Show Posts
|
Pages: [1] 2 3 4 »
|
Hello. I'm trying to mine wmc coin with lolminer 0.9.7 on frostypool.com with 6x RX480 ethereum custom bios. five cards are working perfect and are hashing with 0.6 g/s but the first card (in miner card #0) is not working. It is not hashing and the hashrate is 0.00. I tried to disconnect all other cards and lived in the miner only the first card but it's hashrate is still 0
Can anyone please help me to solve this problem? The first card is AMD RX480 8GB Sapphire Nitro+ with Samsung memory. The system is windows 10 and amd blockchain driver.
|
|
|
will there be any special requirements for the computer to run the basic zelnode?
And how many coins are needed to run each of this nodes?
|
|
|
Everyone got the payout! Can you confirm this? I got my coins!
|
|
|
Phobos [PBS] added to FrenchMiningClub ONLY 0.2% FEE for a Week! No registration required.Code: -a lyra2z --url stratum+tcp://tmp.frenchmining.club:4553 -u DDy2RAVr1LsAz9CPFPHZe1mFNNkR6pBp3r -p c=PBS Please set minimum payout for this wallet is 10 PBS Or maybe 5 or 2 PBS is better, because from the block 600 the mining reward will reduce by 70% and small miners as me, will have no chance to collect 10 PBS in defined time
|
|
|
the mainnet is down ? my miners not work, rpc error.
Nope mainnet never went down, I had to re-sync the pool's daemon but everything is back to normal now. jim, how can i do solo mining? I'm interested too.
|
|
|
do someone know the rpc port to make solo mining?
|
|
|
Please read the previsous post, frontend under upgrade, so previous accessible here: tmp.frenchmining.club and stratum connection works too thanks the connection is working, but how long does it takes to upgrade the frond end? I'd like to see my stats
|
|
|
Please read the previsous post, frontend under upgrade, so previous accessible here: tmp.frenchmining.club and stratum connection works too thanks
|
|
|
can someone share rpc port? or how to mine?
|
|
|
Hey. after what time should the POS mode will be enabled?
To start off, open your wallet and ensure that your wallet has a balance, and the coins aren’t immature. It’ll take 80 confirmations before the coins are confirmed in your wallet, and 24 hours before the coins have matured. If your coins have matured long enough, you’ll see the triangle in the bottom right corner turn orange. This means your coins are staking And what does this means: "Staking enabled for 18 inputs weighing 348 coin days"?? Essentially you have 18 different inputs that are staking. The combined total of your stake weight is 348 coin days. The formula for stake weight is (# of Coins) * (# of Days in Wallet - 1) Thanks for your answer! And what wight do I need to stake?
|
|
|
Hey. after what time should the POS mode will be enabled?
To start off, open your wallet and ensure that your wallet has a balance, and the coins aren’t immature. It’ll take 80 confirmations before the coins are confirmed in your wallet, and 24 hours before the coins have matured. If your coins have matured long enough, you’ll see the triangle in the bottom right corner turn orange. This means your coins are staking And what does this means: "Staking enabled for 18 inputs weighing 348 coin days"??
|
|
|
Dev please write here when are you going to bring the update, which will fix the resync problem?
|
|
|
I would not advice to mine. It works only a few seconds, only sometimes.
Let's wait an update.
How do i know if it works? Will I get my shares % or will i see the pool heshrate (now it is 0)?
|
|
|
When the wallet cannot get the "getblocktemplate", authentification fails (99% of time). Do not spend to much power to mine, it's just a "test". It is working now! I'm mining you're mining on the wallet or pool? I'm mining on pool, but until now it did not works
|
|
|
When the wallet cannot get the "getblocktemplate", authentification fails (99% of time). Do not spend to much power to mine, it's just a "test". It is working now! I'm mining But as I see, my hashrate is 5.7 Mh/s but my shares are 0%. is it ok?
|
|
|
When the wallet cannot get the "getblocktemplate", authentification fails (99% of time). Do not spend to much power to mine, it's just a "test". It is working now! I'm mining
|
|
|
Sometimes, mining is working. Just sometimes ... 2 blocks found at the pool. We can try Mining Qbic with neoscrypt algo :
- Stratum : lycheebit.com:4233
- User : YOUR_QBIC_ADDRESS
- Password : c=QBIC
"Stratum authentication failed" :/ same here same here
|
|
|
When can we start GPU mining?
In couple of days ,we are working on it . And what about cpu mining? it is not working properly because the wallet resyncs in every minute
|
|
|
|