , GPU Chip Power Draw [W] , MVDDC Power Draw [W] , PWR_SRC Power Draw [W] , PWR_SRC Voltage [V] , PCIe Slot Power [W] , PCIe Slot Voltage [V] , 8-Pin #1 Power [W] , 8-Pin #1 Voltage [V] , 8-Pin #2 Power [W] , 8-Pin #2 Voltage [V] , 8-Pin #3 Power [W] , 8-Pin #3 Voltage [V] , Power Consumption (%) [% TDP] , PerfCap Reason [] , GPU Voltage [V] , EVGA iCX GPU2 [°C] , EVGA iCX MEM1 [°C] , EVGA iCX MEM2 [°C] , EVGA iCX MEM3 [°C] , EVGA iCX PWR1 [°C] , EVGA iCX PWR2 [°C] , EVGA iCX PWR3 [°C] , EVGA iCX PWR4 [°C] , EVGA iCX PWR5 [°C] , EVGA iCX Right Fan [RPM] , CPU Temperature [°C] , System Memory Used [MB] , GPU 2 Code: Date , GPU Clock [MHz] , Memory Clock [MHz] , GPU Temperature [°C] , Fan 1 Speed (%) [%] , Fan 1 Speed (RPM) [RPM] , Fan 2 Speed (%) [%] , Fan 2 Speed (RPM) [RPM] , Memory Used [MB] , GPU Load [%] , Memory Controller Load [%] , Video Engine Load [%] , Bus Interface Load [%] , Board Power Draw [W] , GPU Chip Power Draw [W] , MVDDC Power Draw [W] , PWR_SRC Power Draw [W] , PWR_SRC Voltage [V] , PCIe Slot Power [W] , PCIe Slot Voltage [V] , 8-Pin #1 Power [W] , 8-Pin #1 Voltage [V] , 8-Pin #2 Power [W] , 8-Pin #2 Voltage [V] , 8-Pin #3 Power [W] , 8-Pin #3 Voltage [V] , Power Consumption (%) [% TDP] , PerfCap Reason [] , GPU Voltage [V] , EVGA iCX GPU2 [°C] , EVGA iCX MEM1 [°C] , EVGA iCX MEM2 [°C] , EVGA iCX MEM3 [°C] , EVGA iCX PWR1 [°C] , EVGA iCX PWR2 [°C] , EVGA iCX PWR3 [°C] , EVGA iCX PWR4 [°C] , EVGA iCX PWR5 [°C] , EVGA iCX Right Fan [RPM] , CPU Temperature [°C] , System Memory Used [MB] , Incredible gddrx6 temperature, no more than 68c. Top of the line, worth it, the only issue is 3 x 8 pin power, 2 x 8 pin would have been just fine. aren't the icx temperatures from external probes, rather than the internal temperature of the memory? Title: Re: RTX 3080 hashrate drop list Post by: Metroid on January 09, 2021, 02:00:15 PM aren't the icx temperatures from external probes, rather than the internal temperature of the memory? That is the only explanation, only the ftw3 series 3080 have sensors as far as i know and that is a good thing, seeing the temperature helps me to push it higher, well the memory is already at 1235mhz and I already tried 1500mhz and it gives 103mhs and it worked without a problem, will leave at 1235mhz, 100mhs is good already. Title: Re: RTX 3080 hashrate drop list Post by: ZeeeN on January 09, 2021, 05:40:45 PM EVGA GeForce RTX 3060 Ti XC It does bring temps down a bit, no real reason to use 0 to + core as it only brings temps up and nothing more, up to -300 I don't see any downside on mh/s. I use hive os if it matters. i use 3070 with -300 core i not see any different in MH or temp compare with core 0 Title: Re: RTX 3080 hashrate drop list Post by: skirch on January 09, 2021, 07:10:26 PM ICX temperatures are indeed from external probes. And are far off from real memory temps :). If they put real temps people will run screaming hahahah. Next week will try to vandalise the best card so far, with pads and glued radiators to the back plate.
Title: Re: RTX 3080 hashrate drop list Post by: ogoman on January 09, 2021, 10:31:28 PM I got the Gigabyte AORUS GeForce RTX 3080 Master and it's working like a beast 97.5 MH 24/7 240w
Title: Re: RTX 3080 hashrate drop list Post by: Xazax310 on January 09, 2021, 10:48:13 PM Stay away from MSI Gaming Trio X's for such a beefy card(it very long) it doesn't perform as similar 3080's. 92mh/s is the best I can get and it seems to suffer from a bug that only allows 200w to card (in HiveOS). There are "fixes" such as flashing the BIOs to SuprimX one, but I would avoid buying any of these cards for mining. Seeing as EVGA FTW3 3080, as other have gotten, do 100mh/s+ easy. I've gotten mine to 107mh/s have to see about stability for that high but I keep it around 103mh/s
TLDR: Stay away from MSI brand 3080's Title: Re: RTX 3080 hashrate drop list Post by: Metroid on January 09, 2021, 11:27:33 PM Stay away from MSI Gaming Trio X's for such a beefy card(it very long) it doesn't perform as similar 3080's. 92mh/s is the best I can get and it seems to suffer from a bug that only allows 200w to card (in HiveOS). There are "fixes" such as flashing the BIOs to SuprimX one, but I would avoid buying any of these cards for mining. Seeing as EVGA FTW3 3080, as other have gotten, do 100mh/s+ easy. I've gotten mine to 107mh/s have to see about stability for that high but I keep it around 103mh/s TLDR: Stay away from MSI brand 3080's 107mhs, EVGA FTW3 3080? memory speed? i mean if i go to 1500mhs, it gives me 103. Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on January 09, 2021, 11:50:19 PM Stay away from MSI Gaming Trio X's for such a beefy card(it very long) it doesn't perform as similar 3080's. 92mh/s is the best I can get and it seems to suffer from a bug that only allows 200w to card (in HiveOS). There are "fixes" such as flashing the BIOs to SuprimX one, but I would avoid buying any of these cards for mining. Seeing as EVGA FTW3 3080, as other have gotten, do 100mh/s+ easy. I've gotten mine to 107mh/s have to see about stability for that high but I keep it around 103mh/s TLDR: Stay away from MSI brand 3080's If MSI would release a bios to unlock the power limit it would be a great card . I have it running at 100mh @ 220W (suprim bios) for over a week now 24/7 . Temps are at 46-48c with fan between 70-85% . PL is at 108 so i can probably push it to 105-107 ? Didnt feel like trying lol . Title: Re: RTX 3080 hashrate drop list Post by: ogoman on January 10, 2021, 10:50:12 AM I got the Gigabyte AORUS GeForce RTX 3080 Master and it's working like a beast 97.5 MH 24/7 240w Now I got it to 99.6 MH 240w Title: Re: RTX 3080 hashrate drop list Post by: ShinyGG on January 10, 2021, 01:42:39 PM MSI AfterBurner 4.6.2 is too old, get the latest Beta for the RTX 30x0 cards. ``https://download-eu2.guru3d.com/afterburner/[Guru3D]-MSIAfterburnerSetup463Beta4Build15910.rar`` Source > https://forums.guru3d.com/threads/rtss-6-7-0-beta-1.412822/page-138#post-5855714 Also, see here https://bitcointalk.org/index.php?topic=5287329.msg55822914#msg55822914 These cards need to be kept cool to get the most out of them. The gaming X doesnt seem to be suffering from thermal throttling cause it won’t even get enough power to get there . Also theres a butt load of thermal pads between the board and backplate . I got the msi afternurner and even with maxing out the core voltage the card refuses to go above 88mhs . Soon as the memory goes over +400 the base clock drops to 940 and so does the hashing . Right now when mining card is never above 45C It's not the GPU core, it's the memory that's the issue, it's getting too hot. Need to feed the card cold air to cool those memory chips down, not the GPU core. The temp your seeing is for the GPU core at 45C, the memory will be in the 75C + range which is too hot, the card will throttle down based on this. This image was taken from EVGA's overclock util, the card used here (RTX 3080 from EVGA) for this has the 9 extra sensors for the memory and VRM's. See how hot the memory chips are above the GPU core and the lower right memory chip. This is the cause of the cards throttling down. https://cdn.discordapp.com/attachments/573542115477553173/789225215388942336/unknown.png Could you please tell me which model EVGA you have? I've tried the X1 software from EVGA and mine isn't showing VRAM temps. Title: Re: RTX 3080 hashrate drop list Post by: ShinyGG on January 10, 2021, 05:50:15 PM I would like to add the following information to help with the thread:
MSI Suprim X does not throttle. Varying 97-104mh/s with +1200 memory -400 clock, 70% power, 70% fans. EVGA XC3 Ultra Gaming - Does not throttle. Same settings as MSI above. Will be testing the following over the coming days: MSI Gaming Trio Palit GameRock, 3 units (on this thread it was mentioned it doesn't throttle, so fingers crossed) MSI Suprim X (the 2nd one so will be able to validate with confidence) Title: Re: RTX 3080 hashrate drop list Post by: Xazax310 on January 10, 2021, 06:34:42 PM Stay away from MSI Gaming Trio X's for such a beefy card(it very long) it doesn't perform as similar 3080's. 92mh/s is the best I can get and it seems to suffer from a bug that only allows 200w to card (in HiveOS). There are "fixes" such as flashing the BIOs to SuprimX one, but I would avoid buying any of these cards for mining. Seeing as EVGA FTW3 3080, as other have gotten, do 100mh/s+ easy. I've gotten mine to 107mh/s have to see about stability for that high but I keep it around 103mh/s 107mhs, EVGA FTW3 3080? memory speed? i mean if i go to 1500mhs, it gives me 103.TLDR: Stay away from MSI brand 3080's https://imgur.com/a/fiOzhIo With the 3080's it relies upon temperature, I've gotten it to 107mh/s when it was around 45C. Right now it hashes around 105mh/s at 53C. Just got another MSI Trio X in. Does even worse, about 89mh/s. Tried flashing various EVGA BIOs 400w to 450w with no success. Looks like have to use Windows strictly on the MSI Trios to get a good hashrate out of them. Title: Re: RTX 3080 hashrate drop list Post by: legcramp on January 11, 2021, 05:14:44 AM For those of you that own the MSI 3080 Gaming X Trio, does one of the four screws mounting the GPU have that warranty void if removed sticker on it?
If you're seeing low results it should be a simple matter of flashing to the surprim bios and possibly replacing the 1mm thermal pads for the memory on the backplate to get that 100MH/s. Title: Re: RTX 3080 hashrate drop list Post by: Metroid on January 11, 2021, 05:17:47 AM https://imgur.com/a/fiOzhIo With the 3080's it relies upon temperature, I've gotten it to 107mh/s when it was around 45C. Right now it hashes around 105mh/s at 53C. Just got another MSI Trio X in. Does even worse, about 89mh/s. Tried flashing various EVGA BIOs 400w to 450w with no success. Looks like have to use Windows strictly on the MSI Trios to get a good hashrate out of them. Mine is about that core temperature as well, memory temperature is around 70 degrees Celsius, your memory is at 3400mhz, that is insane. Good to know which gpus i have to avoid if i decide to buy more, thanks. Title: Re: RTX 3080 hashrate drop list Post by: Cango on January 11, 2021, 12:21:06 PM Title: Re: RTX 3080 hashrate drop list Post by: leojoyms on January 11, 2021, 03:06:56 PM consuming how much?
Title: Re: RTX 3080 hashrate drop list Post by: Metroid on January 11, 2021, 04:01:45 PM memory too high could be a problem after 24/7 mining for months, lower a bit and leave at 100mhs i what i recommend it. Title: Re: RTX 3080 hashrate drop list Post by: skirch on January 11, 2021, 04:03:19 PM No way to get those numbers with that memory clock, just no way. I have several FTW3 and all show similar hashrates, for 101-2mh you need over 1250-1350mhz memory.
ps. I keep my cards bellow 50c, 45-48c avrg Title: Re: RTX 3080 hashrate drop list Post by: Metroid on January 11, 2021, 05:14:13 PM No way to get those numbers with that memory clock, just no way. I have several FTW3 and all show similar hashrates, for 101-2mh you need over 1250-1350mhz memory. ps. I keep my cards bellow 50c, 45-48c avrg yeah that is strange and dangerous, 3400mhz, insane. Title: Re: RTX 3080 hashrate drop list Post by: skirch on January 11, 2021, 06:04:43 PM Maybe my first FTW3 went bye bye, because I was pushing clocks really aggressively without proper cooling. RMA was told might take over 1-2m :(
ps.Not sure how is the US availability, but all my orders for 3060ti and 3080s were canceled for this week, and no arrival date given in the near month or so :( Title: Re: RTX 3080 hashrate drop list Post by: DejavuUS on January 11, 2021, 07:28:42 PM Very helpful thread. Hope to have a 3080 Palit Gamerock soon, will update once I have.
Title: Re: RTX 3080 hashrate drop list Post by: ildotoress on January 12, 2021, 03:38:32 PM I've been playing with my MSI 3080Gaming X Trio for the days.
It can't do more than 86MH/s, no matter the temperature. Issue is in the BIOS as when power reaches 205W it throttles. I am using MSI Curve with minimum allowable voltage, 0.725 (in reality 0.731), and 1125MHz. If I use normal PL level it does not do more than 82MH/s. Also it must have a minus 120MHz on the memory, if I give it more it throttles instantly to 60-70MH/s. Stay away from the Gaming X for minig! PS. Yes, you loose warranty if: you change BIOS with any BIOS not destined for Gaming X (exception the 2 official ones= OC mode and silent mode - tested both, same 205W throttle limit), or if you remove the seal on the 4th GPU screw. Title: Re: RTX 3080 hashrate drop list Post by: Hackintoshihope on January 13, 2021, 07:31:45 PM EVGA XC3 ULTRA GAMING, getting 102 MH/s when not using the monitor, no throttling. Fans at 60%, +1500 memory, -200 GPU, 70 PL @ ~240W. Had a Gigabyte Gaming OC before; was thermal throttling with PL 60, was pulling between 85-91 MH/s. Glad to be rid of it. I tall depends on the backplate and location of thermal pads, if they are good the memory will not throttle! Title: Re: RTX 3080 hashrate drop list Post by: jgonzi on January 13, 2021, 07:38:11 PM EVGA XC3 ULTRA GAMING, getting 102 MH/s when not using the monitor, no throttling. Fans at 60%, +1500 memory, -200 GPU, 70 PL @ ~240W. Had a Gigabyte Gaming OC before; was thermal throttling with PL 60, was pulling between 85-91 MH/s. Glad to be rid of it. I tall depends on the backplate and location of thermal pads, if they are good the memory will not throttle! I can get with lolMiner 100Mhs with less that 240W in my Gigabyte ... But I made the Thermal Pads not only in back plate also I replace the original and I take out the large connector to give some extra ventilation... and it works greats... Now I have at 96Mhs at 217W... I prefer to save that 20W for 4 Mhs... Title: Re: RTX 3080 hashrate drop list Post by: rdluffy on January 13, 2021, 07:41:20 PM I've been playing with my MSI 3080Gaming X Trio for the days. It can't do more than 86MH/s, no matter the temperature. Issue is in the BIOS as when power reaches 205W it throttles. I am using MSI Curve with minimum allowable voltage, 0.725 (in reality 0.731), and 1125MHz. If I use normal PL level it does not do more than 82MH/s. Also it must have a minus 120MHz on the memory, if I give it more it throttles instantly to 60-70MH/s. Stay away from the Gaming X for minig! PS. Yes, you loose warranty if: you change BIOS with any BIOS not destined for Gaming X (exception the 2 official ones= OC mode and silent mode - tested both, same 205W throttle limit), or if you remove the seal on the 4th GPU screw. It's very strange, as I saw on some reviews, this card have TDP of 340w right? Source: Toms Hardware: https://www.tomshardware.com/reviews/msi-geforce-rtx-3080-gaming-x-trio-review I have an EVGA 3080 and I'm doing 98 stable, with 230w on software and 250w at the wall - I did fan curve to reach 1200Mhs on core clock with 718mv - 70% TDP 3080s are power hungry, and if I reduce even 1%, the card start to hash a lot less Mhs I think your 1125Mhz on core clock is low, here I need exactly 1200mhz But I don't know why your card only have 205w until throttle Is it possible your card is having this throttle because of memory temperature? Maybe after hit some temperature, the bios reduce the wattage to cool the board Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on January 13, 2021, 11:22:00 PM EVGA XC3 ULTRA GAMING, getting 102 MH/s when not using the monitor, no throttling. Fans at 60%, +1500 memory, -200 GPU, 70 PL @ ~240W. Had a Gigabyte Gaming OC before; was thermal throttling with PL 60, was pulling between 85-91 MH/s. Glad to be rid of it. Thats odd i tested my friends xc3 ultra and it throttled after 1 min of doing 100 mhs. Title: Re: RTX 3080 hashrate drop list Post by: Xereo on January 14, 2021, 08:02:56 PM Gigabyte Aorus Xtreme - 99.5 mh no throttling with 80% fan
Title: Re: RTX 3080 hashrate drop list Post by: PatoFontanet on January 14, 2021, 09:01:58 PM Hi Guys, i have a Gigabyte 3080 Eagle OC with these thermal throttling issues. I'm aware that there is a fix for this, but warranty is voided if i disassemble the GPU, so, i was thinking on puting an aluminum heat sink with thermal pads on the Backplate, or some thermal pads and somewhat of a 80mm cooler. Has anyone tried any of this? Maybe there is some that i can do to lower the temps on the VRM/VRAM, i know that this gap between the PCB and backplate is the real issue. Again, RMA this GPU and getting another 3080 is near impossible in my country and i want to get some decent hashrates whenever i'm not playing videogames.
https://www.overclock.net/threads/gpu-backplate-mod.1471349/ (https://www.overclock.net/threads/gpu-backplate-mod.1471349/) Cheers. Title: Re: RTX 3080 hashrate drop list Post by: ummasek on January 14, 2021, 11:07:39 PM Zotac 3080 AMP Halo
I`ve got 3 of them - 1 is thortlteing - other 2 are not. core -100, mem 1200, pl 220, fan 75 - gets 78Mhash for 180W - core temp 44 core -100, mem 1200, pl 190, fan 99 - gets 82Mhash for 190W - core temp 39 I had one, bought 2 more today :/ housed in same spot What do you sugests ? 1. Run it under windows and undervolt hard 2. Sell it ASAP - not verry easy to get new one or replace. 3. i`m waiting for an manufacturer answer for my question - WTF ?! - In thorttle state, i cant change PL, even lower than 180 :/ ?! EDIT: THX to thiss community, hint with mem -200 helped but not solved problem. core -100, mem -200, pl 215, fan 99 - gives 86Mhash for 195 - core temp 41 - power jumps 195-205 and sommetimes it`s mining at speed of 87. EDIT2: It`s this model : ZT-A30800F-10P - ZOTAC 3080 AMP HOLO Title: Re: RTX 3080 hashrate drop list Post by: Fernan87 on January 15, 2021, 03:51:41 PM 1º Zotac HOLO, getting 98.5 MH/s, no throttling.
+1100 memory, -300 GPU, 68 PL @ ~231W. 2º Zotac HOLO, getting 98.5 MH/s, throttling at higher clocks (not much, it drops 4mhs). +1100 memory, -300 GPU, 68 PL @ ~231W. Title: Re: RTX 3080 hashrate drop list Post by: ShinyGG on January 15, 2021, 09:16:11 PM Updating the thread:
MSI Suprim X: Have 2. One will cause a crash at more than +1000 memory, hashes around 92 only. The other one is perfect at 99-100mhs, 35-40C on 1200 memory -500 clock, 60% PW 60% Fan Palit Gamerock: 6 of them in total, all run 98-101 at 200W, by far the best card for mining. +1200 mem, -500 clock, 60%, 60% Title: Re: RTX 3080 hashrate drop list Post by: ummasek on January 15, 2021, 09:35:26 PM 1º Zotac HOLO, getting 98.5 MH/s, no throttling. +1100 memory, -300 GPU, 68 PL @ ~231W. 2º Zotac HOLO, getting 98.5 MH/s, throttling at higher clocks (not much, it drops 4mhs). +1100 memory, -300 GPU, 68 PL @ ~231W. What OS, what miner ? Need to check it on HiveOs :) Edit: Zotac support official statment: We do not support mining. GPu works gr8 in gaming - checked that today. Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on January 16, 2021, 02:15:16 AM Updating the thread: MSI Suprim X: Have 2. One will cause a crash at more than +1000 memory, hashes around 92 only. The other one is perfect at 99-100mhs, 35-40C on 1200 memory -500 clock, 60% PW 60% Fan Palit Gamerock: 6 of them in total, all run 98-101 at 200W, by far the best card for mining. +1200 mem, -500 clock, 60%, 60% Are both suprim x on the same bios ? I’m planning on making a 6 gpu rig with all suprim x . Don’t tell me they don’t all hit 99-100 Title: Re: RTX 3080 hashrate drop list Post by: Yodermor on January 16, 2021, 08:09:32 AM I would like to share my result of using a "3080 GALAX OC" to mine ETH from Ethermine Asia server (phoenix miner)
I can do 101 Reported hashrate MS/s 240 KW on my PC BUT!! There is a problem with Temperature If the temp goes above 60 degree, hashrate will drop from 101 to around 80 MH/s AND I would like to ask about Current and Reported Hashrate From my Dashboard sonetimes show: Current: 85-100 MH/s Report: 101 MH/s How can i made the current hashrate to be more consistency? Thanks Title: Re: RTX 3080 hashrate drop list Post by: Fernan87 on January 18, 2021, 05:00:36 PM 1º Zotac HOLO, getting 98.5 MH/s, no throttling. +1100 memory, -300 GPU, 68 PL @ ~231W. 2º Zotac HOLO, getting 98.5 MH/s, throttling at higher clocks (not much, it drops 4mhs). +1100 memory, -300 GPU, 68 PL @ ~231W. What OS, what miner ? Need to check it on HiveOs :) Edit: Zotac support official statment: We do not support mining. GPu works gr8 in gaming - checked that today. I don´t use Hive OS. I mine with Windows and Phoenix miner. Title: Re: RTX 3080 hashrate drop list Post by: ummasek on January 18, 2021, 05:47:13 PM Share You`re command line.
I was using phoenix, but was slower than nbminer....but i`m getting 92 max.... it`s my gaming pc...normally im using hive for mining. Title: Re: RTX 3080 hashrate drop list Post by: Erpelusas on January 18, 2021, 11:07:22 PM Galax / KFA2. GeForce RTX 3080 SG (1-Click OC).
HiveOs. Drivers Nvidia 455.45.01 Hash 96.62 MH Temp 56° rpm. 60% Power Limit 225 W Core +150 Micron Mem HiveOs 1760 . Windows +880 Watts 225 No problem. Title: Re: RTX 3080 hashrate drop list Post by: agente on January 19, 2021, 05:48:00 PM Updating the thread: MSI Suprim X: Have 2. One will cause a crash at more than +1000 memory, hashes around 92 only. The other one is perfect at 99-100mhs, 35-40C on 1200 memory -500 clock, 60% PW 60% Fan Palit Gamerock: 6 of them in total, all run 98-101 at 200W, by far the best card for mining. +1200 mem, -500 clock, 60%, 60% 3x 8pin ::) Title: Re: RTX 3080 hashrate drop list Post by: jelome198959 on January 21, 2021, 05:44:57 AM Zotac 3080 AMP HOLO started to throttle at 30c ambient.
If I keep it at 227w and core at 55c it is fine at 99mh/s. I don't think any of my 3080 can hold 35c+ ambients. Might be forced to limit to 210w and +800mem. Title: Re: RTX 3080 hashrate drop list Post by: lasttimei on January 23, 2021, 06:27:02 PM Hi i know this is old now but not finding much info.
I'm able to do +1300 on memory with 60% fan speed, but it has to be really cold, can get 100mhs. Soo i'm trying to lower the mem temp power limit 66, memory +850, Fan 60 and it goes down to 86mhs. Just wondering if a 2mm thermal pad would be ok? Thermal Grizzly Minus Pad 8. Can i just do the back don't want to replace the front. I'm just planning to do the igors pad mod. Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on January 23, 2021, 09:24:23 PM Hi i know this is old now but not finding much info. I'm able to do +1300 on memory with 60% fan speed, but it has to be really cold, can get 100mhs. Soo i'm trying to lower the mem temp power limit 66, memory +850, Fan 60 and it goes down to 86mhs. Just wondering if a 2mm thermal pad would be ok? Thermal Grizzly Minus Pad 8. Can i just do the back don't want to replace the front. I'm just planning to do the igors pad mod. My 3080’s are not thermal throttling but i did notice the backplate is super hot where the memory and vrams are located so i put a 120mm case fan on there . Now its just warm to the touch not burning anymore . Maybe try that and see if it fixes ur problem before u open ur card . Title: Re: RTX 3080 hashrate drop list Post by: lasttimei on January 23, 2021, 11:50:44 PM Yeah tried that atm i've a ryzen cpu heatsink at the top and it works somewhat, but i think ima try the thermal pad mod , just hope that the 2mm works fine.
Title: Re: RTX 3080 hashrate drop list Post by: jelome198959 on January 24, 2021, 12:09:12 PM Just noticed if I set the fans to auto on my Zotac, at 32c ambient fans went straight up to 100%. Definitely on the throttling side. I deshrouded it and zip tied 2x 140mm fans and according to HWINFO, fans are now at 75%. Went down from 100% to 75%. Big help. Let's see if this holds at 35c summer temps. Also checked the pads of the Zotac Amp Holo --- they are 2mm. Will replace the pads later if this still doesn't hold.
Yeah tried that atm i've a ryzen cpu heatsink at the top and it works somewhat, but i think ima try the thermal pad mod , just hope that the 2mm works fine. How does this work? I mean how did you mount the heatsink?My 3080’s are not thermal throttling but i did notice the backplate is super hot where the memory and vrams are located so i put a 120mm case fan on there . Can you please post pictures? Kinda interested how you did itNow its just warm to the touch not burning anymore . Maybe try that and see if it fixes ur problem before u open ur card . Title: Re: RTX 3080 hashrate drop list Post by: puntodecontrol on January 24, 2021, 03:14:00 PM Title: Re: RTX 3080 hashrate drop list Post by: lasttimei on January 24, 2021, 05:08:06 PM Just noticed if I set the fans to auto on my Zotac, at 32c ambient fans went straight up to 100%. Definitely on the throttling side. I deshrouded it and zip tied 2x 140mm fans and according to HWINFO, fans are now at 75%. Went down from 100% to 75%. Big help. Let's see if this holds at 35c summer temps. Also checked the pads of the Zotac Amp Holo --- they are 2mm. Will replace the pads later if this still doesn't hold. Yeah tried that atm i've a ryzen cpu heatsink at the top and it works somewhat, but i think ima try the thermal pad mod , just hope that the 2mm works fine. How does this work? I mean how did you mount the heatsink?My 3080’s are not thermal throttling but i did notice the backplate is super hot where the memory and vrams are located so i put a 120mm case fan on there . Can you please post pictures? Kinda interested how you did itNow its just warm to the touch not burning anymore . Maybe try that and see if it fixes ur problem before u open ur card . i just dropped a cheap ryzen heatsink on top of it still not fixed but lowered temps a bit. I think this would work better if you dont want to open your card. This has to be a 3090 since there's no way a 120mm fan would fit, unless its smaller fan. Got this image from a search, https://imgur.com/gallery/tkLoZnt I'm going to be trying something like this https://i.imgur.com/ZkaRTbs.jpg I'm not opening the front looks like too much work, just the backside. unless this doesn't fix it. My 3080FTW3 i think its probably the best card it can be really hot and it still pushes 100mhs. Should be getting a few strix 3080 hope thats also good with memory cooling. and another FE -_-probably selling it to a friend if i cant fix this one. Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on January 24, 2021, 05:17:10 PM Just noticed if I set the fans to auto on my Zotac, at 32c ambient fans went straight up to 100%. Definitely on the throttling side. I deshrouded it and zip tied 2x 140mm fans and according to HWINFO, fans are now at 75%. Went down from 100% to 75%. Big help. Let's see if this holds at 35c summer temps. Also checked the pads of the Zotac Amp Holo --- they are 2mm. Will replace the pads later if this still doesn't hold. Yeah tried that atm i've a ryzen cpu heatsink at the top and it works somewhat, but i think ima try the thermal pad mod , just hope that the 2mm works fine. How does this work? I mean how did you mount the heatsink?My 3080’s are not thermal throttling but i did notice the backplate is super hot where the memory and vrams are located so i put a 120mm case fan on there . Can you please post pictures? Kinda interested how you did itNow its just warm to the touch not burning anymore . Maybe try that and see if it fixes ur problem before u open ur card . I would but i have no clue how to post pics on this site . On ur backplate u have that spot where the mlcc/moscaps are showing . Well put a 120mm fan right on it and let it blow air on that area . Card were running at between 44-48C during the day , now they at 41-44 but the main goal of this mod was to cool the memory and vram which i believe it did since the backplate is way cooler than before . Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on January 24, 2021, 05:22:00 PM Just noticed if I set the fans to auto on my Zotac, at 32c ambient fans went straight up to 100%. Definitely on the throttling side. I deshrouded it and zip tied 2x 140mm fans and according to HWINFO, fans are now at 75%. Went down from 100% to 75%. Big help. Let's see if this holds at 35c summer temps. Also checked the pads of the Zotac Amp Holo --- they are 2mm. Will replace the pads later if this still doesn't hold. Yeah tried that atm i've a ryzen cpu heatsink at the top and it works somewhat, but i think ima try the thermal pad mod , just hope that the 2mm works fine. How does this work? I mean how did you mount the heatsink?My 3080’s are not thermal throttling but i did notice the backplate is super hot where the memory and vrams are located so i put a 120mm case fan on there . Can you please post pictures? Kinda interested how you did itNow its just warm to the touch not burning anymore . Maybe try that and see if it fixes ur problem before u open ur card . i just dropped a cheap ryzen heatsink on top of it still not fixed but lowered temps a bit. I think this would work better if you dont want to open your card. This has to be a 3090 since there's no way a 120mm fan would fit, unless its smaller fan. Got this image from a search, https://imgur.com/gallery/tkLoZnt I'm going to be trying something like this https://i.imgur.com/ZkaRTbs.jpg I'm not opening the front looks like too much work, just the backside. unless this doesn't fix it. My 3080FTW3 i think its probably the best card it can be really hot and it still pushes 100mhs. Should be getting a few strix 3080 hope thats also good with memory cooling. and another FE -_-probably selling it to a friend if i cant fix this one. Have u put thermal pads under those heatsinks ? I was thinking of doing that but the fan fix did it for me cause i don’t have an FE and the mlcc area is open so air gets through to the mem/vram Title: Re: RTX 3080 hashrate drop list Post by: btcshiner on January 26, 2021, 12:07:13 AM Apparently if you put your rig in a electric vehicle you can drive around and the air flow will reduce any thermal throttling....
https://www.tomshardware.com/news/the-fastest-rtx-3080-mining-rig-is-a-bmw-i8 Title: Re: RTX 3080 hashrate drop list Post by: fenomenyaa on January 26, 2021, 05:37:25 PM HWInfo version 6.42 can now also display the GDDR6X temperatures
Guys pls share results.. Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on January 26, 2021, 08:59:00 PM HWInfo version 6.42 can now also display the GDDR6X temperatures Guys pls share results.. Would that be GPU memory junction temperature ? Title: Re: RTX 3080 hashrate drop list Post by: philipma1957 on January 27, 2021, 01:02:01 AM HWInfo version 6.42 can now also display the GDDR6X temperatures Guys pls share results.. Would that be GPU memory junction temperature ? yeah I loaded 6.4.2 and don't see a number claiming to be ram temp. but I have access to a 3060ti which uses gddr6 https://www.gigabyte.com/Graphics-Card/GV-N306TAORUS-M-8GD#kf Title: Re: RTX 3080 hashrate drop list Post by: jelome198959 on January 27, 2021, 03:21:45 AM Yeah, just updated to HWINFO 6.42. It does indeed show memory temperatures. Just under GPU Core temp. But only for GDDR6X. It doesn't show GDDR6 temps, maybe not necessary as it doesn't run hot?
Here's mine at 28c ambient: (a bit cold today, some days temps reach 32c, will update later) Asus TUF - 98c MSI Ventus - 108c (near throttling) Zotac AMP Holo - 96c Gainward Phoenix - 86c Palit GamingPro - 88c All at +1000 memory except Palit at +700. The Asus, MSI and Zotac are deshrouded, and I have zip tied 120mm/140mm fans. Zip-tied fans are running at 90% speeds. Surprisingly, the cheapest 3080s on my rig perform the best, and they're not deshrouded, fans at 70% for both. The more expensive brands perform worse, even though they are deshrouded with high quality fans! Title: Re: RTX 3080 hashrate drop list Post by: ildotoress on January 27, 2021, 09:20:56 AM I've been playing with my MSI 3080Gaming X Trio for the days. It can't do more than 86MH/s, no matter the temperature. Issue is in the BIOS as when power reaches 205W it throttles. I am using MSI Curve with minimum allowable voltage, 0.725 (in reality 0.731), and 1125MHz. If I use normal PL level it does not do more than 82MH/s. Also it must have a minus 120MHz on the memory, if I give it more it throttles instantly to 60-70MH/s. Stay away from the Gaming X for minig! PS. Yes, you loose warranty if: you change BIOS with any BIOS not destined for Gaming X (exception the 2 official ones= OC mode and silent mode - tested both, same 205W throttle limit), or if you remove the seal on the 4th GPU screw. It's very strange, as I saw on some reviews, this card have TDP of 340w right? Source: Toms Hardware: https://www.tomshardware.com/reviews/msi-geforce-rtx-3080-gaming-x-trio-review I have an EVGA 3080 and I'm doing 98 stable, with 230w on software and 250w at the wall - I did fan curve to reach 1200Mhs on core clock with 718mv - 70% TDP 3080s are power hungry, and if I reduce even 1%, the card start to hash a lot less Mhs I think your 1125Mhz on core clock is low, here I need exactly 1200mhz But I don't know why your card only have 205w until throttle Is it possible your card is having this throttle because of memory temperature? Maybe after hit some temperature, the bios reduce the wattage to cool the board I also tried 1200MHz, 1225, 1250, 1300, etc The Gaming X is pure crap. After seeing the VRM analysis I understood why. It has an underwhelming implementation that does deliver the necessary power but because it cuts corners in quality so it overheats massively in doing it. And as a cherry on the top, the VRM and memory cooling is not efficient as the cooler does not have a coper base plate but direct contact width the heat pipes (and also a small micro radiator which is covered with a thermal pad so no airflow can flow over it :o). That is the reason for throttling at exactly 205W. So I sold it to some one else to use it for mining (he did not care about warranty and wanted to add the Suprim X BIOS). Now I got instead for the same money a Suprim X which does: 100MH/s @ 0.725V with 1250MHz Core and + 1200MHz VRAM, 60% Fan (1800rpm). Now I'm happy a camper ;D PS. @agente, please remove the Gaming X from your no throttle list as that is a pure lie! Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on January 27, 2021, 10:10:07 AM My personal experience with the Asus TuF 3080 (Watercooled):
max Ram +1149 = 98.6 MHs ETH Going higher results in lower MHs. So it might be other cards have faster ram timings. VRAM Temp: 70 degrees. https://s12.directupload.net/images/210127/temp/smqhmycs.png (https://www.directupload.net/file/d/6076/smqhmycs_png.htm) Title: Re: RTX 3080 hashrate drop list Post by: ShinyGG on January 27, 2021, 10:22:45 AM Updating everyone on the results after updating to HWinfo 6.42:
GPU temp followed by Memory Junction Temp: 1. GameRock: 66C, 96C 2. GameRock: 63, 98 3. GameRock: 55, 92 4. GameRock: 66, 106!? 5. GameRock: 52, 88 6. MSI Suprim X: 40, 90 7. GameRock: 43, 76 8. GameRock: 62, 94 9. MSI Suprim X: 51, 98 10. EVGA FTW3 Ultra: 62, 96 Clocks: -500 clock, +1000 Memory on all but number 7 & 8 sitting at +800. Is this expected? Someone mentioned that the temps aren't for actual VRAM here, but reflect something else entirely? Im worried this isn't normal? As for my room temps, it's around 20-25 I imagine. I dont have a thermometer here unfortunately. Title: Re: RTX 3080 hashrate drop list Post by: ShinyGG on January 27, 2021, 10:32:52 AM Updating the thread: MSI Suprim X: Have 2. One will cause a crash at more than +1000 memory, hashes around 92 only. The other one is perfect at 99-100mhs, 35-40C on 1200 memory -500 clock, 60% PW 60% Fan Palit Gamerock: 6 of them in total, all run 98-101 at 200W, by far the best card for mining. +1200 mem, -500 clock, 60%, 60% Are both suprim x on the same bios ? I’m planning on making a 6 gpu rig with all suprim x . Don’t tell me they don’t all hit 99-100 I did not play around with the BIOS, I assumed I just didn't get lucky with the 2nd one. They can push to 99, but I'd rather prefer stability over the extra 2-2.5H. Running them at 96 and 94 respectively. Title: Re: RTX 3080 hashrate drop list Post by: agente on January 27, 2021, 11:54:47 AM PS. @agente, please remove the Gaming X from your no throttle list as that is a pure lie! I moved to "Some throttle, some do not". Waiting more reviews.. Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on January 27, 2021, 01:39:38 PM I've been playing with my MSI 3080Gaming X Trio for the days. It can't do more than 86MH/s, no matter the temperature. Issue is in the BIOS as when power reaches 205W it throttles. I am using MSI Curve with minimum allowable voltage, 0.725 (in reality 0.731), and 1125MHz. If I use normal PL level it does not do more than 82MH/s. Also it must have a minus 120MHz on the memory, if I give it more it throttles instantly to 60-70MH/s. Stay away from the Gaming X for minig! PS. Yes, you loose warranty if: you change BIOS with any BIOS not destined for Gaming X (exception the 2 official ones= OC mode and silent mode - tested both, same 205W throttle limit), or if you remove the seal on the 4th GPU screw. It's very strange, as I saw on some reviews, this card have TDP of 340w right? Source: Toms Hardware: https://www.tomshardware.com/reviews/msi-geforce-rtx-3080-gaming-x-trio-review I have an EVGA 3080 and I'm doing 98 stable, with 230w on software and 250w at the wall - I did fan curve to reach 1200Mhs on core clock with 718mv - 70% TDP 3080s are power hungry, and if I reduce even 1%, the card start to hash a lot less Mhs I think your 1125Mhz on core clock is low, here I need exactly 1200mhz But I don't know why your card only have 205w until throttle Is it possible your card is having this throttle because of memory temperature? Maybe after hit some temperature, the bios reduce the wattage to cool the board I also tried 1200MHz, 1225, 1250, 1300, etc The Gaming X is pure crap. After seeing the VRM analysis I understood why. It has an underwhelming implementation that does deliver the necessary power but because it cuts corners in quality so it overheats massively in doing it. And as a cherry on the top, the VRM and memory cooling is not efficient as the cooler does not have a coper base plate but direct contact width the heat pipes (and also a small micro radiator which is covered with a thermal pad so no airflow can flow over it :o). That is the reason for throttling at exactly 205W. So I sold it to some one else to use it for mining (he did not care about warranty and wanted to add the Suprim X BIOS). Now I got instead for the same money a Suprim X which does: 100MH/s @ 0.725V with 1250MHz Core and + 1200MHz VRAM, 60% Fan (1800rpm). Now I'm happy a camper ;D PS. @agente, please remove the Gaming X from your no throttle list as that is a pure lie! If thats the case why would the suprim bios make it go over 205W ? I think msi pwr throttled this card so it doesnt compete with the suprim X model . I have the gaming trio X in my gaming pc mining at 100mhs . Gpu temp is 48C , gpu junction temp is 108C On open air frame 1th suprim X : 44C , 93-94C 2nd suprimX : 41C , 92C Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on January 27, 2021, 01:42:18 PM Updating the thread: MSI Suprim X: Have 2. One will cause a crash at more than +1000 memory, hashes around 92 only. The other one is perfect at 99-100mhs, 35-40C on 1200 memory -500 clock, 60% PW 60% Fan Palit Gamerock: 6 of them in total, all run 98-101 at 200W, by far the best card for mining. +1200 mem, -500 clock, 60%, 60% Are both suprim x on the same bios ? I’m planning on making a 6 gpu rig with all suprim x . Don’t tell me they don’t all hit 99-100 I did not play around with the BIOS, I assumed I just didn't get lucky with the 2nd one. They can push to 99, but I'd rather prefer stability over the extra 2-2.5H. Running them at 96 and 94 respectively. I have 2 of them and both running at 100mhs . Mem is +1300 Both on gaming mode bios. Didnt test silent mode to see if it reduces the hashing . Title: Re: RTX 3080 hashrate drop list Post by: jelome198959 on January 27, 2021, 03:55:34 PM Gaming X Trio stock bios has some memory limitation as said by other users.
But it doesn't throttle because of overheating, it's throttling because of some bios limitation. That's why when flashing Suprim X bios, it's fixed, as evidenced by Seph213... We also talked about this earlier in this thread. Title: Re: RTX 3080 hashrate drop list Post by: ildotoress on January 28, 2021, 09:47:27 AM Yes, there are two issues:
1.Lower quality VRM and lower efficiency cooling solution on the Gaming X compared to Suprim (resulting in higher overall AND Vram temp) 2.Lower BIOS limit for throttling, as I have complained initially and it was proven by the users who used the Suprim Bios on the Gaming X. MSI does not want to give a different tuned BIOS for the Gaming X. So the conclusion remains, avoid this implementation if possible. Title: Re: RTX 3080 hashrate drop list Post by: Erpelusas on January 28, 2021, 08:55:35 PM Galax / KFA2. GeForce RTX 3080 SG (1-Click OC). HiveOs. Drivers Nvidia 455.45.01 Hash 96.62 MH Temp 56° rpm. 60% Power Limit 225 W Core +150 Micron Mem HiveOs 1760 . Windows +880 Watts 225 No problem. UPGRADE.: Hash 96.58 MH Temp 54° rpm. 60% Power Limit 220 W Core +100 Micron Mem HiveOs 1750 . Watts 220 Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on January 29, 2021, 03:15:24 PM The fan on the backplate pushing air on the mlcc area drops temps by 2C only .
Would need to see if putting thermal pads on the backplate+ heatsink with fan blowing on it would reduce those Vrams/mem temps . Are they made to run this hot ? Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on January 29, 2021, 06:03:13 PM For all 3080 buyers... think about watercooling.
This drops the temperatur to 70 degrees (VRAM). Title: Re: RTX 3080 hashrate drop list Post by: fenomenyaa on January 29, 2021, 06:20:27 PM Asus 3080 TUF OC open frame rig
Hash 101.42 MH Temp core 49° mem 104° rpm. 90% Core 0 samsung Mem Windows +1400 Watts 234w Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on January 29, 2021, 06:27:24 PM @fenomenyaa
Thats the card i have.... with ek waterblock. Title: Re: RTX 3080 hashrate drop list Post by: ShinyGG on January 29, 2021, 09:37:20 PM Asus 3080 TUF OC open frame rig Hash 101.42 MH Temp core 49° mem 104° rpm. 90% Core 0 samsung Mem Windows +1400 Watts 234w I suppose you're speaking to those with 1-3 cards, how are we supposed to watercool entire rigs? ;D Title: Re: RTX 3080 hashrate drop list Post by: digital$ on January 29, 2021, 09:38:48 PM temps on these 3080's are hot, how does 3060TI compare on mem temp? can get 4x3080 but thinking perhaps 6 or 7 3060's would be better...95 Celsius+ @24/7 cant be sustainable over months and months
Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on January 30, 2021, 03:54:46 AM @ShinyGG
Did a service on 1 of my rigs a few weeks ago. https://s12.directupload.net/images/210130/temp/49hnflxv.jpg (https://www.directupload.net/file/d/6079/49hnflxv_jpg.htm) https://s12.directupload.net/images/210130/temp/v2du8wr9.jpg (https://www.directupload.net/file/d/6079/v2du8wr9_jpg.htm) Sorry about the cable management. Did it after the pics. 0: Gigabyte GTX 1080 8GB 86.04.3B.40.61 1607/4519 30.39 MH/s 101 W 61°C / 0% 1: Gigabyte GTX 1080 8GB 86.04.17.40.38 1620/4519 30.45 MH/s 101 W 62°C / 0% 2: Gigabyte GTX 1080 8GB 86.04.17.40.38 1582/4519 30.13 MH/s 101 W 60°C / 0% 3: Gigabyte GTX 1080 8GB 86.04.17.40.38 1645/4519 30.66 MH/s 101 W 56°C / 0% 4: Gigabyte GTX 1080 8GB 86.04.17.40.38 1582/4519 30.22 MH/s 102 W 55°C / 0% 5: Evga GTX 1080 8GB 86.04.17.00.80 1632/4519 30.66 MH/s 101 W 58°C / 0% 6: Gigabyte GTX 1080 8GB 86.04.17.40.38 1594/4519 30.42 MH/s 100 W 60°C / 0% 7: Gigabyte GTX 1080 8GB 86.04.17.40.38 1632/4519 30.65 MH/s 101 W 59°C / 0% 243.58 MH/s 848 W Eth: Share actual difficulty: 226.8 GH (!) Eth: Share accepted in 14 ms Eth speed: 243.542 MH/s, shares: 19566/0/0, time: 199:06 GPUs: 1: 30.374 MH/s (2519) 2: 30.444 MH/s (2441) 3: 30.134 MH/s (2486) 4: 30.660 MH/s (2487) 5: 30.223 MH/s (2361) 6: 30.656 MH/s (2444) 7: 30.402 MH/s (2454) 8: 30.649 MH/s (2374) Eth: New job #0d67a81a from eth.2miners.com:2020; diff: 8726MH Eth speed: 243.555 MH/s, shares: 19566/0/0, time: 199:06 GPUs: 1: 30.379 MH/s (2519) 2: 30.445 MH/s (2441) 3: 30.139 MH/s (2486) 4: 30.660 MH/s (2487) 5: 30.225 MH/s (2361) 6: 30.657 MH/s (2444) 7: 30.404 MH/s (2454) 8: 30.648 MH/s (2374) Eth: New job #34046e5a from eth.2miners.com:2020; diff: 8726MH Eth speed: 243.563 MH/s, shares: 19566/0/0, time: 199:06 GPUs: 1: 30.375 MH/s (2519) 2: 30.444 MH/s (2441) 3: 30.142 MH/s (2486) 4: 30.660 MH/s (2487) 5: 30.223 MH/s (2361) 6: 30.657 MH/s (2444) 7: 30.412 MH/s (2454) 8: 30.649 MH/s (2374) GPU1: 60C 0% 102W, GPU2: 62C 0% 101W, GPU3: 60C 0% 102W, GPU4: 56C 0% 103W, GPU5: 55C 0% 102W, GPU6: 58C 0% 101W, GPU7: 60C 0% 103W, GPU8: 59C 0% 102W GPUs power: 815.7 W Still collecting enough 3070 zotac edge for the next watercooled. Difficult to get for a good price. Title: Re: RTX 3080 hashrate drop list Post by: SirGallahad on February 01, 2021, 08:04:45 AM Gygabite Aorus RTX 3080 Xtreme Watercooler (AiO WC)
Windows 10 - latest nVidia drivers Hash +/-93 MH Miner / 101MH Pool Temp 42°C rpm. 30% Power Limit 220 W (60%) Core +0 Mem Windows +750 - Unstable with more. Mem temp : 90°C ?? No sure if HWMonitor get the right temp or if gygabite lied about the full cover WC AiO. Title: Re: RTX 3080 hashrate drop list Post by: th00ber on February 01, 2021, 12:56:53 PM @ShinyGG Did a service on 1 of my rigs a few weeks ago. Sorry about the cable management. Did it after the pics. 0: Gigabyte GTX 1080 8GB 86.04.3B.40.61 1607/4519 30.39 MH/s 101 W 61°C / 0% 1: Gigabyte GTX 1080 8GB 86.04.17.40.38 1620/4519 30.45 MH/s 101 W 62°C / 0% 2: Gigabyte GTX 1080 8GB 86.04.17.40.38 1582/4519 30.13 MH/s 101 W 60°C / 0% 3: Gigabyte GTX 1080 8GB 86.04.17.40.38 1645/4519 30.66 MH/s 101 W 56°C / 0% 4: Gigabyte GTX 1080 8GB 86.04.17.40.38 1582/4519 30.22 MH/s 102 W 55°C / 0% 5: Evga GTX 1080 8GB 86.04.17.00.80 1632/4519 30.66 MH/s 101 W 58°C / 0% 6: Gigabyte GTX 1080 8GB 86.04.17.40.38 1594/4519 30.42 MH/s 100 W 60°C / 0% 7: Gigabyte GTX 1080 8GB 86.04.17.40.38 1632/4519 30.65 MH/s 101 W 59°C / 0% 243.58 MH/s 848 W Eth: Share actual difficulty: 226.8 GH (!) Eth: Share accepted in 14 ms Eth speed: 243.542 MH/s, shares: 19566/0/0, time: 199:06 GPUs: 1: 30.374 MH/s (2519) 2: 30.444 MH/s (2441) 3: 30.134 MH/s (2486) 4: 30.660 MH/s (2487) 5: 30.223 MH/s (2361) 6: 30.656 MH/s (2444) 7: 30.402 MH/s (2454) 8: 30.649 MH/s (2374) Eth: New job #0d67a81a from eth.2miners.com:2020; diff: 8726MH Eth speed: 243.555 MH/s, shares: 19566/0/0, time: 199:06 GPUs: 1: 30.379 MH/s (2519) 2: 30.445 MH/s (2441) 3: 30.139 MH/s (2486) 4: 30.660 MH/s (2487) 5: 30.225 MH/s (2361) 6: 30.657 MH/s (2444) 7: 30.404 MH/s (2454) 8: 30.648 MH/s (2374) Eth: New job #34046e5a from eth.2miners.com:2020; diff: 8726MH Eth speed: 243.563 MH/s, shares: 19566/0/0, time: 199:06 GPUs: 1: 30.375 MH/s (2519) 2: 30.444 MH/s (2441) 3: 30.142 MH/s (2486) 4: 30.660 MH/s (2487) 5: 30.223 MH/s (2361) 6: 30.657 MH/s (2444) 7: 30.412 MH/s (2454) 8: 30.649 MH/s (2374) GPU1: 60C 0% 102W, GPU2: 62C 0% 101W, GPU3: 60C 0% 102W, GPU4: 56C 0% 103W, GPU5: 55C 0% 102W, GPU6: 58C 0% 101W, GPU7: 60C 0% 103W, GPU8: 59C 0% 102W GPUs power: 815.7 W Still collecting enough 3070 zotac edge for the next watercooled. Difficult to get for a good price. You run a rig of 1080 Without using the enlargment pills ? From what I read about this Pills, you should get 10 MH/s more per card Title: Re: RTX 3080 hashrate drop list Post by: almartins on February 01, 2021, 03:48:33 PM @ShinyGG Did a service on 1 of my rigs a few weeks ago. Sorry about the cable management. Did it after the pics. 0: Gigabyte GTX 1080 8GB 86.04.3B.40.61 1607/4519 30.39 MH/s 101 W 61°C / 0% 1: Gigabyte GTX 1080 8GB 86.04.17.40.38 1620/4519 30.45 MH/s 101 W 62°C / 0% 2: Gigabyte GTX 1080 8GB 86.04.17.40.38 1582/4519 30.13 MH/s 101 W 60°C / 0% 3: Gigabyte GTX 1080 8GB 86.04.17.40.38 1645/4519 30.66 MH/s 101 W 56°C / 0% 4: Gigabyte GTX 1080 8GB 86.04.17.40.38 1582/4519 30.22 MH/s 102 W 55°C / 0% 5: Evga GTX 1080 8GB 86.04.17.00.80 1632/4519 30.66 MH/s 101 W 58°C / 0% 6: Gigabyte GTX 1080 8GB 86.04.17.40.38 1594/4519 30.42 MH/s 100 W 60°C / 0% 7: Gigabyte GTX 1080 8GB 86.04.17.40.38 1632/4519 30.65 MH/s 101 W 59°C / 0% 243.58 MH/s 848 W Eth: Share actual difficulty: 226.8 GH (!) Eth: Share accepted in 14 ms Eth speed: 243.542 MH/s, shares: 19566/0/0, time: 199:06 GPUs: 1: 30.374 MH/s (2519) 2: 30.444 MH/s (2441) 3: 30.134 MH/s (2486) 4: 30.660 MH/s (2487) 5: 30.223 MH/s (2361) 6: 30.656 MH/s (2444) 7: 30.402 MH/s (2454) 8: 30.649 MH/s (2374) Eth: New job #0d67a81a from eth.2miners.com:2020; diff: 8726MH Eth speed: 243.555 MH/s, shares: 19566/0/0, time: 199:06 GPUs: 1: 30.379 MH/s (2519) 2: 30.445 MH/s (2441) 3: 30.139 MH/s (2486) 4: 30.660 MH/s (2487) 5: 30.225 MH/s (2361) 6: 30.657 MH/s (2444) 7: 30.404 MH/s (2454) 8: 30.648 MH/s (2374) Eth: New job #34046e5a from eth.2miners.com:2020; diff: 8726MH Eth speed: 243.563 MH/s, shares: 19566/0/0, time: 199:06 GPUs: 1: 30.375 MH/s (2519) 2: 30.444 MH/s (2441) 3: 30.142 MH/s (2486) 4: 30.660 MH/s (2487) 5: 30.223 MH/s (2361) 6: 30.657 MH/s (2444) 7: 30.412 MH/s (2454) 8: 30.649 MH/s (2374) GPU1: 60C 0% 102W, GPU2: 62C 0% 101W, GPU3: 60C 0% 102W, GPU4: 56C 0% 103W, GPU5: 55C 0% 102W, GPU6: 58C 0% 101W, GPU7: 60C 0% 103W, GPU8: 59C 0% 102W GPUs power: 815.7 W Still collecting enough 3070 zotac edge for the next watercooled. Difficult to get for a good price. You run a rig of 1080 Without using the enlargment pills ? From what I read about this Pills, you should get 10 MH/s more per card Where did you see the 1080 give more than 30 MH/s at 100 W? Title: Re: RTX 3080 hashrate drop list Post by: Erpelusas on February 01, 2021, 04:50:36 PM Galax / KFA2. GeForce RTX 3080 SG (1-Click OC). HiveOs. Drivers Nvidia 455.45.01 Hash 96.62 MH Temp 56° rpm. 60% Power Limit 225 W Core +150 Micron Mem HiveOs 1760 . Windows +880 Watts 225 No problem. If we force the temperature to 100º, with my parameters and 96mh. It goes down to 80 mh. If it goes below 98º, the hash goes back up to 96mh. And so on. You had to lower the fans 30% and raise the power to get to 100º. Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on February 01, 2021, 04:53:23 PM @Th00ber
Its with the pill. 100 Watt for me is the sweet spot. Title: Re: RTX 3080 hashrate drop list Post by: ShinyGG on February 08, 2021, 02:48:05 PM Received an Aorus Extreme 3080 - it throttles if it goes above 53-55C, dropping as low as 65mhs, but generally floating around 70mhs. Setting fans at 100% and opening the window helps to bring it back up to 87-95mhs. Generally avoid this card, despite it being the top tier card from Gigabyte. They're all terrible for mining it seems. Mind you, I run on VERY conservative +800mem OC.
The 4 MSI Suprim Xs I have are OK. 8 GameRocks are most consistent, albeit they run hotter than most. Title: Re: RTX 3080 hashrate drop list Post by: rdluffy on February 10, 2021, 11:55:53 AM I was able to buy a 3080 in a few seconds before solds out, but then I realize that is 3080 Gaming X Trio 10g :D :D :D
The only solution is to modify the bios to Suprim X? Anyone tried another solution? Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on February 11, 2021, 04:35:06 AM Go watercooling.
Title: Re: RTX 3080 hashrate drop list Post by: Pistolas on February 22, 2021, 03:42:15 PM MSI 3080 Suprim X Thermal Throttling here, unfortunately!
Started ok, after two weeks it started slowly decreasing the hashrate. On HIVEOS Before: FAN SPEED - 95% ( doesn't go higher) Clocks: -500, 2725 memory, 250 PL Core temp: 42°c - 99.9 mh/s. Now: 42° c - 96.5 mh/s! Same settings. Any advice? Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on February 22, 2021, 05:43:09 PM Read the thread, check ram temp.
Title: Re: RTX 3080 hashrate drop list Post by: geniium on February 24, 2021, 11:39:15 AM With a EVGA XC3 Ultra Gaming, as soon as I lower the watt limit, the hashrate drops.
Currently the best I could get is ~ 96 MH with HiveOS via the following settings: -200 Core Clock +1800 Memory Clock Power Limit 300W I wonder why as soon as I put the same settings or different ones with a lower wattage, it plunge. Any idea why or how fix this? EDIT: and is this thermal throttling? Title: Re: RTX 3080 hashrate drop list Post by: alucard20724 on February 24, 2021, 02:45:12 PM With a EVGA XC3 Ultra Gaming, as soon as I lower the watt limit, the hashrate drops. Currently the best I could get is ~ 96 MH with HiveOS via the following settings: -200 Core Clock +1800 Memory Clock Power Limit 300W I wonder why as soon as I put the same settings or different ones with a lower wattage, it plunge. Any idea why or how fix this? EDIT: and is this thermal throttling? No.. it's not thermal throttled if you are doing 96 MH what are the fans running at? what are the temps?... if the fans are running low, and temps are high, then it could be thermal throttling. also try and lower the power... mine run about 220watts with fans @75% +1050 mem clock and power set to @60% in AB and do @97 mhash Title: Re: RTX 3080 hashrate drop list Post by: Metroid on February 24, 2021, 02:48:52 PM +1800 Memory Clock That is dangerous, should consider it lower than +1200 to be safe 24/7. Title: Re: RTX 3080 hashrate drop list Post by: adiemus123 on February 24, 2021, 03:47:37 PM With a EVGA XC3 Ultra Gaming, as soon as I lower the watt limit, the hashrate drops. Currently the best I could get is ~ 96 MH with HiveOS via the following settings: -200 Core Clock +1800 Memory Clock Power Limit 300W I wonder why as soon as I put the same settings or different ones with a lower wattage, it plunge. Any idea why or how fix this? EDIT: and is this thermal throttling? damn thats fucked up bro im doing 92mh/s with 208w 37c temp Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on February 26, 2021, 04:29:16 AM With a EVGA XC3 Ultra Gaming, as soon as I lower the watt limit, the hashrate drops. Currently the best I could get is ~ 96 MH with HiveOS via the following settings: -200 Core Clock +1800 Memory Clock Power Limit 300W I wonder why as soon as I put the same settings or different ones with a lower wattage, it plunge. Any idea why or how fix this? EDIT: and is this thermal throttling? No.. it's not thermal throttled if you are doing 96 MH what are the fans running at? what are the temps?... if the fans are running low, and temps are high, then it could be thermal throttling. also try and lower the power... mine run about 220watts with fans @75% +1050 mem clock and power set to @60% in AB and do @97 mhash Dam those are some good stats . I have 4 running 60PL amd 1300+ mem @100mhs. Doubt i’ll stay at 97 if i was to drop the mem at 1050 . If u have wardware info could u check the mem temp ? I’d be curious to see what temps u have with these settings . Title: Re: RTX 3080 hashrate drop list Post by: zorachus99 on February 26, 2021, 01:34:22 PM EVGA FTW ULTRA 3080
MSI Afterburner: 61% power, -100 core, +950 Mem (1000+ mem causes crash) Phoenix Miner: 97Mh Temp Target 62C Power Draw 230W Fan Averages 50%, ambient is 70F. Title: Re: RTX 3080 hashrate drop list Post by: fenomenyaa on February 26, 2021, 05:36:44 PM Aurus Master (thermal pad moded) without mod thorttle ???
Hash 99.12 MH Temp core 55° mem 108° rpm. 90% Core 0 samsung Mem Windows +1200 Watts 221w Title: Re: RTX 3080 hashrate drop list Post by: fenomenyaa on February 26, 2021, 05:44:58 PM Gigabyte Aurus Master 3080 Backplate 3mm(double 1.5mm) memory 1.5mm ordinary pad. 6mwk
https://i.hizliresim.com/nw1xyh.jpg (https://hizliresim.com/nw1xyh) https://i.hizliresim.com/kwricU.jpg (https://hizliresim.com/kwricU) Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on February 27, 2021, 03:22:42 AM Aurus Master (thermal pad moded) without mod thorttle ??? Hash 99.12 MH Temp core 55° mem 108° rpm. 90% Core 0 samsung Mem Windows +1200 Watts 221w Even with thermal pads it hits 108 ? Did u bother getting good quality thermal pads or just got random stuff ? Title: Re: RTX 3080 hashrate drop list Post by: Erpelusas on February 27, 2021, 06:48:56 PM MSI 3080 Suprim X Thermal Throttling here, unfortunately! Started ok, after two weeks it started slowly decreasing the hashrate. On HIVEOS Before: FAN SPEED - 95% ( doesn't go higher) Clocks: -500, 2725 memory, 250 PL Core temp: 42°c - 99.9 mh/s. Now: 42° c - 96.5 mh/s! Same settings. Any advice? Advice. Core 0, Memories to 1750 (hiveos). Power limit 220W. 94/96mh. For 5 or 6 mh more ... it is not worth stressing the memories. Title: Re: RTX 3080 hashrate drop list Post by: CryptoTr1gger on February 28, 2021, 02:31:19 AM Palit GamingPro RTX 3080
All stock nothing changed, working steady almost two months with hashrate keeping at 100 MH/s range mining ETH Temps - GPU temp does not go over 48°C - GPU memory junction temp varies between 75-82°C max (keeping in mind surrounding temp was around 20-25°C) Clocks Core: 0 / Memory: +1250 / Power: 75% Mining: Hashrate: 101+ MH/s T-rex, nicehash, phoenix... various pools https://ibb.co/fv72WjJ I must say im very happy with performance and cooling of my palit card, pleasantly surprised Title: Re: RTX 3080 hashrate drop list Post by: Erpelusas on March 05, 2021, 05:58:33 PM Gigabyte Aorus Master
206W Mem 1750 Core 0 PL 220 Cooler 90% Hash 89.7 System hiveos Drivers 455.45.01 Thermal throttling or bios coating. Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on March 05, 2021, 06:31:09 PM It would help, when all posters tell their VRAM temperature and tell
if they have extra fans blowing on the card. Title: Re: RTX 3080 hashrate drop list Post by: th00ber on March 05, 2021, 07:41:27 PM 3080 and 3090 need fresh air on the backplate.
Add some fan to blow the backplate, it is simple and will really help I do this on my 3090. If not it throttle to 90 Mh/s after some minutes, but with backplate cooler, I run at steady 112 MH/s for 295W Title: Re: RTX 3080 hashrate drop list Post by: philipma1957 on March 06, 2021, 04:09:09 AM MSI 3080 Suprim X Thermal Throttling here, unfortunately! Started ok, after two weeks it started slowly decreasing the hashrate. On HIVEOS Before: FAN SPEED - 95% ( doesn't go higher) Clocks: -500, 2725 memory, 250 PL Core temp: 42°c - 99.9 mh/s. Now: 42° c - 96.5 mh/s! Same settings. Any advice? you are killing a good piece of gear. you overclocked the ram bigly you set the power too high and you run the fans too high. the chances are pretty good you permanently hurt your ram. set the fans to 80% set the core to -300 set the ram to 1400 set the power to 230 and hope you did not hurt your ram permanently. Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on March 07, 2021, 05:01:16 AM 3080 and 3090 need fresh air on the backplate. Add some fan to blow the backplate, it is simple and will really help I do this on my 3090. If not it throttle to 90 Mh/s after some minutes, but with backplate cooler, I run at steady 112 MH/s for 295W Even when doing that the memory still runs at +95C on the 3080’s . I had the room at 18C , cards running at 35C and memory was still reaching 90-95 depending on the card . I have a fan blowing on the backplate for all the cards Title: Re: RTX 3080 hashrate drop list Post by: edufrikuto on March 08, 2021, 12:35:49 AM EVGA XC3 ULTRA GAMING, getting 102 MH/s when not using the monitor, no throttling. Fans at 60%, +1500 memory, -200 GPU, 70 PL @ ~240W. Had a Gigabyte Gaming OC before; was thermal throttling with PL 60, was pulling between 85-91 MH/s. Glad to be rid of it. I tall depends on the backplate and location of thermal pads, if they are good the memory will not throttle! I can get with lolMiner 100Mhs with less that 240W in my Gigabyte ... But I made the Thermal Pads not only in back plate also I replace the original and I take out the large connector to give some extra ventilation... and it works greats... Now I have at 96Mhs at 217W... I prefer to save that 20W for 4 Mhs... So gigabyte gaming of is fixable by thermal pad replacement? Did you use 3mm or 2mm? I can't find 3mm anywhere Thanks Title: Re: RTX 3080 hashrate drop list Post by: SuperAndroid2011 on March 14, 2021, 05:15:41 PM EVGA XC3 ULTRA GAMING, getting 102 MH/s when not using the monitor, no throttling. Fans at 60%, +1500 memory, -200 GPU, 70 PL @ ~240W. Had a Gigabyte Gaming OC before; was thermal throttling with PL 60, was pulling between 85-91 MH/s. Glad to be rid of it. I tall depends on the backplate and location of thermal pads, if they are good the memory will not throttle! I can get with lolMiner 100Mhs with less that 240W in my Gigabyte ... But I made the Thermal Pads not only in back plate also I replace the original and I take out the large connector to give some extra ventilation... and it works greats... Now I have at 96Mhs at 217W... I prefer to save that 20W for 4 Mhs... So gigabyte gaming of is fixable by thermal pad replacement? Did you use 3mm or 2mm? I can't find 3mm anywhere Thanks I did only find the 2mm (Thermalright Thermal Pad 12.8 W/mK, 85x45x2mm). I got good results, 20 degress celsius less on Memory Junction. Core and GPU hotspot increased 6 degrees each, maybe more heat from memories on copper, or bad thermal paste reapply. I forgot to try the remaining piece of thermal pad on backplate, not sure if 2mm would fit in the gap (and not fall). I think if with precise cutting you can use a single thermal pad sheet on both front and backplate (if 2mm fits backplate). But be warned, you'll lose your warranty and Gigabyte Gaming OC fan connectors are a hell of a job to remove them, almost broke 2 of the 3, I almost gave up... I'm certain that if for any reason I rma this card, it'll be rejected. For curiosity, my Gigabyte had much less grease/oil from original pads than what I saw in some videos... Title: Re: RTX 3080 hashrate drop list Post by: Erpelusas on March 17, 2021, 08:05:58 AM EVGA GeForce RTX 3080 FTW3 ULTRA GAMING.
Hiveos 5.4.80. Drivers Nvidia 460.56. Miner: T-Rex. 0.19.12-cuda111 Hash 92.21 Core 45 Cooler set 70% Powerlimit 220W Memory 1250 (windows +650) OC Core 0 Windows 10. Drivers nvidia 461.92 Miner Lolminer. Hash 92.21 Core 45 Cooler set 70% Powerlimit 227W Memory +650 OC core 0 Average temperature of memories. 82º checked with HWINFO64 and CpuZ. Same config but OC Memory +750 hiveos / +1500 windows . Hash 95mh. Average temperature of memories 84º Room temperature 17/20º. I know it can give 100 mh. But for 5mh I'm not interested in stressing the memories It is a very expensive chart to play. https://i.ibb.co/LC17J0X/photo-2021-03-17-09-12-19.jpg Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on March 17, 2021, 09:00:57 AM I got my EKWB Blocks for the Supreme X yesterday.
Just want to inform all that the pads might be too thin. 1. GPU Asus TUF 62 degrees (watercooled) 2. GPU MSI Supreme X 96 degrees (watercooled) and still slowly rising. Just did a second try and it didnt change the temp. But i recognized nearly no imprint of the rams in the pads. I should have 1.5mm here for a 3. try. EKWB sends only 1mm pads. So after mounting of the block, check the ram temp with hwinfo.... Edit: Changing the lonely ram pad at the 16x PCI-E from 1mm to 1.5mm dropped the ram temp by 30 degrees. Sounds unbelievable but is true... Edit: RAM +1149 = 99 MH/s RAM +1200 = 99.4 MH/s RAM +1300 > 100 MH/s Core 1275 MHz ( too lazy to drop it more) VCore 0,731 Power 234 Watt Ram Temp 78 degress Phoenix miner Goal achieved ;D Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on March 18, 2021, 04:46:01 AM I got my EKWB Blocks for the Supreme X yesterday. Just want to inform all that the pads might be too thin. 1. GPU Asus TUF 62 degrees (watercooled) 2. GPU MSI Supreme X 96 degrees (watercooled) and still slowly rising. Just did a second try and it didnt change the temp. But i recognized nearly no imprint of the rams in the pads. I should have 1.5mm here for a 3. try. EKWB sends only 1mm pads. So after mounting of the block, check the ram temp with hwinfo.... Edit: Changing the lonely ram pad at the 16x PCI-E from 1mm to 1.5mm dropped the ram temp by 30 degrees. Sounds unbelievable but is true... Edit: RAM +1149 = 99 MH/s RAM +1200 = 99.4 MH/s RAM +1300 > 100 MH/s Core 1275 MHz ( too lazy to drop it more) VCore 0,731 Power 234 Watt Ram Temp 78 degress Phoenix miner Goal achieved ;D Would be interesting to know if keeping it air cooled while changing the pad at the pcie16 spot would cool it the same . I’m assuming i’d have to remove the backplate which would void my warranty ? Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on March 18, 2021, 03:51:23 PM You have to remove the heatsink, not only the backplate.
Looks like the next supreme x has got the same problem with the ekwb cooler. All 1mm pads used - temp much higher than expected. Hope its the same spot. Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on March 18, 2021, 05:56:35 PM 3080 eth max hashrate with exchange of the bespoken ram pad.
CPU is a 5800x, so the monitor is attached to the first gpu, lowering the hash a bit. Highest ram temp after 2h 80 degrees. https://s8.directupload.net/images/210318/temp/949q2kmz.jpg (https://www.directupload.net/file/d/6126/949q2kmz_jpg.htm) Title: Re: RTX 3080 hashrate drop list Post by: Commie on March 18, 2021, 09:28:16 PM Asus TUF 3080 OC
Absolute values as shown in Awesome Miner: PL 70%, didn't edit voltage curve 238W Core 1050-1125 MHz Mem 10551 MHz Core temp 51 Mem temp unknown (Linux. But no throttling so far) Fan 80% Extra fans on the rig Copper radiators on the backplate over vram locations Outside temp 27 - 36C 100.34 MH/s Title: Re: RTX 3080 hashrate drop list Post by: Commie on March 18, 2021, 09:30:07 PM Zotac Trinity 3080
Absolute values as shown in Awesome Miner: PL 70%, didn't edit voltage curve 224W Core 1080-1125 MHz Mem 10551 MHz Core temp 45 Mem temp unknown (Linux. But no throttling so far) Fan 75% Extra fans on the rig Outside temp 27 - 36C 100.37 MH/s Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on March 19, 2021, 03:24:28 AM You have to remove the heatsink, not only the backplate. Looks like the next supreme x has got the same problem with the ekwb cooler. All 1mm pads used - temp much higher than expected. Hope its the same spot. I meant if i wanted to only change the pad on the pcie16 unless u mean we need to remove heatsink and backplate just to swap the pads ? Since with the watercool ur still having same temps then i’m thinking keeping it stock with only changing the pads would reduce the mem temps as much as u did. Just don’t want to void my warranty . Is there no way to remove the backplate without msi finding out ? Title: Re: RTX 3080 hashrate drop list Post by: jcc39 on March 19, 2021, 03:49:18 AM MSI Ventus 3x 3080
RaveOS running of 4gb flash drive 240W Core 1425 Mem 10802 MHz Core temp 45C Mem temp unknown (Linux. But no throttling so far) Fan 63% In 4U case with 3 front fans Completely stock card no modifications Outside temp 7C 102.84 MH/s I had it up to 103.5mh running 24hrs straight with no errors, just started to tune for efficiency. I think this card does pretty darn good considering it supposedly has the worst thermals of any 3080 and even has the plastic backplate. https://imgur.com/a/evKf0k6 Title: Re: RTX 3080 hashrate drop list Post by: Erpelusas on March 19, 2021, 08:03:54 AM I got my EKWB Blocks for the Supreme X yesterday. Just want to inform all that the pads might be too thin. 1. GPU Asus TUF 62 degrees (watercooled) 2. GPU MSI Supreme X 96 degrees (watercooled) and still slowly rising. Just did a second try and it didnt change the temp. But i recognized nearly no imprint of the rams in the pads. I should have 1.5mm here for a 3. try. EKWB sends only 1mm pads. So after mounting of the block, check the ram temp with hwinfo.... Edit: Changing the lonely ram pad at the 16x PCI-E from 1mm to 1.5mm dropped the ram temp by 30 degrees. Sounds unbelievable but is true... Edit: RAM +1149 = 99 MH/s RAM +1200 = 99.4 MH/s RAM +1300 > 100 MH/s Core 1275 MHz ( too lazy to drop it more) VCore 0,731 Power 234 Watt Ram Temp 78 degress Phoenix miner Goal achieved ;D Phoenixminer, inflate the hash. You don't have a real hash. Title: Re: RTX 3080 hashrate drop list Post by: logicalray77 on March 19, 2021, 10:32:47 AM EVGA RTX 3080 FTW3
T-rex - Latest PL = 60% Memory = +500 Fan = 65% Watts = 227 Core = -200 Core temp = 53 Memory temp = 89 Ambient temp = 24 AVG Mhs = 92.20 Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on March 19, 2021, 05:39:18 PM I got my EKWB Blocks for the Supreme X yesterday. Just want to inform all that the pads might be too thin. 1. GPU Asus TUF 62 degrees (watercooled) 2. GPU MSI Supreme X 96 degrees (watercooled) and still slowly rising. Just did a second try and it didnt change the temp. But i recognized nearly no imprint of the rams in the pads. I should have 1.5mm here for a 3. try. EKWB sends only 1mm pads. So after mounting of the block, check the ram temp with hwinfo.... Edit: Changing the lonely ram pad at the 16x PCI-E from 1mm to 1.5mm dropped the ram temp by 30 degrees. Sounds unbelievable but is true... Edit: RAM +1149 = 99 MH/s RAM +1200 = 99.4 MH/s RAM +1300 > 100 MH/s Core 1275 MHz ( too lazy to drop it more) VCore 0,731 Power 234 Watt Ram Temp 78 degress Phoenix miner Goal achieved ;D Phoenixminer, inflate the hash. You don't have a real hash. I use phoenixminer and my hash is the same as reported on the pool side . How u explain that if phoenixminer inflates the hashrate . Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on March 19, 2021, 07:18:06 PM Anybody knows that phoenix miner is a trusted miner.
Its well done and updated often. Nothing more to say.... Title: Re: RTX 3080 hashrate drop list Post by: jgonzi on March 19, 2021, 09:24:39 PM I got my EKWB Blocks for the Supreme X yesterday. Just want to inform all that the pads might be too thin. 1. GPU Asus TUF 62 degrees (watercooled) 2. GPU MSI Supreme X 96 degrees (watercooled) and still slowly rising. Just did a second try and it didnt change the temp. But i recognized nearly no imprint of the rams in the pads. I should have 1.5mm here for a 3. try. EKWB sends only 1mm pads. So after mounting of the block, check the ram temp with hwinfo.... Edit: Changing the lonely ram pad at the 16x PCI-E from 1mm to 1.5mm dropped the ram temp by 30 degrees. Sounds unbelievable but is true... Edit: RAM +1149 = 99 MH/s RAM +1200 = 99.4 MH/s RAM +1300 > 100 MH/s Core 1275 MHz ( too lazy to drop it more) VCore 0,731 Power 234 Watt Ram Temp 78 degress Phoenix miner Goal achieved ;D Phoenixminer, inflate the hash. You don't have a real hash. I use phoenixminer and my hash is the same as reported on the pool side . How u explain that if phoenixminer inflates the hashrate . The pool hash must be the same of course but the pool with the hash show it quiite higher around a 3% Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on March 20, 2021, 01:11:17 PM I got my EKWB Blocks for the Supreme X yesterday. Just want to inform all that the pads might be too thin. 1. GPU Asus TUF 62 degrees (watercooled) 2. GPU MSI Supreme X 96 degrees (watercooled) and still slowly rising. Just did a second try and it didnt change the temp. But i recognized nearly no imprint of the rams in the pads. I should have 1.5mm here for a 3. try. EKWB sends only 1mm pads. So after mounting of the block, check the ram temp with hwinfo.... Edit: Changing the lonely ram pad at the 16x PCI-E from 1mm to 1.5mm dropped the ram temp by 30 degrees. Sounds unbelievable but is true... Edit: RAM +1149 = 99 MH/s RAM +1200 = 99.4 MH/s RAM +1300 > 100 MH/s Core 1275 MHz ( too lazy to drop it more) VCore 0,731 Power 234 Watt Ram Temp 78 degress Phoenix miner Goal achieved ;D Phoenixminer, inflate the hash. You don't have a real hash. I use phoenixminer and my hash is the same as reported on the pool side . How u explain that if phoenixminer inflates the hashrate . The pool hash must be the same of course but the pool with the hash show it quiite higher around a 3% I don’t get what u said Title: Re: RTX 3080 hashrate drop list Post by: BitBlitzer on March 20, 2021, 02:06:51 PM https://github.com/Kerney666/trm-ethash-miner-tester (https://github.com/Kerney666/trm-ethash-miner-tester)
Phoenix miner inflates hashrate by about 3%. Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on March 21, 2021, 12:17:39 AM https://github.com/Kerney666/trm-ethash-miner-tester (https://github.com/Kerney666/trm-ethash-miner-tester) Phoenix miner inflates hashrate by about 3%. So 3080’s don’t actually do 100mhs ? If pheonix miners inflated the hashrate wouldnt it be reported 3% lower on the pool side ? Title: Re: RTX 3080 hashrate drop list Post by: Erpelusas on March 25, 2021, 07:31:17 AM Anybody knows that phoenix miner is a trusted miner. Its well done and updated often. Nothing more to say.... Nobody disputes that it is good and trustworthy. That is why I have been using it for the last 3 years. Its 0.65% fee and its constant updating have been the key to its success. But that's not to say that it doesn't inflate the hash. And that did not matter to us until they have come out miner as good as phoenixminer and but without inflation. That does not mean that it is bad, far from it .. But that it inflates is a fact. It is as simple as using other miners and doing checks. That there is no problem as long as one takes into account that inflation. Many people are interested in paying 0.65% even if they have to see an unreal hash. Title: Re: RTX 3080 hashrate drop list Post by: Walrusbonzo on March 25, 2021, 09:26:03 AM https://github.com/Kerney666/trm-ethash-miner-tester (https://github.com/Kerney666/trm-ethash-miner-tester) Phoenix miner inflates hashrate by about 3%. So 3080’s don’t actually do 100mhs ? If pheonix miners inflated the hashrate wouldnt it be reported 3% lower on the pool side ? 3080s can still do 100mh/s+ without using Phoenix, it's a bit of a silicon lottery. I use Trex miner. 5 x 3080s. 2 do 102.8mh/s, 1 x 100.9mh/s, 1 x 98.8mh/s, 1 x 96mh/s In fact, I had to stop using Phoenix miner for my 3080 rig as I got way too many stale shares. Title: Re: RTX 3080 hashrate drop list Post by: dragonmike on March 26, 2021, 05:18:25 PM https://github.com/Kerney666/trm-ethash-miner-tester (https://github.com/Kerney666/trm-ethash-miner-tester) Phoenix miner inflates hashrate by about 3%. So 3080’s don’t actually do 100mhs ? If pheonix miners inflated the hashrate wouldnt it be reported 3% lower on the pool side ? 3080s can still do 100mh/s+ without using Phoenix, it's a bit of a silicon lottery. I use Trex miner. 5 x 3080s. 2 do 102.8mh/s, 1 x 100.9mh/s, 1 x 98.8mh/s, 1 x 96mh/s In fact, I had to stop using Phoenix miner for my 3080 rig as I got way too many stale shares. Title: Re: RTX 3080 hashrate drop list Post by: P00P135 on March 26, 2021, 07:55:20 PM Zotac Trinity
HiveOS N460.32.03 drivers 215w PL -200 Core +2400 Mem 65c 70% Fanspeed 99.38 Mh/s Title: Re: RTX 3080 hashrate drop list Post by: sakmsb on March 27, 2021, 08:22:48 PM Zotac Trinity NO thermal throttling on trinity?HiveOS N460.32.03 drivers 215w PL -200 Core +2400 Mem 65c 70% Fanspeed 99.38 Mh/s Title: Re: RTX 3080 hashrate drop list Post by: P00P135 on March 27, 2021, 08:40:01 PM Zotac Trinity NO thermal throttling on trinity?HiveOS N460.32.03 drivers 215w PL -200 Core +2400 Mem 65c 70% Fanspeed 99.38 Mh/s It throttled when it reached 70c core temps. I can't monitor mem temps on hiveOS. Also it can reach 101Mh/s @230w but didn't seem worth. Title: Re: RTX 3080 hashrate drop list Post by: Walrusbonzo on March 28, 2021, 10:27:44 AM https://github.com/Kerney666/trm-ethash-miner-tester (https://github.com/Kerney666/trm-ethash-miner-tester) Phoenix miner inflates hashrate by about 3%. So 3080’s don’t actually do 100mhs ? If pheonix miners inflated the hashrate wouldnt it be reported 3% lower on the pool side ? 3080s can still do 100mh/s+ without using Phoenix, it's a bit of a silicon lottery. I use Trex miner. 5 x 3080s. 2 do 102.8mh/s, 1 x 100.9mh/s, 1 x 98.8mh/s, 1 x 96mh/s In fact, I had to stop using Phoenix miner for my 3080 rig as I got way too many stale shares. Hopefully this suits your needs. Included the memory temps for the Shitabyte Gaming OC cards ;) The "hot" one is the MSI Suprim. https://imgur.com/a/Bjua0cL (https://imgur.com/a/Bjua0cL) Title: Re: RTX 3080 hashrate drop list Post by: agente on March 28, 2021, 05:02:39 PM https://github.com/Kerney666/trm-ethash-miner-tester (https://github.com/Kerney666/trm-ethash-miner-tester) Phoenix miner inflates hashrate by about 3%. So 3080’s don’t actually do 100mhs ? If pheonix miners inflated the hashrate wouldnt it be reported 3% lower on the pool side ? 3080s can still do 100mh/s+ without using Phoenix, it's a bit of a silicon lottery. I use Trex miner. 5 x 3080s. 2 do 102.8mh/s, 1 x 100.9mh/s, 1 x 98.8mh/s, 1 x 96mh/s In fact, I had to stop using Phoenix miner for my 3080 rig as I got way too many stale shares. Hopefully this suits your needs. Included the memory temps for the Shitabyte Gaming OC cards ;) The "hot" one is the MSI Suprim. https://imgur.com/a/Bjua0cL (https://imgur.com/a/Bjua0cL) Can you share your settings? 73/76c junction temp is really impressive. environment temp? Gigabyte version? Title: Re: RTX 3080 hashrate drop list Post by: Walrusbonzo on March 28, 2021, 05:49:18 PM https://github.com/Kerney666/trm-ethash-miner-tester (https://github.com/Kerney666/trm-ethash-miner-tester) Phoenix miner inflates hashrate by about 3%. So 3080’s don’t actually do 100mhs ? If pheonix miners inflated the hashrate wouldnt it be reported 3% lower on the pool side ? 3080s can still do 100mh/s+ without using Phoenix, it's a bit of a silicon lottery. I use Trex miner. 5 x 3080s. 2 do 102.8mh/s, 1 x 100.9mh/s, 1 x 98.8mh/s, 1 x 96mh/s In fact, I had to stop using Phoenix miner for my 3080 rig as I got way too many stale shares. Hopefully this suits your needs. Included the memory temps for the Shitabyte Gaming OC cards ;) The "hot" one is the MSI Suprim. https://imgur.com/a/Bjua0cL (https://imgur.com/a/Bjua0cL) Can you share your settings? 73/76c junction temp is really impressive. environment temp? Gigabyte version? Ambient temp is 22c. All the Gigabyte cards are modified with new thermal pads front and rear(between the PCB and backplate). Three of the Gigabyte cards are Gaming OC, One is a Vision. No power limit set, all have vcore locked at 725mv and using the stock core frequency "curve" for the card. I.E. there is no core frequency offset. They all vary on core clock due to silicon lottery. The Gaming OC cards, 1 does +1175mhz memory offset(One of the 222w cards in the image), 1 does +800(226w, this card lost silicon lottery, it's really inefficient compared to the other cards I have), the last does +550 on the memory, 209w card, seems it has a power efficient core but the memory sucks. The Vision card also does +1175(222w card) The Suprim is the most energy efficient card. I haven't modified it like the Gigabyte cards, so the memory temps are much higher and therefore I think what is holding back my memory overclock of +1000mhz. Title: Re: RTX 3080 hashrate drop list Post by: agente on March 28, 2021, 06:03:16 PM Ambient temp is 22c. All the Gigabyte cards are modified with new thermal pads front and rear(between the PCB and backplate). Brand used? 2mm, 3mm or a mix? Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on March 29, 2021, 03:46:12 AM https://github.com/Kerney666/trm-ethash-miner-tester (https://github.com/Kerney666/trm-ethash-miner-tester) Phoenix miner inflates hashrate by about 3%. So 3080’s don’t actually do 100mhs ? If pheonix miners inflated the hashrate wouldnt it be reported 3% lower on the pool side ? 3080s can still do 100mh/s+ without using Phoenix, it's a bit of a silicon lottery. I use Trex miner. 5 x 3080s. 2 do 102.8mh/s, 1 x 100.9mh/s, 1 x 98.8mh/s, 1 x 96mh/s In fact, I had to stop using Phoenix miner for my 3080 rig as I got way too many stale shares. Hopefully this suits your needs. Included the memory temps for the Shitabyte Gaming OC cards ;) The "hot" one is the MSI Suprim. https://imgur.com/a/Bjua0cL (https://imgur.com/a/Bjua0cL) Can you share your settings? 73/76c junction temp is really impressive. environment temp? Gigabyte version? Ambient temp is 22c. All the Gigabyte cards are modified with new thermal pads front and rear(between the PCB and backplate). Three of the Gigabyte cards are Gaming OC, One is a Vision. No power limit set, all have vcore locked at 725mv and using the stock core frequency "curve" for the card. I.E. there is no core frequency offset. They all vary on core clock due to silicon lottery. The Gaming OC cards, 1 does +1175mhz memory offset(One of the 222w cards in the image), 1 does +800(226w, this card lost silicon lottery, it's really inefficient compared to the other cards I have), the last does +550 on the memory, 209w card, seems it has a power efficient core but the memory sucks. The Vision card also does +1175(222w card) The Suprim is the most energy efficient card. I haven't modified it like the Gigabyte cards, so the memory temps are much higher and therefore I think what is holding back my memory overclock of +1000mhz. I have 4 suprim X and one trio X on suprim fw. Today one of the suprim X hit 110 junction temp and is now throttled at 94-96 mh. The others are all running at 99 with junction temps between 98 and 104 . I’m surprised my trio X did not hit throttle before one suprim X . Is my only option now to remove the backplate and change the thermal pads ? Would msi know i opened the back plate ? Title: Re: RTX 3080 hashrate drop list Post by: 1337leet on March 29, 2021, 08:19:09 AM Anyone got info for the Aorus Master 3080?
Does it thermal throtteling or is it good? Title: Re: RTX 3080 hashrate drop list Post by: 1337leet on March 29, 2021, 08:35:01 AM I got the Gigabyte AORUS GeForce RTX 3080 Master and it's working like a beast 97.5 MH 24/7 240w Still 97? Memory temperatures okay? Title: Re: RTX 3080 hashrate drop list Post by: Walrusbonzo on March 29, 2021, 03:59:59 PM Ambient temp is 22c. All the Gigabyte cards are modified with new thermal pads front and rear(between the PCB and backplate). Brand used? 2mm, 3mm or a mix? I bought a sheet of this and cut it up accordingly. https://uk.rs-online.com/web/p/thermal-pads/1745712/ Title: Re: RTX 3080 hashrate drop list Post by: Walrusbonzo on March 29, 2021, 04:01:23 PM https://github.com/Kerney666/trm-ethash-miner-tester (https://github.com/Kerney666/trm-ethash-miner-tester) Phoenix miner inflates hashrate by about 3%. So 3080’s don’t actually do 100mhs ? If pheonix miners inflated the hashrate wouldnt it be reported 3% lower on the pool side ? 3080s can still do 100mh/s+ without using Phoenix, it's a bit of a silicon lottery. I use Trex miner. 5 x 3080s. 2 do 102.8mh/s, 1 x 100.9mh/s, 1 x 98.8mh/s, 1 x 96mh/s In fact, I had to stop using Phoenix miner for my 3080 rig as I got way too many stale shares. Hopefully this suits your needs. Included the memory temps for the Shitabyte Gaming OC cards ;) The "hot" one is the MSI Suprim. https://imgur.com/a/Bjua0cL (https://imgur.com/a/Bjua0cL) Can you share your settings? 73/76c junction temp is really impressive. environment temp? Gigabyte version? Ambient temp is 22c. All the Gigabyte cards are modified with new thermal pads front and rear(between the PCB and backplate). Three of the Gigabyte cards are Gaming OC, One is a Vision. No power limit set, all have vcore locked at 725mv and using the stock core frequency "curve" for the card. I.E. there is no core frequency offset. They all vary on core clock due to silicon lottery. The Gaming OC cards, 1 does +1175mhz memory offset(One of the 222w cards in the image), 1 does +800(226w, this card lost silicon lottery, it's really inefficient compared to the other cards I have), the last does +550 on the memory, 209w card, seems it has a power efficient core but the memory sucks. The Vision card also does +1175(222w card) The Suprim is the most energy efficient card. I haven't modified it like the Gigabyte cards, so the memory temps are much higher and therefore I think what is holding back my memory overclock of +1000mhz. I have 4 suprim X and one trio X on suprim fw. Today one of the suprim X hit 110 junction temp and is now throttled at 94-96 mh. The others are all running at 99 with junction temps between 98 and 104 . I’m surprised my trio X did not hit throttle before one suprim X . Is my only option now to remove the backplate and change the thermal pads ? Would msi know i opened the back plate ? To stop thermal throttling you would need to change pads, yes... MSI would find out when they take it apart unless you put back all the original pads. Then you might get away with it. Title: Re: RTX 3080 hashrate drop list Post by: Erpelusas on March 29, 2021, 06:39:51 PM Could someone comment if the EVGA GeForce RTX 3080 "XC3 BLACK" GAMING 10GB has thermal throttling?
Title: Re: RTX 3080 hashrate drop list Post by: Miningminds on March 31, 2021, 08:52:17 AM Would like to share my results with the community, I have 2 msi 3080 ventus 3x running for 3 months now.
The first one settings: 69 power limit -150 core +625 memory 80 fan speed and it does aprox: 93,7 mh/s with a 220w consumption The second one: 69 power limit -150 core +734 memory 80 fan speed and it does aprox: 94,8 mh/s with a 220w consumption I would like to comment that both heats up to 110 degrees junction temp with 26º environment, and some times even going up to 112 so decided to modify the first one with newer thermal pads and also thermal paste. However I have to tell that the cards even running all time at 110º it never suffered from throotling. The final results are quite impressive for me, as the tjunction memory reduced from 110 degrees in average to 90 constantly. If someone is interested in improving the temps in this card model, I bought these pads: Thermal Grizzly Thermopad Minus Pad 8 (2 mm) and One enjoy Thermalright Thermal Pad 12.8 W/MK, 85x45x1.5mm Nevertheless, I tried with the modified card to overlock a bit more until +800 memory and after some minutes, the card hangs out and stop running, so I suppose that silicon lottery bad for me and I can't recommend this model for anyone. Title: Re: RTX 3080 hashrate drop list Post by: 666mrga999 on March 31, 2021, 09:14:08 AM My cards have been mining fine for almost 50 days non stop, 3080s are the way
image: https://ibb.co/h1Db7JZ Title: Re: RTX 3080 hashrate drop list Post by: Miningminds on March 31, 2021, 11:51:41 AM My cards have been mining fine for almost 50 days non stop, 3080s are the way image: https://ibb.co/h1Db7JZ card #3 crazy efficiency, almost like my best 3060 ti Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on March 31, 2021, 11:58:54 AM To stop thermal throttling you would need to change pads, yes... MSI would find out when they take it apart unless you put back all the original pads. Then you might get away with it. [/quote] I might just try that and put back the thermal pads how they where if ever i need to RMA. U sure theres no other way they can tell i removed the backplate ? Sucks cause i bought these cards that retail more than other brands because i didnt wanna have to deal with heating issues . Had i know i would of saved some money and get the evga xc3 ultra . Title: Re: RTX 3080 hashrate drop list Post by: Walrusbonzo on March 31, 2021, 07:26:58 PM My cards have been mining fine for almost 50 days non stop, 3080s are the way image: https://ibb.co/h1Db7JZ card #3 crazy efficiency, almost like my best 3060 ti 170w! That's insane. I'm wondering if it's a misreading it's so good. Title: Re: RTX 3080 hashrate drop list Post by: Erpelusas on April 04, 2021, 12:03:15 PM To stop thermal throttling you would need to change pads, yes... MSI would find out when they take it apart unless you put back all the original pads. Then you might get away with it. I might just try that and put back the thermal pads how they where if ever i need to RMA. U sure theres no other way they can tell i removed the backplate ? Sucks cause i bought these cards that retail more than other brands because i didnt wanna have to deal with heating issues . Had i know i would of saved some money and get the evga xc3 ultra . [/quote] The xc3 also get hot and do thermal throttling if an oc is done. Title: Re: RTX 3080 hashrate drop list Post by: 1337leet on April 04, 2021, 12:34:51 PM Some of my cards have a guarantee seal on the screws which you need to break to unscrew the backplate.
Title: Re: RTX 3080 hashrate drop list Post by: Stedre on April 05, 2021, 05:00:05 PM I've more than one
3080 Gigabyte Gaming OC PL 220, but they use only about 190W -200 +1900 42-45C 67-75MH Hive OS Linux 455.45.01 Ethminer Others are working at 220W as predefined at ~87MH. Any Ideas? Title: Re: RTX 3080 hashrate drop list Post by: fenomenyaa on April 05, 2021, 06:16:47 PM Gigabyte 3080 Gaming Thermal pad moded both side.(12.8mwk)
Hash 101.32 MH Temp core 65° mem 90° rpm. 75% Core 0 samsung Mem Windows +1350 Watts 232w Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on April 09, 2021, 11:01:50 PM Any of you guys have a 8-10% difference between effective current hashrate and current hashrate ?
I’m using pheonixminer on ethermine . Title: Re: RTX 3080 hashrate drop list Post by: Walrusbonzo on April 10, 2021, 09:03:11 AM Any of you guys have a 8-10% difference between effective current hashrate and current hashrate ? I’m using pheonixminer on ethermine . Yes, I had a lot of stale shares with pheonixminer. So I switched to Trex and the problem disappeared. I'm using Nanopool. Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on April 10, 2021, 10:03:47 PM Any of you guys have a 8-10% difference between effective current hashrate and current hashrate ? I’m using pheonixminer on ethermine . Yes, I had a lot of stale shares with pheonixminer. So I switched to Trex and the problem disappeared. I'm using Nanopool. But its odd cause my 1070 rig reports the same on all counts . The 3080’s are the ones with issues Title: Re: RTX 3080 hashrate drop list Post by: Ruso21 on April 11, 2021, 03:05:31 AM Gigabyte Aorus Xtreme - 99.5 mh no throttling with 80% fan can you share the settings? Power Limit: Core Clock: Memory Clock: Driver version: Windows or linux? Which miner? Did you put thermal pad? Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on April 12, 2021, 08:20:33 AM Alternative to ETH Mining - First test. 3080 Suprim X - Core 2000 with 0.9V
Firo (mtp) Algo Power Core RAM Hash 3GPUs Hash Firo 190 Watt 1100 10400 4200 kH/s 22 KH/s/W 564 Watt 12.60 MH/s (14$ per day) 230 Watt 1550 8750 5920 kH/s 26 KH/s/W 680 Watt 17.80 MH/s (18.3$ per day) 410 Watt 2000 10400 7600 KH/s 19 KH/s/W 1240 Watt 22.90 MH/s (25$ per day) 420 Watt 2025 8750 7700 KH/s 19 KH/s/W 1260 Watt 23.11 MH/s Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on April 12, 2021, 04:03:21 PM Any of you guys have a 8-10% difference between effective current hashrate and current hashrate ? I’m using pheonixminer on ethermine . Yes, I had a lot of stale shares with pheonixminer. So I switched to Trex and the problem disappeared. I'm using Nanopool. Tried Trex and same issue . Current hashrate keeps fluctuating but my 1070 rig is constant 100% of the time Title: Re: RTX 3080 hashrate drop list Post by: jgonzi on April 14, 2021, 06:41:26 AM Any of you guys have a 8-10% difference between effective current hashrate and current hashrate ? I’m using pheonixminer on ethermine . Yes, I had a lot of stale shares with pheonixminer. So I switched to Trex and the problem disappeared. I'm using Nanopool. Tried Trex and same issue . Current hashrate keeps fluctuating but my 1070 rig is constant 100% of the time Try lolminer with the fix clock... https://github.com/Lolliedieb/lolMiner-releases/wiki/Fix-Clock-Nvidia-for-Cuda-(English) (https://github.com/Lolliedieb/lolMiner-releases/wiki/Fix-Clock-Nvidia-for-Cuda-(English)) That could help to reduce the temperature... if stilll fluctuating... reduce the core it will also reduce the Mhs but at one point will be fix hashing. Title: Re: RTX 3080 hashrate drop list Post by: dwupack on April 19, 2021, 10:37:21 AM Hello, I also have MSI RTX3080 Gaming X and some problems with ETH hash rate (88 only).
My stock BIOS was: 94.02.42.00.FB, flashed new Supreme X from techpowerup: 94.02.42.00.F9 but still no results. No matter what I do GPU core is about 930MHz. Can You share Supreme X bios version and Afterburner settings for that card to get higher mh/s. Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on April 20, 2021, 01:36:55 PM Hello, I also have MSI RTX3080 Gaming X and some problems with ETH hash rate (88 only). My stock BIOS was: 94.02.42.00.FB, flashed new Supreme X from techpowerup: 94.02.42.00.F9 but still no results. No matter what I do GPU core is about 930MHz. Can You share Supreme X bios version and Afterburner settings for that card to get higher mh/s. Now that u flashed the suprim bios , in msi afterburner u can increase the Pl to 108. PL 108 Core curve at 1300 Memory at 1100 . With these settings u’ll hit 97-98 . If u want to hit 100 push the mem to 1300 . Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on April 20, 2021, 05:13:13 PM You dont need more power. You need well cooled ram.
My suprims doing 102.x hash with +1500 and around 225 Watt. Title: Re: RTX 3080 hashrate drop list Post by: Walrusbonzo on April 21, 2021, 07:51:45 PM Any of you guys have a 8-10% difference between effective current hashrate and current hashrate ? I’m using pheonixminer on ethermine . Yes, I had a lot of stale shares with pheonixminer. So I switched to Trex and the problem disappeared. I'm using Nanopool. But its odd cause my 1070 rig reports the same on all counts . The 3080’s are the ones with issues Same problem here, my 2080Ti, 3060Ti and 1660 were all fine with PhoenixMiner, only the 3080s had stale shares Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on April 24, 2021, 04:59:40 PM Just a info for those 3080 users:
Using Windows with AB you can max clock the ram + 1500. Using Linux you can go higher and get more hash. Getting over 103 MH/s with RAM+3200 under linux - simplemining - latest GMiner - Kernel 6 Need well cooled gpu vram. Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on April 25, 2021, 02:38:10 AM Any of you guys have a 8-10% difference between effective current hashrate and current hashrate ? I’m using pheonixminer on ethermine . Yes, I had a lot of stale shares with pheonixminer. So I switched to Trex and the problem disappeared. I'm using Nanopool. But its odd cause my 1070 rig reports the same on all counts . The 3080’s are the ones with issues Same problem here, my 2080Ti, 3060Ti and 1660 were all fine with PhoenixMiner, only the 3080s had stale shares I tried using trex but i have the same result . What are the 3080’s u have and whats their Oc settings ? Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on April 25, 2021, 02:43:39 AM You dont need more power. You need well cooled ram. My suprims doing 102.x hash with +1500 and around 225 Watt. Suprims don’t have power issues . He has a gaming trio X , those cards have a power limit issue and flashing the surprim firmware fixes that . I have a gaming trio X and i tried everything including leaving it running in 0 celcius room to make sure it’s not thermal throttling problem. I was only able to hit 98-100mhs once i flashed the surpim Os and brought up the PL to 108 . Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on April 25, 2021, 03:18:05 AM @Seph213
Thats a point. But rising the powerlevel shouldnt help this much because the 3080 dont need over 250 Watt for ETH. So i am amazed. Maybe faster VRAM settings in the BIOS? My asus tuf oc cant do more than 98.5 at 1149. Hope we can get more infos where the difference is. Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on April 25, 2021, 09:13:19 PM @Seph213 Thats a point. But rising the powerlevel shouldnt help this much because the 3080 dont need over 250 Watt for ETH. So i am amazed. Maybe faster VRAM settings in the BIOS? My asus tuf oc cant do more than 98.5 at 1149. Hope we can get more infos where the difference is. I don’t think the PL is about how much watts the card is pushing cause if u play am intensive video game like cyberpunk , you card will dish out more than 250 watts with no issues yet when u mine it refuses to go above 220. The reason ur not seeing higher output is because the coreclock throttles once u go pass +500 memory . Now my trio X with PL at 108 is pushing 98mhs at 217watts according to phoenixminer . My suprim X with PL at 60 pushes 98mhs but at 229 watts cause i raises the coreclock trying to fix the reported hashtare problem i’m having with 30 series cards . So u see i don’t think PL only affects the power being delivered , i think theres more working in the backround that i’m simply not aware of so can’t really explain . Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on April 28, 2021, 10:51:54 AM I am running the suprim x i have got at 1100 Mhz and 1500 RAM (Windows and custom voltage).
Powerlevel is at 100% but i doesnt affect the hash. Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on April 28, 2021, 12:17:22 PM I am running the suprim x i have got at 1100 Mhz and 1500 RAM (Windows and custom voltage). Powerlevel is at 100% but i doesnt affect the hash. Do you see a decent difference between reported hashrate and current hashrate ? Is he avg hashrate very close to ur reported ? Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on April 28, 2021, 02:38:31 PM I dont understand the discussion about reported in the miner and shown in the pool.
The Miner in the rig reports the hashrate of the rig and the pool calculates the hashrate out of the sended found shares. And thats always a difference. Mostly my hashrate at the pool is a bit higher than in the miner. 1%. But thats Luck etc. Simplemining: +---+-----+----+---+-----------+----------+----+-----+-----+-------------+ | ID GPU Temp Fan Speed Shares Core Mem Power Efficiency | +---+-----+----+---+-----------+----------+----+-----+-----+-------------+ | 0 3070 52 C 0 % 62.15 MH/s 8934/0/17 1365 8100 112 W 554.87 KH/W | | 1 3070 57 C 0 % 61.89 MH/s 8928/0/0 675 8100 120 W 515.78 KH/W | | 2 3070 50 C 0 % 62.18 MH/s 9002/0/0 1395 8100 113 W 550.24 KH/W | | 3 3070 50 C 0 % 61.80 MH/s 9038/0/0 660 8100 114 W 542.08 KH/W | | 4 3070 49 C 0 % 62.20 MH/s 8983/0/0 1470 8100 120 W 518.33 KH/W | | 5 3070 48 C 0 % 62.15 MH/s 8978/0/4 1305 8100 120 W 517.96 KH/W | | 372.37 MH/s 53863/0/21 699 W 532.71 KH/W | +---+-----+----+---+-----------+----------+----+-----+-----+-------------+ 2Miners: Current Average 3070-2 421.77 MH/s 386.75 MH/s Simplemining: +---+-----+----+---+-----------+----------+----+-----+-----+-------------+ | ID GPU Temp Fan Speed Shares Core Mem Power Efficiency | +---+-----+----+---+-----------+----------+----+-----+-----+-------------+ | 0 1080 70 C 0 % 29.26 MH/s 2158/0/0 1594 4519 104 W 281.37 KH/W | | 1 1080 72 C 0 % 29.65 MH/s 2191/0/0 1607 4519 104 W 285.07 KH/W | | 2 1080 70 C 0 % 29.15 MH/s 2108/0/0 1582 4519 104 W 280.26 KH/W | | 3 1080 66 C 0 % 29.91 MH/s 2222/0/0 1620 4519 104 W 287.57 KH/W | | 4 1080 65 C 0 % 29.26 MH/s 2165/0/0 1582 4519 104 W 281.39 KH/W | | 5 1080 67 C 0 % 29.90 MH/s 2175/0/0 1632 4519 104 W 287.52 KH/W | | 6 1080 69 C 0 % 29.85 MH/s 2211/0/0 1607 4519 104 W 287.01 KH/W | | 7 1080 69 C 0 % 29.87 MH/s 2232/0/0 1632 4519 104 W 287.22 KH/W | | 236.85 MH/s 17462/0/0 832 W 284.68 KH/W | +---+-----+----+---+-----------+----------+----+-----+-----+-------------+ 2Miners: Current Average 1080-1 281.18 MH/s 240.44 MH/s 2Miners FAQ: My hashrate is lower than in the miner Since you start to mine your hashrate grows gradually. Please wait. The pool determines your hashrate based on the amount of shares sent by your mining rigs (workers). This value could be a little bit different from reported hashrate (in your mining software). Title: Re: RTX 3080 hashrate drop list Post by: Seph213 on April 29, 2021, 05:29:13 PM I dont understand the discussion about reported in the miner and shown in the pool. The Miner in the rig reports the hashrate of the rig and the pool calculates the hashrate out of the sended found shares. And thats always a difference. Mostly my hashrate at the pool is a bit higher than in the miner. 1%. But thats Luck etc. Simplemining: +---+-----+----+---+-----------+----------+----+-----+-----+-------------+ | ID GPU Temp Fan Speed Shares Core Mem Power Efficiency | +---+-----+----+---+-----------+----------+----+-----+-----+-------------+ | 0 3070 52 C 0 % 62.15 MH/s 8934/0/17 1365 8100 112 W 554.87 KH/W | | 1 3070 57 C 0 % 61.89 MH/s 8928/0/0 675 8100 120 W 515.78 KH/W | | 2 3070 50 C 0 % 62.18 MH/s 9002/0/0 1395 8100 113 W 550.24 KH/W | | 3 3070 50 C 0 % 61.80 MH/s 9038/0/0 660 8100 114 W 542.08 KH/W | | 4 3070 49 C 0 % 62.20 MH/s 8983/0/0 1470 8100 120 W 518.33 KH/W | | 5 3070 48 C 0 % 62.15 MH/s 8978/0/4 1305 8100 120 W 517.96 KH/W | | 372.37 MH/s 53863/0/21 699 W 532.71 KH/W | +---+-----+----+---+-----------+----------+----+-----+-----+-------------+ 2Miners: Current Average 3070-2 421.77 MH/s 386.75 MH/s Simplemining: +---+-----+----+---+-----------+----------+----+-----+-----+-------------+ | ID GPU Temp Fan Speed Shares Core Mem Power Efficiency | +---+-----+----+---+-----------+----------+----+-----+-----+-------------+ | 0 1080 70 C 0 % 29.26 MH/s 2158/0/0 1594 4519 104 W 281.37 KH/W | | 1 1080 72 C 0 % 29.65 MH/s 2191/0/0 1607 4519 104 W 285.07 KH/W | | 2 1080 70 C 0 % 29.15 MH/s 2108/0/0 1582 4519 104 W 280.26 KH/W | | 3 1080 66 C 0 % 29.91 MH/s 2222/0/0 1620 4519 104 W 287.57 KH/W | | 4 1080 65 C 0 % 29.26 MH/s 2165/0/0 1582 4519 104 W 281.39 KH/W | | 5 1080 67 C 0 % 29.90 MH/s 2175/0/0 1632 4519 104 W 287.52 KH/W | | 6 1080 69 C 0 % 29.85 MH/s 2211/0/0 1607 4519 104 W 287.01 KH/W | | 7 1080 69 C 0 % 29.87 MH/s 2232/0/0 1632 4519 104 W 287.22 KH/W | | 236.85 MH/s 17462/0/0 832 W 284.68 KH/W | +---+-----+----+---+-----------+----------+----+-----+-----+-------------+ 2Miners: Current Average 1080-1 281.18 MH/s 240.44 MH/s 2Miners FAQ: My hashrate is lower than in the miner Since you start to mine your hashrate grows gradually. Please wait. The pool determines your hashrate based on the amount of shares sent by your mining rigs (workers). This value could be a little bit different from reported hashrate (in your mining software). Well u see me my current hashrate is mostly below my reported hashrate. Also my avg hashrate is always below my current or reported and that’s only on my 3080 rig . My 1070 rig avg and reported are close by 5-6mhs . Do pools calculate ur payout by looking at avg hashrate or Current hashrate or Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on April 30, 2021, 04:33:46 AM Which pool do you mean?
My 3080s work fine. Average at the pool a bit over hashrate at the miner. I use phoenix miner with the 3080 because of the ram temp. Check if you have any rejected. If so, lower the ram a bit. If you mine at nicehash, move to 2miners. Title: Re: RTX 3080 hashrate drop list Post by: kokomucho on April 30, 2021, 10:08:06 AM Anyone using Colorful RTX 3080 Vulcan?
how's the temp? Title: Re: RTX 3080 hashrate drop list Post by: Wotan Wipeout on April 30, 2021, 05:20:26 PM I got a new suprim x, which has much better temps than my others.
Didnt need a pads mod. Might be just luck or they changed something so the pcb is more plan. | ID GPU Temp Fan Speed Shares Core Mem Power Efficiency | +---+-----+----+---+-----------+--------+----+-----+-----+-------------+ | 0 3080 44 C 0 % 102.59 MH/s 23/0/0 1455 10751 238 W 431.04 KH/W | | 1 3080 44 C 0 % 102.58 MH/s 28/0/0 1485 10751 225 W 455.90 KH/W | | 2 3080 44 C 0 % 102.60 MH/s 35/0/0 1440 10751 232 W 442.23 KH/W | | 3 3080 37 C 0 % 102.57 MH/s 25/0/0 1575 10751 230 W 445.97 KH/W | | 410.33 MH/s 111/0/0 925 W 443.60 KH/W | +---+-----+----+---+-----------+--------+----+-----+-----+-------------+ VRAM Temp is about 15 to 20 degrees cooler. Checked in windows. Model Clocks Hashrate Pwr °C/Fan 0: Msi NVIDIA RTX 3080 10GB 94.02.42.00.F7 1455/10751 102.59 GH/s 238 W 44°C / 0% 1: Msi NVIDIA RTX 3080 10GB 94.02.42.00.F7 1500/10751 102.58 GH/s 224 W 44°C / 0% 2: Msi NVIDIA RTX 3080 10GB 94.02.42.00.F7 1440/10751 102.60 GH/s 231 W 44°C / 0% 3: Msi NVIDIA RTX 3080 10GB 94.02.42.00.F7 1515/10751 102.57 GH/s 226 W 36°C / 0% 410.33 MH/s Title: Re: RTX 3080 hashrate drop list Post by: Trinitrophenol on July 01, 2021, 03:14:29 PM Minerstat Windows
Galax 3080 1 Click OC Power Limit : 250W Lock Core Clock : 1060 Mem Clock: 1200 Hashrate: 100.1mh/s MSI 3080 Gaming Z Trio (bios modded to Suprim X 94.02.42.00.F9) Galax 3080 1 Click OC Power Limit : 250W Lock Core Clock : 1060 Mem Clock: 900 Hashrate: 91.2mh/s For some reason I am not able to lock core clock on Z trio .. Title: Re: RTX 3080 hashrate drop list Post by: MSV on July 07, 2021, 09:31:52 AM I got a new suprim x, which has much better temps than my others. Didnt need a pads mod. Might be just luck or they changed something so the pcb is more plan. | ID GPU Temp Fan Speed Shares Core Mem Power Efficiency | +---+-----+----+---+-----------+--------+----+-----+-----+-------------+ | 0 3080 44 C 0 % 102.59 MH/s 23/0/0 1455 10751 238 W 431.04 KH/W | | 1 3080 44 C 0 % 102.58 MH/s 28/0/0 1485 10751 225 W 455.90 KH/W | | 2 3080 44 C 0 % 102.60 MH/s 35/0/0 1440 10751 232 W 442.23 KH/W | | 3 3080 37 C 0 % 102.57 MH/s 25/0/0 1575 10751 230 W 445.97 KH/W | | 410.33 MH/s 111/0/0 925 W 443.60 KH/W | +---+-----+----+---+-----------+--------+----+-----+-----+-------------+ VRAM Temp is about 15 to 20 degrees cooler. Checked in windows. Model Clocks Hashrate Pwr °C/Fan 0: Msi NVIDIA RTX 3080 10GB 94.02.42.00.F7 1455/10751 102.59 GH/s 238 W 44°C / 0% 1: Msi NVIDIA RTX 3080 10GB 94.02.42.00.F7 1500/10751 102.58 GH/s 224 W 44°C / 0% 2: Msi NVIDIA RTX 3080 10GB 94.02.42.00.F7 1440/10751 102.60 GH/s 231 W 44°C / 0% 3: Msi NVIDIA RTX 3080 10GB 94.02.42.00.F7 1515/10751 102.57 GH/s 226 W 36°C / 0% 410.33 MH/s I have a Suprim 3080 I am struggling to get above 95MH. Would you mind sharing your Simplemining Core, Mem and Power settings please? Also for 3070 I am getting 56 MH and would appreciate settings you are using. Thanks! |
