|
@ C&C Hash Factory.
Thanks to you guys I am getting 109,210 Kh/s on Mjollnir Coin ( 8 - 750 ti's @ 12,700 each and 1 - 670 @ 10,100 Kh/s). If you are still mining or have mined it if you put your addy's up I'll send you some in a day or two after I build some up.
Also want to say thanks to bigjme for compiling. I know C&C have been busy coding. I'll send something in your address in your signature. Give me a couple of days also.
|
|
|
|
Are there some hidden blocks  |
|
|
|
@ cryptomines and cayars
Thanks.
I'll bring some hashes over. Just gotta decide all on one coin or mine two coins at once.
Nothing wrong with 2 coins as the same time. I do that myself. One "sure bet" and one speculative coin. Just curious, what is the other coin? Do you have a lot of hash and need to pay for expenses or is it more "hobby" and you can hold coins for a while? This type of thing matters. I am hoping this is a good bet and I am speculating on JackPot Coin. I know way to many coins for it to go anywhere. But it is a fun coin. This is both now. Hobby and to pay bills (more like a job all the free time I have goes into it). I got started in January of this year and now have 14 cards. Been buying new cards with the money from mining. Now paying off bills as I mine (been lucky and got some good coins on launch). My favorite cards is the GTX 750ti. I have 8 of those. It is an amazing little card. I am doing 12,500 kh/s right now with each one ( none over clocked). I am done for mow until the GTX 880's come out. |
|
|
|
|
@ cryptomines and cayars
Thanks.
I'll bring some hashes over. Just gotta decide all on one coin or mine two coins at once.
|
|
|
|
|
@ nonce or anyone who can help.
Getting ready to stop mining a coin that is going into POS.
Only been mining with about 33 Mh/s but getting ready to add 50 possibly 80 more Mh/s. What can I expect from Nonce pool with 83-113 MH/s per day? Sorry to ask but I have come to realize the stat in the pool page is often no where near correct.
|
|
|
|
@ C&C or anyone else
Question about CCMiner or issue I am having.
Does anything else special need to be installed installed on the computer to run properly?
On my rig 1 I have 3 750ti's and 1 670 and everything runs smooth as butter.
On rig 2 I have 5 750ti's and I can not get over 500 kh/s on any card whether I run them individual, all together or in groups.
I basically copied the folder from rig 1 to rig 2 and made .bat files. I just changed the -d on rig 2 in the bat files to correspond to the gpu's. Here is my example:
ccminer50.exe -a mjollnir -d 0
ccminer50.exe -a mjollnir -d 0,1,2
my question is how does it run smooth when gtx670 with ccminer50? ccminer50 is for maxwell gpu That was for the 750 ti's. The 670 runs on ccminer30.exe If you are sure, that the devices specified with -d are correct and the 670 IS NOT INCLUDED, then plz check your cpu-usage. Is this the limiting factor? On rig you have 5x 750Ti and no other Cards? then specify: "ccminer50.exe -a mjollnir -t 5 -d 0,1,2,3,4" (maybe you don't Need -d Option, if you're using every Card in the System, but I'm not sure, didn't test it). Christian @ Chris84 Thanks. It seems the problem was from solo mining with the cpu. Once I turned it off and ran the bats again all was fine. |
|
|
|
@ C&C or anyone else
Question about CCMiner or issue I am having.
Does anything else special need to be installed installed on the computer to run properly?
On my rig 1 I have 3 750ti's and 1 670 and everything runs smooth as butter.
On rig 2 I have 5 750ti's and I can not get over 500 kh/s on any card whether I run them individual, all together or in groups.
I basically copied the folder from rig 1 to rig 2 and made .bat files. I just changed the -d on rig 2 in the bat files to correspond to the gpu's. Here is my example:
ccminer50.exe -a mjollnir -d 0
ccminer50.exe -a mjollnir -d 0,1,2
my question is how does it run smooth when gtx670 with ccminer50? ccminer50 is for maxwell gpu That was for the 750 ti's. The 670 runs on ccminer30.exe If you are sure, that the devices specified with -d are correct and the 670 IS NOT INCLUDED, then plz check your cpu-usage. Is this the limiting factor? On rig you have 5x 750Ti and no other Cards? then specify: "ccminer50.exe -a mjollnir -t 5 -d 0,1,2,3,4" (maybe you don't Need -d Option, if you're using every Card in the System, but I'm not sure, didn't test it). Christian Thanks for the reply. Will try this in about 10 hrs when I get home. I did not put the -t in the bat but will try it. I will try just -t 5 and the -t and -d and see how it goes. I also did not pay attention to the cpu usage as I know it is already at 100% solo mining a "cpu only" coin. I'll turn that off also and recheck. This is for my rig with only 5 of the 750ti's. |
|
|
|
@ C&C or anyone else
Question about CCMiner or issue I am having.
Does anything else special need to be installed installed on the computer to run properly?
On my rig 1 I have 3 750ti's and 1 670 and everything runs smooth as butter.
On rig 2 I have 5 750ti's and I can not get over 500 kh/s on any card whether I run them individual, all together or in groups.
I basically copied the folder from rig 1 to rig 2 and made .bat files. I just changed the -d on rig 2 in the bat files to correspond to the gpu's. Here is my example:
ccminer50.exe -a mjollnir -d 0
ccminer50.exe -a mjollnir -d 0,1,2
my question is how does it run smooth when gtx670 with ccminer50? ccminer50 is for maxwell gpu That was for the 750 ti's. The 670 runs on ccminer30.exe |
|
|
|
|
@ C&C or anyone else
Question about CCMiner or issue I am having.
Does anything else special need to be installed installed on the computer to run properly?
On my rig 1 I have 3 750ti's and 1 670 and everything runs smooth as butter.
On rig 2 I have 5 750ti's and I can not get over 500 kh/s on any card whether I run them individual, all together or in groups.
I basically copied the folder from rig 1 to rig 2 and made .bat files. I just changed the -d on rig 2 in the bat files to correspond to the gpu's. Here is my example:
ccminer50.exe -a mjollnir -d 0
ccminer50.exe -a mjollnir -d 0,1,2
|
|
|
|
|
We are at block 17,5?? and counting down. Just you all's gut feeling. Do we reach block 20,160 late tonight, well in the next 12-14 hours or you think we have longer?
Getting ready to leave for work and I don't want to be mining for hours of not doing anything.
|
|
|
|
So what's the deal with 1gh's payouts and web display, looks like the backend for mining is still working as shares are still being accepted. Haven't had a payout in 3hours, was receiving them every 30 mins, sorry if I'm redundant, but didn't see anything but this post that referenced it.
Probably just a stuck job or something. Highly doubt it's anything to worry about. I was curious is it wise to stay at 1gh or just switch or try solo, I know diff is outrageous.
Solo at this point is probably not worth it unless you have huge hash rate. My suggestion to everyone (again just my personal opinion) is that the hash rate should be spread around the pools a bit more. Right now 1GH has a "lock" on the hash rate. There of course is a reason for this, as they have earned the respect of miners who have used them before. 1GH or more specifically REORDER has my utmost respect and trust, which makes this hard to post. Non-the-less with us trying to get MNR on some different exchanges and want to get a high value for the coin, I'd suggest we as a community try and spread the hash out to at least two different pool. Nonce has a proven track record and you can't go wrong using them either. Not that anyone really cares what I think but it would be nice to see at least 4GH at nonce over the next few days. So that would be my suggestion instead of going solo. Carlo I agree whole heartedly what you say. It is just none of the 3 pools have found a block in a while. Unless all 3 are having issues reporting right now. Current block is 753. None of the others have reported finding a block in a while. That is why I was saying to try solo over night. |
|
|
|
|
I was curious is it wise to stay at 1gh or just switch or try solo, I know diff is outrageous.
|
|
|
|
Not for long. Archit might be on it. |
|
|
|
Hello, what values do you get for MNR?
I have 2 750Ti's, and I'm getting ~25500 khash/s.
Is it OK?
You get @ 12,500 kh/s per card? Are you overclocked? I am olnly at 8,670 kh/s. I am not overclocked |
|
|
|
|
About how much time is left before POW is done?
|
|
|
|
Anyone with a sample config?
What config ? 666Coin don't need to add nodes on the config, because have nodes built-in on the code  I wanted to try and solo. So was looking for rcpport. |
|
|
|
|
Anyone with a sample config?
|
|
|
|
|
@mjollnircoin
You have a full config?
What is the port to solo?
|
|
|
|
|
no full config file available?
Ports?
|
|
|
|
Guys if you want better hashrate for jackpot on 6 x ti 750 use the -d function and separate to -d 0,1,2 and onother ccminer with -d 3,4,5 .I don`t know why but with this settings i managed to reach my single ti 750 at 3000khs for card.  Are you getting 3,000 kh/s per card? The most I get is 2,060 kh/s but I am not overclocked. I am using ccminer v0.8 with the 50.exe |
|
|
|
|
Show Posts
