Hope you guys are ordering using an affiliate link!!!
|
|
|
0% IS GOOD, BUT LOOKING FOR EQUAL HASH PRODUCTION ON POOL--WILLING TO GIVE IT A TRY Titan Owners need a little accommodation, and you need a little hash--symbiotic relationship, for sure! Now it's time to convert that to coin! Thanks!
Thanks for coming over. We are at ~ 2.5GHS now...increasing slowly but surely!!
|
|
|
It looks like you can still buy the new pack and get affiliate referral at least until the end of the week. So if anyone is still looking to get some more shares now would be a good time. You get more shares with the new packs, probably still get the affiliate bonus, still get 8% off with BTC payment and you get this weeks payout on those shares Remember, only invest what you can afford to lose!!!
|
|
|
We are now 6 Titans with ~1.8GHS+ !!!
I hope to see many more Titans come over in the next several days!!!
|
|
|
i give it a try!!! 0% fee are always well accepted :-) We are ~ 1GHS already and have found 4 blocks !!!
|
|
|
Get your shares cheaper than on LTCGear here: How old are these shares?
|
|
|
www.GameofCoins.net #gameofcoins IRC 0% fee, Titan friendly, we need your help to increase our hashrate. stratum+tcp://gameofcoins.net:9302 (DIFF 1536) username: YOUR LITECOIN ADDRESS password: ANYTHING YOU LIKE stratum+tcp://gameofcoins.net:9300 (DIFF 8192) username: YOUR LITECOIN ADDRESS password: ANYTHING YOU LIKE
|
|
|
Still no payouts wtf...
Yes my friend too. Wondering what happens thou. I got my payout, I am sure it is just technical issue.
|
|
|
Has anyone seen the MOD's in stock lately?
|
|
|
From payout page on ltcgear
I got several support request with same question – the shares gained from multiplication generate payout only after they were added (the same like last time – only this time addresses and coin choices were sampled during payout day).
BTC payment received.
|
|
|
Payout watch in effect
|
|
|
COIN SUCKS DEV SUCKS DEAD COIN
|
|
|
Well it has finally happened. The first time the pci-e cable melted on the psu and I was able to avoid RMA. This time the connector on the cube fried. One of the 6 pins is completely black and it won't power up anymore. Sent support/rma request. Your request (35659) has been received and is being reviewed by our support staff. I know KNC does not work on weekends. Will keep this thread updated with procedure and responses. EDIT: The cables used are the stock cables that come with the Seasonic x-1050. These cables are 16AWG and state they are High Current on the box. 1. 80PLUS® Gold Certified Super High Efficiency 2. Full Modular Cabling Design 3. Patented DC Connector Module with Integrated VRM [Voltage Regulator Module] 4. DC to DC Converter Design 5. Seasonic Hybrid Silent Fan Control 6. Sanyo Denki San Ace Silent Fan 7. Conductive Polymer Aluminum Solid Capacitors 8. Highly Reliable 105℃ Japanese Brand Capacitors 9. Tight Voltage Regulation [±3%] 10. Active Power Factor Correction [99% PF Typical] 11. High +12V Output 12. High Current Gold Plated Terminals 13. Dual Sided PCB Layout 14. Ultra Ventilation [Honeycomb Structure] 15. Multi-GPU Technologies Supported 16. All-in-One DC Cabling Design 17. Easy Swap Connector 18. Universal AC Input [Full Range] 19. 5 Years Warranty Picture of connector on cube: UPDATE: 1. November 1, 2014 (Saturday) Sent KNC support email informing them of the burnt connector and asking for official guidance/procedure. Request #35659 2. November 3, 2014 I got an email from KNC this morning. I have responded with the picture that has been uploaded in the OP.Anna (kncminer) Nov 03 11:58 Dear Marc, We had already shipped PCI-e cables. We are really sorry to hear about what happed and are going to grant you with RMA to replace the connector for you as soon as possible. Could you please send us the picture of the connector that is burnt? Thank you. Best regards | Med vänlig hälsning Anna 3. November 4, 2014 I received an update this morning. I have been authorized for an RMA. HOWEVER I must pay shipping the cube back to KNC. From Canada it costs ~$300 via FEDEX or UPS. Canadapost $150. I am disappointed that I should be responsible for paying shipping when this is a known defect with the Titan. I have asked, politely, that KNC provide me a return shipping label given the fact that this is a design flaw and no Y cable was provided as of yet. I am also worried about taxes on the way back. Since they are asking me to declare a value of $400USD I infer that they will in turn declare a non zero value when they return the fixed cube. That means I will have to pay another 15% of taxes on something I already own.Hugo (kncminer) Nov 04 09:28 Hi, We can at this stage offer you an RMA. Please put RMA-T141104-01 in large writing on the box and send the cube back to the following address: KnCMiner Birger Jarlsgatan 33 11145 Stockholm Sweden We will review the cause of the issue and get back to you as soon as possible with a replacement or a repaired cube. Please note that the shipment to us will need to be paid by the customer and we will pay for the return shipment. You should declare the value per cube at 400 USD. Thank you, Med vänlig hälsning | Best regards Hugo Svanborg Kncminer www.kncminer.comOffice: +46 8559 253 20 4. November 4, 2014 I found a cheaper option with CandaPost. 4 business days guaranteed service to Sweden. This was their cheapest option other the economy surface which has an estimated 4-6 week delivery standard. I have since paid myself for this label and have modified my request to KNC from providing return label to providing a reimbursement for $95.34CAD which is the cost of the shipping.
Update: 5. November 6, 2104 I got an answer from Keith today saying that the only way the connector burns is if I didn't follow the guidelines they suggested or that I didn't connect the cable correctly and that is what will cause 1 pin to burn. However I asked for an explanation of what I did wrong since I used:
1. 16AWG PCI-e cable was used 2. Seaonsic cables are HCS with grimped terminals to 16AWG wire (as noted in OP with description from the PSU Manufacturer) 3. I properly pushed the cables into the connectors 4. Y cables have not been received so this was impossible for me to use.
I have replied again asking for reimbursement of shipping fees and an explanation of exactly what I did wrong from their suggested guidelines.Keith (kncminer) Nov 06 09:21 Hi, Apologies for the delay in reply. We offer return shipping for components that are DOA or similar. We have provided recommendations and steps to ensure that the cubes port do not burn, they can usually only burn if the connector is not making full contact on all 6 pins as the power then only travels down a few of the pins and overloads them. We will repair/replace the cube and send it back to you in the quickest way possible. Med vänlig hälsning | Best regards Keith Gurnett Kncminer www.kncminer.comOffice: +46 8559 253 20
|
|
|
INSTAMINE! Dev talk about no ico,no ipo,no pre-mine but he forgot to set the first block reward to 0 to avoid instamine. Result? 2 wallet got half of the entire coin, probably the dev itself.
I will post this here every hour until i get banned, and after create new threads talking about this shit coin instamined,and send mail to every exchange to not add this coin, until dev will explain the huge instamine.
We have to stop this!
INSTAMINE INSTAMINE INSTAMINE
BE CARE!!!!
you can post it where you like no problem. Early miners were rewarded and that's it, get over it. and sure it will be dumped, cheap!!!...so better buy now or leave and pick another coin I personally own 9000BAD and i'm not jealous about fact that there are people who mined 50k or 100k... I personally think the compile bug was done on purpose and those who knew about it where the 2 first pools up.
|
|
|
Don't all pile on the same pool...that's not good for the coin. Share the hash www.GameofCoins.net
|
|
|
That is why I don't understand why they are willing to risk getting their asses handed to them on a plate by lawyers because of their refusal to refund on a product that can't do what was promised, when they could simply give refunds and send the unwanted Titans up to their DC and would be able to recover the manufacturing cost at the very least through mining.
Customers aren't likely to make ROI from mining with these units, but KnC most definitely could.
They have this as a solution that would relieve them of the potential risks exposing them to litigation from their current poor handling of the situation, but they appear to be determined to simply keep chanting 'no refund' and threatening forced deliveries on customers who are absolutely entitled to cancel due to the units not being what was promised in the original (and still current) sales description.
KNC is like a DONKEY they are STUPIDLY STUBBORN.
|
|
|
Well it has finally happened. The first time the pci-e cable melted on the psu and I was able to avoid RMA. This time the connector on the cube fried. One of the 6 pins is completely black and it won't power up anymore. Sent support/rma request. Your request (35659) has been received and is being reviewed by our support staff. I know KNC does not work on weekends. Will keep this thread updated with procedure and responses. EDIT: The cables used are the stock cables that come with the Seasonic x-1050. These cables are 16AWG and state they are High Current on the box. 1. 80PLUS® Gold Certified Super High Efficiency 2. Full Modular Cabling Design 3. Patented DC Connector Module with Integrated VRM [Voltage Regulator Module] 4. DC to DC Converter Design 5. Seasonic Hybrid Silent Fan Control 6. Sanyo Denki San Ace Silent Fan 7. Conductive Polymer Aluminum Solid Capacitors 8. Highly Reliable 105℃ Japanese Brand Capacitors 9. Tight Voltage Regulation [±3%] 10. Active Power Factor Correction [99% PF Typical] 11. High +12V Output 12. High Current Gold Plated Terminals 13. Dual Sided PCB Layout 14. Ultra Ventilation [Honeycomb Structure] 15. Multi-GPU Technologies Supported 16. All-in-One DC Cabling Design 17. Easy Swap Connector 18. Universal AC Input [Full Range] 19. 5 Years Warranty Picture of connector on cube: UPDATE: 1. November 1, 2014 (Saturday) Sent KNC support email informing them of the burnt connector and asking for official guidance/procedure. Request #35659 2. November 3, 2014 I got an email from KNC this morning. I have responded with the picture that has been uploaded in the OP.Anna (kncminer) Nov 03 11:58 Dear Marc, We had already shipped PCI-e cables. We are really sorry to hear about what happed and are going to grant you with RMA to replace the connector for you as soon as possible. Could you please send us the picture of the connector that is burnt? Thank you. Best regards | Med vänlig hälsning Anna 3. November 4, 2014 I received an update this morning. I have been authorized for an RMA. HOWEVER I must pay shipping the cube back to KNC. From Canada it costs ~$300 via FEDEX or UPS. Canadapost $150. I am disappointed that I should be responsible for paying shipping when this is a known defect with the Titan. I have asked, politely, that KNC provide me a return shipping label given the fact that this is a design flaw and no Y cable was provided as of yet. I am also worried about taxes on the way back. Since they are asking me to declare a value of $400USD I infer that they will in turn declare a non zero value when they return the fixed cube. That means I will have to pay another 15% of taxes on something I already own.Hugo (kncminer) Nov 04 09:28 Hi, We can at this stage offer you an RMA. Please put RMA-T141104-01 in large writing on the box and send the cube back to the following address: KnCMiner Birger Jarlsgatan 33 11145 Stockholm Sweden We will review the cause of the issue and get back to you as soon as possible with a replacement or a repaired cube. Please note that the shipment to us will need to be paid by the customer and we will pay for the return shipment. You should declare the value per cube at 400 USD. Thank you, Med vänlig hälsning | Best regards Hugo Svanborg Kncminer www.kncminer.comOffice: +46 8559 253 20 4. November 4, 2014 I found a cheaper option with CandaPost. 4 business days guaranteed service to Sweden. This was their cheapest option other the economy surface which has an estimated 4-6 week delivery standard. I have since paid myself for this label and have modified my request to KNC from providing return label to providing a reimbursement for $95.34CAD which is the cost of the shipping.
|
|
|
What is the actual power consumption at the wall with the new v1.05 firmware with 325 mhz clock rate ?
I found it to be 13.3A @ 117v = 1556.1 watts. that was with 4 cubes running @ 325mhz
|
|
|
|