|
Ich habe bei meiner Node auf dem Pi jetzt Port 8333 freigegeben, wo kann ich sehen ob die "Node" jetzt funktioniert?
Oder welche Portfreigabe braucht die eMark??? Für die fullnode?!
|
|
|
|
Wenn die "Node" auch 24/7 läuft, ein "richtige" Node ist es erst wenn man zusätzlich auch noch die Portfreigabe (5556) im Router macht?
Oder irre ich mich da jetzt?
Du musst Port 8333 im Router freigeben damit auch ausgehende Verbindungen zugelassen werden. Dann nur noch 24/7 laufen lassen und du hast einen full node:) Danke, der Port 8333 wird auch für die "eMark" gelten? Und welches Protokoll muß ich freigeben? Bei meinem Bintec sieht das so aus: Art des Datenverkehrs: eingehend (Ziel-NAT) Protokoll: TCP, UDP,...  -> vermutlich TCP? mfg |
|
|
|
Integration heißt mmn aber auch, sich an das jeweilige Land "anzupassen" und auch die andere Kultur die im Land wertgeschätzt wird zu respektieren  Das siehst Du falsch. Es ist heute in weiten Kreisen üblich, erst mal in die nächste Ecke zu scheissen, wenn man irgendwo zu Gast ist. Danach wird lautstark rumgepöbelt, was der Gastgeber doch für einen Dreckstall hat.   |
|
|
|
Muss man sich langsam Sorgen um SpAcEDeViL machen?
Seit 3 Wochen nicht mehr online gewesen...
Stimmt, aber BTC Pool ist wieder "alive" |
|
|
|
Heinz Buschkowsky warnt vor Flüchtlings-Gettos
Wo der Herr Buschkowsky recht hat, hat er recht. Solange den Pegida-Dumpfbacken jedes Mittel recht ist, die Integration ihrer zukünftigen Rentenzahler zu verhindern, züchten wir uns eine Parallelgesellschaft von Arbeitssklaven heran. Das ist im römischen Reich schon nicht gut gegangen, das wird auch diesmal scheitern. Es wird Zeit, endlich mit echter Integration zu beginnen. Bauordnungen, die einfach mal vorschreiben, dass in jedem Mehrfamilienhaus auch immer eine Sozialwohnung drin sein muss, wären doch mal ein netter Anfang Integration heißt mmn aber auch, sich an das jeweilige Land "anzupassen" und auch die andere Kultur die im Land wertgeschätzt wird zu respektieren |
|
|
|
THX it looks with these config file good!!! {
"pools" : [
{
"quota" : "1;stratum+tcp://miner-control.de:3335",
"user" : "xxx",
"pass" : "egalo",
"enableExtranonceSubscribe" : true
},
{
"quota" : "9;stratum+tcp://miner-control.de:3330/#skipcbcheck",
"user" : "xxx",
"pass" : "egalo",
"enableExtranonceSubscribe" : true
},
{
"quota" : "0;stratum+tcp://mint.bitminter.com:3333",
"user" : "xxx",
"pass" : "egalo",
"enableExtranonceSubscribe" : true
}
]
,
"load-balance" : true,
"api-listen" : true,
"api-allow" : "W:0/0",
"api-port" : "4028",
"expiry" : "120",
"failover-only" : true,
"log" : "5",
"no-pool-disable" : true,
"queue" : "2",
"scan-time" : "60",
"worktime" : true,
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"usb" : ":11",
"scan" : ["bifury:all"],
"scan" : ["bigpic:all"]
} bfgminer version 5.3.0 - Started: [2015-10-10 16:32:23] - [ 0 days 00:09:59]
Manage devices Pool management Settings Display options Help Quit
Pools: 2 (0,1) Diff:32-76 + LU:[16:41:26]
Block: ...5122b689ec11e3db Diff:1.73M (12.35T) Started: [16:41:49] I:?
ST:18 F:0 NB:9 AS:0 BW:[ 44/ 14 B/s] E:321.03 BS:6.34k
11/15 36.3C | 40.63/36.35/35.18Gh/s | A:50 R:0+0(none) HW:637/ 11%
----------------------------------------------------------------------------------------------------------------------------------
BIF 0: 36.3C | 6.49/ 4.96/ 4.96Gh/s | A: 2 R:0+0(none) HW: 49/6.8%
BIF 1: 32.4C | 6.35/ 4.97/ 4.97Gh/s | A: 7 R:0+0(none) HW: 62/8.4%
BIF 2: 31.2C | 6.39/ 5.19/ 5.19Gh/s | A:10 R:0+0(none) HW: 31/4.2%
BPM 0: | 2.58/ 2.58/ 2.22Gh/s | A: 3 R:0+0(none) HW:114/ 28%
BPM 1: | 2.15/ 2.15/ 1.93Gh/s | A: 4 R:0+0(none) HW: 70/ 21%
BPM 2: | 2.58/ 2.57/ 2.55Gh/s | A: 7 R:0+0(none) HW: 98/ 22%
BPM 3: | 2.73/ 2.72/ 2.52Gh/s | A: 3 R:0+0(none) HW:107/ 24%
BIF 3: 35.6C | 5.99/ 5.17/ 5.18Gh/s | A: 4 R:0+0(none) HW: 38/5.2%
BPM 4: | 2.29/ 2.28/ 2.16Gh/s | A: 2 R:0+0(none) HW: 15/5.0%
BPM 5: | 2.61/ 2.61/ 2.39Gh/s | A: 4 R:0+0(none) HW: 25/7.3%
BPM 6: | 2.64/ 2.64/ 2.54Gh/s | A: 4 R:0+0(none) HW: 29/8.1%
----------------------------------------------------------------------------------------------------------------------------------
0: Enabled Strtm Quota 1 Pool 0: stratum+tcp://miner-control.de:3335 User:xxx
DWvdKd7mw
1: Enabled Strtm Quota 9 Pool 1: stratum+tcp://miner-control.de:3330/#skipcbcheck User:xxx
K9Z51ZxdcpsdzEpfT5C6VV
2: Failover Strtm Quota 0 Pool 2: stratum+tcp://mint.bitminter.com:3333 User:xxx
Current pool management strategy: Load Balance
[F]ailover only enabled
Pool [A]dd [R]emove [D]isable [E]nable [P]rioritize [Q]uota change
[C]hange management strategy witch pool nformation
Or press any other key to continue BIG THX |
|
|
|
That normal now it stop lag and other issue by disabling like that . what that does is do a coin check with coinbase that was causing issue at times to a lot of miner if I remember right . what makes BFG so good over all the others is it leaves in a lot of old stuff that might be use full at another time but disables it as needed . +--coinbase-check-addr <arg> A list of address to check against in coinbase payout list received from the previous-defined pool, separated by ',' +--coinbase-check-total <arg> The least total payout amount expected in coinbase received from the previous-defined pool +--coinbase-check-percent <arg> The least benefit percentage expected for the sum of addr(s) listed in --cbaddr argument for previous-defined pool So a new test, for the "alcoin" pool "eMark" http://miner-control.de:8000/workersI can't add the sha256 "eMark" pool always come this massage? [2015-10-10 15:26:08] Coinbase check: multiple inputs in coinbase: 0x10 [2015-10-10 15:26:08] Pool 3 misbehaving (coinbase check), disabling! Can i disabling the "Coinbase check" per config file? |
|
|
|
sorry not really sure what you want to know but here is link to that coin https://bitcointalk.org/index.php?topic=310939.0I see the 4 Bi*Fury and 7 RedFury USB mine on the BFG Command line GUI. they are all loaded it looks like ?  and "api-allow" : "W:127.0.0.1,W:192.168.1.0/24" i know you can use it your way but i all way use it like this,but I'm not to sure how that would work in your case never used either of those miner. but really don't know whats wrong ? it all looks good now ? . I'll bet you can tweak out some of those Hardware error by speed adjustments but there i might be wrong never used either of those miner so don't really know the command line other then do what you did and do auto load . Yes i only mine with this 7 USB miners for tests... i don't use a API i only look over "putty". But i have a problem with the config: Is this right for the 11 miners in the bfgminer.conf: "scan" : ["bigpic:all"] "scan" : ["bifury:all"] or "scan" : ["BPM:all"] "scan" : ["BIF:all"] ?? And the pool with the Quota have problems?? 0: Enabled Strtm Quota 1 Pool 0: stratum+tcp://mint.bitminter.com:3333 Userxxx 1: Misbehav Strtm Quota 9 Pool 2: stratum+tcp://miner-control.de:3330 User:xxx 2: Enabled Strtm Quota 1 Pool 1: stratum+tcp://miner-control.de:3335 User:xxx When i will enable the (eMark/altcoin) Pool 1, [2015-10-10 15:10:17] Coinbase check: multiple inputs in coinbase: 0x4b [2015-10-10 15:10:17] Pool 1 misbehaving (coinbase check), disabling! ?? So i have change the config: {
"pools" : [
{
"quota" : "1;stratum+tcp://miner-control.de:3335",
"user" : "xxx",
"pass" : "egalo"
},
{
"quota" : "9;stratum+tcp://miner-control.de:3330",
"user" : "xxx",
"pass" : "egalo"
},
{
"quota" : "0;stratum+tcp://mint.bitminter.com:3333",
"user" : "xxx",
"pass" : "egalo"
}
]
,
"load-balance" : true,
"api-listen" : true,
"api-allow" : "W:0/0",
"api-port" : "4028",
"expiry" : "120",
"failover-only" : true,
"log" : "5",
"no-pool-disable" : true,
"queue" : "2",
"scan-time" : "60",
"worktime" : true,
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"usb" : ":11",
"scan" : ["bigpic:all"],
"scan" : ["bifury:all"]
} |
|
|
|
THX for your help, i found a way to install the bfgminer successful I load this packages manuelly: - libjansson4_2.7-3_armel.deb - uthash-dev_1.9.5-1_all.deb then i install the packeges with "dpkg -i" so yet i can install the bfgminer with this commands: cd /usr/src sudo wget http://luke.dashjr.org/programs/bitcoin/files/bfgminer/5.3.0/bfgminer-5.3.0.zipsudo unzip bfgminer-5.3.0.zip sudo rm -rf bfgminer-5.3.0.zip sudo mv /usr/src/bfgminer-5.3.0 /usr/src/bfgminer cd /usr/src/bfgminer sudo chmod +x ./configure sudo ./configure CFLAGS="-O2" --enable-broad-udevrules sudo make Then i start to test with: ./bfgminer --config /home/pi/bfgminer.conf --quiet So the bfgminer starts YEAH bfgminer version 5.3.0 - Started: [2015-10-10 14:05:40] - [ 0 days 00:02:22] Manage devices Pool management Settings Display options Help Quit Pool 0: mint.bitminter.com Diff:64 +Strtm LU:[14:07:35] User:xxx Block #378265: ...27ea72e7 Diff:60.8G (435.3P) Started: [14:05:40] I: 6.65uBTC/hr ST:18 F:0 NB:1 AS:0 BW:[ 60/ 12 B/s] E:126.47 BS:1.38k 11/15 30.3C | 37.22/37.20/36.49Gh/s | A:3 R:0+0(none) HW:166/ 12% -------------------------------------------------------------------------------------------------------------------- BIF 0: 30.3C | 4.84/ 4.70/ 4.70Gh/s | A:0 R:0+0(none) HW: 14/8.2% BIF 1: 30.1C | 6.35/ 5.28/ 5.28Gh/s | A:0 R:0+0(none) HW: 6/3.3% BIF 2: 29.7C | 5.62/ 4.70/ 4.70Gh/s | A:1 R:0+0(none) HW: 11/6.6% BIF 3: 30.2C | 6.14/ 4.98/ 4.98Gh/s | A:0 R:0+0(none) HW: 17/9.3% BPM 0: | 2.30/ 2.27/ 2.23Gh/s | A:0 R:0+0(none) HW: 3/3.9% BPM 1: | 2.60/ 2.58/ 2.84Gh/s | A:1 R:0+0(none) HW: 21/ 18% BPM 2: | 2.62/ 2.61/ 2.65Gh/s | A:0 R:0+0(none) HW: 12/ 12% BPM 3: | 2.58/ 2.56/ 2.29Gh/s | A:0 R:0+0(none) HW: 26/ 25% BPM 4: | 2.16/ 2.14/ 1.96Gh/s | A:0 R:0+0(none) HW: 21/ 24% BPM 5: | 2.65/ 2.63/ 2.50Gh/s | A:1 R:0+0(none) HW: 22/ 21% BPM 6: | 2.74/ 2.72/ 2.38Gh/s | A:0 R:0+0(none) HW: 15/ 16% But i have a mistake in my bfgconfig, at cgminer the Pool config (QUOTA)are OK?? I use only 4 Bi*Fury and 7 RedFury USB miner... This Pool, "quota" : "9;stratum+tcp://miner-control.de:3330", "user" : "xxx", "pass" : "egalo" is a "Altcoin" (eMark) Pool? {
"pools" : [
{
"quota" : "0;stratum+tcp://mint.bitminter.com:3333",
"user" : "xxxi",
"pass" : "egalo"
},
{
"quota" : "1;stratum+tcp://miner-control.de:3335",
"user" : "xxx",
"pass" : "egalo"
},
{
"quota" : "9;stratum+tcp://miner-control.de:3330",
"user" : "xxx",
"pass" : "egalo"
}
]
,
"api-listen" : true,
"api-port" : "4028",
"api-allow" : "W:0/0",
"expiry" : "120",
"failover-only" : true,
"log" : "5",
"no-pool-disable" : true,
"queue" : "2",
"scan-time" : "60",
"worktime" : true,
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"usb" : ":11",
"scan" : ["bigpic:all"],
"scan" : ["bifury:all"]
} |
|
|
|
skip that and try cd /usr/src sudo wget http://luke.dashjr.org/programs/bitcoin/files/bfgminer/5.3.0/bfgminer-5.3.0.zipsudo unzip bfgminer-5.3.0.zip sudo rm -rf bfgminer-5.3.0.zip sudo mv /usr/src/bfgminer-5.3.0 /usr/src/bfgminer cd /usr/src/bfgminer sudo chmod +x ./configure sudo ./configure CFLAGS="-O2" --enable-broad-udevrules sudo make sudo ldconfig lsusb ./bfgminer --version and try it all without the Sudo line . one of two of those OSes don't need it . it may ask for your password thu I had that issue once i just dumped the OS and went with one i knew i had working on PI's and cubieboards BERRYBOOT this is very nice http://www.berryterminal.com/doku.php/berryboot but you need to make sure you get the one that works with your baord or it won't i think i read some place about the squeeze Release having issue to some extent might be wrong . Sorry but without the "libjansson-dev" e bfgminer don't compile to the end?? Anyone have the "libjansson-dev.deb" then i can install it manuelly... |
|
|
|
@buchi-88 Wenn alles so gut geklappt hat, warum verpasst Du ihm dann nicht die ersten positive Trustbewertung? Das ist doch wohl das Mindeste, was man machen kann. Also lass Dich nicht lumpen. Hab ich doch ?? |
|
|
|
you have to CD into the BFG folder after it unziped and do it from there you did do sudo apt-get -y install git-core build-essential autoconf automake libtool pkg-config libcurl4-gnutls-dev libjansson-dev uthash-dev libncursesw5-dev libudev-dev libusb-1.0-0-dev libevent-dev libmicrohttpd-dev libc-bin it right there in red just boot the PI up do at the default see what that does it is a PI and you are doing with http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html in SSH it might the folder you Cd to not sure . Sorry but it's the same after this commands: cd /usr/src sudo wget http://luke.dashjr.org/programs/bitcoin/files/bfgminer/5.3.0/bfgminer-5.3.0.zipsudo unzip bfgminer-5.3.0.zip sudo rm -rf bfgminer-5.3.0.zip sudo mv /opt/bfgminer-5.3.0 /opt/bfgminer cd /usr/src/bfgminer-5-3-0 sudo apt-get -y install git-core build-essential autoconf automake libtool pkg-config libcurl4-gnutls-dev libjansson-dev uthash-dev libncursesw5-dev libudev-dev libusb-1.0-0-dev libevent-dev libmicrohttpd-dev libc-bin Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package libjansson-dev root@sunwatch:/usr/src/bfgminer-5.3.0# Can i install the "libjansson-dev" manuelly?? or try sudo apt-get upgrade
sudo apt-get updatethen try sudo apt-get -y install git-core build-essential autoconf automake libtool pkg-config libcurl4-gnutls-dev libjansson-dev uthash-dev libncursesw5-dev libudev-dev libusb-1.0-0-dev libevent-dev libmicrohttpd-dev libc-bin I don't know but always the same... root@sunwatch:~# sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. root@sunwatch:~# sudo apt-get update Hit http://ftp.uk.debian.org squeeze Release.gpg Ign http://ftp.uk.debian.org/debian/ squeeze/main Translation-en Ign http://ftp.uk.debian.org/debian/ squeeze/main Translation-en_GB Ign http://ftp.uk.debian.org/debian/ squeeze/non-free Translation-en Ign http://ftp.uk.debian.org/debian/ squeeze/non-free Translation-en_GB Hit http://ftp.uk.debian.org squeeze Release Hit http://ftp.uk.debian.org squeeze/main armel Packages Hit http://ftp.uk.debian.org squeeze/non-free armel Packages Reading package lists... Done root@sunwatch:~# sudo apt-get -y install git-core build-essential autoconf automake libtool pkg-config libcurl4-gnutls-dev libjansson-dev uthash-dev libncursesw5-dev libudev-dev libusb-1.0-0-dev libevent-dev libmicrohttpd-dev libc-bin Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package libjansson-dev root@sunwatch:~# |
|
|
|
you have to CD into the BFG folder after it unziped and do it from there you did do sudo apt-get -y install git-core build-essential autoconf automake libtool pkg-config libcurl4-gnutls-dev libjansson-dev uthash-dev libncursesw5-dev libudev-dev libusb-1.0-0-dev libevent-dev libmicrohttpd-dev libc-bin it right there in red just boot the PI up do at the default see what that does it is a PI and you are doing with http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html in SSH it might the folder you Cd to not sure . Sorry but it's the same after this commands: cd /usr/src sudo wget http://luke.dashjr.org/programs/bitcoin/files/bfgminer/5.3.0/bfgminer-5.3.0.zipsudo unzip bfgminer-5.3.0.zip sudo rm -rf bfgminer-5.3.0.zip sudo mv /opt/bfgminer-5.3.0 /opt/bfgminer cd /usr/src/bfgminer-5-3-0 sudo apt-get -y install git-core build-essential autoconf automake libtool pkg-config libcurl4-gnutls-dev libjansson-dev uthash-dev libncursesw5-dev libudev-dev libusb-1.0-0-dev libevent-dev libmicrohttpd-dev libc-bin Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package libjansson-dev root@sunwatch:/usr/src/bfgminer-5.3.0# Can i install the "libjansson-dev" manuelly?? |
|
|
|
Hello, i have a a Debian System on my Pi: Linux sunwatch 4.1.10+ #820 PREEMPT Sun Oct 4 15:33:59 BST 2015 armv6l
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Wed Oct 7 21:20:50 2015 from 192.168.0.48 But i can't install the Bfgminer on my system? root@sunwatch:~# aptitude install bfgminer
Couldn't find any package whose name or description matched "bfgminer"
Couldn't find any package whose name or description matched "bfgminer"
No packages will be installed, upgraded, or removed.
0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B of archives. After unpacking 0 B will be used. Anyone have an idea? how are you complliing BFG ? . try this cd /opt sudo apt-get -y install git-core build-essential autoconf automake libtool pkg-config libcurl4-gnutls-dev libjansson-dev uthash-dev libncursesw5-dev libudev-dev libusb-1.0-0-dev libevent-dev libmicrohttpd-dev libc-bin sudo wget http://luke.dashjr.org/programs/bitcoin/files/bfgminer/5.3.0/bfgminer-5.3.0.zipsudo unzip bfgminer-5.3.0.zip sudo rm -rf bfgminer-5.3.0.zip sudo mv /opt/bfgminer-5.3.0 /opt/bfgminer cd /opt/bfgminer sudo chmod +x ./configure sudo ./configure CFLAGS="-O2" --enable-scrypt --enable-broad-udevrules sudo make sudo ldconfig lsusb ./bfgminer --version and when you need to use BFG each time you may need to Cd to it then use it something like this . cd /opt/bfgminer sudo ./bfgminer -o stratum+tcp://your pool -u your btc address -p your password if the pool needs one and your miners setting here you can set the PI to cd to whatever for you at login i just haven't bro to learn how yet, I will once i get tried of typing CD / whatever at login ( most of the time if it works i won't learn much more beyond that unless it starts annoying me to much then i will ) . I'll automate my login more. all his mean is it's all updated No packages will be installed, upgraded, or removed. 0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B of archives. After unpacking 0 B will be used. Hello so after the start i have my first problem: cd /usr/src sudo apt-get -y install git-core build-essential autoconf automake libtool pkg-config libcurl4-gnutls-dev libjansson-dev uthash-dev libncursesw5-dev libudev-dev libusb-1.0-0-dev libevent-dev libmicrohttpd-dev libc-bin Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package libjansson-dev ?? |
|
|
|
Hey,
ich bin gerade auf diesen Coin aufmerksam geworden.
Normalerweise mag ich keine 0815 Coins - aber das Konzept mit der "rein deutschen" Währung gefällt mir.
Meine Frage - SHA256 heißt mining wieder nur mit ASIC's profitabel oder gibt es auch die Möglichkeit mit der GPU zu minen?
Falls ja - gibt es auch Nvidia Unterstützung?
Einfach nicht profitabel ein 5€ Stickminer (zB.: Antminer U2 2Gh/s) bringt dir da mehr |
|
|
|
Mining cost for 1 DEM is 0.00004 BTC and it was the price before wallet problem. It's only the mater of time when price will rise.
I hope it will rise up soon. I write yesterday an support ticket to Cryptsy for an upgrade of the Wallet. They will work on it soon as I presumed, price is rising and network hashrate is above 200 ths. nice  At time about Network Hashrate: 237.69 TH/s  |
|
|
|
|
Wenn die "Node" auch 24/7 läuft, ein "richtige" Node ist es erst wenn man zusätzlich auch noch die Portfreigabe (5556) im Router macht?
Oder irre ich mich da jetzt?
|
|
|
|
@ toptek THX i will test it at the evening For only Bitfury USB Sticks i don't need this? sudo ./configure CFLAGS="-O3" --enable-scrypt --enable-broad-udevrules |
|
|
|
Habe noch 7 BitFury Red Fury - Bitcoin USB ASIC BTC Miner Sticks.
Besteht Interesse?
Gruß
Zimbo
DANKE für die 9 USB Miner es hat alles einwandfrei funktioniert, ein Newbie wie man es sich wünscht |
|
|
|
|
Show Posts
