Hi is there really no way to have Xinerama AND all GPU's active mining like here described? http://whythiserror.blogspot.co.at/2013/06/adl-detected-more-less-devices-gpus.htmlif Xinerama is on and I use 2 Monitors there is only one GPU active for mining bfgminer and cgminer says CL Platform 0 vendor: Advanced Micro Devices, Inc.
[2013-09-08 20:08:53] CL Platform 0 name: AMD Accelerated Parallel Processing
[2013-09-08 20:08:53] CL Platform 0 version: OpenCL 1.2 AMD-APP (1307.1)
[2013-09-08 20:08:53] Platform 0 devices: 1
[2013-09-08 20:08:53] 0 Cypress
[2013-09-08 20:08:53] ADL found more devices than opencl!
[2013-09-08 20:08:53] There is possibly at least one GPU that doesn't support OpenCL
[2013-09-08 20:08:53] Use the gpu map feature to reliably map OpenCL to ADL
[2013-09-08 20:08:53] WARNING: Number of OpenCL and ADL devices did not match!
[2013-09-08 20:08:53] Hardware monitoring may NOT match up with devices!
[2013-09-08 20:08:53] GPU 0 ATI Radeon HD 5800 Series hardware monitoring enabled
[2013-09-08 20:08:53] 1 GPU devices max detected if Xinerama is off two GPU's are active for mining but I have only clone desktop on both Monitors TIA |
|
|
|
is it possible that my BFL LS has this problems because airflow? 2013.09.09 [17:11] BitFORCE (ttyUSB0) ERROR: Unexpected response without command: BitForce SHA256 SC 1.0
2013.09.09 [17:11] BitFORCE (ttyUSB0) ERROR: Command timed out. Retries: 0
2013.09.09 [17:11] Probe of port /dev/ttyUSB0 failed: timeout
2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to work results poll command: BitForce SHA256 SC 1.0
2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to temperature check command: INPROCESS:1
2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to temperature check command: COUNT:16
2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to temperature check command: 283DF32FA7E2E8C4E19BFDFC0E59355142FF2A3B01C658891AD9D0743EEA14A2,B7C23A1A522DE58E1931679C,5,1,6BC1B0FE
2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to work queue flush command: 283DF32FA7E2E8C4E19BFDFC0E59355142FF2A3B01C658891AD9D0743EEA14A2,B7C23A1A522DE5981931679C,2,3,1B251CAF,28F291D5,B0A3BE86
2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to queue job pack command: 283DF32FA7E2E8C4E19BFDFC0E59355142FF2A3B01C658891AD9D0743EEA14A2,B7C23A1A522DE59D1931679C,0,2,66804588,851B4256
2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to queue job pack command: 283DF32FA7E2E8C4E19BFDFC0E59355142FF2A3B01C658891AD9D0743EEA14A2,B7C23A1A522DE59C1931679C,7,0
2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to temperature check command: 283DF32FA7E2E8C4E19BFDFC0E59355142FF2A3B01C658891AD9D0743EEA14A2,B7C23A1A522DE5A21931679C,4,0
2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to temperature check command: 283DF32FA7E2E8C4E19BFDFC0E59355142FF2A3B01C658891AD9D0743EEA14A2,B7C23A1A522DE5AC1931679C,3,1,E9C671B0
2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Command timed out. Retries: 0
2013.09.09 [17:13] Probe of port /dev/ttyUSB0 failed: timeout it stops after ~1-2 hours and is not starting automatically again (exept for starting BitMinter client manually new) (I have removed the inflow plate because with this it is much louder and stops quickier) TIA |
|
|
|
und die ist leider sowas von langsam im Aufbau  |
|
|
|
upgraded to Ubuntu 13.04 and same problem again with BFL LS that it stops after ~1-2 hours and not starting automatically again (exept for starting BitMinter client manually new) 2013.09.09 [12:52] Work rejected. Server says: Stale proof of work
2013.09.09 [12:54] BitFORCE (ttyUSB0) ERROR: Unexpected response without command: BitForce SHA256 SC 1.0
2013.09.09 [12:54] BitFORCE (ttyUSB0) ERROR: Command timed out. Retries: 0
2013.09.09 [12:54] Probe of port /dev/ttyUSB0 failed: timeout 2013.09.09 [17:11] BitFORCE (ttyUSB0) ERROR: Unexpected response without command: BitForce SHA256 SC 1.0
2013.09.09 [17:11] BitFORCE (ttyUSB0) ERROR: Command timed out. Retries: 0
2013.09.09 [17:11] Probe of port /dev/ttyUSB0 failed: timeout
2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to work results poll command: BitForce SHA256 SC 1.0
2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to temperature check command: INPROCESS:1
2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to temperature check command: COUNT:16
2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to temperature check command: 283DF32FA7E2E8C4E19BFDFC0E59355142FF2A3B01C658891AD9D0743EEA14A2,B7C23A1A522DE58E1931679C,5,1,6BC1B0FE
2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to work queue flush command: 283DF32FA7E2E8C4E19BFDFC0E59355142FF2A3B01C658891AD9D0743EEA14A2,B7C23A1A522DE5981931679C,2,3,1B251CAF,28F291D5,B0A3BE86
2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to queue job pack command: 283DF32FA7E2E8C4E19BFDFC0E59355142FF2A3B01C658891AD9D0743EEA14A2,B7C23A1A522DE59D1931679C,0,2,66804588,851B4256
2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to queue job pack command: 283DF32FA7E2E8C4E19BFDFC0E59355142FF2A3B01C658891AD9D0743EEA14A2,B7C23A1A522DE59C1931679C,7,0
2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to temperature check command: 283DF32FA7E2E8C4E19BFDFC0E59355142FF2A3B01C658891AD9D0743EEA14A2,B7C23A1A522DE5A21931679C,4,0
2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Unexpected response to temperature check command: 283DF32FA7E2E8C4E19BFDFC0E59355142FF2A3B01C658891AD9D0743EEA14A2,B7C23A1A522DE5AC1931679C,3,1,E9C671B0
2013.09.09 [17:13] BitFORCE (ttyUSB0) ERROR: Command timed out. Retries: 0
2013.09.09 [17:13] Probe of port /dev/ttyUSB0 failed: timeout |
|
|
|
I now get the error using any offset on BTCe.
here the same gekko_BTC-e/methods/realtime-candle-fetcher.js:98
throw 'Failed to load historical trades from ' + this.watcher.name;
^
Failed to load historical trades from bitcoincharts
|
|
|
|
eligius ist voll ok und führt zu ziemlich sicheren Einnahmen, wenn auch zum Teil verzögert. Nachteil kein Merged Mining mit Namecoins btcguild liefert auch solide Einküfte bei PPLNS da relativ wenig Schwankungen, aber! der Pool ist zu groß und sollte daher nicht supportet werden http://mmpool.bitparking.com/pool merged mining mit 5 weiteren Coins wobei eigentlich nur noch NMC spürbar was bringen und groupcoin und i0coin keinen Wert bieten. also mein Voting 1. bitparking2. eligius 3. bitminter +1  eligius hat mittlerweile wieder Merged Mining mit Namecoins |
|
|
|
installed/compiled the latest libmicrohttpd-0.9.29 and getting this (Ubuntu 12.04 LTS) bfgminer -V
bfgminer: error while loading shared libraries: libmicrohttpd.so.10: cannot open shared object file: No such file or directory
|
|
|
|
jetzt gerade... Over $1 million in five minutes |
|
|
|
The only thing Avalon can really do at this point is send chips AND refunds.
|
|
|
|
Prepaid Karten nimmt nicht jeder an. Kartentankstellen z.B. nicht
auch im Internet geht es nicht immer/überall (auch wenn VISA drauf steht) |
|
|
|
Hey, congrats on getting it stable. Did it show a high temperature before? What about now? no, temperature was ~62°C, now it is ~59°C |
|
|
|
hi DrHaribo I have located the reason for the error -> it is the bad thermal design of the BFL LS because it was so noisy I looked and have seen that if I remove one plate of the chassis it is not only less noise, - it runs now without any errors for half a day (before after 2 hours it was tilt..) |
|
|
|
* GitHub Updated *
make -f makefile.unix
g++ -c -O2 -msse2 -pthread -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -g -DBOOST_SPIRIT_THREADSAFE -I/home/xxx/Downloads/ecocoin/src -I/home/xxx/Downloads/ecocoin/src/obj -DUSE_UPNP=0 -DUSE_IPV6=1 -DSCRYPT_KECCAK512 -DSCRYPT_CHACHA -DSCRYPT_CHOOSE_COMPILETIME -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2 -MMD -MF obj/alert.d -o obj/alert.o alert.cpp
alert.cpp:244:1: schwerwiegender Fehler: Abhängigkeitsdatei »obj/alert.d« wird geöffnet: Datei oder Verzeichnis nicht gefunden
Kompilierung beendet.
make: *** [obj/alert.o] Fehler 1
|
|
|
|
OK It's confirmed, today I got offer from local seller (in Poland) for Avalon chips.
He got them from china in ammount of 500 pieces. He is not a bitcoin miner, he is not even aware what are these chips really designed for.
He is just regular chinese electronics reseller.
I will try to provide photo confirmation asap.
Alibaba offers are real!!
https://bitcointalk.org/index.php?topic=269950.msg3020182 |
|
|
|
Can you try running it on a computer without a bunch of block erupters hooked up? It could be that they are causing the USB instability.
ok, will try tomorrow.. |
|
|
|
Please use Branch testing. QHttp no more used on lastest beta.
Release will be available soon, but beta is stable.
ok, thx this was ok |
|
|
|
|
Show Posts
