Not true, ideally 12570 satoshi/10GH/day. And today was 7139 satoshi. You forgot to substract electricity cost, maintenance fees, etc... Right. In that case it is quite strange there is nothing written about any fees on website. In very begin I realy got amount equal to ideal mined amount. |
|
|
|
Could a customer offers samples of the payouts please?
I have got payouts at 10.11., then 17.11., 24.11. and 1.12. with screenshot please ?  Would You post here a screenshot of Your wallet? |
|
|
|
Could a customer offers samples of the payouts please?
I have got payouts at 10.11., then 17.11., 24.11. and 1.12. |
|
|
|
Something went wrong today when I ordered 100 GHs. Copied and pasted correctly, but:
Status: 0/ubekreftet
Dato: 01.12.2014 15:32
Til: Cloud Mining 1BRZNXoRDsSaVAwoZt1CFQ7ZhCkXRsA42d
Debet: -0.10 BTC
Nettobeløp: -0.10 BTC
Transaksjons-ID: 83d104701736007fee2c319a26ff7a5c3d9dfe9d71b86c154c5b96dca38c4832-000
So what am I going to do with my lost 0.1 BTC?
Something simmilar happened to me few months ago. One transactions which were there before one day lost from listing (it was newly generated coins from eligius) and final balance was something like -0.29464. I left blockchain.info wallet and moved funds to coinbase. After some time I watched on blockchain.info wallet and there were again final balance 0. Ok. I did not lose any coins but this strange behaving made me to change wallet service. That is all folks. |
|
|
|
Still having an issue with my CGMiner on my raspberry... running all good on windows
[2014-11-29 23:25:08] Stratum from pool 0 requested work restart
[2014-11-29 23:25:09] AMU2: invalid nonce - HW error
[2014-11-29 23:25:09] AMU1: invalid nonce - HW error
[2014-11-29 23:25:09] AMU2: work 00 not find error
[2014-11-29 23:25:10] AMU 0 SendWork usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-11-29 23:25:10] AMU 1 SendWork usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-11-29 23:25:10] AMU 2 SendWork usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-11-29 23:25:14] AMU 1 attempted reset got err:(-5) LIBUSB_ERROR_NOT_FOUND
[2014-11-29 23:25:14] AMU1: Comms error (werr=-5 amt=0)
[2014-11-29 23:25:14] AMU 1 failure, disabling!
[2014-11-29 23:25:15] AMU 2 attempted reset got err:(-5) LIBUSB_ERROR_NOT_FOUND
[2014-11-29 23:25:15] AMU2: Comms error (werr=-5 amt=0)
[2014-11-29 23:25:15] AMU 2 failure, disabling!
[2014-11-29 23:25:16] AMU 0 attempted reset got err:(-5) LIBUSB_ERROR_NOT_FOUND
[2014-11-29 23:25:16] AMU0: Comms error (werr=-5 amt=32)
[2014-11-29 23:25:16] AMU 0 failure, disabling!
[2014-11-29 23:25:19] Bitmain detect (1:103) failed to initialise (incorrect device?)
^C [2014-11-29 23:25:22] Shutdown signal received.
Running this =|>sudo ./cgminer -o stratum+tcp://xxx -u xxx -p xxx --bmsc-options 115200:55 --bmsc-freq 0781 --queue 0 --scan-time 1 --expiry 1 --lowmem
I'm guessing --bmsc-freq 0781 would be 200 mhz. (When i do not include that parameter, i got nothing either)
My parameters under windows => cgminer.exe --bmsc-options 115200:55 --hotplug --lowmem -o stratum+tcp://xxx -u xxx -p xxx
Any idea what is the default freq under windows ? Guessing it's my problem atm.
Thanks
try only --bmsc-options 115200 or --bmsc-options 115200 --bmsc-freq 0781, run with sudo Still doesn't work with my hub, I try without my USB hub tomorow. if cgminer -n shows any device You would only fine tune something... if it works with win it will work with linux raspberry pi's are known to be picky about usb hubs unfortunately I do not have any yet to try |
|
|
|
|
Today tested again AntMinerS4-cgminer.zip, unpacked, upload to the unit but not working:
root@antMiner:/usr/bin# ./cgminer-nicehash --help
./cgminer-nicehash: line 1: syntax error: unexpected "("
|
|
|
|
Still having an issue with my CGMiner on my raspberry... running all good on windows
[2014-11-29 23:25:08] Stratum from pool 0 requested work restart
[2014-11-29 23:25:09] AMU2: invalid nonce - HW error
[2014-11-29 23:25:09] AMU1: invalid nonce - HW error
[2014-11-29 23:25:09] AMU2: work 00 not find error
[2014-11-29 23:25:10] AMU 0 SendWork usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-11-29 23:25:10] AMU 1 SendWork usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-11-29 23:25:10] AMU 2 SendWork usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-11-29 23:25:14] AMU 1 attempted reset got err:(-5) LIBUSB_ERROR_NOT_FOUND
[2014-11-29 23:25:14] AMU1: Comms error (werr=-5 amt=0)
[2014-11-29 23:25:14] AMU 1 failure, disabling!
[2014-11-29 23:25:15] AMU 2 attempted reset got err:(-5) LIBUSB_ERROR_NOT_FOUND
[2014-11-29 23:25:15] AMU2: Comms error (werr=-5 amt=0)
[2014-11-29 23:25:15] AMU 2 failure, disabling!
[2014-11-29 23:25:16] AMU 0 attempted reset got err:(-5) LIBUSB_ERROR_NOT_FOUND
[2014-11-29 23:25:16] AMU0: Comms error (werr=-5 amt=32)
[2014-11-29 23:25:16] AMU 0 failure, disabling!
[2014-11-29 23:25:19] Bitmain detect (1:103) failed to initialise (incorrect device?)
^C [2014-11-29 23:25:22] Shutdown signal received.
Running this =|>sudo ./cgminer -o stratum+tcp://xxx -u xxx -p xxx --bmsc-options 115200:55 --bmsc-freq 0781 --queue 0 --scan-time 1 --expiry 1 --lowmem
I'm guessing --bmsc-freq 0781 would be 200 mhz. (When i do not include that parameter, i got nothing either)
My parameters under windows => cgminer.exe --bmsc-options 115200:55 --hotplug --lowmem -o stratum+tcp://xxx -u xxx -p xxx
Any idea what is the default freq under windows ? Guessing it's my problem atm.
Thanks
try only --bmsc-options 115200 or --bmsc-options 115200 --bmsc-freq 0781, run with sudo Still doesn't work with my hub, I try without my USB hub tomorow. if cgminer -n shows any device You would only fine tune something... if it works with win it will work with linux |
|
|
|
Still having an issue with my CGMiner on my raspberry... running all good on windows
[2014-11-29 23:25:08] Stratum from pool 0 requested work restart
[2014-11-29 23:25:09] AMU2: invalid nonce - HW error
[2014-11-29 23:25:09] AMU1: invalid nonce - HW error
[2014-11-29 23:25:09] AMU2: work 00 not find error
[2014-11-29 23:25:10] AMU 0 SendWork usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-11-29 23:25:10] AMU 1 SendWork usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-11-29 23:25:10] AMU 2 SendWork usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-11-29 23:25:14] AMU 1 attempted reset got err:(-5) LIBUSB_ERROR_NOT_FOUND
[2014-11-29 23:25:14] AMU1: Comms error (werr=-5 amt=0)
[2014-11-29 23:25:14] AMU 1 failure, disabling!
[2014-11-29 23:25:15] AMU 2 attempted reset got err:(-5) LIBUSB_ERROR_NOT_FOUND
[2014-11-29 23:25:15] AMU2: Comms error (werr=-5 amt=0)
[2014-11-29 23:25:15] AMU 2 failure, disabling!
[2014-11-29 23:25:16] AMU 0 attempted reset got err:(-5) LIBUSB_ERROR_NOT_FOUND
[2014-11-29 23:25:16] AMU0: Comms error (werr=-5 amt=32)
[2014-11-29 23:25:16] AMU 0 failure, disabling!
[2014-11-29 23:25:19] Bitmain detect (1:103) failed to initialise (incorrect device?)
^C [2014-11-29 23:25:22] Shutdown signal received.
Running this =|>sudo ./cgminer -o stratum+tcp://xxx -u xxx -p xxx --bmsc-options 115200:55 --bmsc-freq 0781 --queue 0 --scan-time 1 --expiry 1 --lowmem
I'm guessing --bmsc-freq 0781 would be 200 mhz. (When i do not include that parameter, i got nothing either)
My parameters under windows => cgminer.exe --bmsc-options 115200:55 --hotplug --lowmem -o stratum+tcp://xxx -u xxx -p xxx
Any idea what is the default freq under windows ? Guessing it's my problem atm.
Thanks
try only --bmsc-options 115200 or --bmsc-options 115200 --bmsc-freq 0781, run with sudo |
|
|
|
My bfgminer won't find all the chips on the board of my Antminer S1 board I use for testing the USB <-> UART adapter CP2102 :
bfgminer version 4.10.0 - Started: [2014-11-28 19:59:48] - [ 0 days 00:02:30]
[M]anage devices [P]ool management [Settings [D]isplay options [H]elp [Q]uit
Pool 0: us1.ghash.io Diff:16 +Strtm LU:[20:01:50] User:lumanet.worker400
Block: ...2de3e667 #332024 Diff:40.3G (288.5P) Started: [19:59:48]
ST:59 F:0 NB:1 AS:0 BW:[ 59/ 23 B/s] E:34.08 I: 3.09uBTC/hr BS:112
1/8 | 5.36/ 4.69/ 6.39Gh/s | A:13 R:0+0(none) HW:25/ 11%
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AMU 0a: | 636.9/576.7/971.1Mh/s | A: 1 R:0+0(none) HW: 8/ 19%
AMU 0b: | 623.3/576.7/599.7Mh/s | A: 1 R:0+0(none) HW: 5/ 19%
AMU 0c: | 623.3/576.7/771.0Mh/s | A: 0 R:0+0(none) HW: 2/6.9%
AMU 0d: | 0.62/ 0.58/ 1.06Gh/s | A: 4 R:0+0(none) HW: 3/7.5%
AMU 0e: | 623.3/576.7/514.0Mh/s | A: 3 R:0+0(none) HW: 2/ 10%
AMU 0f: | 623.3/576.7/856.7Mh/s | A: 4 R:0+0(none) HW: 2/6.2%
AMU 0g: | 623.3/576.7/856.7Mh/s | A: 0 R:0+0(none) HW: 2/6.2%
AMU 0h: | 623.3/576.7/542.6Mh/s | A: 0 R:0+0(none) HW: 4/ 17%
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Select processor to manage using up/down arrow keys
AMU 0b: | 516.6/528.0/588.0Mh/s | A: 1 R:0+0(none) HW: 3/ 18%
CP2102 USB to UART Bridge Controller from Silicon Labs
Serial: 0001
Can anyone help me what am I missing in my config ... this is on a Raspberry PI B+ with bfgminer 4.10 hand compiled with ANT enabled :-) :
bfgminer \
-o stratum+tcp://us1.ghash.io:3333 -u lumanet.worker400 -p x \
-o stratum+tcp://uk1.ghash.io:3333 -u lumanet.worker400 -p x \
-o stratum+tcp://nl1.ghash.io:3333 -u lumanet.worker400 -p x \
--queue 50 --api-listen --api-allow W:127.0.0.1,W:192.168.0.0/16 --api-port 4030 \
-S antminer:all
Thank you for all the help :-)
bfgminer is not optimised for more than a few chips, so it doesnt know how to talk to them all Ok thank you.... will chat with Luke-Jr to push this forward so that bfgminer will also support all the chips for the Antminers. Also i just checked and BFGminer 5.0.0 is out so I will dig around...... :-) the Thread for BFGMiner 5.0.0 is : https://bitcointalk.org/?topic=877081There is not cgminer at rapsberry? |
|
|
|
|
Any update to S4 binaries?
|
|
|
|
i saw the prize of 10 GHS is 0,001
İs it right?
i want buy 30 gHS
i select 3 x 10 GHS and send 0,003 Btc
not correct, price per 1GHs is 0.001, for 10GHs You should pay 0.01, for 3*10GHs 0.03 then |
|
|
|
Allright, i thought i didn't need to add the --bmsc-options 115200:25
i was using --bmsc-options 115200:55 on my windows machine tho. isn't 25 too low ?
Anyway thanks a lot guys, you're the best ^_^
I forgot, my blades pencil undervolted. Try different numbers, look back in the thread. With my settings it is working perfect. And append what ./cgminer -n returns. Check cables, must be very good fixed into blades, led should be blinking when cgminer starting. I do not connect gnd pin, only RX/TX and it works perfect for many many days. Mine are undervolt to 0.85-0.83 (not more, not less). Running steady at 49.2 - 49.3. with very few HW under windows. Thanks for all the info. i will try with :25 option just to see. 25 MS looks fine that is great, you can be satisfied you cannot get more from one blade than 50GHs imo max i have seen was 65ghs but it was brief. i believe we need heat sinks to get the most out of them. I may have some boards up for sale when I get the ones I ordered. I got a HashFast Yoli evo/habanero that a guy couldn't figure it out. But i may keep them and sell the yoli/hab. I work for a company that is making router. So i have a few heatsink that i can pick from the thrashs for free but i bought 2 kit of small heatsink on ebay. They are a bit small and i think it's all good because the board are undervolt. I use a fan direct on them for the cooldown, they are not hot to the finger. I don't know if you're in the US, but i'm still looking for S1 board. Us to Canada isn't so cheap (when we compare what the board worth...) I just see one peak up to 66 GH/s, CGMiner side tho ;-) steady 49.1 and 49.2 at the moment. 0: AMU 0 : | | 58.12G / 49.22Gh/s WU:687.6/m 1: AMU 1 : | | 49.25G / 49.19Gh/s WU:687.1/m I am in Europe. Czech rep. I do not look for boards, I will buy new miners with better GHs/W division. But I am glad to see the thrash working again. |
|
|
|
Allright, i thought i didn't need to add the --bmsc-options 115200:25
i was using --bmsc-options 115200:55 on my windows machine tho. isn't 25 too low ?
Anyway thanks a lot guys, you're the best ^_^
I forgot, my blades pencil undervolted. Try different numbers, look back in the thread. With my settings it is working perfect. And append what ./cgminer -n returns. Check cables, must be very good fixed into blades, led should be blinking when cgminer starting. I do not connect gnd pin, only RX/TX and it works perfect for many many days. Mine are undervolt to 0.85-0.83 (not more, not less). Running steady at 49.2 - 49.3. with very few HW under windows. Thanks for all the info. i will try with :25 option just to see. 25 MS looks fine that is great, you can be satisfied you cannot get more from one blade than 50GHs imo |
|
|
|
Allright, i thought i didn't need to add the --bmsc-options 115200:25
i was using --bmsc-options 115200:55 on my windows machine tho. isn't 25 too low ?
Anyway thanks a lot guys, you're the best ^_^
I forgot, my blades pencil undervolted. Try different numbers, look back in the thread. With my settings it is working perfect. And append what ./cgminer -n returns. Check cables, must be very good fixed into blades, led should be blinking when cgminer starting. I do not connect gnd pin, only RX/TX and it works perfect for many many days. |
|
|
|
So question ...
My Raspberry Pi is up and running. My cp2102 are plugged into the PI with a usb hub (alimented one). CGMiner runs fine but detect nothing.
[2014-11-27 01:53:49] Started cgminer 4.7.0
[2014-11-27 01:53:50] No devices detected!
[2014-11-27 01:53:50] Waiting for USB hotplug devices or press q to quit
[2014-11-27 01:53:50] Probing for an alive pool
[2014-11-27 01:53:50] Pool 0 difficulty changed to 16
[2014-11-27 01:53:50] Pool 0 difficulty changed to 64
[2014-11-27 01:53:50] Network diff set to 40.3G
[2014-11-27 01:53:50] Stratum from pool 0 requested work restart
[2014-11-27 01:53:54] Stratum from pool 0 detected new block
(5s):0.000 (1m):0.000 (5m):0.000 (15m):0.000 (avg):0.000h/s
LSusb show me all my CP2102 .. which looks like fine.
Bus 001 Device 037: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 001 Device 038: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 001 Device 039: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Any idea ?
try this: sudo ./cgminer -c cgminer.conf --bmsc-options 115200:25 --bmsc-freq 0781 --queue 0 --scan-time 1 --expiry 1 --lowmem --quiet use Your own cgminer.conf or use -o/-O option instead |
|
|
|
I tried sudo ./cgminer -o ... -u ... -p xxx
No luck
thanks
./cgminer -n ? |
|
|
|
i quited NH, too many downtimes and all that
Where did You move? |
|
|
|
|
Show Posts
