Anyone with an order that's shipped already wont have the stand, you can get it printed near you for very cheap on some place like 3dhubs.com .


Again if you have a high shelf or table, you wont need either nuts or stands.

To replace the two stacks of three nuts in the photos on the website.

If you have a high shelf or table, you wont need either.

Good news is I won't run out of LCDs for a while, bad news is I have only got 2 wifi modules (was ordering lots of batches of 2 to avoid shipping). I need the batch of 40 to arrive. I got another soldering iron yesterday so I'm back building the bits I can. Ordered a good Hakko iron that I should get at the end of the week, the cheap one will just be backup.


I got an email from my 3d printing guy the next batch of those parts are in. I also have him printing some stands to prop up the front.

All orders have shipped out, had a little hiccup last night when my soldering iron broke    

I hit it on the table in frustration and it started working again, crisis averted  

I will be off to the shops this weekend to get a new one.

No more WIFI boards have arrived yet, I had hoped a few might be in the mail so I could get started building the next batch, no such luck.

Also had good news from two customers, they received there devices today!


PS: Blazed I have redone the shipping calcs to the US using Express Post International with two different box sizes the existing methods of sending 2 and 3 devices are included for comparison, the figure at the bottom in each tab in USD is shipping per device.


Think its just expensive from AUS

no problem

Shipping is ~120 USD for same service for 10 to you 1.5kg $530 AUD insurance.

50/50 split green/blue to make maths easy


38*10 + 120 = 500  USD

This comes with a wait on parts though (est 2 weeks), your order is ready to go out in 12 hours.

Also there is risk you will be charged some sort of electronics import tax, I usually write digital clock on the description. Two devices price will be small, lots of device $$$

Guy from reddit payed 0.20 USD import tax for 2 devices was Turkey though

working with this

Express Courier International Platinum 1-2 business days

15 devices at 0.15 kg each (~2.25 kg total) is 173.7 AUD to send with 800 AUD insurance.


Works out to 8.63 USD shipping per device using xe.com now.


Best thing is Delivery time estimate: 1-2 business days

Not 3-10 days.

I just ran the calcs, my average price for shipping is 23 AUD, at the moment that its 17.10 USD on xe.com.

I add a small bit for currency fluctuations and you can never find this good a rate.


If you want to order three when I open the site again, got for it ill just bubble wrap them and put in padded bag (no box).

Warning though, the insurance only covers 100 AUD, two device is already ~105 AUD.

Also two devices is already ~300 grams the padded bag has max 500 grams, so probably cant do four.


Edit: Just tried pack and sends website they wanted to charge me more for budget then express

I'm shipping all orders that have been currently placed, tomorrow.

Completely out of the WiFi board now though. Will be a week or so before I get a new shipment.

Group buy is fine, just may take a while to get parts and build lots, the larger the buy the longer it will take.

Yep, I send registered post international, will be 3 days till I send next batch. I will email tracking number then.



Edit: Just put the site to out of stock, still waiting on some more WIFI circuit boards.

        Don't want to get heaps of orders when I am asleep, that I cant build

Australia

Added,the price is coming from coinbase and bitcoinaverage as well, with such a large value it fills the entire 16 characters on the top line.
If the BTC price triples you will lose the R from PKR.  (I could fix this when it happens though, patch the server to drop the cents)



I would prefer if you buy through the website, if you are buying two add both to the cart and then you will only pay shipping once.
I suggest one of each color.
Bitcoin is available through the coinpayments.net  button.
here is my ebay if this makes you feel better about trusting me

Though if you organized/pay for a escrow I would be fine with it.

yep, pm sent, yes nodeMCU


I also have code here somewhere to turn it in to a simple NTP clock (no prices), but its hard coded to UTC +10.

Timezones, daylight savings etc suck, this is why it will probably never have a time option, unless someone can find me http://time.is but with a API.

If its not in here, message me and ill see if I can add it.



Also all the exchanges, prices and what is on where are listed in this json call here

prebuilt, plug it in follow the guide

Its not a RPI, it is ESP8266 chip with LUA code.

If you know LUA or use a bit of google fu you could add sound buzzers, temperature sensors and other things.

There is quite a few GPIO (like 5) left on the chip and one Analog input/output.

nope, select the color when you purchase, multi color screens are too expensive and don't look as good.

A Red text on black background screen was asked for by a customer, it was going to add ~15 USD to the price.

White on black and black on white would be ~3 USD more, but look boring so I don't buy these.

The endpoint is averaged prices from my site - though you are welcome to build your own endpoint and re-point your device.

45 minutes  - though that's with every part required there in front of you, some parts take a long time to arrive, some parts need to be ordered in bulk.

one of each color, though have ~10 partially made.


heres a link to reddit where my first customer posted

guys, once you add to the cart you can see shipping costs. thanks

I am making them my self.

dogecoindark -> VERGE

realized that TIPS had the wrong logo so i fixed it.

any chance Yobit has a api?

Edit: dw found it



hmm there's no way to get all the price data at once......

Cryptopia added