Well good at least it is not a mistake.  I wonder what these are going to be worth.

I have 43  if they are 10 bucks a point it would be 430  which would make a new s19 more attractive.

Coins are low  8700-8800  maybe they will do a good promo for this new gear.

I would not use them.

every one else says  April shipping they say 1 week.  I would deactivate the link.

Yeah it is like a reboot.  Are you using a rasp pi 3+ or rasp pi 3 to do this?

Yeah  could happen like you say so I am only getting one or two of these to start.

As for getting 100th for 3000

I got 15 s9s with psu’s for 3000. about 210th my power deal is 50-50 split.

so I mined the entire 2019 year with the equivalent of 105th and zero power cost.

I am always floating between old gear cheap price.
new gear for high price.

cheap priced gear due to  poor  power numbers is good for me
expensive priced gear due to  great power numbers is good for my host.

so i try to have some of each.

Yeah you needed to get a used s9i they can be under clocked and or use custom firmware.

Hmm I have 28 s9's  If I pull the fans and the shells maybe I build a cheap easy case for a doctored s17 first

then try a doctored s19 or s19 pro.

If you put these out right away they could be a nice item to sell.

If they are 3 board units you could sell 3

1 board units

pretend a full unit is 2400

I think a 1 board unit could go for 1100 assuming you tamed the sound levels

so 3 x 1100 = 3300 -2400 = 900 but added parts are at least 450.  the killer is the psu will be over 150 shipped.

the psu is basically bespoke oem part along with the controller  the two will be close to 225 shipped to usa.

we have

1 s15
1 s17
15 s17 pro

they are all nice choice of speeds when and if needed.

the controllers will be 60 to 100

the psu around 150

the trick is getting a case.  this idea is worth some merits.

I used  this material and mdf

video below

https://www.youtube.com/watch?v=6soWakwmK5M
https://www.youtube.com/watch?v=THQHtFPkzuk
https://www.youtube.com/watch?v=8X15H0qLNyI
https://www.youtube.com/watch?v=DySrCBras3w
https://www.youtube.com/watch?v=QbH79FdVxpE
https://www.youtube.com/watch?v=M-9sGDZAWEM
https://www.youtube.com/watch?v=_Mqxy28jPvw
https://www.youtube.com/watch?v=hlB5LikKeiw

I am wired that I can add a lot of these but they scare me.  I would prefer they did 2800 watts or less.

I will get them to replace  the 28 s9's I have.

The nice thing is  28 x 1100 = 31 kwatts and maybe 336 th
9 of these =  30 kwatts  and 990th

No No No No No

build a box or run on low speed.

These fans must whale away to keep gear cool.

Noctua will simply over heat the unit.

Well it will make business for aftermarket firmware  you simply need to be able to dial gear back some times.

I so like the s17 pro  with 3 speed settings  and huge watt difference 1400/1500 on low vs 2700/2800 on high.

My Clifton farm is in an industrial area and I would consider it to be an industrial farm.  I would rather have all s17 pros over this unit if this is a one speed unit.

we use outside air.  so in the summer the air coming in is as high as 100f most often it is 90f intake in the summer.

These 1 speed units may all fail in the summer.

3000 is really high unless it ships really fast.
the over view shows one speed. really sucks to have one speed.

at todays prices it earns 15 usd and burns 80 kwatts.

at 1/2 ing it earns 7.50 and burns 80 kwatts.  five cent power it costs 4 a day.

so it earns 11 a day right now
it earns 3.50 a day at 1/2 ing

it is a risk to get a lot.

i will get one of each and look for more. down the road.

Give him one.

I just gave him two.

So a 1 speed 3300 watt miner.
I would have liked more then one speed setting.
These will be a hard sell item with coins under 9000  and the 1/2 ing right around the corner.

one speed for the unit is just plain stupid.

S17 pro 3 speed choices

S19 pro 1 speed choice  going backwards not forwards.

My s17 pro on low speed  does 36 watts a th

after market firmware you can get 34 maybe 33 watts a th on an s17 pro.

So s19 pro is going to need after market firmware to be worth buying.

I will be getting one of each ASAP

110 + 95 = 205 th at 6500 to 6600 watts

I will retire all 28  s9's  they do 308th at  27,000 to 28,000 watts.

Almost all new units are in the 3100 to 3400 watt range.
the whatsminers all do about 3200 to 3400
the antminers all do about 3200 to 3400

I prefer 2700 for top watts.

trump tax will cost me $$$

I will be getting 1 of each asap.  I wish they were 2 speed

110 x .1387 =  15.257 a day using 78-80 kwatts  pre ½ ing  is :

1 cent     15.25 - 0.80 = 14.25   if price stays still    7.63 - 0.80 = 6.83 after ½ ing
2 cent     15.25 - 1.60 = 13.65   "                           7.63 - 1.60 = 6.03       "
3 cent     15.25 - 2.40 = 12.85  "                             7.63 -2.40 = 5.23       "
4 cent     15.25 - 3.20 = 12.05   "                            7.63 - 3.20 = 4.43      "
5 cent     15.25 - 4.00 = 11.25   "                            7.63 - 4.00 = 3.63     "
6 cent     15.25 - 4.80 = 10.45   "                            7.63 - 4.80 =  2.83    "
7 cent     15,25 - 5.40 =  9.65    "                            7.63 - 5.60 =  2.03   "

tight numbers  for this gear   if it is priced at 2400 and is shipped on april 1  long pay back times.

links please

found it!


too bad it is a one speed unit.

this is good advice.

at op look for nvidia 1660 on sales.

good luck.