[ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX]

[bigjme]

Only raise the income of us nvidia miners. But the network rate will shoot up so it wont change things too much. A lot of us i beleieve are holding onto our coins

[THeZoiD]

WOW im impress

with 1 x evga gtx770 oc acx

12mh/s on MNR
4.5mh/s on JPC

[THeZoiD]

any news on X11?

[antonio8]

@ C&C or anyone else

Question about CCMiner or issue I am having.

Does anything else special need to be installed installed on the computer to run properly?

On my rig 1 I have 3 750ti's and 1 670 and everything runs smooth as butter.

On rig 2 I have 5 750ti's and I can not get over 500 kh/s on any card whether I run them individual, all together or in groups.

I basically copied the folder from rig 1 to rig 2 and made .bat files. I just changed the -d on rig 2 in the bat files to correspond to the gpu's. Here is my example:
ccminer50.exe -a mjollnir -d 0
ccminer50.exe -a mjollnir -d 0,1,2

[THeZoiD]

@ C&C or anyone else

Question about CCMiner or issue I am having.

Does anything else special need to be installed installed on the computer to run properly?

On my rig 1 I have 3 750ti's and 1 670 and everything runs smooth as butter.

On rig 2 I have 5 750ti's and I can not get over 500 kh/s on any card whether I run them individual, all together or in groups.

I basically copied the folder from rig 1 to rig 2 and made .bat files. I just changed the -d on rig 2 in the bat files to correspond to the gpu's. Here is my example:
ccminer50.exe -a mjollnir -d 0
ccminer50.exe -a mjollnir -d 0,1,2

my question is how does it run smooth   when gtx670 with ccminer50?
ccminer50 is for maxwell gpu

[bigjme]

You need to run ccminer30.exe

[antonio8]

@ C&C or anyone else

Question about CCMiner or issue I am having.

Does anything else special need to be installed installed on the computer to run properly?

On my rig 1 I have 3 750ti's and 1 670 and everything runs smooth as butter.

On rig 2 I have 5 750ti's and I can not get over 500 kh/s on any card whether I run them individual, all together or in groups.

I basically copied the folder from rig 1 to rig 2 and made .bat files. I just changed the -d on rig 2 in the bat files to correspond to the gpu's. Here is my example:
ccminer50.exe -a mjollnir -d 0
ccminer50.exe -a mjollnir -d 0,1,2

my question is how does it run smooth   when gtx670 with ccminer50?
ccminer50 is for maxwell gpu

That was for the 750 ti's. The 670 runs on ccminer30.exe

[Breadpudding]

I had some newbie mining questions related to specifically to Jackpot coin.

1. When solo mining does a better hashrate card increase your chance of solving a block? eg. is a card that hashes at 6Mhs twice as likely to solve a block over a 3Mhs card?

2. Given that the current difficulty rate on Jackpot coin is between 65 and 111 right now.

If a GPU or CPU can't reach the current difficulty level (as displayed on cloudminers) is it best to leave it at a pool since it be impossible to solve the block solo mining because it can't even reach the current difficulty level? (Ignoring electricity costs)

In what way does an older GPU or CPU that doesn't reach the difficulty level actually contribute to the pool in helping it find a block?

Some background info. My earnings have been slowed down over the weekend while at the pools, so last night I decided to switch my two better computers back to solo mining: a 750ti GPU computer & Core2 Quad (CPU mining only). So far I've only found one unaccepted 90k block on the Core2 Quad this morning. Last week I solo mined a small handful of blocks on the 750ti.

Here are my Jackpot coin mining stats while at the cloudminers or miningpoolhub.

I have a 750ti, an older desktop CPU mining , and 2 laptops that can CPU mine.

750ti, 5,140 hashrate, difficulty fluctuates between 512 & 2048, on the windows console 3.1MHs
Core2 Quad 6600 Desktop CPU mining at 433 hashrate, diff between 72 and 128, on win console 368khs
Older core i7 laptop CPU mining at 308 hashrate, diff between 64 & 128, win console 325khs
Older core i5 laptop CPU mining at 120 hashrate, diff around 20, win console 177khs

Thanks!

we have an optimization for jackpot in the works that might almost double the hash rates.

[djm34]

I had some newbie mining questions related to specifically to Jackpot coin.

1. When solo mining does a better hashrate card increase your chance of solving a block? eg. is a card that hashes at 6Mhs twice as likely to solve a block over a 3Mhs card?

yes. The hashrate, is the number of hash a card/cpu/asic can process per second.
The largest this number, the higher the chance of finding one corresponding to a block.

For the second question, I must admit, it isn't entirely clear to me...

[cbuchner1]

donations for ccMiner

in JPC: JYFBypVDkk583yKWY4M46TG5vXG8hfgD2U
in MNC MShgNUSYwybEbXLvJUtdNg1a7rUeiNgooK

consider these the official donation addresses

[liomojo1]

I sent you 1 block reward of jpc 

[see360]

250,000 JPC sent on top of the .02 BTC last night. That's a days jackpot mining plus a week's myriad mining. Hope you get enough people donating to keep up your incentive to share. You guys deserve it. Thanks again, and much respect.

[Chris84]

@ C&C or anyone else

Question about CCMiner or issue I am having.

Does anything else special need to be installed installed on the computer to run properly?

On my rig 1 I have 3 750ti's and 1 670 and everything runs smooth as butter.

On rig 2 I have 5 750ti's and I can not get over 500 kh/s on any card whether I run them individual, all together or in groups.

I basically copied the folder from rig 1 to rig 2 and made .bat files. I just changed the -d on rig 2 in the bat files to correspond to the gpu's. Here is my example:
ccminer50.exe -a mjollnir -d 0
ccminer50.exe -a mjollnir -d 0,1,2

my question is how does it run smooth   when gtx670 with ccminer50?
ccminer50 is for maxwell gpu

That was for the 750 ti's. The 670 runs on ccminer30.exe

If you are sure, that the devices specified with -d are correct and the 670 IS NOT INCLUDED, then plz check your cpu-usage. Is this the limiting factor?
On rig you have 5x 750Ti and no other Cards? then specify: "ccminer50.exe -a mjollnir -t 5 -d 0,1,2,3,4" (maybe you don't Need -d Option, if you're using every Card in the System, but I'm not sure, didn't test it).

Christian

[THeZoiD]

@ C&C or anyone else

Question about CCMiner or issue I am having.

Does anything else special need to be installed installed on the computer to run properly?

On my rig 1 I have 3 750ti's and 1 670 and everything runs smooth as butter.

On rig 2 I have 5 750ti's and I can not get over 500 kh/s on any card whether I run them individual, all together or in groups.

I basically copied the folder from rig 1 to rig 2 and made .bat files. I just changed the -d on rig 2 in the bat files to correspond to the gpu's. Here is my example:
ccminer50.exe -a mjollnir -d 0
ccminer50.exe -a mjollnir -d 0,1,2

my question is how does it run smooth   when gtx670 with ccminer50?
ccminer50 is for maxwell gpu

That was for the 750 ti's. The 670 runs on ccminer30.exe

got it...

for me it dosent work when i number the card in the -d option

i have to use the name ex. gtx770

[Breadpudding]

Chris B,

Just sent along the 2nd half of my 100k JPC donation to that address (50k).

Thanks Christian B & Christian H for all your hard work! We all really do appreciate it

[cbuchner1]

Chris B,

Just sent along the 2nd half of my 100k JPC donation to that address (50k).

Thanks Christian B & Christian H for all your hard work! We all really do appreciate it

thanks, pull ccminer github HEAD for more spead in Jackpot. I've thrown out two thirds of the Groestl.

Christian

[bigjme]

So i can pull github now for the boost?

[cbuchner1]

So i can pull github now for the boost?

yes, PULL PULL. pull harder

[bigjme]

Lmao. I will get it compiled and tested

[liomojo1]

Please upload the compile for compute 5.0 so to give it a try....