Hello all,
I have got a rig of six Sapphire Nitro+ RX570 8GB. I have modified and flashed them with one and single bios. Now every single GPU is hashing at the rate of 28.8+ and power consumption bellow 110 watts and temperature not reaching 60c. Process clock: 1125, memory clock: 2000. Two gpu's not giving a single memory error and the other four is throwing errors but still keeping hash rates stable.
How is this possible that one and the same bios is working differently on 6 and the same type of GPU's. How to resolve memory errors? Should i try to overclock problematic cards at the lower levels?
Any suggestions?
Although the videocard of the same manufacturer and uses the same memory, the memory chips are still different. Some more successful, others less. Memory frequencies for each card individually and then install them in the rig. Although the frequency of 2000 MHz is small... |
|
|
|
Время попкорна.
Фанаты Макафи выставляют ему претензии - почему dogecoindark-XVG поехал вниз.
Он там всем наванговал 15$ - теперь мямлит что его не поняли и говорил про 0.15$.
У него в твиторе все кто продал почку обещают поднять его на вилы или подать в суд.
Бугага) То вчера idcray.com оказалось не ту ветку XVG майнил и выводы, как и торги на Йобите стопорнулись. Теперь и цена из-за этого просела. А тут еще и МакАфи ванганул) |
|
|
|
Hey everybody. I recently upgraded to a fourth GPU (1080 ti Hybrid) on my Asus Prime B350-Plus and Ryzen 7 1700, dedicated miner. I have not been able to get the fourth GPU to operate. When I have four gpus connected, the PCIe 2.0x16_2 shows this error: "Windows has stopped this device because it has reported problems (code 43)".
These are the things that I have done so far:
- checked all connections to gpus, risers, and pci slots
- plugged in the new gpu to all the different pci slots and different risers to ensure that it was working properly.
- All gpus, risers, and pci slots work with up to a three gpu configuration.
- updated the bios to 3401 version (current on ASUS website).
- Connected gpus to all different power rails on the psu (1600w evga T2).
- Updated driver for the new 1080ti (the update manager said they were the newest version, but I updated anyway)
Any thoughts?
Specify that you use for OS - HDD or SSD. If the SSD is what M.2 or SATA? Specifications: PCIeX16_2 slot shares bandwidth with PCIeX1_1 and PCIeX1_2. did you enable 4G Decoding and set pci express to gen 1 ? if you did and still doesn't work use hive os on a usb drive or something see if it brings other gpus up.
AMD dont have 4G Decoding |
|
|
|
I downloaded the HUSH wallet from the devs website and installed it. However it is showing 0 connections and will not sync. I've searched everywhere for a solution but seem to be coming up short. Anyone here have a solution by chance?
A similar question was on the forum HUSH https://forum.myhush.org/t/wallet-not-syncing/290There exactly the same breathing was given the answer about the generation of hush.conf and this helped. In general, bitcointalk has a profile topic https://bitcointalk.org/index.php?topic=2008578.880 and it is better to ask questions in it. |
|
|
|
Yesterday the site went down. Now they are back up, but claim to have magically lost 2,640,000 XVG due to a "mistake". Here is the Quote from the pool owner: im so sorry
my xvg-mg pool was mining wrong chain few hours
we are try to fix it now
please waiting a moment
we will back quickly
thx
I requested a Debit_MP (Manual Cash Out) yesterday and the Status became confirmed and transaction was completed after ~20mins, the XVG went away from my balance but on my wallet I didnt receive any. Thats now over 12h. When I try to search for the transaction hash ("468e860a1a0b3996fea3df11b96766db48d51c98075ec26df7144ed4148565ea") on a Verge explorer it says transaction could not be found. It was never send to me. But my XVG is gone on the site. AND NOW they increase the Pool fee to the double because they want to earn back what they lost BUT IT WAS THEIR MISTAKE. And they let us pay for it. Btw I dont think there was an error, I think they scammed the money since in the last month the pool became huge trafic, way more than before when nobody used this shit pool. And now they got greedy. Greed destroys people. They not only stole the XVG but also used it as an excuse to even increase the Pool fee. I am going to switch to a diffent Pool. Either I'm staying with XVG and going to this pool: http://strataspool.com/getting_started Or Im going back to DGB even tho I will be making less, I wont support scammers who scam me and this community! And I also think why on Yobit the auctions have stopped ... And here such news. Bad( The last Debit_AP transaction was conducted on 2017-12-26 13:33:05 |
|
|
|
как можно различить ICO, какой близок к успеху? или только надо выбрать тех которых ты хорошо знаешь? вот не давно присоединился к bitroad.io он это не из списка Airdrop...  А Вы твиттер их почитайте. Пишут, что за 3 дня собрали почти всю сумму. Я вот думаю как бы на фоне такого успеха баунти не отменили) |
|
|
|
Вот что мне в телеграме ответили: "Мы сейчас работаем над точной дорожной картой для всех новых функций, пока не можем ее раскрыть, но в течение нескольких недель у вас появятся интересные новости." " Наша главная цель - ускорить процесс, что очень возможно, поскольку у нас есть существующая платформа, которая может многое делать, и технически это не будет Бетта. Но это хорошая идея, мы назовем это " |
|
|
|
Hey there
I 've an msi rx 580 8gb armor graphic card. I use Claymore's v10.2 and hashing solo eth.
I download many roms which hashed 30 Mh/s or smtg(at least ppl said that). but I can not reached even 22 Mh/s.
I tried many overclock options with roms.
please help me. What sould I do?
The BIOS already with changed frequencies and power consumption? Which drivers use the blockchain or the last? |
|
|
|
|
Report on version 3.0.0:
I tested on two videocards RX480 and R9 270 - there is no speed increase, but there are no mistakes.
|
|
|
|
|
You can try this strap 777000000000000022AA1C0073626C41B0551016BA0D260B0060060004061420EA8940AA0300000 01914292EB22E3B16
Frequency 1170/2100MHz.
Remember that you do any modifications at your own risk!
|
|
|
|
|
Try this config:
-ewal 0xf981c1186b94c4af14AB007d8C3A189137aA965c
-epool coinotron.com:3344
-epsw x
-dpool Coinotron.com:3348
-dwal YOURPASCWALLET
-dpsw x
-esm 2
-mode 0
-tt 70
-dcoin pasc
Perhaps the reason is that different pools use different Ethereum Stratum mode.
-esm Ethereum Stratum mode. 0 - eth-proxy mode (for example, dwarpool.com), 1 - qtminer mode (for example, ethpool.org),
2 - miner-proxy mode (for example, coinotron.com), 3 - nicehash mode. 0 is default.
Of course on the pool, create a worker for ETH.
|
|
|
|
А что там, кстати, на счет печатного станка тезера, поломался что ли? Он же каждый день по 50-100кк печатал, а тут вдруг тишина... или печатает? у кого ссылка есть?
Последняя пачка была выпущена позавчера. http://omnichest.info/lookupadd.aspx?address=3MbYQMMmSkC3AgWkj9FMo5LsPTW1zBTwXLСегодня в Беларуси подписали Декрет «О развитии цифровой экономики». Руководство страны легализовало блокчейн, криптовалюты, майнинг, криптобиржи. Как вам такие новости?
Новости офигенные на самом деле. Для Беларуси это означает что в этом направлении теперь смогут свободно развиваться многие проекты. Новость то классная, но не понятно как всё это будет реализовано на бюрократическом уровне. Как доказать что ты получил прибыль от криптовалют, а не от торговли наркотой? Вся деятельность физических лиц связаная с криптовалютами не будет считатся предпринимательской деятельностью, а доход не будет облагаться налогом, так что да вполне вероятно, что полученные средства другим путём можно будет выдавать как заработанные с помощью крипты  С другой строны там не дураки сидят, контроль так или иначе вестись будет. Тогда должна быть инспекция, которая будет ходить и проверять наличие ферм и аптайм майнеров)) Хорошие новости! |
|
|
|
|
I think that low core voltage. I made a voltage of 956mV at a frequency of 1146MHz. I will not say anything about the memory controller voltage. I read somewhere that Claymore does not change it correctly.
HWinfo memory error does not show?
|
|
|
|
|
Show Posts
