No, in English) I was using translate.google.com
If you use "-allpools 1" so your DevFee mining ETH not ETC. You need to go to ethermine.org , ethpool.org,dwarfpool.com input your wallet and you will see your Fake DevFee profit.
If you can not find it so read miner logs, there you will see DevFee mining pool( 15 minutes after the start), go to that pool and see your profit.
You will see "default" or "x" or "empty" worker that is your Fake DevFee mining.

New version 3.4 is ready.

Download : https://mega.nz/#!m5s3hQDY!y-JholKyYFmghk9T0KqzhQ7sKoQkLBSQgLOMNIkYrmI
 
  Fixed issues with blocking RDP,Radmin,TeamViewer

Some users told that they have troubles with RDP, so here is version for you. I have tested, not it works.
You can use previous version if you had no troubles.

But in this case you need to place all data from NoFee zip to miner folder. I think it is not so difficult to use arguments

Yes, but only with x64

Hello, I want to make The Best Mining Pool  
I do not know what type of payout system I have to use.
Could you write what types of payout system exists and and what is the best and why?
What payout system you want to see at the mining pool?
Write the advantages and disadvantages of payout it please.
Describe the principle of payout system briefly.
Thanks in advance.
PS.

Hi,
 I change wallet when Claymore's miner sends it to the pool on its way.
 The length of Ethereum address is 42 symbols, the length of bitcoin address is 34 symbols. So even if I modify Ethereum to Bitcoin and make TCP packet shorter it will be sent to pool, but Claymore's miner will not accept the answer from that pool during this session. It is not Claymore's protection it is the basis of TCP networking. It is like miner and pool write one sentence.
Example:  Miner send: "Hello"   "I am ready"                        ........
                Pool send:         "Hi"               "Here is your work"       ........
 So pool sends "Hi" with offset of 5 symbols. And miner is waiting for a response with offset of 5 symbols.
 When I change the length to 15 symbols (modify "Hello" to "Hello Dear Pool") so pool will answer with offset of 15 symbols but miner is waiting offset of 5 symbols and it will not accept offset of 15 symbols.
Example:  You send:   "Hello"                  WTF? Why the offset is not = 5??? I will not accept it!         
               I modify:   "Hello Dear Pool"
               Pool send:                        "Hi"

So, if you use nicehash, the main work will go to you, but DevFee can go only to Ethereum wallet. So create you ethreum wallet (you can use BTC-e or Poloniex) and use
 "Nicehash:      start NoFee.exe 0xEthereumWallet allpools"
So if will be like that
Example:  You send:   "Hello"  "I am ready"                         ........
               I modify:   "HiHii"
               Pool send:         "Hi"               "Here is your work"        ........

Hope you understan what I mean. You can mine to your Bitcoin walllet and your Ethereum wallet simultaneously or to your Bitcoin walllet and Developers Ethereum wallet without NoFee.exe. I can change data inside the TCP packet without changing its length. Each Ethereum address has length of 42 symbols so I chan change it. When you use nicehash, DevFee mine ethereum at the another pool, so I can change DevFee Ethereum wallet.

Ok, I will add timeout argument. So you will be able to change it from console

I have made another program that mine devFee to your wallet without restarting a miner and it is not a proxy.
Here: https://bitcointalk.org/index.php?topic=1792180.0

I will implement nicehash today in v3.3


For you  it is not reasonable, maybe. But if person have 100 GPUs it is very resonable. And please do not think I am a bad person, I give the choice to people. If you want you can donate to Miner Developer. Have you ever used "AdBlock Plus" so it is like that.

I do not have nicehash account. Can anyone give me settings for miner to start mine at nicehash? I need it for developing this program.

I had the same problem. I have changed cheap gray risers to USB3.0 Risers with additional power and it works now.

New version 3.2 is ready.

Download : https://mega.nz/#!X9cmkIpT!Eq_Ki6ChBpU9S8Fd9BbKzyqpTCcYhySaZ8nqJd-M9Qo
Changelog:
 +Now works with all pools (tested).
 +Slightly improved stability. 
 +Archive type changed from .rar to .zip (Now you can use internal windows .zip archiver)

I am going to do it, even with Viber and Telegram notifications. But I want to make great web design with all 2017 innovations.(I am looking for a web designer now). I design the site layout now.  And then I will make mining pool with 0.1-0.2% fee.

Ok, I will try. Now I am making ZCash noFee, after that I will try to add btc

You are a starnge person. I have told earlier you can use Wireshark(https://www.wireshark.org) to inspect TCP packages and you will SEE that it is clear, and all profit goes to you. Or you are a greedy person that does not make software for free,and does not believe that other  people can do this? You can scan it with antivirus of you want. You can read my previous topics and you will see the the I do not write viruses. I put knowledge too. But I make if for free. You can contact me in polite form via PM and I will tell you how does it works.

You can contact me via PM and I will answer your questions. I do not want to share source because miner developer can read and replace something so it will not work.

When you use etc+sia only etc devFee will go to you. When you use etc+sia devFee is 2% so you will get 2% of etc to you and 2% of sia to Claymore. If this topic will be popular I will make for sia too.


Hmm. It works only with Claymore ethereum miner only with ethereum wallets.

"NoFee.exe 0xaddress 9999" for ETH nanopool.
"NoFee.exe 0xaddress 19999" for ETC nanopool.
Do not forget to run as admininstartor you NoFee program (Right Click at NoFee.exe->Properties -> Compatibility tab->Run As Administator -> Save)

I have fixed troubles with ethpool and ethermine. So I will update soon.


If Claymore will not make his mining software no one will get it, and all people will have lower hashrate and it will be ok. But if you have a 100 GPUs you will get more profit(~33 usd)!

Hi. You can read my previous topics and see that it is not a virus. However, you can use Wireshark program and see that it works as i told. You can set another wallet and see that profit goes toyou. And I made this program for me,at first. I do not ask you to use it. You can download it when I will be Legendary)

Hello,
I have spent a couple of months and now I am ready to post new version.
It is very easy to use! You need to run it at the same RIG that works.

Linux version: https://bitcointalk.org/index.php?topic=1987228

WHAT IS IT?

This program helps you to save you your money and earn more when you use Claymore's Dual Ethereum
Miner. It reduses 1%(or 2% in Dual mode) fee.
DevFee will mine to your wallet but miner wil think that it mines Real DevFee.
It was tested on Windows 10 and Windows 7!
Where to Download?

[02.2020]v15.0: https://www.mediafire.com/file/pcs3jjv8b1dh22a/NoDevFee15.zip


How to Use?

1) Download NoDevFee15.0.zip
2) Right Click at ZeroFee.exe->Properties -> Compatibility tab->Run As Administator -> Save
3) Open ZeroFee.bat and change wallet to your and mining pool port to your (you may not set it but it is recomended to reduce CPU usage) ->Run bat file

Stability


It was tested with nanopool.org etheremine.org ethpool.org it works perfect.
(I have additional 1.8mhs to my 176mhs with this software and)
You can test it with other pools and tell results here.

Why do you need it

I have 7 GPUs and nanopool shows me that I will get additional 1.975 USD/mo (and 3.95$ when I use dualmining with sia coin).
Updated Proof :

Examples

 Example:       Youtube video


Link: https://youtu.be/45g6rcXlzxs
Video tutorial contains:
 +How to setup
 +Stability test
 +Additional mhs at the pool

v15.0
 Now works with Claymore v15.0 [img proof: https://bitcointalk.org/index.php?topic=1792180.msg53839085#msg53839085]http://Fixed compatibility with ethermine.org
 Code improvements
 New Logo

v8.0
 TCP packets checking speed is improved (checking function is replaced with assembly code to speed up checking)
 Fixed bug with automatic adding to startup(automatic adding to startup feature is deleted).
 New Logo

v7.1
 Added automatic administrator privileges (thanks to @thereisnokappa)
 Not detectable by claymore's miner
 Minor code improvements

v7.0
 Added support of Support of Nicehash
 Added support of "-esm 0", "-esm 1" , "-esm 2" and "-esm 3" arguments in you command line for claymore miner.
 Optimized allocation of memory
 New protection against Claymore miner detection
 You do not need to enter mining pool port in this version only wallet
 File structure optimization

v5.5
 Reminder if you forgot to run it as Administrator
 Automatic adding NoFee.bat to the startup
 Design changes

v5.0:
 Works now even with Claymore Miner v9.4
 Major speed improvements
 Less CPU load
 Some bug fixes

v3.4:
 Fixed issues with blocking RDP,Radmin,TeamViewer

v3.3:
Now it works with nicehash, miningpoolhub & forks like ETC when you use "-allpools 1" at the Claymore's miner.
Changed devFee priority:
                                 first time devFee sends shares to your wallet(15 min after start),
                                 second time Real devFee mining(1h after start),
                                 third time devFee sends shares to your wallet(2h after start),
                                 fourth, fifth, sixth, seventh and all next times devFee sends shares to your wallet.
How to use it with nicehash: https://bitcointalk.org/index.php?topic=1792180.msg17894183#msg17894183

v3.2:
Now it works with all pools (tested). Slightly improved stability.  Archive type changed from .rar to .zip

----------------TROUBLESHOOTING-------------------

If this software stops working like this:


Try to install all
microsoft c++ 2010 redistributable
https://download.microsoft.com/download/3/2/2/3224B87F-CFA0-4E70-BDA3-3DE650EFEBA5/vcredist_x64.exe
microsoft c++ 2012 redistributable
http://download.microsoft.com/download/1/6/B/16B06F60-3B20-4FF2-B699-5E9B7962F9AE/VSU3/vcredist_x64.exe
microsoft c++ 2013 redistributable
http://download.microsoft.com/download/2/E/6/2E61CFA4-993B-4DD4-91DA-3737CD5CD6E3/vcredist_x64.exe

And then REBOOT your mining PC

If you have low hashrate ( < 200mhs) PLEASE read this message (https://bitcointalk.org/index.php?topic=1792180.msg20469367#msg20469367)

Hmm, why?
I have made bios mod and 950mv core voltage.
If you do not want to make bois mod so I recomend you to set more then 950mv to a  maximum core clock ( I have set 950mv to 1100mhz, 940mv to 1000mhz)
And do not forget to set power limit in MSI afterburner

I have one rig with 6 MSI RX 470. They all had different core voltage from 1000mv to 1150 mv. I have set all GPUs to 950mv in amd radeon WattMan settings. Seems it is ok.