herbiehasher
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 100
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2014, 08:34:03 PM |
|
I have the correct IP, the www isn't working but it's hashing. SSH won't connect either. Perhaps I'll do a factory reset. I have always had trouble with this 1 unit, it likes to go drop down to 80 from 180 sometimes. If I can log in and reboot, using the www or ssh, I'll get x's. Only way to clear that is to power off the PSU and power on again. Then I can log in, sometimes.
You might have a faulty controller board. I know, hence the questions about running 4 from 1, or RPI.
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2014, 09:04:18 PM |
|
I have the correct IP, the www isn't working but it's hashing. SSH won't connect either. Perhaps I'll do a factory reset. I have always had trouble with this 1 unit, it likes to go drop down to 80 from 180 sometimes. If I can log in and reboot, using the www or ssh, I'll get x's. Only way to clear that is to power off the PSU and power on again. Then I can log in, sometimes.
You might have a faulty controller board. I know, hence the questions about running 4 from 1, or RPI. You can easily get two CP2102, plug them in a RPI running CGMiner. I'm doing this tonight ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) CP2102 => http://www.ebay.ca/itm/231286561833?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649OR buy that controller from jeppe (who is active here) https://bitcointalk.org/index.php?topic=872489.0
|
|
|
|
sobe-it
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2014, 09:51:02 PM |
|
Yes I just bought s1 boards from him and they will be here Friday.
|
|
|
|
pekatete
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2014, 09:53:56 PM |
|
Yes I just bought s1 boards from him and they will be here Friday.
Any more news on that chaining or the other mods you were onto?
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2014, 10:02:50 PM |
|
Yes I just bought s1 boards from him and they will be here Friday.
Yeah i wish he was in Canada, i would buy some too. Shipping is so bad US => Canada ...
|
|
|
|
WPlug
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 26, 2014, 11:08:38 AM |
|
Did you try just connect RX(one board)-TX(second) to chain?
|
|
|
|
idonothave
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 26, 2014, 11:14:54 AM |
|
also it looks like we may be able to link 2 boards (or more) by desoldering the first and last chip on alternate boards. the last chip has no pin outs to another chip and has a resistor tied to pin 37 (respond input). so technically we tie chip 31 on the first board to chip 2 on the second board and it should simulate 1 board with more chips on single mode. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fscontent-b-ord.xx.fbcdn.net%2Fhphotos-xpa1%2Ft31.0-8%2F10818408_933916279953335_6918473276426243790_o.jpg&t=665&c=__EU5RGYzDRr1A) Did you try just connect RX(one board)-TX(second) to chain? Yep, not working ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
sobe-it
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 26, 2014, 12:37:41 PM |
|
Did you try just connect RX(one board)-TX(second) to chain?
Yep, not working ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) yes i did that and it didnt work. im currently trying to get some desolder braid to try my idea. the last and first chip are off.
|
|
|
|
pekatete
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 26, 2014, 12:50:39 PM |
|
Did you try just connect RX(one board)-TX(second) to chain?
Yep, not working ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) yes i did that and it didnt work. im currently trying to get some desolder braid to try my idea. the last and first chip are off. Now there is a post worth waiting for ..... ! godspeed.
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 26, 2014, 04:01:44 PM |
|
Still looking for some boards BTW, i know most of you are in the US and shipping cost kind of put the board price a bit up for me. Anyone in Canada with some board to sell ? Would be awesome ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif)
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 26, 2014, 05:32:09 PM |
|
Still looking for some boards BTW, i know most of you are in the US and shipping cost kind of put the board price a bit up for me. Anyone in Canada with some board to sell ? Would be awesome ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) I have some in the toronto area. $60/s1 or $45/boards only (including controller). Plus shipping
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 26, 2014, 08:08:12 PM |
|
Still looking for some boards BTW, i know most of you are in the US and shipping cost kind of put the board price a bit up for me. Anyone in Canada with some board to sell ? Would be awesome ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) I have some in the toronto area. $60/s1 or $45/boards only (including controller). Plus shipping PM you.
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2014, 06:52:40 AM |
|
So question ...
My Raspberry Pi is up and running. My cp2102 are plugged into the PI with a usb hub (alimented one). CGMiner runs fine but detect nothing.
[2014-11-27 01:53:49] Started cgminer 4.7.0 [2014-11-27 01:53:50] No devices detected! [2014-11-27 01:53:50] Waiting for USB hotplug devices or press q to quit [2014-11-27 01:53:50] Probing for an alive pool [2014-11-27 01:53:50] Pool 0 difficulty changed to 16 [2014-11-27 01:53:50] Pool 0 difficulty changed to 64 [2014-11-27 01:53:50] Network diff set to 40.3G [2014-11-27 01:53:50] Stratum from pool 0 requested work restart [2014-11-27 01:53:54] Stratum from pool 0 detected new block (5s):0.000 (1m):0.000 (5m):0.000 (15m):0.000 (avg):0.000h/s
LSusb show me all my CP2102 .. which looks like fine.
Bus 001 Device 037: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light Bus 001 Device 038: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light Bus 001 Device 039: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Any idea ?
|
|
|
|
CHAOSiTEC
Legendary
Offline
Activity: 1358
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2014, 11:43:24 AM |
|
So question ...
My Raspberry Pi is up and running. My cp2102 are plugged into the PI with a usb hub (alimented one). CGMiner runs fine but detect nothing.
[2014-11-27 01:53:49] Started cgminer 4.7.0 [2014-11-27 01:53:50] No devices detected! [2014-11-27 01:53:50] Waiting for USB hotplug devices or press q to quit [2014-11-27 01:53:50] Probing for an alive pool [2014-11-27 01:53:50] Pool 0 difficulty changed to 16 [2014-11-27 01:53:50] Pool 0 difficulty changed to 64 [2014-11-27 01:53:50] Network diff set to 40.3G [2014-11-27 01:53:50] Stratum from pool 0 requested work restart [2014-11-27 01:53:54] Stratum from pool 0 detected new block (5s):0.000 (1m):0.000 (5m):0.000 (15m):0.000 (avg):0.000h/s
LSusb show me all my CP2102 .. which looks like fine.
Bus 001 Device 037: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light Bus 001 Device 038: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light Bus 001 Device 039: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Any idea ?
try running it with sudo to see if its a permission problem
|
node-vps.com - Tron / Masternode hosting services
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2014, 02:55:34 PM |
|
I tried sudo ./cgminer -o ... -u ... -p xxx
No luck
thanks
|
|
|
|
idonothave
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2014, 06:28:56 PM |
|
I tried sudo ./cgminer -o ... -u ... -p xxx
No luck
thanks
./cgminer -n ?
|
|
|
|
idonothave
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2014, 06:31:38 PM |
|
So question ...
My Raspberry Pi is up and running. My cp2102 are plugged into the PI with a usb hub (alimented one). CGMiner runs fine but detect nothing.
[2014-11-27 01:53:49] Started cgminer 4.7.0 [2014-11-27 01:53:50] No devices detected! [2014-11-27 01:53:50] Waiting for USB hotplug devices or press q to quit [2014-11-27 01:53:50] Probing for an alive pool [2014-11-27 01:53:50] Pool 0 difficulty changed to 16 [2014-11-27 01:53:50] Pool 0 difficulty changed to 64 [2014-11-27 01:53:50] Network diff set to 40.3G [2014-11-27 01:53:50] Stratum from pool 0 requested work restart [2014-11-27 01:53:54] Stratum from pool 0 detected new block (5s):0.000 (1m):0.000 (5m):0.000 (15m):0.000 (avg):0.000h/s
LSusb show me all my CP2102 .. which looks like fine.
Bus 001 Device 037: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light Bus 001 Device 038: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light Bus 001 Device 039: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Any idea ?
try this: sudo ./cgminer -c cgminer.conf --bmsc-options 115200:25 --bmsc-freq 0781 --queue 0 --scan-time 1 --expiry 1 --lowmem --quiet use Your own cgminer.conf or use -o/-O option instead
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2014, 06:46:39 PM |
|
Allright, i thought i didn't need to add the --bmsc-options 115200:25
i was using --bmsc-options 115200:55 on my windows machine tho. isn't 25 too low ?
Anyway thanks a lot guys, you're the best ^_^
|
|
|
|
idonothave
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2014, 07:26:11 PM |
|
Allright, i thought i didn't need to add the --bmsc-options 115200:25
i was using --bmsc-options 115200:55 on my windows machine tho. isn't 25 too low ?
Anyway thanks a lot guys, you're the best ^_^
I forgot, my blades pencil undervolted. Try different numbers, look back in the thread. With my settings it is working perfect. And append what ./cgminer -n returns. Check cables, must be very good fixed into blades, led should be blinking when cgminer starting. I do not connect gnd pin, only RX/TX and it works perfect for many many days.
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2014, 07:36:59 PM |
|
Allright, i thought i didn't need to add the --bmsc-options 115200:25
i was using --bmsc-options 115200:55 on my windows machine tho. isn't 25 too low ?
Anyway thanks a lot guys, you're the best ^_^
I forgot, my blades pencil undervolted. Try different numbers, look back in the thread. With my settings it is working perfect. And append what ./cgminer -n returns. Check cables, must be very good fixed into blades, led should be blinking when cgminer starting. I do not connect gnd pin, only RX/TX and it works perfect for many many days. Mine are undervolt to 0.85-0.83 (not more, not less). Running steady at 49.2 - 49.3. with very few HW under windows. Thanks for all the info. i will try with :25 option just to see.
|
|
|
|
|