Is there an easy to figure out RAC to BBP payout ratio. If I have this much RAC, I should expect this much BBP based on the ratio. Today seems to be about 0.5x. 1 RAC gives 0.5 BBP assuming you have full stake.
That would be the easiest way, since it changes constantly. Just to take the top PODC miner that has no cameroon-one component and publish the ratio here weekly, etc. |
|
|
|
When trying to use the XMRig miner, even though I set it to use rx.biblepay.org:3001 as the pool, it still says it's using rxtest.biblepay.org. Is this correct? Thanks!
This was just recently fixed on the pool side and restarted; to confirm, please close the miner and restart the miner and it should correct the DNS location now. Thanks... |
|
|
|
|
We also have a new randomx faucet coming online right before the cutover height, that requires an account to be activated on forum.biblepay.org.
|
|
|
|
** RANDOMX POOLS - UPGRADE INSTRUCTIONS FOR POOL OPERATORS **
If you are running a BiblePay POBH pool and want to upgrade it to RandomX, please follow the normal instructions first: 1. Before doing this, be sure not to clear the redis database, otherwise you will lose all your outgoing payments (IE you will short the miners for the next 120 blocks). 2. Upgrade the biblepay-qt or biblepayd server to the rx version. 3. In this document: https://github.com/biblepay/node-open-mining-portal/blob/master/Deploy%20a%20Nomp%20BiblePay%20Pool.txtfollow the "Upgrading the Pool" section first to upgrade the pool code. Once you do this, POBH will never work again and the pool will be RandomX only (so, it would be a good idea to do this when you are ready to retire POBH). In the case of rx.biblepay.org, Im going to leave the old pool run until it pays everyone their latent owed balances, and start a new parallel pool for rx. In other cases you may want to upgrade a few hours before the cutover height. The pool will still pay the old balances out in 120 blocks. 4. In this document: https://github.com/biblepay/node-open-mining-portal/blob/master/Deploy%20a%20Nomp%20BiblePay%20Pool.txtFind the section "RandomX Upgrade Information", and change the keys and values in biblepay.json and config.json that suit your pool per the instructions. Your new pool monero address should appear on the front page of the pools website in the lower left, and, this will let everyone see how much each pool collects per month for orphan-charity.
|
|
|
|
When trying to run the new wallet installer from Biblepay.org, I get an error:
Installer integrity check has failed.
Also a question about the new dual mining, is it required to use the CLI miner or does the new wallet dual mine as well? Thanks!
A) Could you please provide the link that you downloaded that from - and does the error occur when you first execute the installer? EDIT: I just upgraded my home windows node without a problem - although remember everyone to move your folder to %appdata%\biblepay when doing this upgrade. B) You can still solo mine after the next mandatory height, using the core wallet, but it is vehemently unprofitable because it is 40* slower than xmrig. For all intents and purposes people will need to mine with xmrig-bbp after that height: https://wiki.biblepay.org/Upgrade_to_RandomXSo does this mean moving forward all mining is pool mining or can the external miner solo mine also. Sorry late to the game here but have been helping my brother's doctor office get the supplies they need to be able to fight this wonderful virus that is going on. If anyone has a link on how to both Solo and Pool mine that would be awesome as I am only back at my house for another 24 hours or so before going to get more necessary supplies. Thanks Welcome back! It is always good to have a stronger community. So - although in the future, we may only offer pool mining (this would specifically be when we see hackers trying to circumvent the 10% tithe by solo mining), but in the mean time, it is possible to solo mine during this startup phase (with randomx). But note that my personal feelings are everyone will want to pool mine anyway, to get the dual hash rewards (who would want to earn half, because when solo mining you cannot earn XMR, but only BBP). This should get you started with randomx mining - see the xmrig part. We are working on bringing up the pool at rx.biblepay.org later today (I don't want to open it too early because I don't want people hashing empty hashes before the cutover height) height 184675: https://wiki.biblepay.org/Upgrade_to_RandomX |
|
|
|
exec associate _Andrei55 _--------------------------- true Here what you need to enter--1.Verification Code 2.Cross-Project Id First or second
Hi - e.push_back(Pair("Step 1", "Log into your WCG account at 'worldcommunitygrid.org' with your WCG E-mail address and WCG password.")); e.push_back(Pair("Step 2", "Click Settings | My Profile. Record your 'Username' and 'Verification Code' and your 'CPID' (Cross-Project-ID).")); e.push_back(Pair("Step 3", "Click Settings | Data Sharing. Ensure the 'Display my Data' radio button is selected. Click Save. ")); e.push_back(Pair("Step 4", "Click My Contribution | My Team. If you are not part of Team 'BIBLE PAY' click Join Team | Search | Bible Pay | Select Bible Pay | Click Join Team | Save.")); e.push_back(Pair("Step 5", "NOTE: After choosing your team, and starting your research, please give WCG 24 hours for the CPID to propagate into " + CURRENCY_TICKER + ". In the mean time you can start Boinc research - and ensure the computer is performing WCG tasks. ")); e.push_back(Pair("Step 6", "From our RPC console, type, exec associate your_username your_verification_code")); e.push_back(Pair("Step 7", "Wait for 5 blocks to pass. Then type 'exec rac' again, and see if you are linked! ")); e.push_back(Pair("Step 8", "Once you are linked you will receive daily rewards. Please read about our minimum stake requirements per RAC here: wiki." + DOMAIN_NAME + "/PODC")); So in exec associate , you should type the "your_wcg_username" first, then "your_verification_code" second. To get the Verification Code, follow step 1 & 2 from above ^. (Note: The verification code is from the wcg account settings above, it is different than your CPID). Thanks... |
|
|
|
When trying to run the new wallet installer from Biblepay.org, I get an error:
Installer integrity check has failed.
Also a question about the new dual mining, is it required to use the CLI miner or does the new wallet dual mine as well? Thanks!
A) Could you please provide the link that you downloaded that from - and does the error occur when you first execute the installer? EDIT: I just upgraded my home windows node without a problem - although remember everyone to move your folder to %appdata%\biblepay when doing this upgrade. B) You can still solo mine after the next mandatory height, using the core wallet, but it is vehemently unprofitable because it is 40* slower than xmrig. For all intents and purposes people will need to mine with xmrig-bbp after that height: https://wiki.biblepay.org/Upgrade_to_RandomX |
|
|
|
|
I'm going to create a faucet for new RandomX miners this coming week.
I think it will go something like this:
- RandomX miner creates an account on forum.biblepay.org
- Makes a post in the mining thread with their new BBP address
- We pay the reward from that thread
I'll give more when its ready.
If possible, I might add a bbp-reward-id to the biblepaycore client soon; this will ensure a new RX miner syncs from the core first.
|
|
|
|
Hey Rob, is there a possibility of getting a BBP<->GRC pairing on SouthXchange?
So I spoke to SX today regarding the two new pairs, and they made me aware that to pair a non-standard ticker to BBP as a base is not as "easy" as we assume. (A standard pair would be something like ETH->BBP or BTC->BBP, but XMR->BBP is a non-standard base). So to qualify as a base pair, the other ticker (GRC or XMR) has to meet certain guidelines. Unfortunately neither meet the guidelines at this time. So the status is: GRC->BBP is not possible at this time XMR->BBP may be possible soon I asked them to keep us notified as soon as XMR->BBP might be possible and explained why, since we will be liquidating a lot of XMR in the future with our new mining rewards plan and orphan liquidation plan (in XMR). GRC is not possible I assume because of the low volume (to be a base pair). XMR is close, but they don't consider it a base yet. |
|
|
|
Hey Rob, is there a possibility of getting a BBP<->GRC pairing on SouthXchange?
Sure, let me check on BBP-GRC and BBP-XMR. |
|
|
|
|
** What is Dual Hash Mining **
After March 24th, we will offer dual-hash mining with rewards in both BBP+XMR. This is slightly different than merged mining, in that BBP's blocks are now solved with an equation that prevents pre-image attacks.
In theory, you will receive approximately 190% more revenue for mining (more specifically, 90% in XMR rewards, and 100% of your hashpower in BBP rewards), while still contributing 10% to orphan charity.
Each randomx hash has a full 100% chance of solving a BBP block (or a pool share), while each randomx hash still has an equal chance of solving an XMR share.
This will theoretically attract an unlimited amount of XMR miners to BiblePay.
|
|
|
|
BiblePay - 1.5.0.7
Mandatory Upgrade for Entire Network @184675 (March 24th, 2020)
- Add RandomX Mining to biblepaycore - Add corporate whitebranding (for the future - this is dormant) - Add DAC images and logos - Merge Dash Mainnet changes up to Jan 2020 into Prod mandatory release - RandomX starts at 184675 - Merge in changes to block database - Move datastore to ~/.biblepay ** Note: This upgrade also requires new mining software after block 184675, with the switch to RandomX ** Note: The wallet and data directory have been moved back to our original location (~/.biblepay) to cut down on confusion. ** Our github location has been moved back to the original location ( https://github.com/biblepay/biblepay) ** The new RandomX pool will come on-line approx. 1 day before our go live. The address will be: rx.biblepay.org ** Binaries have been released, and names and sha hash names have changed on biblepay.org. Note, I believe we will not be able to release binaries for Rasberry pi or Arch. You may be able to self compile those. We are also limited to initially releasing 64 bit binaries for Windows and Linux. (NOTE: This is not because we are lazy or don't care about 32 bit, it's because both MIP and I receive errors in the randomx compile process for the 32bit processors. We believe RX may not work on 32bit, therefore we must delay 32bit until we do more research.) Please provide feedback to us if you find a binary is missing or does not work. Please see this document for upgrade instructions: https://wiki.biblepay.org/Upgrade_to_RandomX
|
|
|
|
Random info on Coronavirus and 5G: First I want to say, take all of this up in prayer and don't believe any of this by default. So I watched a womans dream who said she was told by the Lord that there is a link between Coronavirus and 5g. Actually one dream was more of her knowing that Coronavirus was a bioterror weapon first. The other dream was that 5g is a weapon being rolled out against the public that can 'activate' future viruses. So then I did a little research comparing the 5g map to the coronavirus outbreak map and did see a high correlation (although, remember, 5g is always placed in areas of high population, so you cant assume there is actually a link immediately - since traffic is naturally higher in those areas). Anyway I came across this article which I copied down so it doesn't get removed: https://san.biblepay.org/Healing/Immunotoxity_of_5g_and_Coronavirus.pdfA few things stand out to me. The highest magnitude item is "Stress Decompensation". If you search for that term you will see the general idea is the body has a good immune system, and we have a reserve of more capacity in our immune system for stressful situations. But if that stress is not removed, the immune system degrades and self destructs. This strikes me as solid scientifically (based on the rest of the article). So the theory is 5g is actually penetrating the immune system and weakening it due to stress (constantly). Now, if you look at frequency ranges, a lot of people believe 5g is the same as your household router freq, but thats not true. The router at home is 2.4 GHZ. 5g is 24Ghz (this is 10* more in speed of vibration). So, there is a conceptual change that we are going to install an entire infrastructure and blanket the world with an "experimental" level of vibration. Anyway, the womans dream was that some nefarious group created the coronavirus first as a weapon, created the antitdote, took it themselves, then they use the 5g transmitters as an "activator". I wanted to look at the coronavirus itself, its shape to see if it looks like a radiation receiver. Just looking at it, it is perfectly round (like a dipole) - meaning it would be good at receiving energy at its harmonic frequency. Next it has these cones everywhere that look like satellite dish receivers, almost as if the circumference of each could be tuned to receive a certain frequency. I'll stop there - as I have no idea if a virus can be tuned to a certain resonant frequency (such as 24GHZ) and become "activated". 5G is initially deployed (especially the high frequency) in dense populated area because of the short distance (1 city block) each node can effectively communication at. In that way, I see the logic in coronavirus and 5G deployment. Do you know of any other 5G deployed areas around the world that supports this idea as well? T-Mobile's 5G network uses the 600-Mhz spectrum, part of which is also used for its 4G service. That's a frequency that's much lower than that being used by the two biggest carriers in the United States, AT&T and Verizon. I havent had much time to look at it, but it bugs me that we as citizens dont have a say in something that could be affecting our lives. Its something that will radiate every creature that walks outside and thats highly unnerving. The only area I checked is Dallas, and AT&Ts towers came up something that they won the 1.5 billion bid on 24ghz 5g devices, and I did see Dallas is 24ghz : https://www.lightreading.com/mobile/5g/24ghz-5g-auction-passes-$17b-/d/d-id/750552 I noticed Russia, who has no 5g almost has no cases of coronavirus also, which is strange. |
|
|
|
Random info on Coronavirus and 5G: First I want to say, take all of this up in prayer and don't believe any of this by default. So I watched a womans dream who said she was told by the Lord that there is a link between Coronavirus and 5g. Actually one dream was more of her knowing that Coronavirus was a bioterror weapon first. The other dream was that 5g is a weapon being rolled out against the public that can 'activate' future viruses. So then I did a little research comparing the 5g map to the coronavirus outbreak map and did see a high correlation (although, remember, 5g is always placed in areas of high population, so you cant assume there is actually a link immediately - since traffic is naturally higher in those areas). Anyway I came across this article which I copied down so it doesn't get removed: https://san.biblepay.org/Healing/Immunotoxity_of_5g_and_Coronavirus.pdfA few things stand out to me. The highest magnitude item is "Stress Decompensation". If you search for that term you will see the general idea is the body has a good immune system, and we have a reserve of more capacity in our immune system for stressful situations. But if that stress is not removed, the immune system degrades and self destructs. This strikes me as solid scientifically (based on the rest of the article). So the theory is 5g is actually penetrating the immune system and weakening it due to stress (constantly). Now, if you look at frequency ranges, a lot of people believe 5g is the same as your household router freq, but thats not true. The router at home is 2.4 GHZ. 5g is 24Ghz (this is 10* more in speed of vibration). So, there is a conceptual change that we are going to install an entire infrastructure and blanket the world with an "experimental" level of vibration. Anyway, the womans dream was that some nefarious group created the coronavirus first as a weapon, created the antitdote, took it themselves, then they use the 5g transmitters as an "activator". I wanted to look at the coronavirus itself, its shape to see if it looks like a radiation receiver. Just looking at it, it is perfectly round (like a dipole) - meaning it would be good at receiving energy at its harmonic frequency. Next it has these cones everywhere that look like satellite dish receivers, almost as if the circumference of each could be tuned to receive a certain frequency. I'll stop there - as I have no idea if a virus can be tuned to a certain resonant frequency (such as 24GHZ) and become "activated". |
|
|
|
With coronavirus scare, many religious organizations are going online with live streaming or pre-recorded videos. Rob, I know you mentioned wanting to start an online church....
Yes, I would like to clear a path to draw up the requirements for guest pastors in the next web site release, and make some preaching videos. Id like to have some type of commission structure also so tithes through views could pay the guest pastors, and we could have a history of sermons. |
|
|
|
|
Show Posts
