RTX 3080 hashrate drop list

[Seph213]

Any of you guys have a 8-10% difference between effective current hashrate and current hashrate ?

I’m using pheonixminer on ethermine .

Yes, I had a lot of stale shares with pheonixminer. So I switched to Trex and the problem disappeared. I'm using Nanopool.

Tried Trex and same issue . Current hashrate keeps fluctuating but my 1070 rig is constant 100% of the time

[jgonzi]

Any of you guys have a 8-10% difference between effective current hashrate and current hashrate ?

I’m using pheonixminer on ethermine .

Yes, I had a lot of stale shares with pheonixminer. So I switched to Trex and the problem disappeared. I'm using Nanopool.

Tried Trex and same issue . Current hashrate keeps fluctuating but my 1070 rig is constant 100% of the time

Try lolminer with the fix clock...  https://github.com/Lolliedieb/lolMiner-releases/wiki/Fix-Clock-Nvidia-for-Cuda-(English) That could help to reduce the temperature... if stilll fluctuating... reduce the core it will also reduce the Mhs but at one point will be fix hashing.

[dwupack]

Hello, I also have MSI RTX3080 Gaming X and some problems with ETH hash rate (88 only).

My stock BIOS was: 94.02.42.00.FB, flashed new Supreme X from techpowerup: 94.02.42.00.F9 but still no results.
No matter what I do GPU core is about 930MHz. Can You share Supreme X bios version and Afterburner settings for that card to get higher mh/s.

[Seph213]

Hello, I also have MSI RTX3080 Gaming X and some problems with ETH hash rate (88 only).

My stock BIOS was: 94.02.42.00.FB, flashed new Supreme X from techpowerup: 94.02.42.00.F9 but still no results.
No matter what I do GPU core is about 930MHz. Can You share Supreme X bios version and Afterburner settings for that card to get higher mh/s.

Now that u flashed the suprim bios , in msi afterburner u can increase the Pl to 108.

PL 108
Core curve at 1300
Memory at 1100 .

With these settings u’ll hit 97-98 . If u want to hit 100 push the mem to 1300 .

[Wotan Wipeout]

You dont need more power. You need well cooled ram.
My suprims doing 102.x hash with +1500 and around 225 Watt.

[Walrusbonzo]

Any of you guys have a 8-10% difference between effective current hashrate and current hashrate ?

I’m using pheonixminer on ethermine .

Yes, I had a lot of stale shares with pheonixminer. So I switched to Trex and the problem disappeared. I'm using Nanopool.

But its odd cause my 1070 rig reports the same on all counts . The 3080’s are the ones with issues

Same problem here, my 2080Ti, 3060Ti and 1660 were all fine with PhoenixMiner, only the 3080s had stale shares

[Wotan Wipeout]

Just a info for those 3080 users:

Using Windows with AB you can max clock the ram + 1500.
Using Linux you can go higher and get more hash.

Getting over 103 MH/s with RAM+3200 under linux - simplemining - latest GMiner - Kernel 6

Need well cooled gpu vram.

[Seph213]

Any of you guys have a 8-10% difference between effective current hashrate and current hashrate ?

I’m using pheonixminer on ethermine .

Yes, I had a lot of stale shares with pheonixminer. So I switched to Trex and the problem disappeared. I'm using Nanopool.

But its odd cause my 1070 rig reports the same on all counts . The 3080’s are the ones with issues

Same problem here, my 2080Ti, 3060Ti and 1660 were all fine with PhoenixMiner, only the 3080s had stale shares

I tried using trex but i have the same result . What are the 3080’s u have and whats their Oc settings ?

[Seph213]

You dont need more power. You need well cooled ram.
My suprims doing 102.x hash with +1500 and around 225 Watt.

Suprims don’t have power issues . He has a gaming trio X , those cards have a power limit issue and flashing the surprim firmware fixes that .

I have a gaming trio X and i tried everything including leaving it running in 0 celcius room to make sure it’s not thermal throttling problem.

I was only able to hit 98-100mhs once i flashed the surpim Os and brought up the PL to 108 .

[Wotan Wipeout]

@Seph213

Thats a point. But rising the powerlevel shouldnt help this much because
the 3080 dont need over 250 Watt for ETH. So i am amazed. Maybe faster
VRAM settings in the BIOS? My asus tuf oc cant do more than 98.5 at 1149.
Hope we can get more infos where the difference is.

[Seph213]

@Seph213

Thats a point. But rising the powerlevel shouldnt help this much because
the 3080 dont need over 250 Watt for ETH. So i am amazed. Maybe faster
VRAM settings in the BIOS? My asus tuf oc cant do more than 98.5 at 1149.
Hope we can get more infos where the difference is.

I don’t think the PL is about how much watts the card is pushing cause if u play am intensive video game like cyberpunk , you card will dish out more than 250 watts with no issues yet when u mine it refuses to go above 220.

 The reason ur not seeing higher output is because the coreclock throttles once u go pass +500 memory .

Now my trio X with PL at 108 is pushing 98mhs at 217watts according to phoenixminer .

My suprim X with PL at 60 pushes 98mhs but at 229 watts cause i raises the coreclock trying to fix the reported hashtare problem i’m having with 30 series cards .

So u see i don’t think PL only affects the power being delivered , i think theres more working in the backround that i’m simply not aware of so can’t really explain .

[Wotan Wipeout]

I am running the suprim x i have got at 1100 Mhz and 1500 RAM (Windows and custom voltage).
Powerlevel is at 100% but i doesnt affect the hash.

[Seph213]

I am running the suprim x i have got at 1100 Mhz and 1500 RAM (Windows and custom voltage).
Powerlevel is at 100% but i doesnt affect the hash.

Do you see a decent difference between reported hashrate and current hashrate ?

Is he avg hashrate very close to ur reported ?

[Wotan Wipeout]

I dont understand the discussion about reported in the miner and shown in the pool.
The Miner in the rig reports the hashrate of the rig and the pool calculates the hashrate out
of the sended found shares. And thats always a difference.

Mostly my hashrate at the pool is a bit higher than in the miner. 1%. But thats Luck etc.


Simplemining:
+---+-----+----+---+-----------+----------+----+-----+-----+-------------+
| ID GPU Temp Fan Speed Shares Core Mem Power Efficiency |
+---+-----+----+---+-----------+----------+----+-----+-----+-------------+
| 0 3070 52 C 0 % 62.15 MH/s 8934/0/17 1365 8100 112 W 554.87 KH/W |
| 1 3070 57 C 0 % 61.89 MH/s 8928/0/0 675 8100 120 W 515.78 KH/W |
| 2 3070 50 C 0 % 62.18 MH/s 9002/0/0 1395 8100 113 W 550.24 KH/W |
| 3 3070 50 C 0 % 61.80 MH/s 9038/0/0 660 8100 114 W 542.08 KH/W |
| 4 3070 49 C 0 % 62.20 MH/s 8983/0/0 1470 8100 120 W 518.33 KH/W |
| 5 3070 48 C 0 % 62.15 MH/s 8978/0/4 1305 8100 120 W 517.96 KH/W |
| 372.37 MH/s 53863/0/21 699 W 532.71 KH/W |
+---+-----+----+---+-----------+----------+----+-----+-----+-------------+

2Miners:    Current             Average
3070-2   421.77 MH/s   386.75 MH/s


Simplemining:
+---+-----+----+---+-----------+----------+----+-----+-----+-------------+
| ID GPU Temp Fan Speed Shares Core Mem Power Efficiency |
+---+-----+----+---+-----------+----------+----+-----+-----+-------------+
| 0 1080 70 C 0 % 29.26 MH/s 2158/0/0 1594 4519 104 W 281.37 KH/W |
| 1 1080 72 C 0 % 29.65 MH/s 2191/0/0 1607 4519 104 W 285.07 KH/W |
| 2 1080 70 C 0 % 29.15 MH/s 2108/0/0 1582 4519 104 W 280.26 KH/W |
| 3 1080 66 C 0 % 29.91 MH/s 2222/0/0 1620 4519 104 W 287.57 KH/W |
| 4 1080 65 C 0 % 29.26 MH/s 2165/0/0 1582 4519 104 W 281.39 KH/W |
| 5 1080 67 C 0 % 29.90 MH/s 2175/0/0 1632 4519 104 W 287.52 KH/W |
| 6 1080 69 C 0 % 29.85 MH/s 2211/0/0 1607 4519 104 W 287.01 KH/W |
| 7 1080 69 C 0 % 29.87 MH/s 2232/0/0 1632 4519 104 W 287.22 KH/W |
| 236.85 MH/s 17462/0/0 832 W 284.68 KH/W |
+---+-----+----+---+-----------+----------+----+-----+-----+-------------+

2Miners:    Current             Average
1080-1   281.18 MH/s   240.44 MH/s


2Miners FAQ:

My hashrate is lower than in the miner
Since you start to mine your hashrate grows gradually. Please wait. The pool determines your hashrate based on the amount of shares sent by your mining rigs (workers). This value could be a little bit different from reported hashrate (in your mining software).

[Seph213]

I dont understand the discussion about reported in the miner and shown in the pool.
The Miner in the rig reports the hashrate of the rig and the pool calculates the hashrate out
of the sended found shares. And thats always a difference.

Mostly my hashrate at the pool is a bit higher than in the miner. 1%. But thats Luck etc.


Simplemining:
+---+-----+----+---+-----------+----------+----+-----+-----+-------------+
| ID GPU Temp Fan Speed Shares Core Mem Power Efficiency |
+---+-----+----+---+-----------+----------+----+-----+-----+-------------+
| 0 3070 52 C 0 % 62.15 MH/s 8934/0/17 1365 8100 112 W 554.87 KH/W |
| 1 3070 57 C 0 % 61.89 MH/s 8928/0/0 675 8100 120 W 515.78 KH/W |
| 2 3070 50 C 0 % 62.18 MH/s 9002/0/0 1395 8100 113 W 550.24 KH/W |
| 3 3070 50 C 0 % 61.80 MH/s 9038/0/0 660 8100 114 W 542.08 KH/W |
| 4 3070 49 C 0 % 62.20 MH/s 8983/0/0 1470 8100 120 W 518.33 KH/W |
| 5 3070 48 C 0 % 62.15 MH/s 8978/0/4 1305 8100 120 W 517.96 KH/W |
| 372.37 MH/s 53863/0/21 699 W 532.71 KH/W |
+---+-----+----+---+-----------+----------+----+-----+-----+-------------+

2Miners:    Current             Average
3070-2   421.77 MH/s   386.75 MH/s


Simplemining:
+---+-----+----+---+-----------+----------+----+-----+-----+-------------+
| ID GPU Temp Fan Speed Shares Core Mem Power Efficiency |
+---+-----+----+---+-----------+----------+----+-----+-----+-------------+
| 0 1080 70 C 0 % 29.26 MH/s 2158/0/0 1594 4519 104 W 281.37 KH/W |
| 1 1080 72 C 0 % 29.65 MH/s 2191/0/0 1607 4519 104 W 285.07 KH/W |
| 2 1080 70 C 0 % 29.15 MH/s 2108/0/0 1582 4519 104 W 280.26 KH/W |
| 3 1080 66 C 0 % 29.91 MH/s 2222/0/0 1620 4519 104 W 287.57 KH/W |
| 4 1080 65 C 0 % 29.26 MH/s 2165/0/0 1582 4519 104 W 281.39 KH/W |
| 5 1080 67 C 0 % 29.90 MH/s 2175/0/0 1632 4519 104 W 287.52 KH/W |
| 6 1080 69 C 0 % 29.85 MH/s 2211/0/0 1607 4519 104 W 287.01 KH/W |
| 7 1080 69 C 0 % 29.87 MH/s 2232/0/0 1632 4519 104 W 287.22 KH/W |
| 236.85 MH/s 17462/0/0 832 W 284.68 KH/W |
+---+-----+----+---+-----------+----------+----+-----+-----+-------------+

2Miners:    Current             Average
1080-1   281.18 MH/s   240.44 MH/s


2Miners FAQ:

My hashrate is lower than in the miner
Since you start to mine your hashrate grows gradually. Please wait. The pool determines your hashrate based on the amount of shares sent by your mining rigs (workers). This value could be a little bit different from reported hashrate (in your mining software).

Well u see me my current hashrate is mostly below my reported hashrate.

Also my avg hashrate is always below my current or reported and that’s only on my 3080 rig .

My 1070 rig avg and reported are close by 5-6mhs .

Do pools calculate ur payout by looking at avg hashrate or Current hashrate or

[Wotan Wipeout]

Which pool do you mean?

My 3080s work fine. Average at the pool a bit over hashrate at the miner.
I use phoenix miner with the 3080 because of the ram temp.
Check if you have any rejected. If so, lower the ram a bit.

If you mine at nicehash, move to 2miners.

[kokomucho]

Anyone using Colorful RTX 3080 Vulcan?
how's the temp?

[Wotan Wipeout]

I got a new suprim x, which has much better temps than my others.
Didnt need a pads mod. Might be just luck or they changed something so the pcb is more plan.

| ID GPU Temp Fan Speed Shares Core Mem Power Efficiency |
+---+-----+----+---+-----------+--------+----+-----+-----+-------------+
| 0 3080 44 C 0 % 102.59 MH/s 23/0/0 1455 10751 238 W 431.04 KH/W |
| 1 3080 44 C 0 % 102.58 MH/s 28/0/0 1485 10751 225 W 455.90 KH/W |
| 2 3080 44 C 0 % 102.60 MH/s 35/0/0 1440 10751 232 W 442.23 KH/W |
| 3 3080 37 C 0 % 102.57 MH/s 25/0/0 1575 10751 230 W 445.97 KH/W |
| 410.33 MH/s 111/0/0 925 W 443.60 KH/W |
+---+-----+----+---+-----------+--------+----+-----+-----+-------------+

VRAM Temp is about 15 to 20 degrees cooler. Checked in windows.


Model   Clocks   Hashrate   Pwr   °C/Fan   
0: Msi NVIDIA RTX 3080 10GB 94.02.42.00.F7 1455/10751 102.59 GH/s 238 W 44°C / 0%   
1: Msi NVIDIA RTX 3080 10GB 94.02.42.00.F7 1500/10751 102.58 GH/s 224 W 44°C / 0%   
2: Msi NVIDIA RTX 3080 10GB 94.02.42.00.F7 1440/10751 102.60 GH/s 231 W 44°C / 0%   
3: Msi NVIDIA RTX 3080 10GB 94.02.42.00.F7 1515/10751 102.57 GH/s 226 W 36°C / 0%   
410.33 MH/s   

[Trinitrophenol]

Minerstat Windows

Galax 3080 1 Click OC
Power Limit : 250W
Lock Core Clock : 1060
Mem Clock: 1200
Hashrate: 100.1mh/s

MSI 3080 Gaming Z Trio (bios modded to Suprim X  94.02.42.00.F9)
Galax 3080 1 Click OC
Power Limit : 250W
Lock Core Clock : 1060
Mem Clock: 900
Hashrate: 91.2mh/s
For some reason I am not able to lock core clock on Z trio ..

[MSV]

I got a new suprim x, which has much better temps than my others.
Didnt need a pads mod. Might be just luck or they changed something so the pcb is more plan.

| ID GPU Temp Fan Speed Shares Core Mem Power Efficiency |
+---+-----+----+---+-----------+--------+----+-----+-----+-------------+
| 0 3080 44 C 0 % 102.59 MH/s 23/0/0 1455 10751 238 W 431.04 KH/W |
| 1 3080 44 C 0 % 102.58 MH/s 28/0/0 1485 10751 225 W 455.90 KH/W |
| 2 3080 44 C 0 % 102.60 MH/s 35/0/0 1440 10751 232 W 442.23 KH/W |
| 3 3080 37 C 0 % 102.57 MH/s 25/0/0 1575 10751 230 W 445.97 KH/W |
| 410.33 MH/s 111/0/0 925 W 443.60 KH/W |
+---+-----+----+---+-----------+--------+----+-----+-----+-------------+

VRAM Temp is about 15 to 20 degrees cooler. Checked in windows.


Model   Clocks   Hashrate   Pwr   °C/Fan   
0: Msi NVIDIA RTX 3080 10GB 94.02.42.00.F7 1455/10751 102.59 GH/s 238 W 44°C / 0%   
1: Msi NVIDIA RTX 3080 10GB 94.02.42.00.F7 1500/10751 102.58 GH/s 224 W 44°C / 0%   
2: Msi NVIDIA RTX 3080 10GB 94.02.42.00.F7 1440/10751 102.60 GH/s 231 W 44°C / 0%   
3: Msi NVIDIA RTX 3080 10GB 94.02.42.00.F7 1515/10751 102.57 GH/s 226 W 36°C / 0%   
410.33 MH/s   

I have a Suprim 3080 I am struggling to get above 95MH. Would you mind sharing your Simplemining Core, Mem and Power settings please?

Also for 3070 I am getting 56 MH and would appreciate settings you are using.

Thanks!