i have seen this one but i still dont understand what to remove and what to leave , i dont think its like this. Please if you have time to fix my bat. file , i find it complcated. Thank you!

EthDcrMiner64.exe -epool us2.ethpool.org:3333 -ewal D69af2A796A737A103F12d2f0BCC563a13900E6F.rig1 -epsw x -dpool stratum+tcp://siamining.com:9980/miner/header?address=1d4e33f77fbd1dfObDF77bd547fbe12b5bdOfaf355bccb403e4d1faacc73448cOc28ec3ea2eb1.rig1= -dcoin sia

up, pm sent

supersonic, that worked!

tried the gen2 first and nothing, but then after i disabled onboard graphics (hadda plug into gpu obviously) and that did the trick.

mining with claymore at the moment... can't get nicehash miner to work yet, but not such a biggie atm.

THANKS!

 

Let me show some images of whats setup.

PSU (Yes it is dead ended on the biggest plug)



Unit



I don't know what I did wrong, but this thing just wont kick on for me.

Titan 1: EUR 3500
Titan 2: EUR 7000

I think he'd be glad to use MSI AB as soon as you or somebody else ports it to Linux (see above, he runs Linux OS).

BTW, similar question: who and how downvoltages HD79xx/R92xx AMD cards on Linux? I tried atitweak but it shows performance levels 0 and 1 only, but cards run at 2 and 3. No way to change voltage. od6config is for newer cards. Any other ways apart from modding the BIOS? Any tool for Linux?

Mid 19mhs stock voltage 1050 core 1500 mem
GenEthOS stock OS
I've had no luck with CDM core or mem settings they crash my miner.

Edit: sorry forgot to add it's a MSI 280x Gaming OC 3GB

Even with your command line the result is:

C:\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL Catalyst 15.12
\Claymore's Dual Ethereum+Decred AMD GPU Miner v1.2 Beta - POOL>EthDcrMiner64.ex
e -epool coinotron.com:3344 -ewal Redhex.rig1 -esm 2 -epsw x -allpools 1

╔════════════════════════════════════════════════════════════════╗
║   Claymore's Dual Ethereum + Decred AMD GPU Miner  v1.2 Beta   ║
╚════════════════════════════════════════════════════════════════╝

Cards available: 4
GPU #0: name: Tahiti, 3072 MB available, 28 units
GPU #1: name: Tahiti, 3072 MB available, 28 units
GPU #2: name: Tahiti, 3072 MB available, 28 units
GPU #3: name: Tahiti, 3072 MB available, 28 units
Total cards: 4

Catalyst 15.12 is REQUIRED for best performance and compatibility
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Initializing...

POOL version
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: qtminer stratum mode

ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3344
ETH: Stratum - Connected
Auth failed
: {"id":0,"result":null,"error":[-32600,"InvalidRequest",null]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'coinotron.com' <178.217.186.125> port 3344
ETH: Stratum - Connected
Auth failed
: {"id":0,"result":null,"error":[-32600,"InvalidRequest",null]}

My complete bat file is:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool coinotron.com:3344 -ewal Redhex.rig1 -esm 2 -epsw x -allpools 1


The problem occurs ... maybe someone at coinotron can confirm ... or not ?

or your 280x had elpida RAMS, read about the performance issue with that compared to 280x with hynix RAMS many months ago.

mine is hynix BTW.

mine is ~20MH ETH and ~300MH DCR

1100 cclock and 1375 mclock

don't forget this on your .bat

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

same here - all good, zero invalids.... hard to believe... 
even during using qtminer.exe, i do get a few invalids but not much.

I wish i can say the same for DCR, my pool have 8-9% average invalids/rejects.

Hi,

I currently trying out the miner at ethermine.org looks OK I it looks like I got an increase in performance on my two R9 290 cards.

However I noticed that no "reported hashrate" are reported, that is suppose to be the current hash rate of the miner.

Is there a way to assign a rig name? Now on ethermine.org Id just say "default".

Overall very happy about the miner, great job Claymore!

All the best,
Christer

WTS 3x AMD RADEON 7990 in perfect working condition 
I am waiting your offers
Bitcoin payments with Ognasty escrow.

Location Europe but i can send them to USA also (guaranty without tax imports)

2 working miners that produce over 8TH between them and a months hosting, yet no one is interested...