diff is still good Latest Block: 624240 (a minute ago) Current Pace: 104.6773% (1297 / 1239.05 expected, 57.95 ahead) Current Difficulty: 13912524048945.91XXXXXXXXXXXXXXXXXXXXXXXXXXXX Next Difficulty: between 14477535159570 and 14563730575574 Next Difficulty Change: between +4.0612% and +4.6807% Previous Retarget: March 25, 2020 at 10:51 PM Next Retarget (earliest): Wednesday at 7:50 AM (in 4d 18h 28m 43s) Next Retarget (latest): Wednesday at 9:45 AM (in 4d 20h 23m 18s) Projected Epoch Length: between 13d 8h 59m 10s and 13d 10h 53m 45s
+4.677% and price at 6730 works for me it can stay in this area as far as I am concerned. 720 blocks to go to next jump.
|
|
|
Itl be a little while tbh. The current state of affairs did not do the previous auction any favours at all. Il buy the silver soon but I wont be doing the hearts for at least another month, and that's before i start on them. Truth be told, i actually made a big fat loss on these, which is great for buyers but tied with the big dip in BTC value, i simply can't go ahead with the expenses associated with a run of hearts right now.
I hope you appreciate my position on this 👍
Corrosive is 990 merits So he is a sr and qualified to be a hero with a few more posts. and with 10 merits he will be in position to reach legendary as the time passes.
|
|
|
Data as of 03/04/2020Updated the lists in the OP (and subsequent post) to reflect the forum members that still qualify in each of those lists. Currently, on those lists there are, lacking <= 20% merits to rank-up (activity may not be met though): - 44 Heroes (on their way to Legendries) - 45 Sr. Members (on their way to Heroes) - 49 Full Members (on their way to Sr. Members) - 34 Members (on their way to Full Members) - 203 Jr. Members on their way to Members) Added this week (10): user_id name Status posts activity activity_Met merit rank ProbableInitialRank trust url 1836948 Bthd Active 1076 742 Y 415 Sr. Member Old Era Newbie =+0 / =0 / -0 https://bitcointalk.org/index.php?action=profile;u=1836948 2461690 Cryptotourist Active 1939 532 Y 414 Sr. Member New Era Newbie =+0 / =0 / -0 https://bitcointalk.org/index.php?action=profile;u=2461690 903175 Csmiami Active 885 560 Y 204 Full Member Full Member =+0 / =2 / -0 https://bitcointalk.org/index.php?action=profile;u=903175 2546135 mandown Active 1432 420 Y 202 Full Member New Era Newbie =+0 / =0 / -0 https://bitcointalk.org/index.php?action=profile;u=2546135 2118956 Snork1979 Active 1473 658 Y 202 Full Member Old Era Newbie =+0 / =0 / -0 https://bitcointalk.org/index.php?action=profile;u=2118956 1060206 GDragon Active 461 406 Y 82 Member Old Era Newbie =+0 / =0 / -0 https://bitcointalk.org/index.php?action=profile;u=1060206 2739424 NotATether Active 146 112 N 81 Member New Era Newbie =+0 / =0 / -0 https://bitcointalk.org/index.php?action=profile;u=2739424 2274267 zabizana Active 30 30 N 9 Jr. Member New Era Newbie =+0 / =0 / -0 https://bitcointalk.org/index.php?action=profile;u=2274267 2628645 Flux0z Active 368 308 Y 9 Jr. Member New Era Newbie =+0 / =0 / -0 https://bitcointalk.org/index.php?action=profile;u=2628645 1594376 angelbbs Active 470 470 Y 8 Jr. Member New Era Newbie =+0 / =0 / -0 https://bitcointalk.org/index.php?action=profile;u=1594376
Removed (*) this week (5): user_id name Status posts activity activity_Met merit rank ProbableInitialRank trust url 1118642 Cnut237 Active 2051 966 Y* 504 Hero Member Full Member =+0 / =0 / -0 https://bitcointalk.org/index.php?action=profile;u=1118642 2581425 ScamViruS Active 488 252 N 261 Sr. Member New Era Newbie =+1 / =0 / -0 https://bitcointalk.org/index.php?action=profile;u=2581425 2501463 Oxstone Active 536 294 Y 105 Full Member New Era Newbie =+0 / =1 / -0 https://bitcointalk.org/index.php?action=profile;u=2501463 1355061 SkyLords Active 1506 700 Y 102 Full Member Old Era Newbie =+0 / =0 / -0 https://bitcointalk.org/index.php?action=profile;u=1355061 1855426 Iamtutut Active 1190 770 Y 101 Full Member Old Era Newbie =+0 / =0 / -0 https://bitcointalk.org/index.php?action=profile;u=1855426
(*) Due to enough merits for the next rank, or being banned. I did: angelbbs Flux0z zabizana If you are a hero with 25 or less to go shoot me a pm If you are a sr with 25 or less to go shoot me a pm
|
|
|
section 2 2020-03-23 00:17:49 driver-btm-soc.c:2270:check_system_work: The avg rate is 40046.76 in 30 mins, PCB temperature between 47 ~ 56. 2020-03-23 00:48:17 driver-btm-soc.c:2270:check_system_work: The avg rate is 39633.54 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-23 01:18:44 driver-btm-soc.c:2270:check_system_work: The avg rate is 40061.46 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-23 01:49:11 driver-btm-soc.c:2270:check_system_work: The avg rate is 39894.76 in 30 mins, PCB temperature between 46 ~ 57. 2020-03-23 02:19:39 driver-btm-soc.c:2270:check_system_work: The avg rate is 39915.64 in 30 mins, PCB temperature between 46 ~ 57. 2020-03-23 02:50:07 driver-btm-soc.c:2270:check_system_work: The avg rate is 40028.72 in 30 mins, PCB temperature between 46 ~ 57. 2020-03-23 03:20:34 driver-btm-soc.c:2270:check_system_work: The avg rate is 40071.09 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-23 03:51:01 driver-btm-soc.c:2270:check_system_work: The avg rate is 39898.80 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-23 04:21:29 driver-btm-soc.c:2270:check_system_work: The avg rate is 39674.49 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-23 04:51:57 driver-btm-soc.c:2270:check_system_work: The avg rate is 39880.15 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-23 05:22:24 driver-btm-soc.c:2270:check_system_work: The avg rate is 40280.52 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-23 05:52:52 driver-btm-soc.c:2270:check_system_work: The avg rate is 39647.38 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-23 06:23:19 driver-btm-soc.c:2270:check_system_work: The avg rate is 40120.44 in 30 mins, PCB temperature between 44 ~ 56. 2020-03-23 06:53:47 driver-btm-soc.c:2270:check_system_work: The avg rate is 40096.08 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-23 07:24:14 driver-btm-soc.c:2270:check_system_work: The avg rate is 39882.12 in 30 mins, PCB temperature between 45 ~ 57. 2020-03-23 07:54:42 driver-btm-soc.c:2270:check_system_work: The avg rate is 40148.41 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-23 08:25:10 driver-btm-soc.c:2270:check_system_work: The avg rate is 39741.21 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-23 08:55:37 driver-btm-soc.c:2270:check_system_work: The avg rate is 39814.11 in 30 mins, PCB temperature between 44 ~ 56. 2020-03-23 09:26:05 driver-btm-soc.c:2270:check_system_work: The avg rate is 39555.35 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-23 09:56:32 driver-btm-soc.c:2270:check_system_work: The avg rate is 39666.07 in 30 mins, PCB temperature between 44 ~ 56. 2020-03-23 10:27:00 driver-btm-soc.c:2270:check_system_work: The avg rate is 40091.27 in 30 mins, PCB temperature between 44 ~ 56. 2020-03-23 10:57:27 driver-btm-soc.c:2270:check_system_work: The avg rate is 39852.63 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-23 11:27:55 driver-btm-soc.c:2270:check_system_work: The avg rate is 39709.93 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-23 11:58:22 driver-btm-soc.c:2270:check_system_work: The avg rate is 39706.39 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-23 12:28:50 driver-btm-soc.c:2270:check_system_work: The avg rate is 39887.37 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-23 12:59:17 driver-btm-soc.c:2270:check_system_work: The avg rate is 39951.93 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-23 13:29:45 driver-btm-soc.c:2270:check_system_work: The avg rate is 39974.58 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-23 14:00:12 driver-btm-soc.c:2270:check_system_work: The avg rate is 39963.36 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-23 14:30:40 driver-btm-soc.c:2270:check_system_work: The avg rate is 40108.11 in 30 mins, PCB temperature between 49 ~ 58. 2020-03-23 15:01:08 driver-btm-soc.c:2270:check_system_work: The avg rate is 39889.17 in 30 mins, PCB temperature between 49 ~ 58. 2020-03-23 15:31:35 driver-btm-soc.c:2270:check_system_work: The avg rate is 39749.12 in 30 mins, PCB temperature between 49 ~ 57. 2020-03-23 16:02:03 driver-btm-soc.c:2270:check_system_work: The avg rate is 39718.95 in 30 mins, PCB temperature between 49 ~ 57. 2020-03-23 16:32:30 driver-btm-soc.c:2270:check_system_work: The avg rate is 39755.14 in 30 mins, PCB temperature between 49 ~ 57. 2020-03-23 17:02:58 driver-btm-soc.c:2270:check_system_work: The avg rate is 39774.29 in 30 mins, PCB temperature between 46 ~ 57. 2020-03-23 17:33:25 driver-btm-soc.c:2270:check_system_work: The avg rate is 39915.22 in 30 mins, PCB temperature between 45 ~ 55. 2020-03-23 18:03:53 driver-btm-soc.c:2270:check_system_work: The avg rate is 39904.81 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-23 18:34:20 driver-btm-soc.c:2270:check_system_work: The avg rate is 39960.75 in 30 mins, PCB temperature between 45 ~ 57. 2020-03-23 19:04:48 driver-btm-soc.c:2270:check_system_work: The avg rate is 39908.60 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-23 19:35:16 driver-btm-soc.c:2270:check_system_work: The avg rate is 39844.06 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-23 20:05:43 driver-btm-soc.c:2270:check_system_work: The avg rate is 39918.23 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-23 20:36:10 driver-btm-soc.c:2270:check_system_work: The avg rate is 39768.88 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-23 21:06:38 driver-btm-soc.c:2270:check_system_work: The avg rate is 39889.94 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-23 21:37:06 driver-btm-soc.c:2270:check_system_work: The avg rate is 39715.95 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-23 22:07:33 driver-btm-soc.c:2270:check_system_work: The avg rate is 39654.63 in 30 mins, PCB temperature between 49 ~ 57. 2020-03-23 22:38:01 driver-btm-soc.c:2270:check_system_work: The avg rate is 39450.69 in 30 mins, PCB temperature between 49 ~ 57. 2020-03-23 23:08:29 driver-btm-soc.c:2270:check_system_work: The avg rate is 39670.23 in 30 mins, PCB temperature between 49 ~ 57. 2020-03-23 23:38:56 driver-btm-soc.c:2270:check_system_work: The avg rate is 40015.12 in 30 mins, PCB temperature between 49 ~ 57. 2020-03-24 00:09:24 driver-btm-soc.c:2270:check_system_work: The avg rate is 40007.06 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-24 00:39:51 driver-btm-soc.c:2270:check_system_work: The avg rate is 39796.66 in 30 mins, PCB temperature between 47 ~ 56. 2020-03-24 01:10:19 driver-btm-soc.c:2270:check_system_work: The avg rate is 39733.99 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-24 01:40:46 driver-btm-soc.c:2270:check_system_work: The avg rate is 39693.75 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-24 02:11:14 driver-btm-soc.c:2270:check_system_work: The avg rate is 40085.86 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-24 02:41:41 driver-btm-soc.c:2270:check_system_work: The avg rate is 39888.14 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-24 03:12:09 driver-btm-soc.c:2270:check_system_work: The avg rate is 40038.34 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-24 03:42:36 driver-btm-soc.c:2270:check_system_work: The avg rate is 39919.43 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-24 04:13:04 driver-btm-soc.c:2270:check_system_work: The avg rate is 39537.31 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-24 04:43:31 driver-btm-soc.c:2270:check_system_work: The avg rate is 39695.56 in 30 mins, PCB temperature between 43 ~ 55. 2020-03-24 05:13:59 driver-btm-soc.c:2270:check_system_work: The avg rate is 39952.33 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-24 05:44:26 driver-btm-soc.c:2270:check_system_work: The avg rate is 39776.20 in 30 mins, PCB temperature between 44 ~ 56. 2020-03-24 06:14:54 driver-btm-soc.c:2270:check_system_work: The avg rate is 39724.37 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-24 06:45:21 driver-btm-soc.c:2270:check_system_work: The avg rate is 39707.59 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-24 07:15:49 driver-btm-soc.c:2270:check_system_work: The avg rate is 39459.71 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-24 07:46:17 driver-btm-soc.c:2270:check_system_work: The avg rate is 39707.52 in 30 mins, PCB temperature between 44 ~ 56. 2020-03-24 08:16:44 driver-btm-soc.c:2270:check_system_work: The avg rate is 39894.16 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-24 08:47:11 driver-btm-soc.c:2270:check_system_work: The avg rate is 39595.05 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-24 09:17:39 driver-btm-soc.c:2270:check_system_work: The avg rate is 39954.34 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-24 09:48:07 driver-btm-soc.c:2270:check_system_work: The avg rate is 39920.45 in 30 mins, PCB temperature between 45 ~ 57. 2020-03-24 10:18:34 driver-btm-soc.c:2270:check_system_work: The avg rate is 39971.79 in 30 mins, PCB temperature between 46 ~ 57. 2020-03-24 10:49:02 driver-btm-soc.c:2270:check_system_work: The avg rate is 40081.65 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-24 11:19:29 driver-btm-soc.c:2270:check_system_work: The avg rate is 39989.84 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-24 11:49:57 driver-btm-soc.c:2270:check_system_work: The avg rate is 39653.39 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-24 12:20:24 driver-btm-soc.c:2270:check_system_work: The avg rate is 39536.08 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-24 12:50:52 driver-btm-soc.c:2270:check_system_work: The avg rate is 40069.62 in 30 mins, PCB temperature between 48 ~ 58. 2020-03-24 13:21:19 driver-btm-soc.c:2270:check_system_work: The avg rate is 39832.77 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-24 13:51:47 driver-btm-soc.c:2270:check_system_work: The avg rate is 40010.07 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-24 14:22:14 driver-btm-soc.c:2270:check_system_work: The avg rate is 39908.60 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-24 14:52:42 driver-btm-soc.c:2270:check_system_work: The avg rate is 40160.44 in 30 mins, PCB temperature between 44 ~ 56. 2020-03-24 15:23:09 driver-btm-soc.c:2270:check_system_work: The avg rate is 39953.13 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-24 15:53:37 driver-btm-soc.c:2270:check_system_work: The avg rate is 39551.74 in 30 mins, PCB temperature between 44 ~ 56. 2020-03-24 16:24:05 driver-btm-soc.c:2270:check_system_work: The avg rate is 39736.40 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-24 16:54:32 driver-btm-soc.c:2270:check_system_work: The avg rate is 39821.34 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-24 17:25:00 driver-btm-soc.c:2270:check_system_work: The avg rate is 39978.79 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-24 17:55:27 driver-btm-soc.c:2270:check_system_work: The avg rate is 39930.87 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-24 18:25:55 driver-btm-soc.c:2270:check_system_work: The avg rate is 39990.22 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-24 18:56:22 driver-btm-soc.c:2270:check_system_work: The avg rate is 39730.46 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-24 19:26:50 driver-btm-soc.c:2270:check_system_work: The avg rate is 39993.23 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-24 19:57:17 driver-btm-soc.c:2270:check_system_work: The avg rate is 39845.41 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-24 20:27:45 driver-btm-soc.c:2270:check_system_work: The avg rate is 39648.58 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-24 20:58:13 driver-btm-soc.c:2270:check_system_work: The avg rate is 39936.09 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-24 21:28:40 driver-btm-soc.c:2270:check_system_work: The avg rate is 39566.77 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-24 21:59:08 driver-btm-soc.c:2270:check_system_work: The avg rate is 39823.61 in 30 mins, PCB temperature between 47 ~ 56. 2020-03-24 22:29:35 driver-btm-soc.c:2270:check_system_work: The avg rate is 39638.38 in 30 mins, PCB temperature between 47 ~ 56. 2020-03-24 23:00:03 driver-btm-soc.c:2270:check_system_work: The avg rate is 39592.64 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-24 23:30:30 driver-btm-soc.c:2270:check_system_work: The avg rate is 39927.25 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-25 00:00:58 driver-btm-soc.c:2270:check_system_work: The avg rate is 39940.90 in 30 mins, PCB temperature between 47 ~ 56. 2020-03-25 00:31:26 driver-btm-soc.c:2270:check_system_work: The avg rate is 39922.25 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-25 01:01:53 driver-btm-soc.c:2270:check_system_work: The avg rate is 39601.07 in 30 mins, PCB temperature between 47 ~ 56. 2020-03-25 01:32:21 driver-btm-soc.c:2270:check_system_work: The avg rate is 39620.31 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-25 02:02:48 driver-btm-soc.c:2270:check_system_work: The avg rate is 39945.31 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-25 02:33:16 driver-btm-soc.c:2270:check_system_work: The avg rate is 39880.15 in 30 mins, PCB temperature between 46 ~ 57. 2020-03-25 03:03:43 driver-btm-soc.c:2270:check_system_work: The avg rate is 40058.79 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-25 03:34:11 driver-btm-soc.c:2270:check_system_work: The avg rate is 40067.48 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-25 04:04:39 driver-btm-soc.c:2270:check_system_work: The avg rate is 39866.92 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-25 04:35:06 driver-btm-soc.c:2270:check_system_work: The avg rate is 39569.78 in 30 mins, PCB temperature between 46 ~ 57. 2020-03-25 05:05:34 driver-btm-soc.c:2270:check_system_work: The avg rate is 39725.57 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-25 05:36:01 driver-btm-soc.c:2270:check_system_work: The avg rate is 39576.40 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-25 06:06:29 driver-btm-soc.c:2270:check_system_work: The avg rate is 40073.23 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-25 06:36:57 driver-btm-soc.c:2270:check_system_work: The avg rate is 40061.80 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-25 07:07:24 driver-btm-soc.c:2270:check_system_work: The avg rate is 39870.08 in 30 mins, PCB temperature between 44 ~ 55. 2020-03-25 07:37:51 driver-btm-soc.c:2270:check_system_work: The avg rate is 40168.86 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-25 08:08:19 driver-btm-soc.c:2270:check_system_work: The avg rate is 39871.29 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-25 08:38:47 driver-btm-soc.c:2270:check_system_work: The avg rate is 39801.96 in 30 mins, PCB temperature between 45 ~ 57. 2020-03-25 09:09:14 driver-btm-soc.c:2270:check_system_work: The avg rate is 39983.83 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-25 09:39:42 driver-btm-soc.c:2270:check_system_work: The avg rate is 39785.12 in 30 mins, PCB temperature between 46 ~ 57. 2020-03-25 10:10:09 driver-btm-soc.c:2270:check_system_work: The avg rate is 39635.38 in 30 mins, PCB temperature between 46 ~ 57. 2020-03-25 10:40:37 driver-btm-soc.c:2270:check_system_work: The avg rate is 40029.32 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-25 11:11:05 driver-btm-soc.c:2270:check_system_work: The avg rate is 39919.25 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-25 11:41:32 driver-btm-soc.c:2270:check_system_work: The avg rate is 39893.55 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-25 12:12:00 driver-btm-soc.c:2270:check_system_work: The avg rate is 39663.02 in 30 mins, PCB temperature between 47 ~ 56. 2020-03-25 12:42:27 driver-btm-soc.c:2270:check_system_work: The avg rate is 39922.25 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-25 13:12:55 driver-btm-soc.c:2270:check_system_work: The avg rate is 39869.48 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-25 13:43:23 driver-btm-soc.c:2270:check_system_work: The avg rate is 39971.58 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-25 14:13:50 driver-btm-soc.c:2270:check_system_work: The avg rate is 39851.43 in 30 mins, PCB temperature between 49 ~ 57. 2020-03-25 14:44:18 driver-btm-soc.c:2270:check_system_work: The avg rate is 39788.73 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-25 15:14:45 driver-btm-soc.c:2270:check_system_work: The avg rate is 39939.29 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-25 15:45:13 driver-btm-soc.c:2270:check_system_work: The avg rate is 39663.02 in 30 mins, PCB temperature between 49 ~ 58. 2020-03-25 16:15:41 driver-btm-soc.c:2270:check_system_work: The avg rate is 39948.72 in 30 mins, PCB temperature between 49 ~ 58. 2020-03-25 16:46:08 driver-btm-soc.c:2270:check_system_work: The avg rate is 39529.46 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-25 17:16:36 driver-btm-soc.c:2270:check_system_work: The avg rate is 39697.90 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-25 17:47:03 driver-btm-soc.c:2270:check_system_work: The avg rate is 39732.79 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-25 18:17:31 driver-btm-soc.c:2270:check_system_work: The avg rate is 39930.26 in 30 mins, PCB temperature between 47 ~ 56. 2020-03-25 18:47:59 driver-btm-soc.c:2270:check_system_work: The avg rate is 40182.10 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-25 19:18:26 driver-btm-soc.c:2270:check_system_work: The avg rate is 39684.12 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-25 19:48:54 driver-btm-soc.c:2270:check_system_work: The avg rate is 40059.39 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-25 20:19:21 driver-btm-soc.c:2270:check_system_work: The avg rate is 39982.02 in 30 mins, PCB temperature between 44 ~ 56. 2020-03-25 20:49:49 driver-btm-soc.c:2270:check_system_work: The avg rate is 39736.40 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-25 21:20:16 driver-btm-soc.c:2270:check_system_work: The avg rate is 39435.65 in 30 mins, PCB temperature between 49 ~ 57. 2020-03-25 21:50:44 driver-btm-soc.c:2270:check_system_work: The avg rate is 39872.49 in 30 mins, PCB temperature between 49 ~ 57. 2020-03-25 22:21:12 driver-btm-soc.c:2270:check_system_work: The avg rate is 39765.27 in 30 mins, PCB temperature between 50 ~ 58. 2020-03-25 22:51:39 driver-btm-soc.c:2270:check_system_work: The avg rate is 39897.16 in 30 mins, PCB temperature between 50 ~ 58. 2020-03-25 23:22:07 driver-btm-soc.c:2270:check_system_work: The avg rate is 39877.14 in 30 mins, PCB temperature between 51 ~ 59. 2020-03-25 23:52:34 driver-btm-soc.c:2270:check_system_work: The avg rate is 39779.81 in 30 mins, PCB temperature between 51 ~ 59. 2020-03-26 00:23:02 driver-btm-soc.c:2270:check_system_work: The avg rate is 40073.23 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-26 00:53:29 driver-btm-soc.c:2270:check_system_work: The avg rate is 39918.83 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-26 01:23:57 driver-btm-soc.c:2270:check_system_work: The avg rate is 39900.60 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-26 01:54:25 driver-btm-soc.c:2270:check_system_work: The avg rate is 39825.42 in 30 mins, PCB temperature between 47 ~ 56. 2020-03-26 02:24:52 driver-btm-soc.c:2270:check_system_work: The avg rate is 39659.45 in 30 mins, PCB temperature between 47 ~ 56. 2020-03-26 02:55:20 driver-btm-soc.c:2270:check_system_work: The avg rate is 39960.15 in 30 mins, PCB temperature between 47 ~ 56. 2020-03-26 03:25:48 driver-btm-soc.c:2270:check_system_work: The avg rate is 39813.99 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-26 03:56:15 driver-btm-soc.c:2270:check_system_work: The avg rate is 39831.57 in 30 mins, PCB temperature between 46 ~ 57. 2020-03-26 04:26:42 driver-btm-soc.c:2270:check_system_work: The avg rate is 40291.95 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-26 04:57:10 driver-btm-soc.c:2270:check_system_work: The avg rate is 40099.09 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-26 05:27:38 driver-btm-soc.c:2270:check_system_work: The avg rate is 39836.24 in 30 mins, PCB temperature between 46 ~ 57. 2020-03-26 05:58:05 driver-btm-soc.c:2270:check_system_work: The avg rate is 39687.13 in 30 mins, PCB temperature between 46 ~ 57. 2020-03-26 06:28:32 driver-btm-soc.c:2270:check_system_work: The avg rate is 39922.86 in 30 mins, PCB temperature between 45 ~ 57. 2020-03-26 06:59:00 driver-btm-soc.c:2270:check_system_work: The avg rate is 39898.37 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-26 07:29:27 driver-btm-soc.c:2270:check_system_work: The avg rate is 39521.03 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-26 07:59:55 driver-btm-soc.c:2270:check_system_work: The avg rate is 39913.23 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-26 08:30:23 driver-btm-soc.c:2270:check_system_work: The avg rate is 39685.27 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-26 09:00:50 driver-btm-soc.c:2270:check_system_work: The avg rate is 39720.83 in 30 mins, PCB temperature between 44 ~ 56. 2020-03-26 09:31:18 driver-btm-soc.c:2270:check_system_work: The avg rate is 39659.41 in 30 mins, PCB temperature between 44 ~ 56. 2020-03-26 10:01:45 driver-btm-soc.c:2270:check_system_work: The avg rate is 39731.67 in 30 mins, PCB temperature between 44 ~ 56. 2020-03-26 10:32:13 driver-btm-soc.c:2270:check_system_work: The avg rate is 39431.44 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-26 11:02:40 driver-btm-soc.c:2270:check_system_work: The avg rate is 40021.14 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-26 11:33:08 driver-btm-soc.c:2270:check_system_work: The avg rate is 39939.70 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-26 12:03:35 driver-btm-soc.c:2270:check_system_work: The avg rate is 39648.01 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-26 12:34:03 driver-btm-soc.c:2270:check_system_work: The avg rate is 39887.97 in 30 mins, PCB temperature between 49 ~ 57. 2020-03-26 13:04:30 driver-btm-soc.c:2270:check_system_work: The avg rate is 39974.80 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-26 13:34:58 driver-btm-soc.c:2270:check_system_work: The avg rate is 39722.56 in 30 mins, PCB temperature between 48 ~ 58. 2020-03-26 14:05:25 driver-btm-soc.c:2270:check_system_work: The avg rate is 39759.85 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-26 14:35:53 driver-btm-soc.c:2270:check_system_work: The avg rate is 39734.67 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-26 15:06:21 driver-btm-soc.c:2270:check_system_work: The avg rate is 39650.38 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-26 15:36:48 driver-btm-soc.c:2270:check_system_work: The avg rate is 40012.71 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-26 16:07:16 driver-btm-soc.c:2270:check_system_work: The avg rate is 39740.61 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-26 16:37:44 driver-btm-soc.c:2270:check_system_work: The avg rate is 39878.95 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-26 17:08:11 driver-btm-soc.c:2270:check_system_work: The avg rate is 39797.87 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-26 17:38:39 driver-btm-soc.c:2270:check_system_work: The avg rate is 39783.31 in 30 mins, PCB temperature between 49 ~ 57. 2020-03-26 18:09:06 driver-btm-soc.c:2270:check_system_work: The avg rate is 39730.46 in 30 mins, PCB temperature between 49 ~ 58. 2020-03-26 18:39:34 driver-btm-soc.c:2270:check_system_work: The avg rate is 39801.96 in 30 mins, PCB temperature between 49 ~ 58. 2020-03-26 19:10:01 driver-btm-soc.c:2270:check_system_work: The avg rate is 39738.29 in 30 mins, PCB temperature between 49 ~ 57. 2020-03-26 19:40:29 driver-btm-soc.c:2270:check_system_work: The avg rate is 39699.10 in 30 mins, PCB temperature between 49 ~ 57. 2020-03-26 20:10:56 driver-btm-soc.c:2270:check_system_work: The avg rate is 39596.25 in 30 mins, PCB temperature between 48 ~ 56. 2020-03-26 20:41:24 driver-btm-soc.c:2270:check_system_work: The avg rate is 40016.93 in 30 mins, PCB temperature between 49 ~ 57. 2020-03-26 21:11:51 driver-btm-soc.c:2270:check_system_work: The avg rate is 39708.20 in 30 mins, PCB temperature between 49 ~ 57. 2020-03-26 21:42:19 driver-btm-soc.c:2270:check_system_work: The avg rate is 39497.61 in 30 mins, PCB temperature between 49 ~ 57. 2020-03-26 22:12:46 driver-btm-soc.c:2270:check_system_work: The avg rate is 39891.15 in 30 mins, PCB temperature between 49 ~ 57. 2020-03-26 22:43:14 driver-btm-soc.c:2270:check_system_work: The avg rate is 39837.45 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-26 23:13:41 driver-btm-soc.c:2270:check_system_work: The avg rate is 39776.80 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-26 23:44:09 driver-btm-soc.c:2270:check_system_work: The avg rate is 39773.69 in 30 mins, PCB temperature between 48 ~ 57.
I have more but this is what you need to do
|
|
|
my machine has been running for over 2 weeks so my log is long section 1 fits on this post. Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 195352K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 34024K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 20984K (cc682000 - cdb00000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAGAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 7/3, WL threshold: 4096, image sequence number: 4244297529 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 01559AD8-7B6A-42E6-A3FE-EDF3659527A9, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 529/159, WL threshold: 4096, image sequence number: 4185749592 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): recovery needed UBIFS (ubi1:0): recovery completed UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 4829CF2C-7435-4146-B2FD-0826AAE8443A, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready macb e000b000.ethernet eth0: link down macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xab011 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 macb e000b000.ethernet eth0: link down macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) random: nonblocking pool is initialized [1970-01-01 00:00:53.350] httpListenThread start ret=0 [1970-01-01 00:01:23.352] start listen on 6060 ... [1970-01-01 00:05:58.629] set_start_time_point total_tv_start_sys=359 total_tv_end_sys=360
1970-01-01 00:00:53 driver-btm-soc.c:3297:init_freq_mode: This is scan-user version 1970-01-01 00:00:53 driver-btm-soc.c:4118:bitmain_soc_init: opt_multi_version=1 1970-01-01 00:00:53 driver-btm-soc.c:4119:bitmain_soc_init: opt_bitmain_ab=1 1970-01-01 00:00:53 driver-btm-soc.c:4120:bitmain_soc_init: opt_bitmain_work_mode=0 1970-01-01 00:00:53 driver-btm-soc.c:3658:_show_sn: no SN got, please write SN to /nvdata/sn 1970-01-01 00:00:53 driver-btm-soc.c:3328:init_phy_mem_nonce2_jobid_address: Detect 256MB control board of XILINX 1970-01-01 00:00:53 driver-btm-soc.c:4126:bitmain_soc_init: Miner compile time: Fri May 24 21:07:07 CST 2019 1970-01-01 00:00:53 driver-btm-soc.c:4128:bitmain_soc_init: last commit version: c416f93 commit time: 2019-05-24 21:03:40 build: 2019-05-24 21:14:44 1970-01-01 00:00:53 driver-btm-soc.c:3360:check_fan_multi: check fan for 20 times... 1970-01-01 00:00:55 driver-btm-soc.c:3436:init_miner_version: miner ID : 81620d025c208854 1970-01-01 00:00:55 driver-btm-soc.c:3442:init_miner_version: FPGA Version = 0xB011 1970-01-01 00:00:55 driver-btm-soc.c:405:check_chain: !! chain[0]is exist 1970-01-01 00:00:55 driver-btm-soc.c:405:check_chain: !! chain[1]is exist 1970-01-01 00:00:55 driver-btm-soc.c:405:check_chain: !! chain[2]is exist 1970-01-01 00:00:59 driver-btm-soc.c:3864:get_product_id: product_id[0] = 1 1970-01-01 00:00:59 driver-btm-soc.c:3864:get_product_id: product_id[1] = 1 1970-01-01 00:00:59 driver-btm-soc.c:3864:get_product_id: product_id[2] = 1 1970-01-01 00:00:59 driver-btm-soc.c:4032:bitmain_board_init: g_product_id = 1 1970-01-01 00:00:59 driver-btm-soc.c:3900:get_ccdly_opt: ccdly_opt[0] = 1 1970-01-01 00:00:59 driver-btm-soc.c:3900:get_ccdly_opt: ccdly_opt[1] = 1 1970-01-01 00:00:59 driver-btm-soc.c:3900:get_ccdly_opt: ccdly_opt[2] = 1 1970-01-01 00:00:59 driver-btm-soc.c:4041:bitmain_board_init: g_ccdly_opt = 1 1970-01-01 00:00:59 driver-btm-soc.c:3716:_set_project_type: Project type: Antminer T17 1970-01-01 00:00:59 driver-btm-soc.c:3458:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100 1970-01-01 00:00:59 driver-btm-soc.c:3459:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100 1970-01-01 00:00:59 driver-btm-soc.c:3458:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100 1970-01-01 00:00:59 driver-btm-soc.c:3459:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100 1970-01-01 00:00:59 driver-btm-soc.c:3458:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100 1970-01-01 00:00:59 driver-btm-soc.c:3459:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100 1970-01-01 00:01:00 pic.c:619:pic_reset: chain[0] ok 1970-01-01 00:01:04 pic.c:898:jump_to_app_from_loader: chain[0] ok 1970-01-01 00:01:05 pic.c:619:pic_reset: chain[1] ok 1970-01-01 00:01:09 pic.c:898:jump_to_app_from_loader: chain[1] ok 1970-01-01 00:01:10 pic.c:619:pic_reset: chain[2] ok 1970-01-01 00:01:14 pic.c:898:jump_to_app_from_loader: chain[2] ok 1970-01-01 00:01:14 driver-btm-soc.c:4062:bitmain_board_init: Enter 30s sleep to make sure power release finish. 1970-01-01 00:01:14 driver-btm-soc.c:1177:heart_beat_func_one_chain: for chain 2 1970-01-01 00:01:14 driver-btm-soc.c:1177:heart_beat_func_one_chain: for chain 1 1970-01-01 00:01:14 driver-btm-soc.c:1177:heart_beat_func_one_chain: for chain 0 1970-01-01 00:01:44 power.c:187:power_init: power init ... 1970-01-01 00:01:44 power.c:177:power_check_protocol_type: power type APW9 3600W 1970-01-01 00:01:44 power.c:154:power_on: init gpio907 1970-01-01 00:01:45 power.c:643:set_iic_power_to_highest_voltage: setting to voltage: 17.00 ... 1970-01-01 00:01:47 power.c:251:check_voltage_multi: retry time: 0 1970-01-01 00:01:48 power.c:213:get_average_voltage: chain[0], voltage is: 20.487715 1970-01-01 00:01:48 power.c:213:get_average_voltage: chain[1], voltage is: 20.279531 1970-01-01 00:01:49 power.c:213:get_average_voltage: chain[2], voltage is: 19.936640 1970-01-01 00:01:49 power.c:224:get_average_voltage: aveage voltage is: 20.234629 1970-01-01 00:01:49 power.c:237:check_voltage: target_vol = 17.00, actural_vol = 20.23, more than 0.5v diff. 1970-01-01 00:01:50 power.c:251:check_voltage_multi: retry time: 1 1970-01-01 00:01:51 power.c:213:get_average_voltage: chain[0], voltage is: 19.152890 1970-01-01 00:01:52 power.c:213:get_average_voltage: chain[1], voltage is: 19.005937 1970-01-01 00:01:52 power.c:213:get_average_voltage: chain[2], voltage is: 18.705908 1970-01-01 00:01:52 power.c:224:get_average_voltage: aveage voltage is: 18.954912 1970-01-01 00:01:52 power.c:237:check_voltage: target_vol = 17.00, actural_vol = 18.95, more than 0.5v diff. 1970-01-01 00:01:53 power.c:251:check_voltage_multi: retry time: 2 1970-01-01 00:01:54 power.c:213:get_average_voltage: chain[0], voltage is: 18.265049 1970-01-01 00:01:54 power.c:213:get_average_voltage: chain[1], voltage is: 18.093603 1970-01-01 00:01:55 power.c:213:get_average_voltage: chain[2], voltage is: 17.818066 1970-01-01 00:01:55 power.c:224:get_average_voltage: aveage voltage is: 18.058906 1970-01-01 00:01:55 power.c:237:check_voltage: target_vol = 17.00, actural_vol = 18.06, more than 0.5v diff. 1970-01-01 00:01:56 power.c:251:check_voltage_multi: retry time: 3 1970-01-01 00:01:56 power.c:213:get_average_voltage: chain[0], voltage is: 17.395576 1970-01-01 00:01:57 power.c:213:get_average_voltage: chain[1], voltage is: 17.254746 1970-01-01 00:01:58 power.c:213:get_average_voltage: chain[2], voltage is: 17.003701 1970-01-01 00:01:58 power.c:224:get_average_voltage: aveage voltage is: 17.218008 1970-01-01 00:01:58 power.c:593:set_iic_power_by_voltage: now set voltage to : 17.000000 1970-01-01 00:01:58 zynq.c:192:set_reset_hashboard: set_reset_hashboard = 0x0000ffff 1970-01-01 00:02:02 pic.c:234:hashboard_power_cntl: [1] ok, i2c=0! 1970-01-01 00:02:02 zynq.c:192:set_reset_hashboard: set_reset_hashboard = 0x0000fffe 1970-01-01 00:02:06 driver-btm-soc.c:3799:check_asic_number_with_power_on: Chain[0]: find 9 asic, times 0 1970-01-01 00:02:06 zynq.c:192:set_reset_hashboard: set_reset_hashboard = 0x0000ffff 1970-01-01 00:02:10 pic.c:234:hashboard_power_cntl: [1] ok, i2c=0! 1970-01-01 00:02:10 zynq.c:192:set_reset_hashboard: set_reset_hashboard = 0x0000fffe 1970-01-01 00:02:14 driver-btm-soc.c:3799:check_asic_number_with_power_on: Chain[0]: find 30 asic, times 1 1970-01-01 00:02:14 zynq.c:192:set_reset_hashboard: set_reset_hashboard = 0x0000fffe 1970-01-01 00:02:17 pic.c:234:hashboard_power_cntl: [1] ok, i2c=1! 1970-01-01 00:02:17 zynq.c:192:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 1970-01-01 00:02:21 driver-btm-soc.c:3799:check_asic_number_with_power_on: Chain[1]: find 30 asic, times 0 1970-01-01 00:02:21 zynq.c:192:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 1970-01-01 00:02:24 pic.c:234:hashboard_power_cntl: [1] ok, i2c=2! 1970-01-01 00:02:24 zynq.c:192:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 1970-01-01 00:02:28 driver-btm-soc.c:3799:check_asic_number_with_power_on: Chain[2]: find 30 asic, times 0 1970-01-01 00:02:28 chip139x.c:738:set_order_clock: chain[0]: set order clock, stragegy 3 1970-01-01 00:02:28 chip139x.c:738:set_order_clock: chain[1]: set order clock, stragegy 3 1970-01-01 00:02:28 chip139x.c:738:set_order_clock: chain[2]: set order clock, stragegy 3 1970-01-01 00:02:34 chip139x.c:848:set_core_clock_delay_control: pwth_sel = 3, ccdly_sel = 2 1970-01-01 00:02:34 chip139x.c:863:set_core_clock_delay_control: set CLOCK_DELAY_CTRL to 0xb4 voltage[0] = 1730 voltage[1] = 1730 voltage[2] = 1730 1970-01-01 00:02:34 power.c:267:set_working_voltage: working_voltage = 17.300000 sensor type = 1,sensor num = 4 sensor pos: 9 7 22 24 0 0 0 0 sensor offset: 0 0 0 0 0 0 0 0 1970-01-01 00:02:34 temperature.c:356:calibration_sensor_offset: chain[0] temp chip I2C addr=0x98 1970-01-01 00:02:34 temperature.c:420:calibration_sensor_offset: Chain[0] chip[8] use PIC middle temp offset=0, typeID=55 1970-01-01 00:02:34 temperature.c:420:calibration_sensor_offset: Chain[0] chip[6] use PIC middle temp offset=0, typeID=55 1970-01-01 00:02:35 temperature.c:420:calibration_sensor_offset: Chain[0] chip[21] use PIC middle temp offset=0, typeID=55 1970-01-01 00:02:35 temperature.c:420:calibration_sensor_offset: Chain[0] chip[23] use PIC middle temp offset=0, typeID=55 sensor type = 1,sensor num = 4 sensor pos: 9 7 22 24 0 0 0 0 sensor offset: 0 0 0 0 0 0 0 0 1970-01-01 00:02:35 temperature.c:356:calibration_sensor_offset: chain[1] temp chip I2C addr=0x98 1970-01-01 00:02:35 temperature.c:420:calibration_sensor_offset: Chain[1] chip[8] use PIC middle temp offset=0, typeID=55 1970-01-01 00:02:36 temperature.c:420:calibration_sensor_offset: Chain[1] chip[6] use PIC middle temp offset=0, typeID=55 1970-01-01 00:02:36 temperature.c:420:calibration_sensor_offset: Chain[1] chip[21] use PIC middle temp offset=0, typeID=55 1970-01-01 00:02:36 temperature.c:420:calibration_sensor_offset: Chain[1] chip[23] use PIC middle temp offset=0, typeID=55 sensor type = 1,sensor num = 4 sensor pos: 9 7 22 24 0 0 0 0 sensor offset: 0 0 0 0 0 0 0 0 1970-01-01 00:02:36 temperature.c:356:calibration_sensor_offset: chain[2] temp chip I2C addr=0x98 1970-01-01 00:02:37 temperature.c:420:calibration_sensor_offset: Chain[2] chip[8] use PIC middle temp offset=0, typeID=55 1970-01-01 00:02:37 temperature.c:420:calibration_sensor_offset: Chain[2] chip[6] use PIC middle temp offset=0, typeID=55 1970-01-01 00:02:38 temperature.c:420:calibration_sensor_offset: Chain[2] chip[21] use PIC middle temp offset=0, typeID=55 1970-01-01 00:02:38 temperature.c:420:calibration_sensor_offset: Chain[2] chip[23] use PIC middle temp offset=0, typeID=55 1970-01-01 00:02:40 temperature.c:446:do_calibration_temperature_sensor: bring up lowest temperature is 27 1970-01-01 00:02:40 chip139x.c:320:set_baud_one_chain: chain[0]: chip baud = 6000000, chip_divider = 7 1970-01-01 00:02:40 chip139x.c:320:set_baud_one_chain: chain[1]: chip baud = 6000000, chip_divider = 7 1970-01-01 00:02:40 chip139x.c:320:set_baud_one_chain: chain[2]: chip baud = 6000000, chip_divider = 7 1970-01-01 00:02:40 chip139x.c:277:set_baud_fpga: set fpga_baud = 6000000, fpga_divider = 3 1970-01-01 00:02:40 driver-btm-soc.c:3477:calculate_timeout: dev->timeout = 392 1970-01-01 00:02:40 freq_tuning.c:254:freq_tuning_get_max_freq: Max freq of tuning is 740 1970-01-01 00:02:40 driver-btm-soc.c:3207:increase_freq_by_frequency_list_slowly: Increase freq slowly for all chain to 640 1970-01-01 00:02:40 temperature.c:1379:get_current_lowest_temperature: current lowest temperature is 27 1970-01-01 00:02:40 driver-btm-soc.c:2890:auto_adaption_high_voltage_increase_frequency: auto adaption increase frequency from 50.000000 to 600.000000 @18.00V. 1970-01-01 00:02:40 driver-btm-soc.c:2891:auto_adaption_high_voltage_increase_frequency: index 0 2 1970-01-01 00:02:40 power.c:790:slowly_set_iic_power_to_custom_voltage: slowly setting to voltage: 18.00 ... 1970-01-01 00:02:40 power.c:570:get_power_voltage_from_iic_value: iic_index for voltage[150] = 17.174282 1970-01-01 00:02:41 temperature.c:1043:read_temp_func: bring_up_pcb_temp = 27 1970-01-01 00:02:41 temperature.c:1072:read_temp_func: PCB low 27, high 28. CHIP low 29, high 31 1970-01-01 00:02:42 power.c:570:get_power_voltage_from_iic_value: iic_index for voltage[144] = 17.341724 1970-01-01 00:02:44 temperature.c:1072:read_temp_func: PCB low 27, high 28. CHIP low 29, high 31 1970-01-01 00:02:45 power.c:570:get_power_voltage_from_iic_value: iic_index for voltage[138] = 17.509166 1970-01-01 00:02:47 temperature.c:1072:read_temp_func: PCB low 27, high 28. CHIP low 29, high 31 1970-01-01 00:02:48 power.c:570:get_power_voltage_from_iic_value: iic_index for voltage[132] = 17.676608 1970-01-01 00:02:49 temperature.c:1072:read_temp_func: PCB low 27, high 28. CHIP low 30, high 31 1970-01-01 00:02:50 power.c:570:get_power_voltage_from_iic_value: iic_index for voltage[126] = 17.844049 1970-01-01 00:02:52 temperature.c:1072:read_temp_func: PCB low 28, high 28. CHIP low 30, high 31 1970-01-01 00:02:53 power.c:570:get_power_voltage_from_iic_value: iic_index for voltage[124] = 17.899863 1970-01-01 00:02:55 temperature.c:1072:read_temp_func: PCB low 28, high 29. CHIP low 30, high 32 1970-01-01 00:02:56 power.c:570:get_power_voltage_from_iic_value: iic_index for voltage[122] = 17.955677 1970-01-01 00:02:58 temperature.c:1072:read_temp_func: PCB low 28, high 29. CHIP low 30, high 32 1970-01-01 00:02:58 power.c:570:get_power_voltage_from_iic_value: iic_index for voltage[121] = 17.983584 1970-01-01 00:03:00 temperature.c:1072:read_temp_func: PCB low 28, high 29. CHIP low 30, high 32 1970-01-01 00:03:01 power.c:570:get_power_voltage_from_iic_value: iic_index for voltage[120] = 18.011491 1970-01-01 00:03:03 temperature.c:1072:read_temp_func: PCB low 28, high 29. CHIP low 30, high 32 1970-01-01 00:03:03 power.c:251:check_voltage_multi: retry time: 0 1970-01-01 00:03:04 power.c:213:get_average_voltage: chain[0], voltage is: 18.032373 1970-01-01 00:03:05 power.c:213:get_average_voltage: chain[1], voltage is: 18.075234 1970-01-01 00:03:06 power.c:213:get_average_voltage: chain[2], voltage is: 17.989511 1970-01-01 00:03:06 power.c:224:get_average_voltage: aveage voltage is: 18.032373 1970-01-01 00:03:06 driver-btm-soc.c:2845:increase_freq_slowly: init_freq = 50.00, final_freq = 600.00, freq_step = 5.00, chain = 255 1970-01-01 00:03:06 temperature.c:1072:read_temp_func: PCB low 28, high 29. CHIP low 30, high 32 1970-01-01 00:03:08 temperature.c:1072:read_temp_func: PCB low 28, high 29. CHIP low 30, high 33 1970-01-01 00:03:11 temperature.c:1072:read_temp_func: PCB low 28, high 29. CHIP low 31, high 33 1970-01-01 00:03:14 temperature.c:1072:read_temp_func: PCB low 29, high 29. CHIP low 31, high 34 1970-01-01 00:03:16 temperature.c:1072:read_temp_func: PCB low 29, high 29. CHIP low 32, high 34 1970-01-01 00:03:19 temperature.c:1072:read_temp_func: PCB low 29, high 30. CHIP low 33, high 35 1970-01-01 00:03:22 temperature.c:1072:read_temp_func: PCB low 29, high 30. CHIP low 33, high 35 1970-01-01 00:03:24 temperature.c:1072:read_temp_func: PCB low 29, high 30. CHIP low 34, high 36 1970-01-01 00:03:27 temperature.c:1072:read_temp_func: PCB low 30, high 30. CHIP low 35, high 37 1970-01-01 00:03:30 temperature.c:1072:read_temp_func: PCB low 30, high 31. CHIP low 36, high 38 1970-01-01 00:03:32 temperature.c:1072:read_temp_func: PCB low 30, high 31. CHIP low 37, high 39 1970-01-01 00:03:35 temperature.c:1072:read_temp_func: PCB low 30, high 31. CHIP low 37, high 40 1970-01-01 00:03:38 temperature.c:1072:read_temp_func: PCB low 31, high 32. CHIP low 38, high 40 1970-01-01 00:03:41 temperature.c:1072:read_temp_func: PCB low 31, high 32. CHIP low 39, high 41 1970-01-01 00:03:43 temperature.c:1072:read_temp_func: PCB low 31, high 32. CHIP low 40, high 42 1970-01-01 00:03:46 temperature.c:1072:read_temp_func: PCB low 31, high 33. CHIP low 40, high 43 1970-01-01 00:03:49 temperature.c:1072:read_temp_func: PCB low 32, high 33. CHIP low 41, high 44 1970-01-01 00:03:51 temperature.c:1072:read_temp_func: PCB low 32, high 33. CHIP low 42, high 45 1970-01-01 00:03:54 temperature.c:1072:read_temp_func: PCB low 33, high 34. CHIP low 43, high 46 1970-01-01 00:03:57 temperature.c:1072:read_temp_func: PCB low 33, high 34. CHIP low 44, high 46 1970-01-01 00:03:59 temperature.c:1072:read_temp_func: PCB low 33, high 35. CHIP low 44, high 48 1970-01-01 00:04:02 temperature.c:1072:read_temp_func: PCB low 33, high 35. CHIP low 45, high 48 1970-01-01 00:04:05 temperature.c:1072:read_temp_func: PCB low 34, high 36. CHIP low 46, high 49 1970-01-01 00:04:07 temperature.c:1072:read_temp_func: PCB low 34, high 36. CHIP low 47, high 51 1970-01-01 00:04:10 temperature.c:1072:read_temp_func: PCB low 35, high 37. CHIP low 48, high 52 1970-01-01 00:04:13 temperature.c:1072:read_temp_func: PCB low 35, high 37. CHIP low 49, high 53 1970-01-01 00:04:16 temperature.c:1072:read_temp_func: PCB low 36, high 38. CHIP low 50, high 54 1970-01-01 00:04:18 temperature.c:1072:read_temp_func: PCB low 36, high 38. CHIP low 51, high 55 1970-01-01 00:04:21 temperature.c:1072:read_temp_func: PCB low 37, high 39. CHIP low 52, high 56 1970-01-01 00:04:24 temperature.c:1072:read_temp_func: PCB low 37, high 39. CHIP low 53, high 57 1970-01-01 00:04:26 temperature.c:1072:read_temp_func: PCB low 37, high 40. CHIP low 54, high 58 1970-01-01 00:04:29 temperature.c:1072:read_temp_func: PCB low 38, high 40. CHIP low 54, high 58 1970-01-01 00:04:32 temperature.c:1072:read_temp_func: PCB low 38, high 40. CHIP low 55, high 60 1970-01-01 00:04:34 temperature.c:1072:read_temp_func: PCB low 38, high 41. CHIP low 56, high 61 1970-01-01 00:04:37 temperature.c:1072:read_temp_func: PCB low 39, high 41. CHIP low 57, high 62 1970-01-01 00:04:40 temperature.c:1072:read_temp_func: PCB low 39, high 42. CHIP low 58, high 63 1970-01-01 00:04:42 temperature.c:1072:read_temp_func: PCB low 39, high 42. CHIP low 59, high 64 1970-01-01 00:04:45 temperature.c:1072:read_temp_func: PCB low 40, high 43. CHIP low 60, high 65 1970-01-01 00:04:48 temperature.c:1072:read_temp_func: PCB low 40, high 43. CHIP low 60, high 66 1970-01-01 00:04:51 temperature.c:1072:read_temp_func: PCB low 40, high 44. CHIP low 61, high 67 1970-01-01 00:04:53 temperature.c:1072:read_temp_func: PCB low 41, high 44. CHIP low 62, high 68 1970-01-01 00:04:56 temperature.c:1072:read_temp_func: PCB low 41, high 45. CHIP low 63, high 69 1970-01-01 00:04:57 temperature.c:1379:get_current_lowest_temperature: current lowest temperature is 41 1970-01-01 00:04:57 driver-btm-soc.c:2890:auto_adaption_high_voltage_increase_frequency: auto adaption increase frequency from 600.000000 to 640.000000 @17.80V. 1970-01-01 00:04:57 driver-btm-soc.c:2891:auto_adaption_high_voltage_increase_frequency: index 1 3 1970-01-01 00:04:57 power.c:790:slowly_set_iic_power_to_custom_voltage: slowly setting to voltage: 17.80 ... 1970-01-01 00:04:57 power.c:570:get_power_voltage_from_iic_value: iic_index for voltage[121] = 17.983584 1970-01-01 00:04:59 temperature.c:1072:read_temp_func: PCB low 42, high 46. CHIP low 64, high 70 1970-01-01 00:05:00 power.c:570:get_power_voltage_from_iic_value: iic_index for voltage[122] = 17.955677 1970-01-01 00:05:01 temperature.c:1072:read_temp_func: PCB low 42, high 46. CHIP low 64, high 70 1970-01-01 00:05:03 power.c:570:get_power_voltage_from_iic_value: iic_index for voltage[123] = 17.927770 1970-01-01 00:05:04 temperature.c:1072:read_temp_func: PCB low 42, high 47. CHIP low 64, high 71 1970-01-01 00:05:05 power.c:570:get_power_voltage_from_iic_value: iic_index for voltage[124] = 17.899863 1970-01-01 00:05:07 temperature.c:1072:read_temp_func: PCB low 43, high 47. CHIP low 64, high 71 1970-01-01 00:05:08 power.c:570:get_power_voltage_from_iic_value: iic_index for voltage[125] = 17.871956 1970-01-01 00:05:09 temperature.c:1072:read_temp_func: PCB low 43, high 47. CHIP low 64, high 72 1970-01-01 00:05:10 power.c:570:get_power_voltage_from_iic_value: iic_index for voltage[126] = 17.844049 1970-01-01 00:05:12 temperature.c:1072:read_temp_func: PCB low 43, high 48. CHIP low 64, high 72 1970-01-01 00:05:13 power.c:570:get_power_voltage_from_iic_value: iic_index for voltage[127] = 17.816142 1970-01-01 00:05:15 temperature.c:1072:read_temp_func: PCB low 43, high 48. CHIP low 64, high 72 1970-01-01 00:05:16 power.c:251:check_voltage_multi: retry time: 0 1970-01-01 00:05:16 power.c:213:get_average_voltage: chain[0], voltage is: 17.811943 1970-01-01 00:05:17 power.c:213:get_average_voltage: chain[1], voltage is: 17.848681 1970-01-01 00:05:17 power.c:213:get_average_voltage: chain[2], voltage is: 17.744590 1970-01-01 00:05:17 power.c:224:get_average_voltage: aveage voltage is: 17.801738 1970-01-01 00:05:17 driver-btm-soc.c:2845:increase_freq_slowly: init_freq = 600.00, final_freq = 640.00, freq_step = 5.00, chain = 255 1970-01-01 00:05:17 temperature.c:1072:read_temp_func: PCB low 43, high 48. CHIP low 64, high 73 1970-01-01 00:05:20 temperature.c:1072:read_temp_func: PCB low 43, high 49. CHIP low 65, high 73 1970-01-01 00:05:23 temperature.c:1072:read_temp_func: PCB low 44, high 49. CHIP low 65, high 74 1970-01-01 00:05:25 driver-btm-soc.c:3219:increase_freq_by_frequency_list_slowly: Increase freq slowly for chain 0 to 670 1970-01-01 00:05:25 temperature.c:1379:get_current_lowest_temperature: current lowest temperature is 44 1970-01-01 00:05:25 driver-btm-soc.c:2890:auto_adaption_high_voltage_increase_frequency: auto adaption increase frequency from 640.000000 to 650.000000 @17.80V. 1970-01-01 00:05:25 driver-btm-soc.c:2891:auto_adaption_high_voltage_increase_frequency: index 1 3 1970-01-01 00:05:25 driver-btm-soc.c:2845:increase_freq_slowly: init_freq = 640.00, final_freq = 650.00, freq_step = 5.00, chain = 0 1970-01-01 00:05:25 temperature.c:1072:read_temp_func: PCB low 44, high 49. CHIP low 66, high 74 1970-01-01 00:05:27 temperature.c:1379:get_current_lowest_temperature: current lowest temperature is 44 1970-01-01 00:05:27 driver-btm-soc.c:2890:auto_adaption_high_voltage_increase_frequency: auto adaption increase frequency from 650.000000 to 670.000000 @17.80V. 1970-01-01 00:05:27 driver-btm-soc.c:2891:auto_adaption_high_voltage_increase_frequency: index 2 3 1970-01-01 00:05:27 driver-btm-soc.c:2845:increase_freq_slowly: init_freq = 650.00, final_freq = 670.00, freq_step = 5.00, chain = 0 1970-01-01 00:05:28 temperature.c:1072:read_temp_func: PCB low 44, high 49. CHIP low 66, high 75 1970-01-01 00:05:31 temperature.c:1072:read_temp_func: PCB low 44, high 50. CHIP low 66, high 75 1970-01-01 00:05:31 driver-btm-soc.c:3219:increase_freq_by_frequency_list_slowly: Increase freq slowly for chain 1 to 670 1970-01-01 00:05:31 temperature.c:1379:get_current_lowest_temperature: current lowest temperature is 44 1970-01-01 00:05:31 driver-btm-soc.c:2890:auto_adaption_high_voltage_increase_frequency: auto adaption increase frequency from 640.000000 to 650.000000 @17.80V. 1970-01-01 00:05:31 driver-btm-soc.c:2891:auto_adaption_high_voltage_increase_frequency: index 1 3 1970-01-01 00:05:31 driver-btm-soc.c:2845:increase_freq_slowly: init_freq = 640.00, final_freq = 650.00, freq_step = 5.00, chain = 1 1970-01-01 00:05:33 temperature.c:1379:get_current_lowest_temperature: current lowest temperature is 44 1970-01-01 00:05:33 driver-btm-soc.c:2890:auto_adaption_high_voltage_increase_frequency: auto adaption increase frequency from 650.000000 to 670.000000 @17.80V. 1970-01-01 00:05:33 driver-btm-soc.c:2891:auto_adaption_high_voltage_increase_frequency: index 2 3 1970-01-01 00:05:33 driver-btm-soc.c:2845:increase_freq_slowly: init_freq = 650.00, final_freq = 670.00, freq_step = 5.00, chain = 1 1970-01-01 00:05:34 temperature.c:1072:read_temp_func: PCB low 44, high 50. CHIP low 67, high 75 1970-01-01 00:05:36 temperature.c:1072:read_temp_func: PCB low 44, high 50. CHIP low 67, high 76 1970-01-01 00:05:37 driver-btm-soc.c:2993:set_timeout: freq 670 final timeout=175 1970-01-01 00:05:37 power.c:808:slowly_set_iic_power_to_working_voltage: slowly setting to voltage: 17.30 ... 1970-01-01 00:05:37 power.c:570:get_power_voltage_from_iic_value: iic_index for voltage[130] = 17.732421 1970-01-01 00:05:39 temperature.c:1072:read_temp_func: PCB low 44, high 50. CHIP low 67, high 77 1970-01-01 00:05:40 power.c:570:get_power_voltage_from_iic_value: iic_index for voltage[133] = 17.648701 1970-01-01 00:05:42 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 66, high 77 1970-01-01 00:05:42 power.c:570:get_power_voltage_from_iic_value: iic_index for voltage[136] = 17.564980 1970-01-01 00:05:44 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 66, high 77 1970-01-01 00:05:45 power.c:570:get_power_voltage_from_iic_value: iic_index for voltage[139] = 17.481259 1970-01-01 00:05:47 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 66, high 77 1970-01-01 00:05:48 power.c:570:get_power_voltage_from_iic_value: iic_index for voltage[142] = 17.397538 1970-01-01 00:05:50 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 66, high 77 1970-01-01 00:05:50 power.c:570:get_power_voltage_from_iic_value: iic_index for voltage[144] = 17.341724 1970-01-01 00:05:52 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 65, high 77 1970-01-01 00:05:53 power.c:570:get_power_voltage_from_iic_value: iic_index for voltage[145] = 17.313817 1970-01-01 00:05:55 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 65, high 77 1970-01-01 00:05:56 power.c:251:check_voltage_multi: retry time: 0 1970-01-01 00:05:56 power.c:213:get_average_voltage: chain[0], voltage is: 17.309853 1970-01-01 00:05:57 power.c:213:get_average_voltage: chain[1], voltage is: 17.358838 1970-01-01 00:05:58 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 65, high 77 1970-01-01 00:05:58 power.c:213:get_average_voltage: chain[2], voltage is: 17.260869 1970-01-01 00:05:58 power.c:224:get_average_voltage: aveage voltage is: 17.309853 1970-01-01 00:05:58 total rate = 39672 driver-btm-soc.c:2176:check_system_work: ideal hash is 38000 1970-01-01 00:05:58 driver-btm-soc.c:4227:bitmain_soc_init: Init done! 1970-01-01 00:05:58 util.c:2178:process_version_mask: Pool 0 Verion num is 4 1970-01-01 00:05:58 util.c:2178:process_version_mask: Pool 0 Verion num is 4 1970-01-01 00:05:59 driver-btm-soc.c:4416:send_job: Version num 4 1970-01-01 00:06:00 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 64, high 76 1970-01-01 00:06:03 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 63, high 75 1970-01-01 00:06:06 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 63, high 75 1970-01-01 00:06:08 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 63, high 75 1970-01-01 00:06:11 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 63, high 75 1970-01-01 00:06:14 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 63, high 75 1970-01-01 00:06:16 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 63, high 75 1970-01-01 00:06:19 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 63, high 74 1970-01-01 00:06:22 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 63, high 74 1970-01-01 00:06:24 temperature.c:1072:read_temp_func: PCB low 43, high 51. CHIP low 63, high 74 1970-01-01 00:06:27 temperature.c:1072:read_temp_func: PCB low 43, high 51. CHIP low 63, high 74 1970-01-01 00:06:28 pic.c:145:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254! 1970-01-01 00:06:30 temperature.c:1072:read_temp_func: PCB low 43, high 51. CHIP low 63, high 74 1970-01-01 00:06:30 pic.c:145:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254! 1970-01-01 00:06:31 pic.c:145:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254! 1970-01-01 00:06:32 temperature.c:1072:read_temp_func: PCB low 43, high 51. CHIP low 63, high 74 1970-01-01 00:06:33 pic.c:145:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254! 1970-01-01 00:06:35 pic.c:145:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254! 1970-01-01 00:06:35 temperature.c:1072:read_temp_func: PCB low 43, high 51. CHIP low 63, high 74 1970-01-01 00:06:36 pic.c:145:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254! 1970-01-01 00:06:38 temperature.c:1072:read_temp_func: PCB low 43, high 51. CHIP low 63, high 74 1970-01-01 00:06:38 pic.c:145:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254! 1970-01-01 00:06:40 pic.c:145:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254! 1970-01-01 00:06:40 temperature.c:1072:read_temp_func: PCB low 43, high 51. CHIP low 63, high 74 1970-01-01 00:06:41 pic.c:145:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254! 1970-01-01 00:06:43 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 63, high 74 1970-01-01 00:06:46 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 63, high 74 1970-01-01 00:06:48 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 63, high 74 1970-01-01 00:06:51 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 63, high 74 1970-01-01 00:06:54 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 63, high 74 1970-01-01 00:06:56 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 63, high 74 1970-01-01 00:06:59 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 63, high 74 1970-01-01 00:07:02 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 63, high 74 1970-01-01 00:07:04 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 63, high 74 1970-01-01 00:07:07 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 64, high 74 1970-01-01 00:07:10 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 64, high 74 1970-01-01 00:07:12 temperature.c:1072:read_temp_func: PCB low 44, high 51. CHIP low 64, high 74 1970-01-01 00:11:16 driver-btm-soc.c:2101:is_zero_nonce_happened: chain_nonce[0] = 15728 1970-01-01 00:11:16 driver-btm-soc.c:2101:is_zero_nonce_happened: chain_nonce[1] = 15533 1970-01-01 00:11:16 driver-btm-soc.c:2101:is_zero_nonce_happened: chain_nonce[2] = 14765 2020-03-21 15:48:03 temperature.c:1092:update_error_status: Fatal Error: network connection lost! 2020-03-21 15:48:03 temperature.c:1137:check_error_protect: fatal_error_counter increase as: 1, error status: 2 2020-03-21 15:48:05 temperature.c:1092:update_error_status: Fatal Error: network connection lost! 2020-03-21 15:48:05 temperature.c:1137:check_error_protect: fatal_error_counter increase as: 2, error status: 2 2020-03-21 15:48:08 temperature.c:1092:update_error_status: Fatal Error: network connection lost! 2020-03-21 15:48:08 temperature.c:1137:check_error_protect: fatal_error_counter increase as: 3, error status: 2 2020-03-21 15:48:11 temperature.c:1092:update_error_status: Fatal Error: network connection lost! 2020-03-21 15:48:11 temperature.c:1137:check_error_protect: fatal_error_counter increase as: 4, error status: 2 2020-03-21 15:48:13 temperature.c:1092:update_error_status: Fatal Error: network connection lost! 2020-03-21 15:48:13 temperature.c:1137:check_error_protect: fatal_error_counter increase as: 5, error status: 2 2020-03-21 15:48:22 log.c:101:_log_update_name: _log_update_name 2020-03-21 15:48:22 log.c:101:_log_update_name: _log_update_name 2020-03-21 15:48:47 pic.c:145:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254! 2020-03-21 15:48:48 pic.c:145:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254! 2020-03-21 15:48:50 pic.c:145:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254! 2020-03-21 15:48:52 pic.c:145:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254! 2020-03-21 15:48:53 pic.c:145:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254! 2020-03-21 15:48:55 pic.c:145:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254! 2020-03-21 15:48:57 pic.c:145:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254! 2020-03-21 15:48:58 pic.c:145:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254! 2020-03-21 15:49:01 pic.c:145:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254! 2020-03-21 15:53:36 driver-btm-soc.c:2101:is_zero_nonce_happened: chain_nonce[0] = 48288 2020-03-21 15:53:36 driver-btm-soc.c:2101:is_zero_nonce_happened: chain_nonce[1] = 48737 2020-03-21 15:53:36 driver-btm-soc.c:2101:is_zero_nonce_happened: chain_nonce[2] = 45601 2020-03-21 16:18:58 driver-btm-soc.c:2270:check_system_work: The avg rate is 39746.86 in 28 mins, PCB temperature between 49 ~ 57. 2020-03-21 16:49:26 driver-btm-soc.c:2270:check_system_work: The avg rate is 39937.29 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-21 17:19:53 driver-btm-soc.c:2270:check_system_work: The avg rate is 39459.11 in 30 mins, PCB temperature between 48 ~ 56. 2020-03-21 17:50:21 driver-btm-soc.c:2270:check_system_work: The avg rate is 39717.22 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-21 18:20:48 driver-btm-soc.c:2270:check_system_work: The avg rate is 39650.42 in 30 mins, PCB temperature between 48 ~ 56. 2020-03-21 18:51:16 driver-btm-soc.c:2270:check_system_work: The avg rate is 39912.63 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-21 19:21:43 driver-btm-soc.c:2270:check_system_work: The avg rate is 39727.37 in 30 mins, PCB temperature between 48 ~ 56. 2020-03-21 19:52:11 driver-btm-soc.c:2270:check_system_work: The avg rate is 39531.86 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-21 20:22:38 driver-btm-soc.c:2270:check_system_work: The avg rate is 39595.66 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-21 20:53:06 driver-btm-soc.c:2270:check_system_work: The avg rate is 39634.14 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-21 21:23:33 driver-btm-soc.c:2270:check_system_work: The avg rate is 39989.84 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-21 21:54:00 driver-btm-soc.c:2270:check_system_work: The avg rate is 40020.30 in 30 mins, PCB temperature between 47 ~ 56. 2020-03-21 22:24:28 driver-btm-soc.c:2270:check_system_work: The avg rate is 40079.51 in 30 mins, PCB temperature between 47 ~ 56. 2020-03-21 22:54:55 driver-btm-soc.c:2270:check_system_work: The avg rate is 40010.67 in 30 mins, PCB temperature between 47 ~ 56. 2020-03-21 23:25:23 driver-btm-soc.c:2270:check_system_work: The avg rate is 39717.22 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-21 23:55:50 driver-btm-soc.c:2270:check_system_work: The avg rate is 39756.94 in 30 mins, PCB temperature between 46 ~ 57. 2020-03-22 00:26:18 driver-btm-soc.c:2270:check_system_work: The avg rate is 39877.74 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-22 00:56:45 driver-btm-soc.c:2270:check_system_work: The avg rate is 39974.80 in 30 mins, PCB temperature between 46 ~ 57. 2020-03-22 01:27:13 driver-btm-soc.c:2270:check_system_work: The avg rate is 39808.57 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-22 01:57:40 driver-btm-soc.c:2270:check_system_work: The avg rate is 39587.23 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-22 02:28:07 driver-btm-soc.c:2270:check_system_work: The avg rate is 39974.20 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-22 02:58:35 driver-btm-soc.c:2270:check_system_work: The avg rate is 39777.90 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-22 03:29:02 driver-btm-soc.c:2270:check_system_work: The avg rate is 40053.64 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-22 03:59:30 driver-btm-soc.c:2270:check_system_work: The avg rate is 39810.38 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-22 04:29:57 driver-btm-soc.c:2270:check_system_work: The avg rate is 39853.23 in 30 mins, PCB temperature between 45 ~ 57. 2020-03-22 05:00:25 driver-btm-soc.c:2270:check_system_work: The avg rate is 39821.81 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-22 05:30:52 driver-btm-soc.c:2270:check_system_work: The avg rate is 39806.29 in 30 mins, PCB temperature between 44 ~ 56. 2020-03-22 06:01:20 driver-btm-soc.c:2270:check_system_work: The avg rate is 39927.07 in 30 mins, PCB temperature between 44 ~ 56. 2020-03-22 06:31:47 driver-btm-soc.c:2270:check_system_work: The avg rate is 39918.83 in 30 mins, PCB temperature between 44 ~ 56. 2020-03-22 07:02:14 driver-btm-soc.c:2270:check_system_work: The avg rate is 39806.29 in 30 mins, PCB temperature between 44 ~ 56. 2020-03-22 07:32:42 driver-btm-soc.c:2270:check_system_work: The avg rate is 39928.87 in 30 mins, PCB temperature between 44 ~ 56. 2020-03-22 08:03:09 driver-btm-soc.c:2270:check_system_work: The avg rate is 39505.99 in 30 mins, PCB temperature between 44 ~ 56. 2020-03-22 08:33:37 driver-btm-soc.c:2270:check_system_work: The avg rate is 39775.49 in 30 mins, PCB temperature between 44 ~ 56. 2020-03-22 09:04:04 driver-btm-soc.c:2270:check_system_work: The avg rate is 39754.53 in 30 mins, PCB temperature between 44 ~ 56. 2020-03-22 09:34:32 driver-btm-soc.c:2270:check_system_work: The avg rate is 39985.41 in 30 mins, PCB temperature between 44 ~ 56. 2020-03-22 10:04:59 driver-btm-soc.c:2270:check_system_work: The avg rate is 39659.45 in 30 mins, PCB temperature between 44 ~ 56. 2020-03-22 10:35:26 driver-btm-soc.c:2270:check_system_work: The avg rate is 39740.61 in 30 mins, PCB temperature between 44 ~ 56. 2020-03-22 11:05:54 driver-btm-soc.c:2270:check_system_work: The avg rate is 39737.08 in 30 mins, PCB temperature between 45 ~ 56. 2020-03-22 11:36:22 driver-btm-soc.c:2270:check_system_work: The avg rate is 39913.83 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-22 12:06:49 driver-btm-soc.c:2270:check_system_work: The avg rate is 39828.56 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-22 12:37:16 driver-btm-soc.c:2270:check_system_work: The avg rate is 39916.24 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-22 13:07:44 driver-btm-soc.c:2270:check_system_work: The avg rate is 39632.37 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-22 13:38:12 driver-btm-soc.c:2270:check_system_work: The avg rate is 39870.53 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-22 14:08:39 driver-btm-soc.c:2270:check_system_work: The avg rate is 39773.19 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-22 14:39:07 driver-btm-soc.c:2270:check_system_work: The avg rate is 39682.86 in 30 mins, PCB temperature between 49 ~ 57. 2020-03-22 15:09:34 driver-btm-soc.c:2270:check_system_work: The avg rate is 39939.89 in 30 mins, PCB temperature between 49 ~ 57. 2020-03-22 15:40:01 driver-btm-soc.c:2270:check_system_work: The avg rate is 39791.85 in 30 mins, PCB temperature between 49 ~ 57. 2020-03-22 16:10:29 driver-btm-soc.c:2270:check_system_work: The avg rate is 39726.17 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-22 16:40:57 driver-btm-soc.c:2270:check_system_work: The avg rate is 39797.75 in 30 mins, PCB temperature between 48 ~ 57. 2020-03-22 17:11:24 driver-btm-soc.c:2270:check_system_work: The avg rate is 39880.31 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-22 17:41:51 driver-btm-soc.c:2270:check_system_work: The avg rate is 39813.99 in 30 mins, PCB temperature between 47 ~ 56. 2020-03-22 18:12:19 driver-btm-soc.c:2270:check_system_work: The avg rate is 40015.12 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-22 18:42:47 driver-btm-soc.c:2270:check_system_work: The avg rate is 40008.87 in 30 mins, PCB temperature between 47 ~ 56. 2020-03-22 19:13:14 driver-btm-soc.c:2270:check_system_work: The avg rate is 39752.73 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-22 19:43:42 driver-btm-soc.c:2270:check_system_work: The avg rate is 39684.67 in 30 mins, PCB temperature between 47 ~ 56. 2020-03-22 20:14:09 driver-btm-soc.c:2270:check_system_work: The avg rate is 39631.76 in 30 mins, PCB temperature between 46 ~ 56. 2020-03-22 20:44:36 driver-btm-soc.c:2270:check_system_work: The avg rate is 39767.77 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-22 21:15:04 driver-btm-soc.c:2270:check_system_work: The avg rate is 40011.88 in 30 mins, PCB temperature between 47 ~ 57. 2020-03-22 21:45:31 driver-btm-soc.c:2270:check_system_work: The avg rate is 39807.37 in 30 mins, PCB temperature between 48 ~ 60. 2020-03-22 22:15:59 driver-btm-soc.c:2270:check_system_work: The avg rate is 39864.06 in 30 mins, PCB temperature between 49 ~ 57. 2020-03-22 22:46:26 driver-btm-soc.c:2270:check_system_work: The avg rate is 39778.61 in 30 mins, PCB temperature between 49 ~ 57. 2020-03-22 23:16:54 driver-btm-soc.c:2270:check_system_work: The avg rate is 39820.60 in 30 mins, PCB temperature between 49 ~ 57. 2020-03-22 23:47:21 driver-btm-soc.c:2270:check_system_work: The avg rate is 39873.09 in 30 mins, PCB temperature between 49 ~ 57.
|
|
|
open the gui look at tabs click kernel log ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2F6mz7yja.png&t=663&c=Xj3zPEo34Un4Kw) then copy the log paste it here ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FOHRyLMB.png&t=663&c=psDIjbYFigEuMA)
|
|
|
actually using the same algorithm for multiple coins is really bad. we have had more then one coin on an algorithm shared by multiple coins get attacked.
merged mining ⛏ say btc and nmc is not a big deal.
but mining bsv btc bch all separately will one day have an attack.
|
|
|
If I hit ck will do alright.
|
|
|
I have watched a video from an anonymous page, and I wasn't able to remember the exact name of the page. The Video explains that Because of the recent installation of 5G Towers in Wuhan China was the reason why The Virus was Discovered The Video Explains also, that 5g Towers with 60 ghz causes Respiratory Failure in other words NCOV or Covid-19.
Now, I would like to know if somebody here could Explain what Really Happens if, the News was Fake that the virus came from bat or was it because of the 5G networks.
and if ever could somebody explain what can 5G networks cause to our health, it would be a great Help.
Illuminate me.
P.S. The video I've watched recently was deleted by facebook, and Can't be search through any of Search Engine Applications.
God is tired of reading posts like this on bitcointalk. So he or she is going to keep tossing viruses at us until humans stop with the questions already. Corona-V or Covid-19 is just the beginning. Next one will be just as contagious but 2x as deadly. Unless of course people stop posting these questions on bitcointalk's serious subject sub-forum. God has personally told me this and I am asking Theymos to start a new subsection which would be How crazy can you be sub forum. All mods would be instructed to move any and all topics to this section that are simply to crazy for god's tastes in subject matter.
|
|
|
I just didn't see anything funny with this particular joke/game, so it came off as mocking, which doesn't feel right to me given the circumstances.
Look at the emphasis. You do not see is as such, but you need to know that other people may see it as such and also not think they are mocking because of different tastes in humour. A lot of people joke about the clown-state of the planet (much more than you think - and Covid is just a small example out of plenty). I think this is only fair! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) If you have a wife that was in the hospital with double pneumonia and you have four cousins with it. It is and was a shitty joke. My wife's cousin on the ventilator has a 20% chance of surviving. The other 3 cousins are getting back to normal. Every night my wife has a 20 to 30 minute coughing fit. When she first lies down to sleep. If lucky she wakes up in 2 or 3 hours has another 20-30 minute coughing fit. Then in the morning one more 20-30 minute coughing fit. This is due to inflammation caused by the pneumonia. My local hospital has 280 beds. In jan when my wife was treated for her pneumonia 215 of those beds were filled with lung and upper respiratory illness. This hospital now is filled to the top and more then 10 have died from the disease. My wife stays home I go out 2 times a week once for food once for fedex drop offs and gasoline. My wife is on steroids for her lungs which make her subject to new infections. So I try to keep her safe. Since we both got sick around Dec 26-28 which ended up with her in the hospital Jan 13-16 we simply don't know if we had the corona-v. So the FUD is a bitch. Since the disease seems to be really hard on Italians and Spaniards and no one knows if there are genetic weaknesses to the disease both my wife and I worry more. As she is all Italian descent. Both here parents came here in the late 1940's. I am a fan of humor and yeah it is funny until you get fucked hard by the subject. So corona-v humor does not play well for us.
Edit I do have a sense of humor even with my sick wife and my wife's cousins being ill. But it is more like this: I just read this in serious discussion section of the forum. I have watched a video from an anonymous page, and I wasn't able to remember the exact name of the page. The Video explains that Because of the recent installation of 5G Towers in Wuhan China was the reason why The Virus was Discovered The Video Explains also, that 5g Towers with 60 ghz causes Respiratory Failure in other words NCOV or Covid-19.
Now, I would like to know if somebody here could Explain what Really Happens if, the News was Fake that the virus came from bat or was it because of the 5G networks.
and if ever could somebody explain what can 5G networks cause to our health, it would be a great Help.
Illuminate me.
P.S. The video I've watched recently was deleted by facebook, and Can't be search through any of Search Engine Applications.
God is tired of reading posts like this on bitcointalk. So he or she is going to keep tossing viruses at us until humans stop with the questions already. Corona-V or Covid-19 is just the beginning. Next one will be just as contagious but 2x as deadly. Unless of course people stop posting these questions on bitcointalk's serious subject sub-forum. God has personally told me this and I am asking Theymos to start a new subsection which would be How crazy can you be sub forum. All mods would be instructed to move any and all topics to this section that are simply to crazy for god's tastes in subject matter.
|
|
|
Hello,
How can I delete my bitcointalk account?
This is my first and only action on bitcointalk so i think it's not a problem to delete my account.
Have a nice day and thanks for your answers
edit your posts to just a . you only have three of them.
|
|
|
Yeah 2016 a long time ago. Kept these photos as it was too hard to delete them I made wires a bit neater ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FMl4xsNL.jpg&t=663&c=O_KQEGMuOXUg0Q) this had an amazing after market cooler. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2F88nCXXo.jpg&t=663&c=2_XKuvoL9XVcPA)
|
|
|
silly thought... can the PSU be left open, and the fans took out? to avoid overheating I am thinking of placing some 3 or 4 140mm arctic (pc) fans, way silent (2000rpm) to blow on the PSU? My question: Would the PSU start if no fans are present? ie fail-safe to avoid overheating? If yes, can the PSU power the other fans and 'tricked' into believing they run at the 'safe/recommended' speed of its original fans? I would not go through all the trouble, but this high pitch sound is a bit annoying A good question. I don’t have one on hand. With shelter in place I wont be driving to the main location any time soon.
|
|
|
I suppose you will be demanding
meters and klicks vs yards and miles. 😄. no way
personally we should all be using kelvin scale for temp.
80 would be super fucking cold. as 0 is the start of the scale no negatives at all.
to op my answer to your poll is maybe.
please post logs I will read and attempt to help you.
do you use a switch to access router. is so what is the switch is it 100 mb or gig speed switch. an eight port or 16 or 32 or 48
|
|
|
That confirms it; theymos apparently thinks it's funny to joke about a disease outbreak that (by my guesstimate) will probably directly kill at least a million people
![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) If you choose to see-as-evil acts which were clearly done in the spirit of fun & good faith, then you're creating demons for your personal living hell... There is a rare worldwide shared cultural experience going on in the form of the pandemic and the resulting unprecedented social distancing policies. It's similar to a world war in terms of its widespread cultural significance. So this little game came to my mind to connect with it. As with several past bitcointalk.org April Fools things, it's more of a new/weird/fun way for people to interact with the forum and generate discussion, not a joke as such. Certainly it wasn't meant to somehow poke fun at the many real tragedies created by the coronavirus situation; it was meant to connect with the huge thing dominating the minds/lives of basically everyone on Earth. I felt what you were trying to do. But With my wife and my wifes 4 cousins already sick And with one of them on a ventilator it felt saddening to me. I do feel better having deleted the two threads 🧵 with 1000 plus posts on them. I won’t be doing any others as multiple people have asked me to keep the alt coin mining threads 🧵 and the other difficulty threads. I also realized that my actions of deleting my self modded threads 🧵 may be like a bunch of morons not cooperating with the lockdowns. so I will leave the other threads up. wishing all of you luck in your lives with corona-v.
|
|
|
Phil, did you just delete one of your early threads? I just got a BUNCH of "your post has been deleted by a self-moderated thread" emails this morning on some posts that looked mighty old.
yeah thread 1 is now gone.
|
|
|
Just cleaning this up due to corona-v
|
|
|
The funniest part would be ...
If we wake up tomorrow and all those posts and threads will be deleted as of a part of APRIL FOOL. lol, I would like to see the face of everyone here.
In order to disinfect this I will be deleting all threads that I started with the self mod option. I would think I can delete a few thousand posts of other people this way. along with a few thousand of mine. I will be starting here. https://bitcointalk.org/index.php?topic=5091665.msg48988960#msg48988960But you have some great content there. I do not think deleting those is necessary apart form that today we have a lot of useless posts just because of Theymo-Virus20 and I am pretty sure they will get deleted. Yeah it was old time to get rid of the old and in with the new. It was helpful to do it as I listen to my wife still coughing 90 days after being released from the hospital with double pneumonia which may have or may not have been caused by corona-v. While I don't like the joke I get it and it will help some. I picked a thread that was locked and a bit out of date. I did not want to punish people if they are earning with their signature's in a current thread. I personally feel better for having done it. I think I will move on to my 9 alt coin threads. They had over a million views and I truly love them. But I am in lock down here in New Jersey facing 30 more days of Fud. I believe deleting my favorite pride and joy threads may help me cope with what will happen over the next thirty days. These 9 threads date back to 2016 they should be out of date and old so time to clear out the old and make space for the new. I feel for you and I can totally understand your situation and the same happened to me in some way. We are in lockdown as well but you must try to enjoy/take advantage of things that can cheer you up - I really hope that this lockdown ends sooner and we all get back to normal lives. This joke just gave smile to everyone, being lockdown for days then suddenly woke up and they all saw the virus and laugh or at least smiled. Did you archive the threads before closed them? Well, those threads could have helped you a lot seeing people getting help and really appreciating you. I will pray for your wife. Good luck. No I am going the route of Zen and simply erasing them. Most likely I won't be able to do it. I am on thread 1 of the alt coin mining back in 2016 and it is sad to read and erase the posts. It is also sad to see inactive members posts that I used to blog back and forth with about gpu mining and builds. I am resolved to do the first thread. but I am pretty sure doing all nine will be too hard for me to do.
|
|
|
|