how would anybody know?...
the project still legit so calm down.
The project sound interesting but they premined 200 million coins for a coin that is currently worth 36cents. It doesn't make any sense for it to be valued so high. IMO the cost in generating this coin the price should be $2 to $3 or more. is it so hard to mine? Nope very very easy. |
|
|
|
EDIT: I do have the temperatures of the cards set at a max.. to not exceed 79c ect. And I use to get this but was going to talk about it later. Going to myr-gr also on neoscrypt so not related to algo but memory or ccminer? Maybe intensity setting.  Looks like a null pointer dereference. That's usually software but in your case it could be excess heat in the CPU or RAM. How is the ventilation around the mobo? Maybe heat from the GPUs is destabilizing the CPU. Edit: It could also be bad RAM. Make note if they are always the same, especially the instruction address. It could be a bug in ccminer for neoscrypt lyra2v2 ect. not sure. A fan at high speed but the temperatures were so high, room temp, that I turned off the rig at 1pm to 7pm some times...cooler temp on its way. There's not much I can do until temps drop... it broke records. If it was a bug others would likely also see it, but AFAIK no one else has seen this crash. You're getting corruption in the CPU domain (core, cache, ram), either due to a HW fault or heat induced. If there is a pattern to the fault addresses it's probably a HW fault. If the're random, probably heat induced. Due to the extremely high ambient temperature your sensors may not detect overheating in places where it isn't expected. What is AFAIK? joblo and when that neoscrypt or lyra2v2 that it crashes on once in a great while showing this sign, some people have reported that I think... but also happens at room temp too. There maybe to many cards for windows memory to handle. But will look into what you said. Someone did say they were having problems with those private releases. Thx |
|
|
|
I don't use sha256 and scrypt algo's of course.  That's OK, my 57Th and somone else's 90+TH has brought it up to 321TH for sha256  I got 5x S2 I think there called 1.2 mh each scrypt algo  Sitting on a chair. And a blast from the past. WOW TAKE A LOOK EVERYONE CRACKFOO NH 7-2014  |
|
|
|
Ok Crackfoo working again ...good on all algo's ....I don't use sha256 and scrypt algo's of course. |
|
|
|
Yes I'm mining air now.
You could sell it to combat AGW  I'm going to do lbry on another pool until its fixed.. profits here .009 there .022btc. |
|
|
|
you should lower the fee until you get this ironed out. i had intermitent connection for 4 hours last night mining on lyra2v2 mine.zpool.ca. it seems that it was up and down 50/50.
Yes I'm mining air now. |
|
|
|
how would anybody know?...
the project still legit so calm down.
The project sound interesting but they premined 200 million coins for a coin that is currently worth 36cents. It doesn't make any sense for it to be valued so high. IMO the cost in generating this coin the price should be $2 to $3 or more. |
|
|
|
|
How many coins per hashrate how much BTC earnings per hashrate ect Your missing this info IMO.
But good luck.
|
|
|
|
EDIT: I do have the temperatures of the cards set at a max.. to not exceed 79c ect. And I use to get this but was going to talk about it later. Going to myr-gr also on neoscrypt so not related to algo but memory or ccminer? Maybe intensity setting. Looks like a null pointer dereference. That's usually software but in your case it could be excess heat in the CPU or RAM. How is the ventilation around the mobo? Maybe heat from the GPUs is destabilizing the CPU. Edit: It could also be bad RAM. Make note if they are always the same, especially the instruction address. It could be a bug in ccminer for neoscrypt lyra2v2 ect. not sure. A fan at high speed but the temperatures were so high, room temp, that I turned off the rig at 1pm to 7pm some times...cooler temp on its way. There's not much I can do until temps drop... it broke records. |
|
|
|
EDIT: I do have the temperatures of the cards set at a max.. to not exceed 79c ect. And I use to get this but was going to talk about it later. Going to myr-gr also on neoscrypt so not related to algo but memory or ccminer? Maybe intensity setting. Looks like a null pointer dereference. That's usually software but in your case it could be excess heat in the CPU or RAM. How is the ventilation around the mobo? Maybe heat from the GPUs is destabilizing the CPU. Edit: It could also be bad RAM. Make note if they are always the same, especially the instruction address. Try a different power supply. You'd be amazed how many are bad and have you point the finger somewhere else. Thx That is my 2nd psu and i have a third to sli for my extra 970 but it is hard for windows to recognize it and it crashes within 3 minutes. So since I made some changes I will try again soon. I have a fan at high speed on the rig. This only comes up once in a great while. |
|
|
|
skein no connection ether Crackfoo on 2 different rigs.. there just sitting with the command window open.
did you try restarting them? They may not like the DNS change... Yes still no good. and now myr-gr not working. most the algo's are down...what did you do? ? time for bed .... can you try mine1 and mine2 and see which is failing? All I did was setup another stratum server and add that IP to mine.zpool.ca.... shoulnd't have really affected much... mine1 is the original server and mine2 is the new one.... This is the server I use stratum+tcp://mine.zpool.ca I never used mine1 or 2 and Minercontrol doesn't recognized your pool now. |
|
|
|
skein no connection ether Crackfoo on 2 different rigs.. there just sitting with the command window open.
did you try restarting them? They may not like the DNS change... Yes still no good. and now myr-gr not working. most the algo's are down...what did you do? ? time for bed .... |
|
|
|
skein no connection ether Crackfoo on 2 different rigs.. there just sitting with the command window open.
did you try restarting them? They may not like the DNS change... Yes still no good. and now myr-gr not working. most the algo's are down...what did you do? |
|
|
|
for the unbelievers: LBRY block came with just 400 Mh/s
I know eh! geeez, which more miners would pick it up. Another block. Lets keep the momentum going! How many coins per block? thx |
|
|
|
|
skein no connection ether Crackfoo on 2 different rigs.. there just sitting with the command window open.
|
|
|
|
And where is that command plz on keeping the rig in the administrative mode on reboot. Thx
"c:\progra~1\nvidia\NVSMI\nvidia-smi.exe -acp UNRESTRICTED" removes the admin requirements..... Run as administrator in command prompt. I havent tried rebooting to see if this needs repeated on boot. if so, it will need to be automated at boot-up somehow. But one p-state issue ive tracked to the neoscrypt algo. Try removing it for a time and see how much it helps. Thx JK see my post on zpool plz. https://bitcointalk.org/index.php?topic=1260863.msg15712991#msg15712991But I still may give this a try.  |
|
|
|
|
You do know you'll have no gpu support ...lost 80% of miners... IMO.
Make it a gpu algo.
|
|
|
|
I also have an issue with ccminer, noescrypt version, on my gaming rig I have 3 cards on is for normal use and gaming the other 2 I mine with, my hashrate drops to 2-4k from 1.5mh when i try paying games, even the power and temps drop to idle speed, 2 cards are in a 16x slot and one other in a 1x slot(riser).
it's not surprising that neoscrypt causes problems but I think it's more the algo than anything. It is the highest memory usage per miner on my pool.... Yeah. I was getting crazy p-state locks requiring me to reboot to get out of P8 state (150Mhz gpu clock and ~800mhz mem clock)... I think neoscrypt is going to be dropped out of my batch even though it pays good and quick. le sigh. More testing once removed and a batch update. Hi JK...all I can say is that I can't put my hi end cards in the p0 state because it will crash more and other people I know that had them in the p0 state reported the same thing...I believe on those algo's . So they went back to the p2 state. But many times on lyra2v2 and neoscrypt is where I have the most crashes. Hope that helps. AMPH was one who had that problem and took her cards back to the p2 state. |
|
|
|
|
And where is that command plz on keeping the rig in the administrative mode on reboot. Thx
|
|
|
|
Thx JK I have done this. Will that keep them in the p0 state on reboot?
EDIT: I'm going to give this a try again asap. thx
No.. this will have to have admin rights first deactivated (check zpool thread for command) then reboot, and it shouldn't need admin rights anymore. then add the path to the NVSMI folder to the system PATH and you can just call it from any old command prompt/provision allotment =) Issue the memory and clock set command every reboot, or better right before the miner app launches. Thx JaredKaragen looking into it. And where is that command plz on keeping the rig in the administrative mode on reboot. Thx |
|
|
|
|
Show Posts
