Tu parli di aggiornamento software della scheda in base a quello che mini? Oppure sono aggiornamenti software della scheda stessa? Grazie
Mi sa' che con aggiornare le schede, intendeva dirti, che dopo certo tempo ti conviene a cambiare le schede con un modello piú recente.
|
|
|
I noticed a higher Total speed in Claymore v11.2 of about 1mh/s. I'm mining with 3x rx480 + 3x rx580 in that rig. It's not that much, but 1mh/s for free is nice too
|
|
|
If you have connected all as in the picture you have posted: -Power only 1 gpu with 1 pcie cable from the psu -Try to use only 1 sata cable for 1 riser or if you have enough free pcie cables, connect the riser without the 6pin to sata adapter
The first statement wont help him. - Read his setup: CASE 2, he already tried all the three PSUs with one card and it's working.
@Eronimo You might want to tell us the PSU's brand and model. I wanted to say, he should not power 2 gpu's with only 1 pcie cable coming from the psu, look his cable managment in the picture he uploaded ;-)
|
|
|
Hi guys, I’m trying to build a rig and I’m on a point where i am very confused. This is the setup for my rig: https://imgur.com/a/i8cwAThe PSU´s on the pic from left to right: 1-3 My setup: 3x 750w PSU 6x AMD R9 290 1x Mainboard: HM 76-65 BTCcombo 6x Riser (6 Pin to SATA) CASE 1: CHECK When i start my rig with only 1 psu (psu 1) everything works fine. The psu consumes 600 W and powers the mobo + 2 cards + and 2 riser. I can mine with this setup so everything so good so far. CASE 2: CHECK Now if i connect the other two PSU`S (psu 2 and psu 3) with ONLY ONE CARD, So that totally 4 cards are connected and running: PSU 1: 2 cards + mobo + 2 risers PSU 2: 1 card + 1 riser PSU 3: 1 card + 1 riser This Setup although works fine and i have no problem with the rig. The troubles come up with card no. 5 and 6. CASE 3: Problematically PSU 1: 2 cards + mobo + 2 risers PSU 2: 2 cards + 2 risers PSU 3: 1 card + 1 riser If i connect now another card to psu 2 or 3 and start mining, psu (2 or 3) gets under load and i can see how a random gpu fan stopps working, a few secons after that the PSU shut completly down. Sometime before i started testing it again i saw the GPU Fans of one of them was still spinning even when the PSU was already power off. I thought the issue would be of some power consumption. So i started testing it with a power consumption meter: GPU: 250w Riser: 50w Combined: stable 300w Combined: 2 GPU 2 Riser = 600w Realy strange is when i put the mobo on this psu the power consumption is still 600w . So i start testing the PSU who is running without the mainboard and shut downs on mining. The PSU reaching exact 600w before they shut down. CASE 4: Same as 3 PSU 1: 2 cards + mobo + 4 risers PSU 2: 2 cards Nothing changed same result like case 3. To combine all 3 PSUs iam using: https://i.ebayimg.com/images/g/0X0AAOSwQwZags8j/s-l300.jpgHas anyone an idea what i am doing wrong? If you have connected all as in the picture you have posted: -Power only 1 gpu with 1 pcie cable from the psu -Try to use only 1 sata cable for 1 riser or if you have enough free pcie cables, connect the riser without the 6pin to sata adapter
|
|
|
Ho cercato qui sul forum, ma non ho trovato molte info. Vorrei sapere le caratteristiche e che vantaggi ci possono essere. Io al momento ho un rig con 4 RX 570 ethOS che minano ethereum a 105 MH/s con un consumo di circa 490w alla presa.
Vantaggi: + stai minando un secondo coin Svantaggi: - le schede consumano piú watt - le schede scaldano di piú - perdi un po' di velocita in Ethash (anche se è minimale) Prova a vedere su whattomine se è profitabile, c'è l' opzione ETH+, li ti puoi fare i calcoli per il dual-mining.
|
|
|
I have the ASRock H110 Pro BTC+ motherboard running 13 Nvidia GTX 1070's and they are experiencing a similar problem where they do not want to hash higher than 27 MH/s. Would you mind sharing the BIOS mod that you are using to achieve higher hash rates? I previously ran 8 of these same 1070's on an ASUS B250 Mining Expert motherboard and they had no problems performing at 32 MH/s. I realize that each motherboard is different and requires understanding. Any information you can share will be greatly appreciated.
His Bios-mod is for AMD cards, not for your GTX 1070's and not for your motherboard...Have you overclocked/set powerlimit of your cards properly? If you are using Windows10, have you installed the latest updates? Have you increased your page file size (virtual memory)?
|
|
|
Hab im Netz eine Anleitung gesehen, damit kann man auch mit Android Tv Boxen (Chipsatz s905, s905X und s912) staken, zuvor muss aber Linux darauf installiert werden ;-) P. S. Habs selbst NICHT ausprobiert....
|
|
|
Ich ergänze die Liste mal mit etwas älteren Asrock boards. Vielleicht hat ja jemamd eines Zuhause rumliegen oder findet eines günstig auf e-bay ;-) http://cryptomining-blog.com/tag/asrock-gpu-mining/Intel Socket 1151 ASRock Motherboards 5 cards: – ASRock B150A-X1 – ASRock B150 Pro4D3 – ASRock B150 Pro43.1 – ASRock H170A-X1 – ASRock H170 Pro4 – ASRock H170 Pro4D3 – ASRock H170 Pro4S 4 cards: – ASRock B150 Combo – ASRock B150M Pro4S – ASRock B150M Pro4 – ASRock Q170M vPro – ASRock H170 Combo – ASRock H170M Pro4S – ASRock H170M Pro4 Intel Socket 1150 ASRock Motherboards 6 cards: – ASRock H81 Pro BTC – ASRock H81 Pro-G – ASRock B85 Anniversary – ASRock H97 Anniversary 4 cards: – ASRock H81M BTC – ASRock H81M-G – ASRock B85M BTC – ASRock B85 Pro4 – ASRock H87 Pro4 Intel Socket 1155 ASRock Motherboards 6 cards: – ASRock H61 Pro BTC – ASRock H61 Pro – ASRock H61DEL 4 cards: – ASRock H67DE3 – ASRock P67 Pro – ASRock P67 Pro3 SE – ASRock P75 Pro3 AMD FM2/FM2+ ASRock Motherboards 5 cards: – ASRock FM2A58+ BTC – ASRock FM2A58 Pro+ – ASRock FM2A78 Pro3+ – ASRock FM2A88X+ BTC – ASRock FM2A88X Pro+ R2.0 – ASRock FM2A88X Pro+ – ASRock FM2A88X Pro3+ 4 cards: – ASRock FM2A58M+ BTC – ASRock FM2A78 Pro4+ – ASRock FM2A88M+ BTC
|
|
|
Salve
perdonatemi ...una domanda veramente da bnovisio
è possibile minare pura con un antminer
Siccome Pura usa l' algoritmo x11, devi cercarti un asic quale lo riesce a minare. Di quel che so io, ci sono diversi tipi di antmimer. Per esempio l' antminer d3 o anche un baikal giant x10 conoscono tale algo.
|
|
|
Any one still have Sapphire Rx480 8 GB Samsung Memory, Can share modified bios
Search for ubermix timings 3.1 and mod your bios with Polaris Bios Editor (save your original bios first). Set your core clock + memory clock + undervolt your card in the claymore miner batch file. You can get about 30 mh/s with this timings and the right config in your batch.
|
|
|
I like this program WHY everybody is STEELING fees from us we mine and pay the bill and yes we make money But this fee thing on pools, devs, wallets etc etc etc is worse then taxes
I am glad some people are looking into this
edit: By the way i would buy it if it has no dev fee personally i think that would be the best option considdering you are taking fees now.
If you don't like the fees, you can do the following: 1. use a mining software without fees (genoils ethminer) 2. try to solo mine (you don't pay any pool fee) 3. mine a coin without dev fees p.s. Dev's should be paid for their work. If you don't like to pay their fees, don't use their software...
|
|
|
Hi!
I have just built my first mining rig with asrock and four asus gtx 1080 ti turbo. Everyting boots up fine, loading windows from ssd. Sooo.. I connect a usb mouse and cant make it work. Thought it was the drivers not installing ( its not on wifi yet), so I put the ssd in a laptop and confirmed it was ok and then tried again, but no succsess. Anything obvious I have missed? (As I just said, this is my first mining rig and also my first pc ever, be gentle with a noob;-)
I think the first thing you should do is: Try to boot with another USB-Mouse or connect your mouse to one of the Usb 2.0 ports!
|
|
|
Hallo Ich suche ein Skript, die mir bei Claymore die Hashrate Gesamt und des jeweiligen GPU's ausließt. Ich hab mir eine eigene Fehlersuch-Batch geschrieben, wenn Fehler, soll Miner oder PC neu gestartet werden. Funktion: 1. IF z.B. GPU 1 gleich kleiner 20.000 Mh/s, dann soll goto :Neustart (erstelle danach :Afterburner des jeweilgen Profiles) else goto :run2ME IF else natürlich 2. If Total Speed gleich kleiner 70.000Mh/s, dann soll goto :shutdown Else goto :run2ME 3. Diese beiden sollen die Hashrate alle 15 Sekunden abgefragt werden! Nur ich habe keine Ahnung wie ich jedes einzelne GPU auslese und dann die Hashrate verzweige, dass der PC rebootet. Ich habe es mit Findstr versucht, ging nicht. Auch mit FIND habe ich es probiett, weil ich zumindest eine zeit setzten kann, was aber auch fehl schlug. Bitte um Hilfe Falls mal wer eine Fehlersuche Skript braucht. Shutdown.txt muss vorher erstellt werden! @echo off
:start SET loopnum=0
echo Initializing... cd "D:\Ethermine\" START worker1.bat timeout 30 goto :run goto :run GPU
:run timeout 15 SET /A loopnum=loopnum+1 echo Script has completed %loopnum% loops. @echo off
for /F "tokens=*" %%f in ('dir /od /b "D:\Ethermine\*.txt"') do set _lastFile=%%f echo Parsing for errors...
goto :nex0
:run2ME timeout 10 for /F "tokens=*" %%f in ('dir /od /b "D:\Ethermine\*.txt"') do set _lastFile=%%f for /f %%i in ('find /v /c "" ^< D:\Ethermine\%_lastFile%') do set /a lines=%%i
for /f %%I in ('find /v /c "" ^< D:\Ethermine\%_lastFile%') do set /a lines1=%%I if %lines% == %lines1% ( echo %date% %time% Looks like miner may have crashed, checking again ... goto :before neustart new check ) ELSE ( echo All is well. goto :noerrors )
:noerrors echo No issues detected. Resume mining... goto :run
:before neustart new check timeout 15 for /F "tokens=*" %%f in ('dir /od /b "D:\Ethermine\*.txt"') do set _lastFile=%%f for /f %%i in ('find /v /c "" ^< D:\Ethermine\%_lastFile%') do set /a lines=%%i
for /f %%I in ('find /v /c "" ^< D:\Ethermine\%_lastFile%') do set /a lines1=%%I if %lines% == %lines1% ( echo %date% %time% Looks like miner may have crashed, checking again agin... goto :neustart ) ELSE ( echo All is well. goto :noerrors )
:neustart timeout 10
for /f %%I in ('find /v /c "" ^< D:\Ethermine\%_lastFile%') do set /a lines2=%%I if %lines1% == %lines2% ( echo %date% %time% Miner has died of dysentery ... echo Loggin into shutdowns.txt - Check for details as to why the shutdown. echo Line count match %lines% , %lines1% , %lines2%>> "D:\Ethermine\shutdowns.txt" echo %DATE:~10,4%-%DATE:~4,2%-%DATE:~7,2%> "D:\Ethermine\shutdowns.txt" echo %date% %time%> "D:\Ethermine\shutdowns.txt" echo Miner becomes Neustart
taskkill /FI "WINDOWTITLE eq worker1" timeout 5 start D:\Ethermine\worker1.bat timeout 30 goto :new check ) ELSE ( goto :noerrors )
:new check timeout 10 for /F "tokens=*" %%f in ('dir /od /b "D:\Ethermine\*.txt"') do set _lastFile=%%f for /f %%i in ('find /v /c "" ^< D:\Ethermine\%_lastFile%') do set /a lines=%%i
for /f %%I in ('find /v /c "" ^< D:\Ethermine\%_lastFile%') do set /a lines2=%%I if %lines1% == %lines2% ( echo Miner has died of dysentery ... goto :shutdown ) ELSE ( echo %date% %time% Close but all is well. timeout 3 goto :noerrors )
:before shutdown new check for /F "tokens=*" %%f in ('dir /od /b "D:\Ethermine\*.txt"') do set _lastFile=%%f for /f %%i in ('find /v /c "" ^< D:\Ethermine\%_lastFile%') do set /a lines=%%i timeout 10
for /f %%I in ('find /v /c "" ^< D:\Ethermine\%_lastFile%') do set /a lines1=%%I if %lines% == %lines1% ( echo %date% %time% Looks like miner may have crashed, checking again ... goto :shutdown ) ELSE ( echo All is well. goto :noerrors )
:shutdown for /f %%I in ('find /v /c "" ^< D:\Ethermine\%_lastFile%') do set /a lines2=%%I if %lines1% == %lines2% ( echo %date% %time% Close but all is well. timeout 3 goto :noerrors ) ELSE ( echo %date% %time% Miner has died of dysentery ... echo Loggin into shutdowns.txt - Check for details as to why the shutdown. echo Line count match %lines% , %lines1% , %lines2%>> "D:\Ethermine\shutdowns.txt" echo %DATE:~10,4%-%DATE:~4,2%-%DATE:~7,2%> "D:\Ethermine\shutdowns.txt" echo %date% %time%> "D:\Ethermine\shutdowns.txt" echo Shutting down now ... pause shutdown /r /t 10 )
:nex0 findstr /I /C:"CUDA error" "D:\Ethermine\%_lastFile%" if %ERRORLEVEL% == 0 ( echo %date% %time% CUDA Errors found> "D:\Ethermine\shutdowns.txt" goto :run2ME ) ELSE ( goto :nex1 )
:nex1 findstr /I /C:"failed GPU" "D:\Ethermine\%_lastFile%" if %ERRORLEVEL% == 0 ( echo %date% %time% Failed GPU string found> "D:\Ethermine\shutdowns.txt" goto :run2ME ) ELSE ( goto :nex2 ) :nex2 findstr /I /C:"unspecified launch failure" "D:\Ethermine\%_lastFile%" if %ERRORLEVEL% == 0 ( echo %date% %time% Unspecified Launch Failure string found> "D:\Ethermine\shutdowns.txt" goto :run2ME ) ELSE ( goto :nex3 ) :nex3 findstr /I /C:"Miner thread hangs, need to restart miner!" "D:\Ethermine\%_lastFile%" if %ERRORLEVEL% == 0 ( echo %date% %time% Miner thread hangs, need to restart miner! string found> "D:\Ethermine\shutdowns.txt" goto :run2ME ) ELSE ( goto :nex4 )
:nex4 set Programm=EthDcrMiner64.exe
tasklist | find /i "%Programm%" if %errorlevel% == 0 ( echo Prozess "%Programm%" läuft goto :nex5 ) else ( echo %date% %time% Prozess "%Programm%" läuft nicht goto :run2ME )
:nex5 findstr /I /C:"Cannot connect to eu1.ethermine.org:4444" "D:\Ethermine\%_lastFile%" if %ERRORLEVEL% == 0 ( echo %date% %time% Miner Cannot Connect! string found> "D:\Ethermine\shutdowns.txt" goto :run2ME ) ELSE ( goto :nex6 )
:nex6 findstr /I /C:"Socket was closed remotely (by pool)" "D:\Ethermine\%_lastFile%" if %ERRORLEVEL% == 0 ( echo %date% %time% Miner Cannot Connect! string found> "D:\Ethermine\shutdowns.txt" goto :run2ME ) ELSE ( goto :noerrors )
Sorry, aber zu was braucht man so ein Skript? Sollte die Hashrate deines Rigs immer wieder abfallen und dies dann nur durch einen Neustart behoben werden können, würde ich den Fehler zuerst mal in deinem Rig Setup suchen. Oder hab ich vlcht. den Nutzen des Skripts falsch verstanden?
|
|
|
su attacco pci direi proprio di no e quello che hai linkato comunque è un riser pcie vecchio stile (non pci) , puoi solo sfruttare il tuo slot pcie x16 e i due slot pcie x1, massimo 3 gpu
Infatti era proprio quello che volevo capire. Se era possibile sfruttare le altre 3 pci Perchè non provi con un "pci-e splitter", con quello puoi fare 3-4 slot pci-e esterni da un pci-e del tuo motherboard. Prima di acquistare controlla se è compatibile con la tua hardware.
|
|
|
Ciao ragazzi, avrei bisogno di un parere esperto (ci sta sempre da imparare).
Attualmente ho diverse rig con gpu (circa 15kw di uso) e ho buona esperienza sul mining con gpu. Non ho invece mai cercato né affrontato l'argomento del Mining con ASICS.
Qualcuno esperto potrebbe dirmi se al momento investire su qualche ASICS (in caso quali) possa essere una buona idea? Grazie!
Si presume, che Bitmain sta creando un nuovo Asic per Dagger Hashimoto. L' Antminer F3, quale potrebbe avere da 200 - 250 mh/s in Ethereum e un consumo energetico minore in confronto ai gpu-rig....
|
|
|
Sorry... kann gelöscht werden...
|
|
|
Hallo zusammen,
leider konnte ich im Forum nichts passendes zu meiner Frage finden.
Ich habe drei 1060 am Laufen, doch möchte ich auf 6 1070TI aufrüsten. Da ich daheim zwei 400W enermax ELT400 netzteile schon hatte laufen die Karten mit zwei Netzteilen. Das System lief aber nur, nachdem die Pcie Riser an einem Netzteil angeschlossen wurden und die Karten an das Selbe wie das Mainboard. Zumal ich in in den Foren immerwieder gelesen habe, dass die powered Riser an ein anderes Netzteil angeschlossen werden müssen wie die Karten.
Ich frage mich ob dies immer nur der Fall ist, wenn man zwei Netzteile betreibt? Ich möchte ein neues Netzteil kaufen und alles darüber laufen lassen. Ist das denn mit powered Risern möglich? Falls ja, habt ihr einen guten Tipp, welches gut ist und genug anschlüsse hat für die Karten UND die Riser? Oder sollte bei ich der zwei Netzteile Lösung bleiben?
Was haltet ihr von Server Netzteilen? Ist die Lautstärke tragbar?
EDIT: Meine Riser und die Karten Anschlüsse haben Sata Anschlüsse. Soll ich auf Molex switchen?
Merci!
Riser und Karte sollten immer am gleichen Netzteil angeschlossen werden. In deinem Fall wűrd ich Mobo + 1 Riser + 1 Karte über Psu1 und die anderen 2 Karten +Riser űber Psu2 laufen lassen. Nicht mehr als 1 Riser pro Sata Kabel, wenn du auf Molex wechselst, nicht mehr als 2 Riser pro Molex Kabel. Willst du noch 6x 1070ti an dein Rig mit 3x 1060 hinzufűgen?
|
|
|
Hi zusammen,
habe vier Mining Rigs gebaut, Hardware:
MSI Z270A- SLI PLUS Mainboards Intel Celeron G3930 60GB SSD 8GB RAM je RIG 6 RX 570 4GB (6x MSI RX 570 Gaming, 6x Sapphire RX 570 Pulse, 6x ASUS RX 570, und ein RIG mit 2x Sapphire RX 570 Nitro 8GBund 4x Sapphire RX 570 Pulse) Netzteile sind Rombutech 1250 Watt (Ist eigentlich eine Notlösung, da keine anderen Lieferbar waren, aber anscheinend sind die Netzteile in Ordnung)
als OS nutze ich SMOS
Das Problem ist das immer wieder bei allen Rigs eine GraKa in OpenGL Fehler läuft. Meine Vermutung sind defekte Riser, aber warum laufen die Rigs dann zum teil einige Stunden durch und dann wieder nur paar Minuten.
Kann mir jemand weiterhelfen, damit ich die Rigs bald möglich zum durchlaufen bekomme, ohne alle paar Minuten über das SMOS Dashboard die Rigs neu starten muss.
ETH: 02/12/18-20:54:13 - SHARE FOUND - (GPU 4) ETH: Share accepted (21 ms)! ETH: 02/12/18-20:54:21 - SHARE FOUND - (GPU 0) ETH: Share accepted (26 ms)! GPU0 t=62C fan=67%, GPU1 t=56C fan=67%, GPU2 t=55C fan=67%, GPU3 t=61C fan=67%, GPU4 t=60C fan=67%, GPU5 t=46C fan=67% ETH: 02/12/18-20:54:33 - New job from eu1.ethpool.org:3333 ETH - Total Speed: 122.657 Mh/s, Total Shares: 73, Rejected: 0, Time: 00:29 ETH: GPU0 24.523 Mh/s, GPU1 24.547 Mh/s, GPU2 24.530 Mh/s, GPU3 24.530 Mh/s, GPU4 24.528 Mh/s, GPU5 0.000 Mh/s ETH: 02/12/18-20:54:40 - New job from eu1.ethpool.org:3333 ETH - Total Speed: 122.672 Mh/s, Total Shares: 73, Rejected: 0, Time: 00:29 ETH: GPU0 24.529 Mh/s, GPU1 24.544 Mh/s, GPU2 24.549 Mh/s, GPU3 24.522 Mh/s, GPU4 24.527 Mh/s, GPU5 0.000 Mh/s GPU0 t=62C fan=67%, GPU1 t=56C fan=67%, GPU2 t=56C fan=67%, GPU3 t=61C fan=67%, GPU4 t=59C fan=67%, GPU5 t=43C fan=67% WATCHDOG: GPU 5 hangs in OpenCL call, exit WATCHDOG: GPU 5 hangs in OpenCL call, exi
Erzähl uns doch mal welche Riser du verwendest (sata, molex oder 6pin) und wie du die mit deinem Netzteil verbunden hast.... dein Problem könnte auch an der Verkabelung liegen.
|
|
|
I signed up for signature campaign. I like this project!
|
|
|
Wenn du Claymore v11.0 verwendest, check mal di option "-platform".
-platform 1 - - - - -- - nur amd gpus werden verwendet -platform 2 - - - - - - -nur nvidia gpus werden verwendet
|
|
|
|