2 Claymore. After i start to use 11.2 version, i got amdocl64.dll crashes. Any clues?
I posted this question early, but no answers for serious question as usual. But i solved this issue. If anyone have same error you need to do: 1. Increase amount of ram at you rig (if you have 2gb make it at least 4gb) 2. Increase swap file 32-64 gb (or more if you have large rig). 3. GPU_FORCE_64BIT_PTR 0 set to 1 4. Copy atiadlxx.dll to folder where claymore miner For me it was 3 and 4. All my rigs have at least 8gb of ram and huge swap. What does setting 1 do? I have 0. I got 65gb swap and 4gb ram. 13 amd radeon 570 8gb.
|
|
|
Windows keeps restarting. Had to readjust oc settings after update to 11.2
|
|
|
You is the creator the NixonCoin?
Me? Never heard of
|
|
|
I am using a 16GB kingston USB3.0 stick with Hive OS on it and it works great. The 3 molexes on the MB are not connected, I have powered risers (2 per cable coming from the PSU).
Risers are something fishy, sometimes have to switch either cables or power them from another PSU until everything runs fine. If they have an issue with power the MB shows multiple slots in red, its just figuring out which one to change PSU then and everything is green again.
Which version riser are you using? I use strictly 006c ver and oddly have never even gotten a bad one, yet. I strictly use 120gb ssd, they are $48. I run win 10 Pro, updated to 1709 and Asus bios ver 1001. The 3 molexes are NOT connected on my m/b. I have two sticks of 4gb memory pc2133. I use 006C risers. 8pin from psu to 8pin/6+2pin (8pin to gpu and 6pin to riser). Using 4gb ram pc2400
|
|
|
Sooo..Installed 11.2 on my Win10 64bit rig and disabled defender anti virus - worked ok for a little bit then after a few minutes of running my two 570's cards reduce in hash - 24 down to 10..to 7..and eventually 0, the two 550 remained aroun 9-11...
Im running two RX570 and two RX550 (all 4gb).
So.. Stopped the rig completely.
Put back decided to go back to the 10.6 that I found stable...
It wont go past:
AMD Cards available: 4 GPU #0: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 1:0:0) GPU #0 recognized as Radeon RX 470/570 GPU #1: Baffin (Radeon RX 550 Series), 4096 MB available, 10 compute units (pci bus 6:0:0) GPU #1 recognized as Radeon RX 460/560 GPU #2: Baffin (Radeon RX 550 Series), 4096 MB available, 10 compute units (pci bus 7:0:0) GPU #2 recognized as Radeon RX 460/560 GPU #3: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0) GPU #3 recognized as Radeon RX 470/570 POOL/SOLO version
None of the cards are clocked everything is standard from the box.
Anyone any ideas ?
I tried to download 11 - 11.1 and 11.2 again from Google - but Google wont allow it (?) says virus found used Mega instead.
Checked the logfile? This happened to me once I was oc and undervolt to much.
|
|
|
Are there an way to have programs (.bat) in startup folder to have delayed start?
F.ex Program1 : 10 seconds after login Program2: 20 seconds after login
|
|
|
My experience
Sapphire Radeon 570 Nitro+ 8GB Micron These cards are awesome. With polaris bios editor one time click patch + OC and undervolt I get 30.9 hashrate on eth. 1150/850 2150/850 powerlimit 70%. 13gpu + mb etc. draw 1525W from the wall. 0 errors
Sapphire Radeon 570 Nitro+ 8GB Hynix Good enough. One time click patch + oc and undervolt. I get about 28.x and 29.x hashrate on eth. I dont remember oc and undervolt settings, but I think it was 1200/900 2100/850. 0 errors
Sapphire Radeon 570 Nitro+ 8GB Samsung Micron I hate these cards. Used one time click patch (ubermix 3.1 for samsung and GOOD for micron). I get about 27.5-28.9 hashrate on eth. 1175/975 1975/850, powerlimit 70%. Some cards show 0 errors, some 625 error and one card 23000 errors after 3 hours mining. They are so sensitive! They use a little bit more power than micron and at the same time they have less hashrate.
Sapphire Radeon 570 Nitro+ 8GB Micron Samsung I havent tested this card yet. What is the difference between Micron Samsung and Samsung Micron?
Request: Anyone have the original bios of radeon 570 Micron Samsung? (Not Samsung Micron) I think I f**** up this bios. Forgot to take backup.
Whenever I test new settings that is working I will update this post. Please keep this thread nice without ten thousands of posts (update your post when new settings are successful), donīt quote if necessary.
|
|
|
That is so strange. Maybe you need to logon to nicehash account (nicehash.com) from the same IP that your rigs are using.
|
|
|
Omg9500 and Dragonizer: I mine directly to nicehash wallet using claymore 11.2, see his thread https://bitcointalk.org/index.php?topic=1433925.0 for download link. Starting miner using start.bat: setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe Config.txt -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal WALLET.Riggname -epsw x -esm 3 -allpools 1 -estale 0 ++ settings for undervolt.
|
|
|
Cheapest kingston 120gb ssd i could find.
|
|
|
I dont use molex
13 amd radeon 570 2x evga g2 1600w (gpu + risers powered directly from vga slots on psu) Pentium g4560 4gb ram Win 10
Currently hashing 30.2 mh/s on each gpu. Power draw from the wall: 1520W 220V
OC directly in claymore Clocks/volt 1150/0850 2150/0850
2 more rigs coming up this weekend. It is very stable. Mining for a week without issues.
What you use to run things windows or linux Windows
|
|
|
How to use -powlim ? -powlim -30 (the gpu is limited to 70% power usage?)
Right "-powlim -30" means 70% of default max power usage. Why would one use that? Lower powet usage. Very low impact on hashrate. I have 39 gpu in my apartment. I cant use the washing machine before 30A fuse breaks:)
|
|
|
How to use -powlim ? -powlim -30 (the gpu is limited to 70% power usage?)
|
|
|
How to use -powlim ? -powlim -30 (the gpu is limited to 70% power usage?)
|
|
|
Try claymores nicehash example, page 1 in his thread. Edit your config Also use setx GPU_allocate blabla in start.bat (as mentioned in thread).
|
|
|
Download claymore, mine directly to your nicehash wallet
|
|
|
Ubermix 3.1 for samsung sucks. Only getting 27.2 mh/s. 1200/1v 1900/0.850v
With micron I get 30.9 (1150/0.850 2150/0.850)
|
|
|
OC not working first time miner is running? Using start.bat
I have OC set in my config -cclock 1150 -cvddc 0850 -mclock 2000 -mvddc 850 -tt 57
The first time miner starts all gpus hashing 24.9 mh/s in eth.
If I close the miner window and open start.bat (which contains gpu force etc as mentioned on first page) the miner starts and gpus is hashing 30.x mh/s
Amd 18.2.3 drivers, compute mode enabled. (Trixx, wattman and amd settings etc is not installed).
-cvddc 850 not -cvddc 0850 Yeah right. 1050 means 1.05V. 0850 means 0.850V.
|
|
|
OC not working first time miner is running? Using start.bat
I have OC set in my config -cclock 1150 -cvddc 0850 -mclock 2000 -mvddc 850 -tt 57
The first time miner starts all gpus hashing 24.9 mh/s in eth.
If I close the miner window and open start.bat (which contains gpu force etc as mentioned on first page) the miner starts and gpus is hashing 30.x mh/s
Amd 18.2.3 drivers, compute mode enabled. (Trixx, wattman and amd settings etc is not installed).
|
|
|
|