Hi JaredKaragen....how you been?  Thx for your mining app. EDIT: There is no read me file....I'll try using :start rem for 750ti -l 8x30 set xmrAddress=addy set poolPassword=x set poolUrl=stratum+tcp://poolxxx:1234 set launchParam=-l 8x30 rem greater value means more interactivity of your system but lower hash rate set bFactor=10 rem time between a kernel start set bSleep=100 xmrMiner_xmr-stak.exe --url=%poolUrl% -u %xmrAddress% -p %poolPassword% %launchParam% --bfactor=%bFactor% --bsleep=%bSleep% goto start Hope this works. |
|
|
|
Ok which thread should we use? thx |
|
|
|
I highly recommend not using this miner because I had no pool setup and after 3 minutes it says it's mining on my pool.  I believe it just keeps on mining on his pool. but I have the opposite, I really began to see on the pool what the miner shows, show the batch file, can something you do wrong? on the first page about these 3 minutes all painted. I switched to this miner from version 2, and mine production increased compared to what NEMOS offers What pool? I have no pool setup in that folder? That mining app. should after 3 minutes of mining say... no pool found... shutting down. Ok I'll try again ..... open app. it's mining on his pool. Ok 3 minutes later.. it tries to mine on my pool and stops mining on his pool ok. Now I have no pool bat file setup ok. But it is still mining. It should close the cmd window. |
|
|
|
I highly recommend not using this miner because I had no pool setup and after 3 minutes it says it's mining on my pool. I believe it just keeps on mining on his pool. but I have the opposite, I really began to see on the pool what the miner shows, show the batch file, can something you do wrong? on the first page about these 3 minutes all painted. I switched to this miner from version 2, and mine production increased compared to what NEMOS offers What pool? I have no pool setup in that folder? That mining app. should after 3 minutes of mining say... no pool found... shutting down. |
|
|
|
I highly recommend not using this miner because I had no pool setup and after 3 minutes it says it's mining on my pool. I believe it just keeps on mining on his pool. |
|
|
|
We need someone good at graphics to make a banner. See the 250x250 promos on the right of https://www.altcoininvestingnews.com/We can get one on their homepage for free, so it's a pretty good deal ;-) Let me make you something. Give me about 30 minutes. =)  Here you go~ Hope it isn't too bad, it's not much space to work with. Also great interview! Very nice. |
|
|
|
My opinion "Does not promise anything new. copy paste project. (copy x16r algo and paste del random write shuffle it is new algo x16s ) It's a useless project that tries to take advantage of ravencoin's popularity."
amen brother.. a16s seems to be a good smart improvement of x16r, so RVN devs can easily adopt it into RVN and continue on theirs roadmap. PGN is proof of concept only, not real coin at all. RVN has community and skilled fulltime devs, PGN has one student, the smart one but still one student without experiences with leading big projects, or company in general. So thanks to x16s, DEvs can consider merge them into RVN, but that's all Wasn't Bitcoin proof of concept too? |
|
|
|
Is that 20% more than ccminer or 20% more than enemy miner? tested both miners Ccminernevermore and enemy cards 3*1060 and 1*1080 Ccminernevermore = 32.7 Mh enemy = 32.4 Mh where there can be a difference of 20%? That's what I thought because ... ccminer is already 20% slower. Now = enemy miner. |
|
|
|
Is that 20% more than ccminer or 20% more than enemy miner? |
|
|
|
if they can tweak it like they did for light version, v7 isn't that much of a barrier
They should change the pow to something else. Like lyra2z+spread / x32r chained.  Yes.. that would be nice. |
|
|
|
Need a new forked version of this coin.... with matching new coins (Air drop) for those you hold C-Note on an exchange/wallet  I bet we'd see the C-Note price come up lol How about CNOTEZ or CNOTE16 use Equihash or the newer x16r algo if it could be done  Of course the new coin would have to have something going for it.... Okay still dreaming lol Yes that would be nice x16r or x16s. |
|
|
|
it might be because no blocks has been found in 2 weeks, try start mining using your wallet everyone!
But you need to sync the wallet first.  |
|
|
|
The lack of a fair launch is troubling. 5 friends from discord getting together on a channel that no one has any way of finding and calling it "public" does not make a fair launch. Maybe someone can make a x16s fork called "Hawkcoin", make an ANN FIRST, NOT LAST and set a 48-hour countdown to launch? Edit: you gotta love this gem from the ANN: On day five, I asked our group of twelve to start onboarding more miners... Admits that for 5 days, no attempt was made to grow beyond 12 people. Please, please read that again: TWELVE PEOPLE WERE THE ONLY ONES MINING FOR 5 DAYS. These 12 are going to get rich from your buys. Yup which = premined. |
|
|
|
How do I obtain my private key from my Boolberry windows wallet? I like to document my keys on paper and keep them in a safe just in case.
Also, roughly how many coins can I expect per day can I expect with a gtx 1070? I've never mined on wild keccak before so I'm not sure which hashrate to enter into the calculator.
Im not too sure about your first question (sorry about that) but as for the second one, Ive been using a 1060 for the past couple months and its comfortably getting from 1.1 to 1.2 coins a day which is about 1.3 to 1.45 mH/s. But i used to use a 780 and i was getting just as much so that kinda surprised me. Also a friend is using a 1080 and he was getting maybe 100 more kH/s than with my 1060. Maybe I'm just doing something wrong with configs or something but Ive never been able to get past 1.5 mH/s with just one card. Thanks! 1080's have GDDR5X instead of GDDR5 on 1060/1070, and this is why the 1070 is about the same performance on ETH and more efficient than the 1080. The most efficient card I have seen is the RX 470, which is about 16 kH/watt, the Titan V is 40+kh/watt, but at $3,000, I hate to call it the most efficient. Here are some #'s from my experience. - GTX1060 - 1.2-1.3 MH/s (mem +120 core +800)
- GTX1070 - 1.7-1.8 MH/s (mem +0 core +1400)
- RX470 - 1.6 MH/s (mem 1990 core 1190)
- RX570 - 1.6 MH/s (mem 1980 core 1160)
- RX580 - 1.9-2 MH/s (mem 2040 core 1200)
- RX Vega 64 / FE - 2.4 MH/s (I believe this could be optimized to be 4 MH/s+ based on its performance on CryptoNight)
- Titan V - 4.2 MH/s
[2018-03-24 17:32:17] GPU #0: 1341 MHz 38.65 kH/W 22W 45C FAN 56% [2018-03-24 17:32:24] GPU #0: Gigabyte GTX 750 Ti, 890.35 kH/s Hi tbearhere, Is it Overclocked? What settings may I ask? On windows or linux? Kindest regards, Garak  Using Windows. ccminer-x64-2.2.2-cuda7.5.exe -a wildkeccak -t 2 -l 60x256
|
|
|
|
How do I obtain my private key from my Boolberry windows wallet? I like to document my keys on paper and keep them in a safe just in case.
Also, roughly how many coins can I expect per day can I expect with a gtx 1070? I've never mined on wild keccak before so I'm not sure which hashrate to enter into the calculator.
Im not too sure about your first question (sorry about that) but as for the second one, Ive been using a 1060 for the past couple months and its comfortably getting from 1.1 to 1.2 coins a day which is about 1.3 to 1.45 mH/s. But i used to use a 780 and i was getting just as much so that kinda surprised me. Also a friend is using a 1080 and he was getting maybe 100 more kH/s than with my 1060. Maybe I'm just doing something wrong with configs or something but Ive never been able to get past 1.5 mH/s with just one card. Thanks! 1080's have GDDR5X instead of GDDR5 on 1060/1070, and this is why the 1070 is about the same performance on ETH and more efficient than the 1080. The most efficient card I have seen is the RX 470, which is about 16 kH/watt, the Titan V is 40+kh/watt, but at $3,000, I hate to call it the most efficient. Here are some #'s from my experience. - GTX1060 - 1.2-1.3 MH/s (mem +120 core +800)
- GTX1070 - 1.7-1.8 MH/s (mem +0 core +1400)
- RX470 - 1.6 MH/s (mem 1990 core 1190)
- RX570 - 1.6 MH/s (mem 1980 core 1160)
- RX580 - 1.9-2 MH/s (mem 2040 core 1200)
- RX Vega 64 / FE - 2.4 MH/s (I believe this could be optimized to be 4 MH/s+ based on its performance on CryptoNight)
- Titan V - 4.2 MH/s
[2018-03-24 17:32:17] GPU #0: 1341 MHz 38.65 kH/W 22W 45C FAN 56% [2018-03-24 17:32:24] GPU #0: Gigabyte GTX 750 Ti, 890.35 kH/s |
|
|
|
My wallet won't sync. Running windows v0.11.1.0. And I had the version before this. They start with getting 1,000 blocks... then just sits there..for hours. I tried running as administrator ... set_log 4....and nothing seems to work. It sometimes shows in green I have 12 blocks left. Then it goes back to orange saying 92,000 blocks left and freezes there for a long time. Any help plz? Thx Could you go to the Settings page and press Show status? Subsequently, post the full output here. snip This? 5 seconds after I told it to connect to daemon. EDIT: I'm running the latest version. Note that the last line is the most recent line. If you press Show status again, is it still on block 1467526? Here it is after 15 minutes open. Height: 1474180/1535984 (96.0%) on mainnet, not mining, net hash 501.68 MH/s, v6, update needed, 6(out)+1(in) connections, uptime 0d 0h 0m 25s Height: 1474220/1535984 (96.0%) on mainnet, not mining, net hash 501.29 MH/s, v6, update needed, 10(out)+2(in) connections, uptime 0d 0h 2m 37s Height: 1474400/1535993 (96.0%) on mainnet, not mining, net hash 520.68 MH/s, v6, update needed, 8(out)+2(in) connections, uptime 0d 0h 15m 8s Then it's still syncing properly. I'd advise to simply be patient and wait for the initial sync to complete. Note that catching up thereafter every few days (or every week) only takes insignificant amount of time. Here's the problem though .. it locks up here and never moves. In fact it goes backwards ... getting the new blocks. EDIT: In fact I had it open for 8 hours one time and no change. Now it's doing nothing. It's like it stops listening. Height: 1474440/1535998 (96.0%) on mainnet, not mining, net hash 517.11 MH/s, v6, update needed, 8(out)+2(in) connections, uptime 0d 0h 29m 20s Height: 1474440/1535998 (96.0%) on mainnet, not mining, net hash 517.11 MH/s, v6, update needed, 8(out)+2(in) connections, uptime 0d 0h 38m 21s  EDIT AGAIN: It seems to be catching up.. very very slowly. Thx |
|
|
|
My wallet won't sync. Running windows v0.11.1.0. And I had the version before this. They start with getting 1,000 blocks... then just sits there..for hours. I tried running as administrator ... set_log 4....and nothing seems to work. It sometimes shows in green I have 12 blocks left. Then it goes back to orange saying 92,000 blocks left and freezes there for a long time. Any help plz? Thx Could you go to the Settings page and press Show status? Subsequently, post the full output here.  This? 5 seconds after I told it to connect to daemon. EDIT: I'm running the latest version. Note that the last line is the most recent line. If you press Show status again, is it still on block 1467526? Here it is after 15 minutes open. Height: 1474180/1535984 (96.0%) on mainnet, not mining, net hash 501.68 MH/s, v6, update needed, 6(out)+1(in) connections, uptime 0d 0h 0m 25s Height: 1474220/1535984 (96.0%) on mainnet, not mining, net hash 501.29 MH/s, v6, update needed, 10(out)+2(in) connections, uptime 0d 0h 2m 37s Height: 1474400/1535993 (96.0%) on mainnet, not mining, net hash 520.68 MH/s, v6, update needed, 8(out)+2(in) connections, uptime 0d 0h 15m 8s |
|
|
|
It's interesting how much the hashrate will be decreased after the hardfork. Can we really go back to the old numbers. There will be no ASICs, there will be no part of botnets (since their mining software will not be updated immediately).
I'm hoping that Nvidia cards will suck at the new algo. [hand rubbing intensifies] Why... AMD dominates the cryptonote type algo's now. |
|
|
|
My wallet won't sync. Running windows v0.11.1.0. And I had the version before this. They start with getting 1,000 blocks... then just sits there..for hours. I tried running as administrator ... set_log 4....and nothing seems to work. It sometimes shows in green I have 12 blocks left. Then it goes back to orange saying 92,000 blocks left and freezes there for a long time. Any help plz? Thx Could you go to the Settings page and press Show status? Subsequently, post the full output here. This? 5 seconds after I told it to connect to daemon. EDIT: I'm running the latest version. |
|
|
|
My wallet won't sync. Running windows v0.11.1.0. And I had the version before this. They start with getting 1,000 blocks... then just sits there..for hours. I tried running as administrator ... set_log 4....and nothing seems to work. It sometimes shows in green I have 12 blocks left. Then it goes back to orange saying 92,000 blocks left and freezes there for a long time. Any help plz? Thx |
|
|
|
|
Show Posts
