Yes the bios are modded on all cards.  

I was able to get the miner hashing for about 2-3 minutes then the entire rig gets rebooted... then when I attempt to restart the miner again it recognized the first two card then I receive "lolminer.exe has stopped working, A problem caused the program to stop working correctly, Windows will close the program and notify you if a solution is available."

Im also getting a security warning saying "The publisher could not be verified.  Are you sure you want to run this software?"  I click run, it begins to run then shuts down.  I have windows defender disabled from the registry keys, so I don't know how Im getting this warning.

Trying to mine Beam using newest version with an AMD rig.  When miner starts it begins to detect each GPU but windows immediately closes the miner after the second card is detected.  It doesn't give me an error, just closes the miner.  How can I remedy this?

I've also tried the pause command, but still don't get an error listed.  

I tried the windows cmd prompt to no avail.

I have windows defender permanently disabled but its as if it still stops the miner through windows smartscreen.  I have everything defender disabled but it continue to close the miner.

Any help would be appreciated.

Is this rating for a 1070TI??, cause my 1070s are only getting 4.4 or 4.3

It took a little over 2 hours for mine to show up on the exchange.

Likely need to increase your virtual memory to atl least 28 GB

7 evga 1070 (bminer) mining about 2.4 grin in 24 hours according to f2pool

Need help with the -clkernel 3 set up.  I have a 12 gpu AMD rig consisting of 2,4gb 560, 3 4gb 580, 3 8gb 570 and 4 8gb 580.  when attempting to set up turbo clkernels im getting the following error message.  I placed the following in the command line: "-clkernel 332223333232"   Any help would be appreciated.

2019.01.18:06:58:02.616: main Phoenix Miner 4.1c Windows/msvc - Release build
2019.01.18:06:58:02.616: main Cmd line: -pool ssl://us1.ethermine.org:5555 -pool2 us1.ethermine.org:4444 -wal 0xf9f81Af91d261d9934900072182FCa3fef906424.Android1 -proto 3 -clkernel 332223333232
2019.01.18:06:58:02.616: main No CUDA driver found
2019.01.18:06:58:06.814: main OpenCL driver version: 18.8/9
2019.01.18:06:58:06.814: main Available GPUs for mining:
2019.01.18:06:58:06.814: main GPU1: Radeon RX 580 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
2019.01.18:06:58:06.814: main GPU2: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 32 CUs
2019.01.18:06:58:06.814: main GPU3: Radeon RX 580 Series (pcie 3), OpenCL 2.0, 4 GB VRAM, 36 CUs
2019.01.18:06:58:06.814: main GPU4: Radeon RX 560 Series (pcie 4), OpenCL 2.0, 4 GB VRAM, 14 CUs
2019.01.18:06:58:06.814: main GPU5: Radeon RX 560 Series (pcie 5), OpenCL 2.0, 4 GB VRAM, 14 CUs
2019.01.18:06:58:06.814: main GPU6: Radeon RX 580 Series (pcie 7), OpenCL 2.0, 8 GB VRAM, 36 CUs
2019.01.18:06:58:06.814: main GPU7: Radeon RX 580 Series (pcie , OpenCL 2.0, 8 GB VRAM, 36 CUs
2019.01.18:06:58:06.814: main GPU8: Radeon RX 570 Series (pcie 9), OpenCL 2.0, 8 GB VRAM, 32 CUs
2019.01.18:06:58:06.814: main GPU9: Radeon RX 570 Series (pcie 10), OpenCL 2.0, 8 GB VRAM, 32 CUs
2019.01.18:06:58:06.814: main GPU10: Radeon RX 580 Series (pcie 11), OpenCL 2.0, 4 GB VRAM, 36 CUs
2019.01.18:06:58:06.814: main GPU11: Radeon RX 580 Series (pcie 12), OpenCL 2.0, 8 GB VRAM, 36 CUs
2019.01.18:06:58:06.814: main GPU12: Radeon RX 580 Series (pcie 13), OpenCL 2.0, 4 GB VRAM, 36 CUs
2019.01.18:06:58:06.895: main ADL library initialized
2019.01.18:06:58:07.982: main Eth: Loading pools from epools.txt
2019.01.18:06:58:07.982: main Eth: Invalid wallet 'YourWallet.DESKTOP-KC9828A' specified for pool 1 from epools.txt. Replace with a real wallet
2019.01.18:06:58:07.982: main Eth: Invalid wallet 'YourWallet.DESKTOP-KC9828A' specified for pool 2 from epools.txt. Replace with a real wallet
2019.01.18:06:58:07.982: main Eth: the pool list contains 2 pools (2 from command-line)
2019.01.18:06:58:07.982: main Eth: primary pool: ssl://us1.ethermine.org:5555
2019.01.18:06:58:07.982: main Starting GPU mining
2019.01.18:06:58:07.982: main Matched GPU1 to ADL adapter index 28 (method 1)
2019.01.18:06:58:08.068: main GPU1: Created ADL monitor for adapter 28; overdrive version: 7
2019.01.18:06:58:08.068: main GPU1: using AMD driver ver 18.9.3
2019.01.18:06:58:08.068: main Matched GPU2 to ADL adapter index 56 (method 1)
2019.01.18:06:58:08.149: main GPU2: Created ADL monitor for adapter 56; overdrive version: 7
2019.01.18:06:58:08.149: main GPU2: using AMD driver ver 18.9.3
2019.01.18:06:58:08.149: main Matched GPU3 to ADL adapter index 42 (method 1)
2019.01.18:06:58:08.230: main GPU3: Created ADL monitor for adapter 42; overdrive version: 7
2019.01.18:06:58:08.230: main GPU3: using AMD driver ver 18.9.3
2019.01.18:06:58:08.230: main Matched GPU4 to ADL adapter index 76 (method 1)
2019.01.18:06:58:08.310: main GPU4: Created ADL monitor for adapter 76; overdrive version: 7
2019.01.18:06:58:08.311: main GPU4: using AMD driver ver 18.9.3
2019.01.18:06:58:08.311: main Matched GPU5 to ADL adapter index 70 (method 1)
2019.01.18:06:58:08.391: main GPU5: Created ADL monitor for adapter 70; overdrive version: 7
2019.01.18:06:58:08.391: main GPU5: using AMD driver ver 18.9.3
2019.01.18:06:58:08.391: main Matched GPU6 to ADL adapter index 14 (method 1)
2019.01.18:06:58:08.471: main GPU6: Created ADL monitor for adapter 14; overdrive version: 7
2019.01.18:06:58:08.471: main GPU6: using AMD driver ver 18.9.3
2019.01.18:06:58:08.471: main Matched GPU7 to ADL adapter index 21 (method 1)
2019.01.18:06:58:08.552: main GPU7: Created ADL monitor for adapter 21; overdrive version: 7
2019.01.18:06:58:08.552: main GPU7: using AMD driver ver 18.9.3
2019.01.18:06:58:08.552: main Matched GPU8 to ADL adapter index 63 (method 1)
2019.01.18:06:58:08.633: main GPU8: Created ADL monitor for adapter 63; overdrive version: 7
2019.01.18:06:58:08.633: main GPU8: using AMD driver ver 18.9.3
2019.01.18:06:58:08.633: main Matched GPU9 to ADL adapter index 49 (method 1)
2019.01.18:06:58:08.713: main GPU9: Created ADL monitor for adapter 49; overdrive version: 7
2019.01.18:06:58:08.713: main GPU9: using AMD driver ver 18.9.3
2019.01.18:06:58:08.713: main Matched GPU10 to ADL adapter index 7 (method 1)
2019.01.18:06:58:08.794: main GPU10: Created ADL monitor for adapter 7; overdrive version: 7
2019.01.18:06:58:08.794: main GPU10: using AMD driver ver 18.9.3
2019.01.18:06:58:08.794: main Matched GPU11 to ADL adapter index 0 (method 1)
2019.01.18:06:58:08.904: main GPU11: Created ADL monitor for adapter 0; overdrive version: 7
2019.01.18:06:58:08.904: main GPU11: using AMD driver ver 18.9.3
2019.01.18:06:58:08.904: main Matched GPU12 to ADL adapter index 35 (method 1)
2019.01.18:06:58:08.984: main GPU12: Created ADL monitor for adapter 35; overdrive version: 7
2019.01.18:06:58:08.984: main GPU12: using AMD driver ver 18.9.3
2019.01.18:06:58:08.985: wdog Starting watchdog thread
2019.01.18:06:58:09.428: main Eth: Connecting to ethash pool ssl://us1.ethermine.org:5555 (proto: QtMiner)
2019.01.18:06:58:09.479: eths Eth: Connected to SSL ethash pool us1.ethermine.org:5555 (2606:4700:90:0:b886:9f1:5c3e:5711)
2019.01.18:06:58:09.525: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_login","params":["0xf9f81Af91d261d9934900072182FCa3fef906424.Android1"]}

2019.01.18:06:58:09.590: eths Eth: Received: {"id":1,"jsonrpc":"2.0","result":true}
2019.01.18:06:58:09.590: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2019.01.18:06:58:09.631: eths Eth: Received: {"id":5,"jsonrpc":"2.0","result":["0xdd6e4a289bd083155877621e71a86f8d7d9cb71b1bcfb563073bfe34be41d189","0xfc07df566e435375b9a66bc1e5c35e40b5e69814dd4855b0093944698f4f26c4","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6c2645"]}
2019.01.18:06:58:09.632: eths Eth: New job #dd6e4a28 from ssl://us1.ethermine.org:5555; diff: 4000MH
2019.01.18:06:58:09.632: main Listening for CDM remote manager at port 3333 in read-only mode
2019.01.18:06:58:09.632: main GPU1: 41C 0%, GPU2: 52C 0%, GPU3: 50C 34%, GPU4: 57C 33%, GPU5: 56C 36%, GPU6: 45C 0%, GPU7: 47C 0%, GPU8: 52C 0%, GPU9: 53C 26%, GPU10: 53C 40%, GPU11: 44C 0%, GPU12: 47C 53%
2019.01.18:06:58:09.633: GPU1 GPU1: Starting up... (0)
2019.01.18:06:58:09.633: GPU1 GPU1: Generating ethash light cache for epoch #236
2019.01.18:06:58:09.646: GPU2 GPU2: Starting up... (0)
2019.01.18:06:58:09.662: GPU3 GPU3: Starting up... (0)
2019.01.18:06:58:09.677: GPU4 GPU4: Starting up... (0)
2019.01.18:06:58:09.693: GPU5 GPU5: Starting up... (0)
2019.01.18:06:58:09.709: GPU6 GPU6: Starting up... (0)
2019.01.18:06:58:09.724: GPU7 GPU7: Starting up... (0)
2019.01.18:06:58:09.741: GPU8 GPU8: Starting up... (0)
2019.01.18:06:58:09.756: GPU9 GPU9: Starting up... (0)
2019.01.18:06:58:09.771: GPU10 GPU10: Starting up... (0)
2019.01.18:06:58:09.787: GPU11 GPU11: Starting up... (0)
2019.01.18:06:58:09.803: GPU12 GPU12: Starting up... (0)
2019.01.18:06:58:12.396: GPU1 Light cache generated in 2.8 s (16.5 MB/s)
2019.01.18:06:58:12.771: GPU1 GPU1: Allocating DAG (2x 2.86) GB; good for epoch up to #238
2019.01.18:06:58:12.781: GPU1 GPU1: Allocating light cache buffer (45.7) MB; good for epoch up to #238
2019.01.18:06:58:12.895: GPU1 GPU1: Generating DAG for epoch #236
2019.01.18:06:58:13.162: GPU2 GPU2: Allocating DAG (2x 2.86) GB; good for epoch up to #238
2019.01.18:06:58:13.173: GPU2 GPU2: Allocating light cache buffer (45.7) MB; good for epoch up to #238
2019.01.18:06:58:13.288: GPU2 GPU2: Generating DAG for epoch #236
2019.01.18:06:58:13.548: GPU3 GPU3: Allocating DAG (2.86) GB; good for epoch up to #238
2019.01.18:06:58:13.555: GPU3 GPU3: Allocating light cache buffer (45.7) MB; good for epoch up to #238
2019.01.18:06:58:13.670: GPU3 GPU3: Generating DAG for epoch #236
2019.01.18:06:58:13.932: GPU4 GPU4: Allocating DAG (2.86) GB; good for epoch up to #238
2019.01.18:06:58:13.939: GPU4 GPU4: Allocating light cache buffer (45.7) MB; good for epoch up to #238
2019.01.18:06:58:14.069: GPU4 GPU4: Generating DAG for epoch #236
2019.01.18:06:58:14.315: GPU5 GPU5: Allocating DAG (2.86) GB; good for epoch up to #238
2019.01.18:06:58:14.323: GPU5 GPU5: Allocating light cache buffer (45.7) MB; good for epoch up to #238
2019.01.18:06:58:14.438: GPU5 GPU5: Generating DAG for epoch #236
2019.01.18:06:58:14.553: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2019.01.18:06:58:14.553: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0) 7: 0.000 MH/s (0) 8: 0.000 MH/s (0) 9: 0.000 MH/s (0) 10: 0.000 MH/s (0) 11: 0.000 MH/s (0) 12: 0.000 MH/s (0)
2019.01.18:06:58:14.711: GPU6 GPU6: Allocating DAG (2x 2.86) GB; good for epoch up to #238
2019.01.18:06:58:14.720: GPU6 GPU6: Allocating light cache buffer (45.7) MB; good for epoch up to #238
2019.01.18:06:58:14.818: GPU1 GPU1: DAG  25%
2019.01.18:06:58:14.835: GPU6 GPU6: Generating DAG for epoch #236
2019.01.18:06:58:15.031: GPU2 GPU2: DAG  25%
2019.01.18:06:58:15.100: GPU7 GPU7: Allocating DAG (2x 2.86) GB; good for epoch up to #238
2019.01.18:06:58:15.108: GPU7 GPU7: Allocating light cache buffer (45.7) MB; good for epoch up to #238
2019.01.18:06:58:15.245: GPU7 GPU7: Generating DAG for epoch #236
2019.01.18:06:58:15.317: GPU3 GPU3: DAG  31%
2019.01.18:06:58:15.532: GPU8 GPU8: Allocating DAG (2x 2.86) GB; good for epoch up to #238
2019.01.18:06:58:15.614: GPU4 GPU4: DAG  13%
2019.01.18:06:58:15.772: GPU8 GPU8: Allocating light cache buffer (45.7) MB; good for epoch up to #238
2019.01.18:06:58:15.891: GPU8 GPU8: Generating DAG for epoch #236
2019.01.18:06:58:15.989: GPU5 GPU5: DAG  13%
2019.01.18:06:58:16.212: GPU9 GPU9: Allocating DAG (2x 2.86) GB; good for epoch up to #238
2019.01.18:06:58:16.608: GPU9 GPU9: Allocating buffers failed with: clCreateBuffer (-4).
2019.01.18:06:58:16.614: GPU1 GPU1: DAG  50%
2019.01.18:06:58:16.630: GPU2 GPU2: DAG  50%
2019.01.18:06:58:16.761: GPU6 GPU6: DAG  25%
2019.01.18:06:58:16.847: GPU3 GPU3: DAG  63%
2019.01.18:06:58:16.947: GPU10 GPU10: Allocating DAG (2.86) GB; good for epoch up to #238
2019.01.18:06:58:16.973: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xe5817595108cc13484bc8fc1eccaf56bf63c6d7bc9aa969734b5cb5ca39faabc","0xfc07df566e435375b9a66bc1e5c35e40b5e69814dd4855b0093944698f4f26c4","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x6c2646"]}
2019.01.18:06:58:16.973: eths Eth: New job #e5817595 from ssl://us1.ethermine.org:5555; diff: 4000MH
2019.01.18:06:58:16.975: GPU9 GPU9: Starting up... (0)
2019.01.18:06:58:17.006: wdog Thread(s) not responding. Restarting.
2019.01.18:06:58:17.053: GPU10 GPU10: Allocating buffers failed with: clCreateBuffer (-4).
2019.01.18:06:58:17.139: GPU4 GPU4: DAG  25%
2019.01.18:06:58:17.171: GPU7 GPU7: DAG  25%
2019.01.18:06:58:17.368: GPU11 GPU11: Allocating DAG (2x 2.86) GB; good for epoch up to #238
2019.01.18:06:58:17.458: GPU11 GPU11: Allocating buffers failed with: clCreateBuffer (-4).
2019.01.18:06:58:17.634: GPU8 GPU8: DAG  25%
2019.01.18:06:58:17.785: GPU12 GPU12: Allocating DAG (2.86) GB; good for epoch up to #238
2019.01.18:06:58:17.884: GPU12 GPU12: Allocating buffers failed with: clCreateBuffer (-4).
2019.01.18:06:58:17.928: GPU9 GPU9: Allocating DAG (2x 2.86) GB; good for epoch up to #238
2019.01.18:06:58:18.014: GPU9 GPU9: Allocating buffers failed with: clCreateBuffer (-4).
2019.01.18:06:58:18.102: GPU5 GPU5: DAG  31%
2019.01.18:06:58:18.229: GPU2 GPU2: DAG  75%
2019.01.18:06:58:18.352: GPU3 GPU3: DAG  94%
2019.01.18:06:58:18.403: GPU1 GPU1: DAG  75%
2019.01.18:06:58:18.559: GPU6 GPU6: DAG  50%
2019.01.18:06:58:18.653: GPU3 GPU3: DAG generated in 5.0 s (584.5 MB/s)
2019.01.18:06:58:18.654: GPU3 GPU3: Using Ethash OCL kernels (Ellesmere; -clkernel 2)
2019.01.18:06:58:18.654: GPU3 GPU3: no -gt value specified, switching to auto-tune
2019.01.18:06:58:18.654: GPU3 GPU3: starting auto-tune process
2019.01.18:06:58:18.960: GPU7 GPU7: DAG  50%
2019.01.18:06:58:19.233: GPU8 GPU8: DAG  50%
2019.01.18:06:58:19.247: GPU4 GPU4: DAG  44%
2019.01.18:06:58:19.538: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

Is it 2% dev fee for mining Grin?

You need to update your Nvidia/amd driver version to utilize the newest bminer.

Thank you very much.  That did it.

Im attempting to mine Grincoin using gringold miner and f2pool.  When I start the miner it recognized the 7 1070 8gb gpus.  When it gets to the 5th, 6th and 7th, card I get a Video Memory Error.  What do I need to do to get all 7 cards mining?

Whats your set up and how many coins you mining in a 24 period?

Thats what it was... the AV... Thank you for you input!

Awesome.  Now that you got that out of the way, straighten me out with a answer.

Need some help:  I want to run phoenix miner 3.5d to see if its faster than claymore 11.9.  I downloaded it from mega to a thumb drive, copied it over to my rig... which is a 12 GPU AMD rig consisting of Rx560, 570 and 580s.  my command line in the start.bat is this: "PhoenixMiner.exe -pool ssl://us.1.ethermine.org:5555 -pool2 us1.ethermine.org:4444 -wal YourEthWalletAddress.WorkerName -proto 3" pause, except it has my wallet and rig name.

 After saving it  and double clicking it, I get this return and it freezes: "PhoenixMiner.exe is not reconized as an internal or external command, operable program or batch file"

I haven't changed anything in config.txt or epools...

windows 10

What am I missing to start this miner???