KnC should just simply ship one Titan to the BFGMiner developer

How can I show up the BFGMiner stats?



How did you do that? With a Y cable?



At multi.ghash.io:3333 or ltc.ghash.io:3333?

Yaamp is torturing me with a current estimate of 0.88 BTC/MHs 
but the Titan web interface still reports "Miner Status: Running (Connect to Miner API failed)".

It's probably no hardware error. I guess the ASIC drivers are total crap ... or both

They should rename to AlphaMiner

I get also no results with Yaamp and the Titan.

Nicehash and SimpleMulti works fine with 2 Titan cubes each at 75 MHs = 150 MHs.

P.S. I'm still troubleshooting to get cube 3 and 4 working.

Edit: Cube 3 and 4 are now "working" with Nicehash, so 4 cubes are mining now at Nicehash for the first 5 minutes between 180-290 MHs and now between 0-240 MHs ... more zero than 240

I could change the settings from load balancing to failover. With load balancing I had 150 MHs for 2 cubes and 25% rejects, now with failover I have 100 MHs for 2 cubes and 33% rejects.

2 PCI-E 6 pin connections for 1 cube?

Thank's for the info!

Which settings do you have for Quota (1) and Password (x)? In the past there was something like d=0.08 instead of x for the password for GPU miners to reduce the rejects. Can't remember anymore.

Really? 2 cubes work (20-25% rejects) with load balancing and Nicehash (the other 2 cubes don't get recognized).

With failover I don't get a connection to Nicehash.

Thank you very much!

What's the meaning of Quota?

Strategy: Failover or Load balance? With Failover I don't get a connection with Nicehash.

1.

Can someone please tell me which Miner Settings are working ... I'm mining since 1 year with cgminer, sgminer and ccminer but I don't have a clue what's Quota

These are my current not working settings:

{
  "pools": [
    {
      "quota": "stratum+tcp://stratum.nicehash.com:3333",
      "user": "my-BTC-walletaddress",
      "pass": "x"
    }
  ]
}


2.

HW Status says only ASIC Slot 5 and 6 are working but two other cubes should be recognized. I have 2 PSUs with 1300 watt each, both running, all cube fans running.

I've connected all 4 cubes the same way to the board, red wire on the right, if you look at the board.

One red LED (below PP10) is on, at the top board (the one with the LAN connector).

Any ideas?

3.

How do I safely shut down the Titan with 4 cubes?

THX

Maybe some work arounds just for 2 pools e.g. Nicehash and Wafflepool ...  any ideas how to switch between 2 pools on Linux?

I'm not really a big off online wallets. Are there any plans building a Dogeparty wallet app like Dogecoin-Qt or Multidoge?

Does anyone have experience in building a server case for the KnC Neptune/Titan or knows some links?

I'm wondering why KnC delievers 10000 USD miners in peaces instead of using a professional server case. Their "new modular cases" look so damn dilettantish and are total crap if it comes to colocation.

http://www.youtube.com/watch?v=Zxd3YI2SY2M

Does anyone know a Multi Pool Switcher software for Linux like e.g. "Awesome Profit Switching" or "Miner Control"?

Is it possible with a Scrypt-ASIC to get fully automated payed in Darkcoins?

Maybe with a pool who payes the Scrypt miner in DRK (couldn't find one) or e.g. an exchange which would change fully automated the incoming BTC from your miner (many exchanges don't like that) to DRK and sending them fully automated to your wallet on your phone or PC?

@StuffOfInterest

Looks great!

Does Miner Control support AMD and Nvidia GPUs? Any chance to release the software for Linux, too?

Yesterday I've tried to compile ccMiner like always ...

cd ccminer-djm34-0901
chmod +x configure autogen.sh

"This is easily fixed by adding at the end to Makefile.am"
AUTOMAKE_OPTIONS = subdir-objects

./autogen.sh
./configure
make

... but now I get the following error

./cuda_helper.h(493): error: more than one instance of overloaded function "__shfl" matches the argument list:
            function "__shfl(int, int, int)"
            function "__shfl(float, int, int)"
            argument types are: (uint32_t, int)

./cuda_helper.h(494): error: more than one instance of overloaded function "__shfl" matches the argument list:
            function "__shfl(int, int, int)"
            function "__shfl(float, int, int)"
            argument types are: (uint32_t, int)

2 errors detected in the compilation of "/tmp/tmpxft_00001fc8_00000000-12_cuda_blake512.compute_50.cpp1.ii".
Makefile:1666: recipe for target 'heavy/cuda_blake512.o' failed
make[2]: *** [heavy/cuda_blake512.o] Error 2
make[2]: Leaving directory '/home/user/ccminer-djm34-0901'
Makefile:1229: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/user/ccminer-djm34-0901'
Makefile:453: recipe for target 'all' failed
make: *** [all] Error 2

I've already tried Teamviewer but didn't work out of the box. You're probably right, it's not easy to install but maybe I can figure out how to install it in the next few days

In the meantime I've installed X11VNC and it works fine, except encrypted connections.

FreeNX looks interesting too but doesn't work at the moment.


Some internet providers disconnect every 24h but at the moment mine doesn't and I've found out my AVM FritzBox has a build in email service everytime something changes, including the IP address Awesome

Oh! Thanks for your quick reply!

I'm running 14.6 beta (Linux) since months and I'm currently trying to set up a multi algo conf with all algos for the Nicehash pool. So no chance for Scrypt-N with 14.6?