|
cool coin, excellent developer, success and prosperity of the project
|
|
|
|
спамить надо меньше!
Ты читать умеешь  Написано же "меня взломали" |
|
|
|
Good Morning,
is there anybody who knows, why the wallet stopps syncing at block 10766?
The malfunctions is present since 3 days.
Thanks for any answer.
update your wallet thanks, i thought i already had the newest, but you were right, now sync is complete. Only the virus warning, but i hope it is a false positive ... I have nod32 and he does not swear |
|
|
|
Good Morning,
is there anybody who knows, why the wallet stopps syncing at block 10766?
The malfunctions is present since 3 days.
Thanks for any answer.
update your wallet |
|
|
|
No confirmation for hours a31cfdbb99da3dcdc6c903cffe2f147c3f1a02669b34c87efcdca7d0df6f55e4 No solutions  Please on your TX very small commission, TX sent to the network, all that I could do. It remains only to wait |
|
|
|
Ну просто так банить не будут, я думаю, значит какая то причина есть.Одна из них, не соблюдения правил.
угу, меня взломали. сделали 6 постов со спомом на вирус ссылки. Все, аста лависта беби. Аккаунта в режиме чтения, зайти могу, пароль я успел поменять, а теперь только брать бубен и вокруг костра танцевать и то не факт, что поможет. доказать что это не ты спамил не возможно |
|
|
|
a31cfdbb99da3dcdc6c903cffe2f147c3f1a02669b34c87efcdca7d0df6f55e4 Please  .I really need help waiting c12a275edfcaa667199932d9b571c9151998a11fd5671c5f4a83e5f4f3db7ffc
please!!!!
confirmed, tips are welcome |
|
|
|
rather than easier through the Nvidia Inspector to each map to specify overclocking, click create shortcut in the management of the PC to create a task at the event of turning on the PC, at the system event the display 4101 run the program and specify the path to the created shortcut, on the inspector's shortcut, click the properties and copy the line with the specified overclock, insert it into the command line parameters for the reboot https://drive.google.com/open?id=1kybjARQwhTlOhPmWUVT8Inoy_6NZfYRw |
|
|
|
|
joined, good luck to the developer
|
|
|
|
|
ребят, доброго времени суток, вот я поставил себе кошелек, включил добычу на пуле. понятно что монетки перешлют а кошелек, вопрос в другом где будет обмен, на какой бирже? и главное когда?
|
|
|
|
Dmitry Marinichev
I'm from Russia and five-six months ago I read news about a new co-processor for mining, which is developed by this person's laboratory, is twice as powerful as Intel's latest development. also this person is the owner of a large knowledge with a large number of farms and asics, the second floor of the building is assigned to the laboratory for the development of the Russian mining turnover. He is also an Internet ombudsman who promotes mining in Russia So at least one of the members is possibly trustworthy, right? Yes it is, I read about it for a long time. he has his own page, where the addresses of the mail are indicated for communication with him. |
|
|
|
|
I will join and I to this mining while the people are not very much
|
|
|
|
|
I will join and I to this mining while the people are not very much
|
|
|
|
4G is enabled and I have tried gen1,2 and 3.
2 gtx 1070 and 3 1060. My psu should be plenty of power for those.
Put first one graphics card in the motherboard, install drivers on it. go into the bios, turn on gen2 and above 4G turn off the PC, add one more card and turn on the PC wait until the map is established. again turn off and add the following try one by one to add |
|
|
|
What is the command to single out a single GPU on Excavator, i found it does Neoscrypt 2x higher than my ccminer, so wanted to use it as part of profit switching, but want to be able to specify which GPU's to use it on only like i do on ccminer (-d 1) in command line
--cuda 0 1 2 |
|
|
|
hsrminer_neoscrypt_test.exe -a neoscrypt -o stratum+tcp://hub.miningpoolhub.com:17012 -u Zackdaystar.miner1 -p x that's how it should look like And it runs, but the efficiency ultimately ends up at just under 20% I'm currently using fork version and excavator, they are faster and more stable We are waiting for a response from the dev that he will respond to these miners |
|
|
|
Ive been running my GTX 1080 for over a year with +20% power/+100/+1000 mining equihash. It mines a good 20 hours out of the day, I only shut it of in the evenings if I am on the computer. So far I have seen no issues whatsoever with running it this hard. I also have 1070s running like this for over a year as well so I wouldnt think you would cause any damage as long as you keep temperatures in check.
I know when you set at +20% the card becomes hot and you'll smell something like melting plastic or rubber, especially if you're mining Ethereum. So, if I overclock all my graphics cards will they not be damaged? Well, you know graphics cards nowadays are too expensive and hard to find. Also, may I know the required or safe temperature (°C) for the CPU and graphics card? I have a maximum of 75°C, more than a year in this mode Wow! What about the CPU, is it also 75°C? I'm using Intel Core i7 and once it reaches over 60°C I immediately set the CPU core to 3. So, running all my cards over 60°C would be safe enough. Thank you. My cpu have 60-65°C i5-7700, on here mining yescrypt on 3 cores |
|
|
|
Ive been running my GTX 1080 for over a year with +20% power/+100/+1000 mining equihash. It mines a good 20 hours out of the day, I only shut it of in the evenings if I am on the computer. So far I have seen no issues whatsoever with running it this hard. I also have 1070s running like this for over a year as well so I wouldnt think you would cause any damage as long as you keep temperatures in check.
I know when you set at +20% the card becomes hot and you'll smell something like melting plastic or rubber, especially if you're mining Ethereum. So, if I overclock all my graphics cards will they not be damaged? Well, you know graphics cards nowadays are too expensive and hard to find. Also, may I know the required or safe temperature (°C) for the CPU and graphics card? I have a maximum of 75°C, more than a year in this mode |
|
|
|
ребят, вы реально думаете что можно восстановить я очень сомневаюсь в этом. модераторы могут блокировать, но вот разлочить может лишь админ, и ни один ни второй не отвечают никому, скорее всего они просто забили технично на лоченные аккаунты, типа борьба со спамерами. Создайте новый акк и не партесь, старый вы уже все равно не вернете, где-то на глаза попадалась тема что можно купить себе медный статус (ну или как-то так переводил гугл), но если будет с вашего акка спам, вас заблокируют и то что вы платили вам не поможет. В МЕТА видел сообщение от парня, так он еще и умудрился заплатить форуму, и тоже молчание, там же есть парень который готов заплатить 1 биток за разлочку акка, как думаете сколько он ждет? два месяца!!! да за два месяца я новый акк успею немного поднять Это абсолютно не нормально, когда ты не нарушая правил форума, просто сбросил себе пароль и потерял аккаунт на всегда! В первый раз встречаюсь с такой проблемой, ни на одном сайте форуме или почте, даже с миллионной аудиторией такого не было! Это же мой аккаунт он не угнанный, могу легко это доказать. Спамов и других нарушений не было! если ты сможешь это сделать и восстановить свой доступ то значит для этого форума еще не все потеряно и я тогда возьму свои слова обратно о том что админы на все забили У меня всё получилось. что ж, мои поздравления. а я все еще заблокирован |
|
|
|
|
I'll tell you how it was with me - after updating the win 10 I could not go to the rig neither through the radmin nor through the rms
so I had to roll back the system, black screen and could transfer files, the control mode did not work.
but in the license of Win 10 it is said that it is updated itself, but I would not like it. I found an option how to nail the update system
Open the command line as an administrator and follow these two commands sequentially:
takeown /f "%windir%\System32\UsoClient.exe" /a
then
icacls "%windir%\System32\UsoClient.exe" /inheritance:r /remove "Administrators" "Authenticated Users" "Users" "System"
The first command will change the access rights to the UsoClient.exe file that manages the update procedure, the second command will remove the inherited file system permissions for the specified groups. Thus, no one will be able to run the UsoClient.exe file, therefore, the automatic updating of Windows 10 will not be performed. You can verify this yourself by trying to run the UsoClient.exe file from the System32 directory.
then went to the control panel - the scheduler - the library - microsoft - windows - windowsupdate
and deleted all rules created there
windows 10 no longer requests updates
|
|
|
|
|
Show Posts
