|
The reason is big time hashers (usually rented hashrates) who come in and out multiple times daily, effectively increasing difficulty and hashrate.
So your revenue drops eventually. do not expect what you earned 1 month back. That time is gone.
|
|
|
|
|
yes gurgelkoff.
1150/850mv 2150/850mv
core clock/ voltage for core clock then mem clock /voltage for mem
thats pretty much it.
|
|
|
|
|
Do you really want more than 14hash on the rx560??
|
|
|
|
|
asus 1060 3gb dual Mine are running for months with 60% TDP, +100 clock, +380 mem (it is Hynix)
fan is at 50% and temp are around 50-51C which is good for me.
It can probably do a bit more but I like to play safe +my electricity is costly.
p.s. this card is crap on ETH (and crap as a whole for mining but that`s another story) so don't even try it on ETH.
Go for equihash and other algos.
|
|
|
|
|
If its single mining ETH, why now...even lower.
|
|
|
|
Price is decent for selling  |
|
|
|
|
ccminer-klaust seems to have very good results. Play with the Intensity , may be you can get some better numbers and stable mining on your GPUs.
|
|
|
|
|
Try with the AUG drivers the beta.
|
|
|
|
|
Thank you. Appreciate the answer.
Will see if I can find time to play around with it.
|
|
|
|
|
And what would be best for core OC for neoscrypt?
Seems my equihash and cryptonight setting of TDP 60 or 55 , +100 core (and even +80) crashes on the 1060 3gb and 6 gb when on neoscrypt.
Thanks.
|
|
|
|
|
I would guess - not enough power to properly run the GPUs at max load.
Cryptonight uses less power vs ETH. That may explain why it works on Cryptonight without issues.
Yes, you may have 3000 Watss in total PSU power, but you also have a nice mish-mash by that mix of few PSUs and 10 GPUs.
For starters try MB+ few raisers + few GPUs on the same 1200 PSU. Do some math, leave 20% free capacity.
The rest on the second 1200 PSU , and may be 2 GPUs + raisers on the 3rd smaller PSU.
Check how much each GPU consumes on max, etc. Eventually you can figure it out and be careful.
|
|
|
|
|
Keep it coming. Great job.
|
|
|
|
|
Check previous page, notbatman has given the straps for different memory types.
Put on strap 2000 only, update bios. Oc memory to 1940 if you want and test.
|
|
|
|
|
Gabryrox go check your outlets vs breakers.
See how many breakers you got and on which sockets.
Easiest way switch off breaker and see which outlets stop.
Room breakers are usually 15a in USA. x120 volt = 1800 watts.
Safe is around 1500 watt constant usage. More you risk.
So for example
3 breakers for 3 rooms. Sometimes two rooms can be on 1 breaker, etc.
Total max good use is 3 x1500. You get the idea.
And of course make sure there to account for any other devices on those breakers like TV, etc.
Appliances like fridge, washer drier usually have their own breakers.
Driers are 220v most 9f the time and have bigger output but you need electrician if you want to use the 220v.
Consider electrician if unsure to be safe.
|
|
|
|
|
For Ethereum
Asus 1060 3gb with hynix gives a proxy 17-18, so yours 22 is more or less OK.
That's micron hashes usually. May be you can push to 23 24 with samsung.
You won't be able to hit 29 with 1060 3gb. This hashrate 29-30 is for 1070s.
Hynix is OK memory but on ati where you can mod bios. On nvidia it's locked so we are stuck with whatever memory straps are set by the manufacturer.
Example my hynix ati 570 can do 29, my asus 3gb 1060 only 18.
|
|
|
|
|
I was wondering the same. Which straps for Samsung?
I tried 1750 as suggested and it does not produce best results. Only 26 mh/s maximum.
For comparison my Hynix ones, with 1500 strap produce 28- 28.5 mhs.
Should I use 1500 strap for the Samsung too?
|
|
|
|
|
Show Posts
