Beh ma non potete mica aspettarvi risalite continue, bisogna anche pensare che c'e gente che batte cassa per vari motivi, oltre agli speculatori abituali. Quello che invece è interessante è come a differenza di anni fa, quando qualcuno dumpa sembrerebbe che ci sia sempre una domanda abbastanza elevata da non permettere una discesa troppo ampia.
|
|
|
I am under the impression that Poloniex is a Ponzi using you to generate mountains of transactions for himself, or the equivalent, coded by this one guy.
LOL Well i tell you a secret : i'm satoshi nakamoto.
|
|
|
There's a BIG Problem on C-CEX : Api Responses Attributes are Broken. TL;DR : you can't use C-CEX API.
So i have 2 solution : - First is to contact Dev (and i'm going do to thaT). - Second is to Change C-CEX API TRADES Routine to works with plan B (Plan B is when trades are created using current order qty instead of call MyTrade API).
In both CASES, you can't use c-CEX-
I will update you about that.....
Good luck with that... With recent accusation's I don't believe he'll be working on anything API related... Well that sucks -_- Oh no problem, i know c-cex dev, and we already make a system test : i need to switch to Second Solution,
|
|
|
2017-03-04 09:49:39| OCR : Try To Create new Order (From GUI) PING : BUY 0.30423445@0.00315035 (Dynamic) 2017-03-04 09:49:43| OCR : Order Successfully Created Dynamic-PING-100001109473420 : BUY 0.30423445@0.00315035 Current 0.30423445 2017-03-04 09:50:07| PPA : Lookup 1929 Start. Update Market Orders,My Orders,My Trades. First Markets Checks Are Ok. Current Personal Last Prices : S:0.00324577 S_PI:N/A S_PO:0.00324577 B:0.00315035 B_PI:0.00315035 B_PO:N/A Best Market Prices : S:0.0031636/B:0.00315034 Current Orders/Trades : 1 Ping, 0 Pong, 0 Trades From Ping, 0 Orders To Restore, Pool Values : Buy 0.00191595/Sell 0.00000000 2017-03-04 09:50:07| PPO : Dynamic-PING-100001109473420 : BUY 0.30423445@0.00315035 Current 0.30423445 First Order Synch Call(Attempt 1) - Synch Successful! 2017-03-04 09:50:47| PPA : Lookup 1930 Start. Update Market Orders,My Orders,My Trades. Personal/Market Stats are the same as Previous Lookup 2017-03-04 09:50:47| OCR : Try To Create new Order (From Pool) PING : BUY 0.60817052@0.00315035 (Dynamic) 2017-03-04 09:50:50| OCR : Create Order (From Pool) Error From YoBit : Insufficient funds in wallet of the second currency of the pair What does it mean: Insufficient funds in wallet of the second currency of the pair well this is a message from yobit.....BUY.... so you don't have the <PartnerCurrency>, it's a BTC Market?
|
|
|
Transazione Inesistente. Butta Multibit che è diventato una merda, usa Electrum.
|
|
|
2 Days to the End
|
|
|
today the same with CAT 4.8 seems frozen since on all exchanges complete GUI inaccessible again only minimize/maximize or kill possible java.lang.InterruptedException at java.util.concurrent.locks.AbstractQueuedSynchronizer.doAcquireNanos(AbstractQueuedSynchronizer.java:936) at java.util.concurrent.locks.AbstractQueuedSynchronizer.tryAcquireNanos(AbstractQueuedSynchronizer.java:1247) at java.util.concurrent.locks.ReentrantLock.tryLock(ReentrantLock.java:442) at CAT.C_Env_Market.A_Managers.a.run(Unknown Source) at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511) at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:308) at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$301(ScheduledThreadPoolExecutor.java:180) at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:294) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617) at java.lang.Thread.run(Thread.java:745) java.lang.InterruptedException at java.util.concurrent.locks.AbstractQueuedSynchronizer.doAcquireNanos(AbstractQueuedSynchronizer.java:936) at java.util.concurrent.locks.AbstractQueuedSynchronizer.tryAcquireNanos(AbstractQueuedSynchronizer.java:1247) at java.util.concurrent.locks.ReentrantLock.tryLock(ReentrantLock.java:442) at CAT.C_Env_Market.A_Managers.a.run(Unknown Source) at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511) at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:308) This is something that is happening only on your machine. Nobody have the same problem, yesterday i look for something for about 1 hours, and i haven't found any solution. Why don't you use a windows machine ? Otherwise, i need you to perform these tasks : - Start 4.8 in a folder without other logs (so you'll be sure that all logs are from 4.8 and from that precise run). - Wait for this problem A question : did you perform some XLM load file or some action before getting these errors? Or CAT start write error without any reason?
|
|
|
I have stored the settings in a preset. If I select my preset, do I need to click update or not?
I would suggest if used settings and shown settings are different, or otherwise said, if we need to click the update button, can you make it flashing?
Rule about Parameter is simple : CAT will never change your current parameters if you don't click on the Update Button. So if you want to put current GUI parameters into current parameters you need to click on update button.I'm still thinking about the best way to give a message to the user. Something like "Current parameters are different from running parameters", but my solution is something complex i need to think about.
|
|
|
I am not sure if we can improve here something.
When I start an exchange, I get first the actual Markets list. Here I click twice on Sell Trades 24H to see the ordered list of most trading. Then I look down where it is more equal between Sell and Trade, because, I don't want to stuck with that coin. If I find something that has nearly equal trades I look up the closest coin I have already a balance. I use this coin for trading. However, if that coin has only a un-tradeable balance, then I ignore that one and choose another one.
Coins with balance are gray shown. Could we change that to two colors, reflecting if the balance is high enough for selling or not?
I could think about change color and set green = available balance to create orders and yellow = available under the min order amount requested
|
|
|
Poloniex Log window shows:
2017-03-03 12:04:56| {"error":"Nonce must be greater than 1498350681964134. You provided 1488513673200."}
That's ok, CAT is able to get 1498350681964134, and set it as nounce. Always discard this message.
|
|
|
To be more clear :
2 Example :
That was my order ID 29445678 Order was filled, but MyTrade response is :
[{"tradeid":"2501jcsh","tradetype":"Buy","datetime":"2017-03-03 02:04:35","marketid":"JCSH-BTC","tradeprice":"0.00000080","quantity":"1027.91250000","fee":"0.00000164","total":"0.00082233","initiate_ordertype":"Sell","order_id":"38263"}]
Or another order :
Order ID 29445635 "tradeid":"5972ntcc","tradetype":"Buy","datetime":"2017-03-03 02:03:52","marketid":"NTCC-BTC","tradeprice":"0.00000356","quantity":"199.43820225","fee":"0.00000142","total":"0.00071000","initiate_ordertype":"Sell","order_id":"38263"}]}
Same Order_id for 2 trades on 2 different markets and orderId are completedly different from the original OrderId (29445678 VS 38263 and 29445635 VS 38263)
Result : DEATH ORDER -> ZOMBIE STATUS
|
|
|
There's a BIG Problem on C-CEX : Api Responses Attributes are Broken. TL;DR : you can't use C-CEX API.
So i have 2 solution : - First is to contact Dev (and i'm going do to thaT). - Second is to Change C-CEX API TRADES Routine to works with plan B (Plan B is when trades are created using current order qty instead of call MyTrade API).
In both CASES, you can't use c-CEX-
I will update you about that.....
|
|
|
Hi, yes i've added this message. No problem with this log, only errors from the GUI not from the ping-pong
|
|
|
You should know that without error log i'm not able to trace anything. Please send me the error log.
which error log? there are xxx error logs in x exchanges directories... CAT_LOG in CATSystem folder (Root) if there's any. CONSOLE_LOG (in ExchangeLogs folder) CAT_LOG in CATSystem folder is 8,8 MB in ExchangeLogs folder are only *COIN*__BTC_ERROR_LOG_2017-0x-...txt GENERAL_ERROR_LOG_2017-0x-...txt GENERAL_API_LOG_2017-0x-...txt all the answer will be in that 8,8 MB
|
|
|
You should know that without error log i'm not able to trace anything. Please send me the error log.
which error log? there are xxx error logs in x exchanges directories... CAT_LOG in CATSystem folder (Root) if there's any. CONSOLE_LOG (in ExchangeLogs folder)
|
|
|
You should know that without error log i'm not able to trace anything. Please send me the error log.
|
|
|
Thanks Woshib for your Kindly Translation. This is an authorized official C.A.T. topic. For any question in French you can contact Woshib, i am able to speak Italian (because it's my language), English (without problems) and Understand French (But not speak)
|
|
|
4 Days to the end
|
|
|
Do you think this could possibly cause a corrupted wallet, also did you know if you can import an encrypted private key into electrum??
No, it is not about corrupted wallet, because i also export the private key and import in a new wallet. Same problem. It's a problem on single transaction verification. An enormous bug that systematically occurs on my transactions. From my point of view, this kind of error could also makes you decide to change wallet and never come back from your decision. I'm not sure about the encrypted key into electrum, i imported the plain private key into alectrum.
|
|
|
find 3 ref and you will get a copy. It's one of the rules.
|
|
|
|