maybe we have to open a speculation thread in the speculation selection
thats why your a junior member and im a hero. ..ive been here for a long....long time to know how it happens.... if there wasnt going to happen by now there was no market and people dumping jr. member its not relevant, what is when it is my 2nd account? im here since the first day of krb... lool im not bothering to give you an answer...im here since gpu start mining ltc...im here since the first block erupter appear...i still remenber to pay 50eur for that crap....got 17 stored for nothing now....lol stop the bullshit think and support the coin instead of bring it down.... theres wasnt yet a cryptonote coin that reach so far like this....that reach and bypass some days monero profitabily.... i still remember qzar coin when it was born ...beat the hell out of monero but people left it back.... just support and dont talk bulshit....you started with speculation threat lol lol and i dont need any second or third account....im here with the same since the start
|
|
|
hi all, everybody knows yobit exchange, everybody used it sometime... for long time that yobit only looks for it self by puting coins under maitenance for ages just to raise price... everybody knows that with some coins you cant even wridraw...but im facing a problem and.. has always Yobit doesnt care...doesnt reply to any message on support....just nothing...
a couple of months ago i step into swing coin because of its high POS...i already had an yobit address to trade there my swings... so i did it like always send 92 swing coins to my yobit address...i waited and waited and nothing... check my address and what was my suprise another coin on maitenence...
ITS BEEN 2MONTHS GOING FOR THE 3RD and coin still on maintence...
Yobit like always dont reply....doesnt care....dont even a simple answer "we are going to fix it" just NOTHING AT ALL
I HOPE YOU GUYS have plenty of dinners with my 92 swing coins cause by now with HI POS you may have already 150 coins and with the price of them you can have some good week.... THANKS YOBIT!!!!.....if i was needing the money i already was in a pile of shit by now.... THANKS YOBIT FOR YOUR SCAMS i can post tx to confirm this scam if anyone asks....ive keep it....
|
|
|
its sending payments of 0.1krb already played with min amount and max amount but its giving "wrong amount" error what values should i set??!! solved also ...only had to wait so that transation goes pools checks again addreess and send it again
|
|
|
now im getting this error "mixin account is too big"
seen the post here with the same issue and ive change payments to work "payments": { "enabled": true, "interval": 60, "maxAddresses": 50, "mixin": 0, "transferFee": 10000000, "minPayment": 1000000000, "maxTransactionAmount": 1000000000, "denomination": 1000000000
but still that one isnt making automatcly im going to send it manualy... what im missing.... this way payments will work without errors!???
solved...denomination,minpayment,maxtransation was missing more 2 "0" payment done auto with no problem..
|
|
|
maybe we have to open a speculation thread in the speculation selection
thats why your a junior member and im a hero. ..ive been here for a long....long time to know how it happens.... if there wasnt going to happen by now there was no market and people dumping
|
|
|
now im getting this error "mixin account is too big"
seen the post here with the same issue and ive change payments to work "payments": { "enabled": true, "interval": 60, "maxAddresses": 50, "mixin": 0, "transferFee": 10000000, "minPayment": 1000000000, "maxTransactionAmount": 1000000000, "denomination": 1000000000
but still that one isnt making automatcly im going to send it manualy... what im missing.... this way payments will work without errors!???
|
|
|
need help with forknote pool cant find a solution anywere... payments of my pool arent being send got this error [api] API started & listening on port 9844 2017-04-16 19:36:36 [payments] Error with transfer RPC request to wallet daemon {"code":"ECONNRESET","errno":"ECONNRESET","syscall":"read"} 2017-04-16 19:36:36 [api] Stat collection finished: 122 ms redis, 108 ms daemon 2017-04-16 19:36:36 [api] Broadcasting to 0 visitors and 0 address lookups search everywere....dont know what to do please help... coin karbowanec already solved this issue if anyone has it check karbowanec ANN... forknote works great...one of the best things of cryptonote...but... i have to ask... We need a forknote pool that can support merged mining on stratum... theres none out there to merged with fcn.... only minergate....always and only minergate....thats a monopoly in cryptonote... if you want to merged mine you have to use minergate pool ;(with theres lack of support or even dont care for miners... please forknote work on that...gives a node merged mining pool so we can change this
|
|
|
Hey guys! For support trading pair KRB/BTC at Livecoin.net I will offer you a better price! How want to sold some KRB? On Cryptopia now last last buy order is 0.00002886 BTC (for 3.92476025 KRB) On Livecoin.net last buy order (is mine) -- 0.00002912 BTC (for 2 428.33632186 KRB) Let's go! price still too low for a coin that reduces reward at every block.... im not selling any until some months past or i see a good good price.... with low block rewards====high prices
|
|
|
run ./simplewallet with flag --wallet-rpc-bind-port 7887 and other flags as I wrote, if you will not include this flag simplewallet won't run in rpc mode
Run daemont on port 32348 where "path/to/forknote_folder/" is path for your folder. path/to/forknote_folder/./forknoted --config-file path/to/forknote_folder/karbovanec.conf --rpc-bind-port=32348 Run rpc wallet on port 8070 with name "walletname" and password "wallet_password" cd path/to/forknote_folder/ && ./simplewallet --config-file path/to/forknote_folder/karbowanec.conf --wallet-file=walletname --password=wallet_password --daemon-port=32348 --wallet-rpc-bind-port=8070 In config.json file in folder pool add wallet port 8070 and daemon port 32348. FINALY my pools fine without any....any error thanks to you...noone could explain it better... heres proof: I want to offer you 10KRB for your help....please post addressits not mutch but im mining only with cpu...it isnt profitable for gpu...zclassic still beats... and i dont have 200krb yet so i dont have much.. I thank you also dev but got to say that he really...really solve my issue i couldnt figured out that i had to assing 2 rpc ports the default and other for wallet....noone explain better....all walkthroughts online never says that part... even being a linux geek i didnt figured out myself... POOLS online with vardiff....its using noip on a 100mb fiber connection...its 0% fee for now i only will change it when i get 30k or 40k cause that will affect the load on my other pool on my server. so if you wanna mine without any fee like solomining go ahead and join...ill apreciate the fast blocks find... please dev had my pool to the OP it will be 24/7 from now on...i wont change my noip to krb cause im using also to another pool... pools address http://bityce.ddns.net:8080thanks everyone and this great coin with potencial... my pools just reports double the network hash and i didnt figured out why but block height,dif, is all ok....even profit calc is ok
|
|
|
run ./simplewallet with flag --wallet-rpc-bind-port 7887 and other flags as I wrote, if you will not include this flag simplewallet won't run in rpc mode
Run daemont on port 32348 where "path/to/forknote_folder/" is path for your folder. path/to/forknote_folder/./forknoted --config-file path/to/forknote_folder/karbovanec.conf --rpc-bind-port=32348 Run rpc wallet on port 8070 with name "walletname" and password "wallet_password" cd path/to/forknote_folder/ && ./simplewallet --config-file path/to/forknote_folder/karbowanec.conf --wallet-file=walletname --password=wallet_password --daemon-port=32348 --wallet-rpc-bind-port=8070 In config.json file in folder pool add wallet port 8070 and daemon port 32348. jizzzz finaly i get it why it was giving error on already assign port, your using 2 ports for rpc the default and the 8070 newly assign... many...many thanks for this walkthrough ill test it later cause now im testing the newly goland pool for solomining.... if it works ill give a post with print screen... once again thanks....could find a solution anywere...was giving me a headache lolol.... was about to give up nevermind goland pool only works with monero even changing ports to the ones of monero gives error... " slice bond out of range" im going to rebuild my pool now with those configs
|
|
|
run ./simplewallet with flag --wallet-rpc-bind-port 7887 and other flags as I wrote, if you will not include this flag simplewallet won't run in rpc mode
Run daemont on port 32348 where "path/to/forknote_folder/" is path for your folder. path/to/forknote_folder/./forknoted --config-file path/to/forknote_folder/karbovanec.conf --rpc-bind-port=32348 Run rpc wallet on port 8070 with name "walletname" and password "wallet_password" cd path/to/forknote_folder/ && ./simplewallet --config-file path/to/forknote_folder/karbowanec.conf --wallet-file=walletname --password=wallet_password --daemon-port=32348 --wallet-rpc-bind-port=8070 In config.json file in folder pool add wallet port 8070 and daemon port 32348. jizzzz finaly i get it why it was giving error on already assign port, your using 2 ports for rpc the default and the 8070 newly assign... many...many thanks for this walkthrough ill test it later cause now im testing the newly goland pool for solomining.... if it works ill give a post with print screen... once again thanks....could find a solution anywere...was giving me a headache lolol.... was about to give up
|
|
|
can someone help me with this its the only thing i couldnt find a way to fix it, already return to ubuntu 14.04 thinking it was the newst redis but still the same error.. i cant put my pool for everybody because of that... already check wallet port, already checked firewall,router foward...but if it doesnt connect it doesnt give any error...just says failed with the right wallet port gives me that error... cant find anywere how to fix it $ grep rpcMethod config.json grep shows "rpcMethod": "getblockcount" "rpcMethod": "getbalance" starting simplewallet without bind works because the karbowanec.conf already has p2p-bind-port=7887 rpc-bind-port=7888 my pool config has: "daemon": { "host": "127.0.0.1", "port": 7888 }, "wallet": { "host": "127.0.0.1", "port": 7887 and changing one for the other pool just gives getblocktemplace error even with simplewallet open it gives the same error in admin {"code":"ECONNRESET","errno":"ECONNRESET","syscall":"read"}
|
|
|
can someone help me with this its the only thing i couldnt find a way to fix it, already return to ubuntu 14.04 thinking it was the newst redis but still the same error.. i cant put my pool for everybody because of that... already check wallet port, already checked firewall,router foward...but if it doesnt connect it doesnt give any error...just says failed with the right wallet port gives me that error... cant find anywere how to fix it what type of wallet are you trying to run? use simplewallet, but bear in mind you have to generate wallet in it, wallet container from walletd can't be opened in simplewallet. thats why it isnt working didnt read anywere that of the container file...been reading now...ive been using a simplewallet address without even configured container...any link that can help me configured that part!!?? ive now generated a container with walletd but how do i use it on the pool with the address of simplewallet!!??
|
|
|
can someone help me with this its the only thing i couldnt find a way to fix it, already return to ubuntu 14.04 thinking it was the newst redis but still the same error.. i cant put my pool for everybody because of that... already check wallet port, already checked firewall,router foward...but if it doesnt connect it doesnt give any error...just says failed with the right wallet port gives me that error... cant find anywere how to fix it
|
|
|
height 99001 blocks in my client atm... how to be sure I'm on right fork? 1.1.4 binary
Yes, this is the right height (now already 99002), but better use daemon and simplewallet from forknote with karbowanec config. none of this solution work , block found but payment not working , and has many warning in daemon. xcrypto.org pool is going down until new daemon is ready. we dont want to waste you hashing power. thanks.... yesterday dev with help solved all this problems of fork....its not his fault that someone mess up transation creating a fork chain...all you have to do is READ THE LAST PAGES OF POST....connect to some especific nodes if your daemon is connecting to the fork chain and RESYNC!!!.... instead of bothering the dev....just fuck****g READ
|
|
|
we did it 2017-Apr-16 20:42:39.150874 INFO REORGANIZE SUCCESS! on height: 98466, new blockchain size: 98842 2017-Apr-16 20:42:40.291935 INFO [136.243.158.27:32347 OUT] SYNCHRONIZED OK nice keep this great coin rolling
|
|
|
well i figure out that i have to mine it solo for now on my pool... got an error that i cant figure out a solution anywere... search and search....cant fix it... already asked on forknote ann for help.. my pool is showing [api] API started & listening on port 9844 2017-04-16 19:36:36 [payments] Error with transfer RPC request to wallet daemon {"code":"ECONNRESET","errno":"ECONNRESET","syscall":"read"}2017-04-16 19:36:36 [api] Stat collection finished: 122 ms redis, 108 ms daemon 2017-04-16 19:36:36 [api] Broadcasting to 0 visitors and 0 address lookups i dont klnow whats wrong.... if someone can help i will help you later but this maybe is better to do when everything calms dows thanks...ill wait...when you can... ill stay mining solo just mine on one of pools that are on correct chain, or you mean your server? keep an eye it's on correct chain too thanks but im liking my luck on my server solomining... yesterday found 2 blocks even starting and shuting down do to being configured, and today i found already 1.... ill keep solo on my pool until i can figured out whats going wrong with [payments] not being send... i think its redis-server but i cant be sure...cant find anymore error beside that...with ubuntu 14.04 that i setup first payments didnt had problems...now....i really can figured out
|
|
|
well i figure out that i have to mine it solo for now on my pool... got an error that i cant figure out a solution anywere... search and search....cant fix it... already asked on forknote ann for help.. my pool is showing [api] API started & listening on port 9844 2017-04-16 19:36:36 [payments] Error with transfer RPC request to wallet daemon {"code":"ECONNRESET","errno":"ECONNRESET","syscall":"read"}2017-04-16 19:36:36 [api] Stat collection finished: 122 ms redis, 108 ms daemon 2017-04-16 19:36:36 [api] Broadcasting to 0 visitors and 0 address lookups i dont klnow whats wrong.... if someone can help i will help you later but this maybe is better to do when everything calms dows thanks...ill wait...when you can... ill stay mining solo
|
|
|
well i figure out that i have to mine it solo for now on my pool... got an error that i cant figure out a solution anywere... search and search....cant fix it... already asked on forknote ann for help.. my pool is showing [api] API started & listening on port 9844 2017-04-16 19:36:36 [payments] Error with transfer RPC request to wallet daemon {"code":"ECONNRESET","errno":"ECONNRESET","syscall":"read"}2017-04-16 19:36:36 [api] Stat collection finished: 122 ms redis, 108 ms daemon 2017-04-16 19:36:36 [api] Broadcasting to 0 visitors and 0 address lookups i dont klnow whats wrong.... if someone can help
|
|
|
|