Who Wants to Sell Their Batch 1 order???
I will Pay USD what your Order amount was, this way you get back exactly what you invested in to the order


If you are interested in Selling your Order Please Get intouch with me and give me your contact info so that i can contact you and we can complete the deal

https://www.kncminer.com/pages/payment


Why did they stop accepting PayPal/CC? Having a payment method with some consumer protection was nice while it lasted.

Connectivity Issues and Coming Resolutoin

i cant find seller for psu evga 1300w no one sell   
amazon dont have stock

Hmm, I'd reset it all to default, what are your individual die voltages at default? Mine are -0.1121V on all dies. You can get it back to defaults by hitting "Reset to Factory Defaults"

Then just increase ASIC1 - Die2 by 0.01V increments till you get to 0 leaving it for a few minutes at a time. I didn't have a completely dead die, well I didn't when I started, but I stopped a few dies by overvolting them, but got them back by putting it back to defaults and being more cautious.

It takes time, I had putty open in the screen session watching for cores disabling and bertmod in one browser to confirm what die the core disabled, then I would tweak the voltage on that die little bit by little bit until it came back on again. Then the waiting game for more dies to turn off, etc etc.

Similar patience is needed when overclocking CPU/GPU/Memory for benchmarking. A PITA to do while its happening, but very satisfying when you get it working.

Of course you may just have a terminally faulty module, which you will have to RMA  

No, but I did find with my 4 VRM one that putting the volts up too much turned the core off like your Die 2 is showing.

Is that what your trying to do? Get Die 2 up and running?

Is there a thread listing 20nm orders, like AFox's thread of October orders before?

I feel pretty proud to have secured a Neptune 6 hours after they were announced. Checked KnC's shop now, and they are no longer listed.

Before that I cancelled a November Jupiter, which I consider to be a good move, and I missed out on an upgrade unit for my Saturn, which in retrospect seems to be a lucky turn of events.

We'll see if Neputunes turn out to be as profitable as October 28nm units, but at this moment KnC is the only larger company that feel positive about.

Nothing special really, just a ivy bridge celeron and a z77 mobo with 7 pcie slots. The mobo is a z77a-gd65, but a cheaper z77a-gd44 (i think?) works with 6 cards... Has to be ivy or 6 won't work. There's 3500W of power under my rig now, but two of the supplies are cheap 1000W'ers. They run 6 7950's at 1.125V, but not 6 280x cards at any voltage. I use a EVGA 1500W to supplement the other two supplies. I ordered 1300W and 1000W evga power supplies, one will power the mobo and 3 cards, and the other will power three cards alone. Ought to be plenty of headroom, I expect 275W from each card.

The rig is running xubuntu, as I wasn't able to figure out how to get 6 280x cards running in W8. You have to use the beta 3.11 drivers for Cgminer to "see" these cards, they show up as 7900 series with old drivers but won't ever mine.
Anyway, 3.11 beta drivers from AMDs site work pretty well. I did a bunch of reading on the net, and these settings are the best mixture of what I was able to find. I should say that these settings might be completely useless to you, but they should be a starting point. These cards all act different, I'm starting to think any results otherwise are just gamblers fallacy! Either way, I won't charge you 1 BTC for my config because I'm not that much of a douche  

You will need to tweak the GPU clock speed for each card, most of mine are somewhere between 1025 and 1045.





I can lower the fan speed to 80% and still maintain ~75 degrees. I've got some work left to do with ducting and more permanent fan mounting.

Either way - I'd be interested to give the PCB+drivers a shot.

@Bitcoinorama, when will be tuning suite/new firmware release?

Ok I've literally just tried to tie down a confirmed date. Current indication from the engineers I spoke to is tomorrow. That's based on them testing it, they are happy with the values you can set, but the lead software engineer on that piece of software is not around currently so I won't be held to anything definite. I'm unlikely to see him until tomorrow. So for all intents and purposes all the guys present today are happy with it.

Und was wenn die Münzen spät zusammenkommen, und der Preis von Mike angepasst wird?
Ist ja nicht so, das die 52,75 für immer gelten werden, je nachdem ob der Kurs sinkt oder steigt.
Desweiteren sind 30€ für "Verwaltung" und Versand schon recht happig angelegt.

Bestellst du evtl. noch ein Pack PromoCoins mit, bei denen teilnehmen kann? Von den Messing hab ich noch genügend.