After 21 million bitcoins have been deployed by the bitcoin blackchain, the only thing left to do is mine transactions. Miners at that point will make money off of transaction fees.

-mode 1

I do not understand why to create all these coin coins that can not be undermined, I do not trust all these ico that they create, people always ready to cheat for money.
If you create a coin it must be removable at 100% stop

I had the same problem with cex.io, I waited almost 2 weeks, and did not reply to my email, they even banned me from twitter, in the end they sent my money,. This was the first time in almost four years that was happening,
Then on Friday I made another request for withdrawal in euros, the next day I was processed and sent

Install the 16.11.5 drivers and you are affixed

Your support is as good as it communicates to people, you can not give me explanations for the fiat withdrawal requests that have been waiting for more than 10 days and are still pending.

I have a question

Are you preparing for scam?
 

It is possible that nobody uses cex.io in this forum?

Apparently everyone here on the forum does not use cex.io to retire fiat,
And perhaps one reason is for sure, I think you are preparing to cheat everyone
 

Hi guys, have any of you managed these days to contact cex.io support? I retired on May 13, 1184 euros, and still pending, I tried sending the ticket, but I did not have a satisfactory answer because they believed it was an accreditation, but I'm expecting to receive the sum of 1184.42 on My bank account ,.

Does anyone have any news about cex? Do you have the same problems? Thanks for info.
 

We need a stability update
 

Here is the new miners, said the fact

I agree to put a string. Bat to help people like me who can not start mining execution, then put an example of file.bat, so people copy, and change the prarameters with theirs.
thank you

I would not know if the blame and pool, or the claymore miner, from the latest versions of claymore, the hash varies a lot, from 28.5 mhs, it goes down to 22mhs, 17mhs, then it goes back to 21, and returns to 28mhs, this It continues all day, and at least 2/3 times a day the miner crashes, and I have to restart the pc, then continue the first minutes with stable hash to 28.5, ETC + Pasc, and after a few minutes it returns to vary from Mhs, up to the block
 

Without BIOS mod you can not get those values

Surely fault and risers, check all gpus well, uninstall drivers with DDU, and insert one at the fly gpu, check if the operating system detects the gpu and enter the other, this up to 6 gpu when the system Recognizes all 6 gpu, installs 16.11.5 drivers
Hope to help
 

Slower than 9.1 and 9.2, and no speed improvement on etc only

back 9.2 version

But drivers 17.2.1 does not require signature if the bios is edited?

Got incorrect temperature 511, ignore
18:33:56:034   1504   Got incorrect temperature 511, ignore
18:33:59:425   1504   Got incorrect temperature 511, ignore
18:34:00:065   1ac0   ETH: checking pool connection...
18:34:00:065   1ac0   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

18:34:00:159   1ac0   got 243 bytes
18:34:00:159   1ac0   buf: {"jsonrpc":"2.0","id":0,"result":["0x2ac4c09721561e2cacd89f8992fd69d20be99744b9a1342b93ab4319e93987ba","0x3bdc9df6827f9db2a52b71fe21b847066a233755fd6b15bdb62a9c5e0aeb1d14","0x00000000dbe6fecebdedd5beb573440e5a884d1b2fbf06fcce912adcb8d8422e"]}

18:34:00:175   1ac0   parse packet: 242
18:34:00:190   1ac0   ETH: job is the same
18:34:00:190   1ac0   new buf size: 0
18:34:02:815   1504   Got incorrect temperature 511, ignore
18:34:06:190   1504   Got incorrect temperature 511, ignore
18:34:07:816   1ac0   got 243 bytes
18:34:07:816   1ac0   buf: {"jsonrpc":"2.0","id":0,"result":["0xbf702a346332ae819a51c82c837a8fd43bb02e35ce878bd15e6663d7a6e0bd9f","0x3bdc9df6827f9db2a52b71fe21b847066a233755fd6b15bdb62a9c5e0aeb1d14","0x00000000dbe6fecebdedd5beb573440e5a884d1b2fbf06fcce912adcb8d8422e"]}

18:34:07:831   1ac0   parse packet: 242
18:34:07:847   1ac0   ETH: job changed
18:34:07:847   1ac0   new buf size: 0
18:34:07:862   1ac0   ETH: 04/19/17-18:34:07 - New job from etc-eu2.nanopool.org:19999
18:34:07:862   1ac0   target: 0x00000000dbe6fece (diff: 5000MH), epoch #119
18:34:07:862   1ac0   ETH - Total Speed: 141.234 Mh/s, Total Shares: 6, Rejected: 0, Time: 00:03
18:34:07:878   1ac0   ETH: GPU0 28.225 Mh/s, GPU1 28.263 Mh/s, GPU2 28.251 Mh/s, GPU3 28.244 Mh/s, GPU4 28.251 Mh/s, GPU5 0.000 Mh/s
18:34:09:581   1504   Got incorrect temperature 511, ignore
18:34:09:675   1ac0   send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x86d30d0", "0x0000000000000000000000000000000000000000000000000000000001e42ded"]}

18:34:10:097   1ac0   ETH: checking pool connection...
18:34:10:097   1ac0   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

18:34:10:191   1ac0   got 243 bytes
18:34:10:191   1ac0   buf: {"jsonrpc":"2.0","id":0,"result":["0xbf702a346332ae819a51c82c837a8fd43bb02e35ce878bd15e6663d7a6e0bd9f","0x3bdc9df6827f9db2a52b71fe21b847066a233755fd6b15bdb62a9c5e0aeb1d14","0x00000000dbe6fecebdedd5beb573440e5a884d1b2fbf06fcce912adcb8d8422e"]}

18:34:10:206   1ac0   parse packet: 242
18:34:10:222   1ac0   ETH: job is the same
18:34:10:222   1ac0   new buf size: 0
18:34:12:956   1504   Got incorrect temperature 511, ignore
18:34:13:034   1504   Got incorrect temperature 511, ignore
18:34:13:066   1504   GPU0 t=48C fan=82%, GPU1 t=0C fan=0%, GPU2 t=45C fan=81%, GPU3 t=50C fan=81%, GPU4 t=52C fan=81%, GPU5 t=52C fan=84%
18:34:13:066   1504   em hbt: 0, fm hbt: 0,
18:34:13:066   1504   watchdog - thread 0, hb time 78
18:34:13:066   1504   watchdog - thread 1, hb time 219
18:34:13:066   1504   watchdog - thread 2, hb time 234
18:34:13:081   1504   watchdog - thread 3, hb time 78
18:34:13:081   1504   watchdog - thread 4, hb time 47
18:34:13:081   1504   watchdog - thread 5, hb time 188
18:34:13:081   1504   watchdog - thread 6, hb time 156
18:34:13:081   1504   watchdog - thread 7, hb time 16
18:34:13:097   1504   watchdog - thread 8, hb time 16
18:34:13:097   1504   watchdog - thread 9, hb time 156
18:34:13:097   1504   watchdog - thread 10, hb time 74578
18:34:13:097   1504   WATCHDOG: GPU 5 hangs in OpenCL call, exit
18:34:13:097   1504   watchdog - thread 11, hb time 74422
18:34:13:113   1504   WATCHDOG: GPU 5 hangs in OpenCL call, exit
18:34:13:159   1504   Got incorrect temperature 511, ignore
18:34:14:314   1504   Restarting OK, exit...

now the speed of eth and reached its limit, now you need to work on stability,
and practically impossible to manually restart the miner because crashes for no reason, why some gpu reaches 0, and the watchdog detects it will not be possible to restart

claymore've noticed that the hash output varies version 9.1? 28 mhs,
collapses to 21, 18, 11 also wound mh / s