|
WTB 1 EAC 0.1 BTC PM offers
|
|
|
|
Guys, is this work rate and utility rate ok? Currently mining DOGE  Utility rate feels a little low but hash and WU look ok (ish)... Running an R290 desperately in need of a better cooler to stop it throttling. Your work utility is ~8 but it looks like you've been running for a little over a minute. More time is needed to get some shares accepted and see some stats. Of the stats I can see I can suggest a few things. Your intensity should be 19 or 20 and your fan should be running considerably faster than it is. The 290 cooler can do a perfectly adequate job if you spin it up high enough that it sounds like a hair dryer. I'd suggest setting the fan limit to 65-70 if you don't have to be in the same room as it very often (or if you own earplugs). Thanks for the input, it has been running for an hour now, U is roughly 6.1, WU 690 and Kh/s 750. If I turn the fan up to 75 I can get 810 out of the card, increasing the intensity to 19/20 seems to make no discernible difference from what I can see. 411 accepted shares, 10.17% reject and 2.75% stale according to CGWatcher. Here are my settings... {
"pools" : [
{
"name" : "stratum01.hashco.ws",
"url" : "stratum+tcp://stratum01.hashco.ws:8888",
"pool-priority" : "0"
},
{
"name" : "eu-1.liteguardian.com",
"url" : "stratum+tcp://eu-1.liteguardian.com:3335",
"pool-priority" : "1"
}
],
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-port" : "4028",
"expiry" : "30",
"hotplug" : "5",
"kernel-path" : "/usr/local/bin",
"log" : "5",
"no-submit-stale" : true,
"queue" : "1",
"scan-time" : "15",
"scrypt" : true,
"shares" : "0",
"gpu-threads" : "1",
"gpu-dyninterval" : "7",
"gpu-engine" : "947-947",
"gpu-fan" : "50",
"gpu-platform" : "1",
"gpu-memclock" : "1250",
"gpu-memdiff" : "0",
"gpu-vddc" : "0.000",
"intensity" : "17",
"temp-target" : "85",
"temp-overheat" : "95",
"temp-cutoff" : "99",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"shaders" : "0",
"thread-concurrency" : "24550",
"no-pool-disable" : true
} |
|
|
|
Guys, is this work rate and utility rate ok? Currently mining DOGE Utility rate feels a little low but hash and WU look ok (ish)... Running an R290 desperately in need of a better cooler to stop it throttling. |
|
|
|
|
Is it feasible to implement a change to a backup pool if hash rate goes below x
I use hashco.ws and it often goes down to 20 khash, I have liteguardian as my backup but it doesn't kick in presumably because there is still some activity.
Thanks,
Chris.
|
|
|
|
|
Last 2 days for me have been awful. Usually I get 0.012-0.015 a day, but struggled to get more than 0.003, perplexed and wondering if there are still issues?
|
|
|
|
I note the comment on the modify coin settings page next to BTC:
"Doesn't make much sense to be enabling this for BTC does it?! Thank moo thank moo very much"
By default on mine auto-trade was enabled, I had to manually turn this off - not sure if this makes any difference?
does it make any difference? |
|
|
|
|
Also not sure what's going on with the estimator, I have been mining all day which should net me 0.015 roughly, had to reboot my PC for a Windows update, logged back into the site a few hours later to check to move some money around and notice the estimated earnings are now only 0.003, massive reduction.
|
|
|
|
|
I note the comment on the modify coin settings page next to BTC:
"Doesn't make much sense to be enabling this for BTC does it?! Thank moo thank moo very much"
By default on mine auto-trade was enabled, I had to manually turn this off - not sure if this makes any difference?
|
|
|
|
UpAUF2EnFtbSqfnZPvrLyjLFbypEmfr27c  too late |
|
|
|
V83jh12TPDHdriftafhmRSY5GLtSwVFtJf
sent, enjoy. |
|
|
|
 no... lol |
|
|
|
|
as per op - this crypto isnt for me...
|
|
|
|
|
Definitely interested in being a BETA tester, I will not be able to sign up though until the 8th as I am away on vacations.
|
|
|
|
|
that's phenixcoin done and dusted then, another hole in one for cryptsy
|
|
|
|
Here you go people: http://lky.allpoolz.com
Port: 8080
Stratum Only
1% FeePool will open shortly after github source is released. Ohh, btw.. this will be in super-duper beta since I don't have the source ahead of time. wtf 172 mh/s means nothing look at network hash rate, wait until its released. |
|
|
|
|
Did Hazard create this for you?
|
|
|
|
OK, The new pool is ready to go, and I am ready to start moving jkc.allpoolz.com . I have corrected most of the issues with the original (unfortunately some of the fixes would have required me to shut down pool for a period of time to fix) The new address is jkc.cryptocoinmine.comALL THE COINS YOU HAVE ON jkc.allpoolz.com WILL BE PAYED OUT, EVEN IF I HAVE TO MANUALLY DO IT MYSELF!!!In the interest of a clean transfer, all of your account user information has been transferred over. However, your share and balance information has not. The front end of j kc.allpoolz.com will remain up for users to manually take out coins, of if auto-pay is set, coins will be sent out at one time. For the moment, both pools are up, but soon port 8080 on jkc.allpoolz.com will be redirected to jkc.cryptocoinmine.com. I feel this is the cleanest way to do the transfer, jkc.cryptocoinmine.com is brand new pool, except all your account and worker info is already there ready to go. Well done! Throwing 500 khash at this, will point my other cards at WDC still, hoping JKC will come good at some point in the near future, a small price lift will make a huge difference to the coins profitability and network hashrate |
|
|
|
|
Now the panic sellers have gone, hopefully we can return to the normal 0.001-0.002 trading.
|
|
|
|
If this coin derived just a slightly higher value, then it would be the coin to mine, network hash rate would increase, which would further increase prices and so on...
We need to get some momentum behind this!
How many alt coin price have increase when that have get big hash rate fast?  It depends on your motive  But I see your point! |
|
|
|
|
Show Posts
