what else should I add in there to work simultaneously two antminer u3
If you read this thread you'll find that more people had problems running more than 1 U3 at the same time than could do so successfully. You may be in the majority where you can only have one U3 running at a time. It could be luck but I have 3 U3's running right now. They do zombie out sometimes but are fun to play with. To be fair it's not that they zombie out a ton, it's just that I don't notice it right away as I don't keep a eye on them as much as some might. what is a zombie?why u3 to become zombies?how to fix it? Unplug power and usb on miner, then plug back in. It should fix it. If that does not fix it try restarting cgminer (or what ever program your using) it's understandable.my question is,why u3 turns into a zombie?why is this and how can we avoid this??
|
|
|
what else should I add in there to work simultaneously two antminer u3
If you read this thread you'll find that more people had problems running more than 1 U3 at the same time than could do so successfully. You may be in the majority where you can only have one U3 running at a time. It could be luck but I have 3 U3's running right now. They do zombie out sometimes but are fun to play with. To be fair it's not that they zombie out a ton, it's just that I don't notice it right away as I don't keep a eye on them as much as some might. what is a zombie?why u3 to become zombies?how to fix it?
|
|
|
the penultimate version,the latest version is also constant crashing when playing on 999dice give me a version number. You might not know of a later release or something. I tried playing on 999dice and it works fine and i cannot get those errors. DiceBot-3.0.2 .Seuntji this error occurred to me about 6 times a day.after that I downloaded the latest version.in the new version the bug occurs.the bug is that the bot shows zero balance for a few seconds then become normal and after a few minutes shows 0 again.
|
|
|
the penultimate version,the latest version is also constant crashing when playing on 999dice
|
|
|
Guys dear,please help me.I bought two antminer u3 and wanted to connect them to the laptop but nothing happened.Managed to connect only one of u3,two u3 did not want to work in.I believe that the problem lies in the fact that in the bat file I have written only one device.I don't understand and don't know how to register two devices.may need to add something in the config,but I don slightest and have no idea how to do it.help tell me what to do.if you can give an example of a bat file or config.the hope is only for the your help.thanks for earlier.
What version of CGminer are you using? Also you telling it the one device and not other two? That would for sure cause it. Try without picking specific device. As long as you have only U3's connected it will work fine. If you have other miners yes it will be harder. I use cgminer 4.8.0 .when connected one device then everything works fine.when two devices are attached nothing happens.production will not start.I saw somewhere that in order to connect two or more miners need to use the command -d ,but how to use it?where to write ?I do not understand and do not represent. Go ahead and try a newer verision 4.9.2 is what I'm using. I'm not aware of a reason to keep it old with the U3's. Remove the -d and it should find all U3's. If not try unplugging power and usb from all miners and see if you and replug them (in case they hit that zombie mode). I downloaded cgminer 4.9.2 but I do not understand how to start.he asks to register the url.what is a url?? I'm sorry I do not understand how to use cgminer.I know how to run cgminer only through .bat file.I also put in .bat cgminer.exe --bmsc-options 115200:0.6 -o stratum+tcp://thecoin.pw:3540 -xxxxxxx -p xxxxx --bmsc-voltage 0800 --bmsc-freq 1286 .when you run .bat file to open cgminer window for a split second and closes.nothing else happens.help me please.what am I doing wrong. I don't know anything in cgminer. asks to register the url.what is a url stratum+tcp://thecoin.pw:3540 ck-'s cgminer does not use --bmsc for the U3's, it's --au3-freq 225 <225 is default, you can use up to 250> --au3-volt 775 <775 is default, use from 725 - 850, what ever gives you best hash at your freq>. thank you.now I know where to set the frequency and the voltage in cgminer 4.9.2 look what .bat file I get cgminer -o stratum+tcp://thecoin.pw:3540 -u xxx -p xxx -o stratum+tcp://thecoin.pw:3541 -u xxx -p xxx --au3-freq 250 --au3-volt 800 .but the question remains open what else should I add in there to work simultaneously two antminer u3
|
|
|
Guys dear,please help me.I bought two antminer u3 and wanted to connect them to the laptop but nothing happened.Managed to connect only one of u3,two u3 did not want to work in.I believe that the problem lies in the fact that in the bat file I have written only one device.I don't understand and don't know how to register two devices.may need to add something in the config,but I don slightest and have no idea how to do it.help tell me what to do.if you can give an example of a bat file or config.the hope is only for the your help.thanks for earlier.
What version of CGminer are you using? Also you telling it the one device and not other two? That would for sure cause it. Try without picking specific device. As long as you have only U3's connected it will work fine. If you have other miners yes it will be harder. I use cgminer 4.8.0 .when connected one device then everything works fine.when two devices are attached nothing happens.production will not start.I saw somewhere that in order to connect two or more miners need to use the command -d ,but how to use it?where to write ?I do not understand and do not represent. Go ahead and try a newer verision 4.9.2 is what I'm using. I'm not aware of a reason to keep it old with the U3's. Remove the -d and it should find all U3's. If not try unplugging power and usb from all miners and see if you and replug them (in case they hit that zombie mode). I downloaded cgminer 4.9.2 but I do not understand how to start.he asks to register the url.what is a url?? I'm sorry I do not understand how to use cgminer.I know how to run cgminer only through .bat file.I also put in .bat cgminer.exe --bmsc-options 115200:0.6 -o stratum+tcp://thecoin.pw:3540 -xxxxxxx -p xxxxx --bmsc-voltage 0800 --bmsc-freq 1286 .when you run .bat file to open cgminer window for a split second and closes.nothing else happens.help me please.what am I doing wrong. I don't know anything in cgminer.
|
|
|
Guys dear,please help me.I bought two antminer u3 and wanted to connect them to the laptop but nothing happened.Managed to connect only one of u3,two u3 did not want to work in.I believe that the problem lies in the fact that in the bat file I have written only one device.I don't understand and don't know how to register two devices.may need to add something in the config,but I don slightest and have no idea how to do it.help tell me what to do.if you can give an example of a bat file or config.the hope is only for the your help.thanks for earlier.
What version of CGminer are you using? Also you telling it the one device and not other two? That would for sure cause it. Try without picking specific device. As long as you have only U3's connected it will work fine. If you have other miners yes it will be harder. I use cgminer 4.8.0 .when connected one device then everything works fine.when two devices are attached nothing happens.production will not start.I saw somewhere that in order to connect two or more miners need to use the command -d ,but how to use it?where to write ?I do not understand and do not represent.
|
|
|
Guys dear,please help me.I bought two antminer u3 and wanted to connect them to the laptop but nothing happened.Managed to connect only one of u3,two u3 did not want to work in.I believe that the problem lies in the fact that in the bat file I have written only one device.I don't understand and don't know how to register two devices.may need to add something in the config,but I don slightest and have no idea how to do it.help tell me what to do.if you can give an example of a bat file or config.the hope is only for the your help.thanks for earlier.
|
|
|
There isn't really a way to have a delay with the programming mode that doesn't make the bot hang. (might be a possible futute add on)
If you dont mind the bot hanging, you can make a while loop that checks the time and only continues if 5 minutes have passed, but this will cause one cpu core to run at 100%.
The alternative is to use the sleep or pause method. I'm on my phone right now, so I cant check which it is how it works, but it's been discusswd before. Check the firts few posts of this thread or some of the last few pages of the bots' own thread
I do not presume you to advise something,You're the genius who created this super bot,but from my observations at work 999dice bot for a reference to which I once gave delay a very good Supplement strategy and helps to achieve better results.it would be very cool if you added a custom delay function let's say after a certain number of losses,but you decide you are the Creator and the Creator,and I'm just a user and this is my personal observation
|
|
|
p.s. at the time when the bot stopped working I decided to try to make a bet via the browser,an error appears saying something like "the seed must not be empty"
All you have to do in the browser is to refresh the site.. There was an update concerning the provably fair system that took place (therefore the error you saw). Yes I updated the page,but the bot still does not bet in other casino everything runs like clockwork.I'm so confused
|
|
|
p.s. at the time when the bot stopped working I decided to try to make a bet via the browser,an error appears saying something like "the seed must not be empty"
All you have to do in the browser is to refresh the site.. There was an update concerning the provably fair system that took place (therefore the error you saw). Yes I updated the page,but the bot still does not bet
|
|
|
p.s. at the time when the bot stopped working I decided to try to make a bet via the browser,an error appears saying something like "the seed must not be empty"
|
|
|
Dear seuntjie,today, after the appearance of the admins in the casino rollin.io stopped working bot,in other casinos all works fine,but in rollin.io bot don't do rates not through the manual mode is not the mode of the programmer,I thought the problem with the IP,I changed it cleaned the folder appdata/dicebot but it gave no results,what should I do?what I can advise?looking forward to the answer.thank you.
|
|
|
Legion of BOOM..... New version of the 39.6% script. Several changes. Same warnings apply, this can and will bust. Your just hoping not to bust till you've made back your bankroll plus some profit. This one is setup to bet based on your balance. It's a martingale/reverse martingale. The starting bet is set up to cover a 20 lose streak. (20 bets). Randomly it will bet based on a 10 lose streak. That's the BOOM part. It's currently setup to try this about 5% of the time. R = math.random(1,20) This statement assigns R a random value between 1 and 20. if(R == 17) then nextbet = balance / boomrisk print("BOOM") end 17 is my lucky number so it R equals 17 try the higher bet. This is only done in the section of code where we calculate a new base bet. This does all of the same investments as the other bots. It also randomly switches hi/lo 10% of the times on loses. I started out trying the Boom at 1% (random number 1-100). But it didn't hit enough for my liking. I changed it to 5%. The first run ended with a 10 lose streak on the BOOM cycle. This was after about 60% win back. So I lost about 40% of my initial bankroll (2 Clams) (ended with 1.2). Next run is still going, Same setup, started with 2 clams. Current profit is 2.1 clams. Current balance is 2.05 So this run I'm now playing with the houses clams. I'll update once this run finishes. EDIT: Run busted on a Boom cycle. profit was 1.1 clams. chance = 39.6 martimulti = 1.85 streak = 20 risk = (martimulti ^ streak) * (streak/(streak *(martimulti - 1))) print(risk) boomstreak = 10 boomrisk = (martimulti ^ boomstreak) * (boomstreak/(boomstreak *(martimulti - 1)))
startbalance = balance nextbet = balance / risk basebet = balance / risk
savefactor = 1.25 target = .01 targetbalance = balance + target bethigh = true low = 0 high = 0 losecount = 0 stopnow = false totallose = 0 wincount = 0 nextwinbet = basebet * martimulti
function dobet()
if (win) then wincount += 1 totallose = 0 newbalance = balance nextbet = balance / risk base = true if (stopnow) then stop() end if (wincount > 2 ) then nextbet = previousbet + (lastBet.profit /2) base = false else R = math.random(1,20) if(R == 17) then nextbet = balance / boomrisk print("BOOM") end end losecount = 0 if (balance > targetbalance) then invest((balance - targetbalance)+target) targetbalance = targetbalance + target newbalance = targetbalance end if (newbalance > startbalance * savefactor) then invest(balance-startbalance) targetbalance = startbalance + target startbalance = startbalance * savefactor end else if (losecount == 0 and !base) then nextbet = balance / risk base = true else nextbet = previousbet * martimulti base = false end losecount += 1 print(losecount) if (math.random() < .1) then bethigh = !bethigh end wincount = 0 end end
Dear chilly2k,my question is it possible to disable the function of investing in the strategy Legion BoMMM.If Yes tell me how please You've got 2 choices. You can make savefactor and target large numbers. Something you will never reach based on your balance. Maybe set them both to 10. This will mean the checks in the code will never be true. Or. You can comment out both lines that start with invest( The code will still do the checks and reset internal stuff, but won't do the invest then. In the end they will bot avoid the invest function. Anything on a line after -- is treated as a comment. So you just add -- to the front of the line. Dear chilly2k thank you so much,you always help me,I don't know what I'd do without you.thank you.
|
|
|
Legion of BOOM..... New version of the 39.6% script. Several changes. Same warnings apply, this can and will bust. Your just hoping not to bust till you've made back your bankroll plus some profit. This one is setup to bet based on your balance. It's a martingale/reverse martingale. The starting bet is set up to cover a 20 lose streak. (20 bets). Randomly it will bet based on a 10 lose streak. That's the BOOM part. It's currently setup to try this about 5% of the time. R = math.random(1,20) This statement assigns R a random value between 1 and 20. if(R == 17) then nextbet = balance / boomrisk print("BOOM") end 17 is my lucky number so it R equals 17 try the higher bet. This is only done in the section of code where we calculate a new base bet. This does all of the same investments as the other bots. It also randomly switches hi/lo 10% of the times on loses. I started out trying the Boom at 1% (random number 1-100). But it didn't hit enough for my liking. I changed it to 5%. The first run ended with a 10 lose streak on the BOOM cycle. This was after about 60% win back. So I lost about 40% of my initial bankroll (2 Clams) (ended with 1.2). Next run is still going, Same setup, started with 2 clams. Current profit is 2.1 clams. Current balance is 2.05 So this run I'm now playing with the houses clams. I'll update once this run finishes. EDIT: Run busted on a Boom cycle. profit was 1.1 clams. chance = 39.6 martimulti = 1.85 streak = 20 risk = (martimulti ^ streak) * (streak/(streak *(martimulti - 1))) print(risk) boomstreak = 10 boomrisk = (martimulti ^ boomstreak) * (boomstreak/(boomstreak *(martimulti - 1)))
startbalance = balance nextbet = balance / risk basebet = balance / risk
savefactor = 1.25 target = .01 targetbalance = balance + target bethigh = true low = 0 high = 0 losecount = 0 stopnow = false totallose = 0 wincount = 0 nextwinbet = basebet * martimulti
function dobet()
if (win) then wincount += 1 totallose = 0 newbalance = balance nextbet = balance / risk base = true if (stopnow) then stop() end if (wincount > 2 ) then nextbet = previousbet + (lastBet.profit /2) base = false else R = math.random(1,20) if(R == 17) then nextbet = balance / boomrisk print("BOOM") end end losecount = 0 if (balance > targetbalance) then invest((balance - targetbalance)+target) targetbalance = targetbalance + target newbalance = targetbalance end if (newbalance > startbalance * savefactor) then invest(balance-startbalance) targetbalance = startbalance + target startbalance = startbalance * savefactor end else if (losecount == 0 and !base) then nextbet = balance / risk base = true else nextbet = previousbet * martimulti base = false end losecount += 1 print(losecount) if (math.random() < .1) then bethigh = !bethigh end wincount = 0 end end
Dear chilly2k,my question is it possible to disable the function of investing in the strategy Legion BoMMM.If Yes tell me how please
|
|
|
dear seuntjie please tell me in what folder and what file format you need to put strategies to appear and you could choose Quick Select Strategy???
|
|
|
I has loss use 302 version bug at preset list betting at just dice and use preset list 0,00000001 0,00000001 0,00000001 0,00000001 0,00000002 0,00000002 0,00000002 0,00000002 0,00000004 0,00000004 0,00000004 0,00000004 0,00000008 0,00000008 0,00000008 0,00000008 0,00000016 0,00000016 0,00000016 0,00000016 0,00000032 0,00000032 0,00000032 0,00000032 0,00000064 0,00000064 0,00000064 0,00000064 0,00000128 0,00000128 0,00000128 0,00000128 0,00000256 0,00000256 0,00000256 0,00000256 0,00000512 0,00000512 0,00000512 0,00000512 0,00001024 0,00001024 0,00001024 0,00001024 0,00002048 0,00002048 0,00002048 0,00002048 0,00004096 0,00004096 0,00004096 0,00004096 0,00008192 0,00008192 0,00008192 0,00008192 0,00016384 0,00016384 0,00016384 0,00016384 0,00032768 0,00032768 0,00032768 0,00032768 0,00065536 0,00065536 0,00065536 0,00065536 0,00131072 0,00131072 0,00131072 0,00131072 0,00262144 0,00262144 0,00262144 0,00262144 0,00524288 0,00524288 0,00524288 0,00524288 0,01048576 0,01048576 0,01048576 0,01048576 0,02097152 0,02097152 0,02097152 0,02097152 0,04194304 0,04194304 0,04194304 0,04194304 0,08388608 0,08388608 0,08388608 0,08388608 0,16777216 0,16777216 0,16777216 0,16777216 0,33554432 0,33554432 0,33554432 0,33554432 0,67108864 0,67108864 0,67108864 0,67108864 this my list but after 2 bet 0.00000001 , 0.00000001 and the go to bet 1 , 1 , 2 clam then bust http://postimg.org/image/s82qq6i4n/but at martiangle so nice dude I don't understand the meaning of your strategy.with these settings you need to play at 15-17% to be in the black or am I wrong
|
|
|
|