x22i some improvement ( 1.3-1.5%) [16:55:17] INFO - GPU0 GTX 1070 Ti : 7026KH/s (Avr 6999KH/s) : 108,4KH/W : T=55C Fan=30%
[16:55:17] INFO - GPU1 GTX 1070 Ti : 6862KH/s (Avr 6789KH/s) : 111,7KH/W : T=54C Fan=28%
[16:55:17] INFO - GPU2 GTX 1070 Ti : 6900KH/s (Avr 6932KH/s) : 111,0KH/W : T=55C Fan=31%
[16:55:17] INFO - GPU3 GTX 1070 Ti : 6368KH/s (Avr 6384KH/s) : 108,9KH/W : T=54C Fan=26%
[16:55:17] INFO - GPU4 GTX 1070 Ti : 6862KH/s (Avr 6863KH/s) : 111,1KH/W : T=56C Fan=33%
[16:55:17] INFO - GPU5 GTX 1070 Ti : 7070KH/s (Avr 7069KH/s) : 110,9KH/W : T=57C Fan=34%
voltage 0.6375 -600 memory +400 clock (with nvinspector) Edit : Newest T-Rex is now faster than CryptoDredge Hi, what result frequencies you got with this settings (core clock)? Power consumtion from the wall? It seems about 1300 on core and 60-65W from card? |
|
|
|
|
At the weekend there was little time for experimentation. I installed Linux and downloaded the timredminer and realized that I have no idea how to start it. Therefore, I need advice.
|
|
|
|
|
Hi, now testing cryptodredge with my 1060 3Gb. I got a lot of rejected shares. Reason: low difficulty share. So whats wrong, OC settings or something else?
|
|
|
|
|
Using t-rex 0.8.0 cuda 9.2, 1060 cards, x16r, windows 7 x64, driver 416.94. My average hashrate on pool is 10.5 H/s per card. It seems 0.5 H/s more than prev version, good job. Does it make sense to try cuda 10 or it is more suitable for the 20xx series?
|
|
|
|
Я этот закуп еще с лета переношу на сентябрь, потом на октябрь, на ноябрь и тд. Он привязан у меня к четкому паттерну: я жду когда начнется кризис среди широких слоев и инвесторы начнут скидывать самые рисковые активы. Крипта полетит первым делом. Когда будут готовы за любые деньги выводить. Вот это. Я писал еще в том году, что на рынке у 80% игроков сверхприбыли и кидал не раз статью с форклога, а надо мной смеялись (кто найдет пост со статьей, скину оставшиеся мериты, сам давно пытаюсь найти).
Вот не в обиду, но фантастический сценарий: 1. Все решат продать и появятся объемы. Вопрос: если ВСЕ решат продать, то кто-то ведь купит? Если решит кит с 100к битка продать все, то кто-то это все ведь должен купить, правда? А если ВСЕ будут только продавать убегая, то логично что покупать никто не будет  2. Следуя из пункта 1, если кит с 100к бтц продаст эти 100к, то кто-то (пусть и дешево) эти 100к купит, и это будет совсем не голожопый народ, так как народ всегда убегает первым, поэтому и голожопый 3. да, опустят цену до 500 баксов, и из майнеров только Венесуэла и останется. (считали недавно, для Украины себестоимость на самом новом оборудовании - 1250 баксов за бит). И придется Цитадель в Венесуэле строить, пить нефть и кушать коммунизм. (ну или что-то около того) При текущей сложности, если посчитать битмайновский эс15, приняв цену за э/э 0,06. выходит, что нужно потратить только 2100+ долларов на электроэнергию для добычи одного биткоина. То ли у вас более энергоэффективное оборудование, то ли другие цены, но когда страниц двадцать назад там считали Битфури Б8, я тоже удивился цифрам. Кстати, интересный момент сейчас, хешрейт сети значительно упал по прошествии месяца и сложность, соответсвенно упала... https://www.blockchain.com/ru/charts/difficulty?timespan=180days. Вот думал, так же, имея большие мощности, можно попеременно майнить несколько криптовалют, переключаясь, соответственно, когда сложность сети пересчитывается. |
|
|
|
|
Hi guys! Is there are any recommendations for driver version? Using t-rex 0.8.0 cuda 9.2, 1060 cards, x16r, windows 7 x64. Thank you.
|
|
|
|
Hi, here is temredminer 0.17.0 output: GPU 0 - cnv8: 680.9 h/s, avg 680.0 h/s, pool 779.6 h/s a:69 r:0 hw:2
card rx470 with some moddede bios, intensity 4-4
So hw:2 its good/bad and what it means? Its hradware errors? Need to downclock?
Thank you.
Hi! Those would be found shares rejected by cpu verification, so yes, hardware errors. Tweaking clocks would be the advice. Also, 680 h/s on a 470 is quite low? Even if it's a 4GB driving monitors, have you tried configs such as 7+7, 6+6? I thought before there was a problem in the monitor and connected the monitor to another card, but now the afterburner does not allow to change the frequensies, and configs more agressive than 4-4 still crashes my driver. Ill try to downklock card and report than. P.S. Why afterburner disable the frequency control, when i add gt220 card? Now i flash lower clocks on the memory (from 1900 to 1875) and still config more than 4-4 crashes driver. May be its a windows 7 problem? It could def be a Win 7 problem, we don’t test/support Win 7, it seems to be working for some though. Аt least the issue with hw errors was resolved:GPU 0 - cnv8: 670.2 h/s, avg 669.9 h/s, pool 619.3 h/s a:570 r:0 hw:0. Want to try this miner with linux, than report. |
|
|
|
Hi, here is temredminer 0.17.0 output: GPU 0 - cnv8: 680.9 h/s, avg 680.0 h/s, pool 779.6 h/s a:69 r:0 hw:2
card rx470 with some moddede bios, intensity 4-4
So hw:2 its good/bad and what it means? Its hradware errors? Need to downclock?
Thank you.
Hi! Those would be found shares rejected by cpu verification, so yes, hardware errors. Tweaking clocks would be the advice. Also, 680 h/s on a 470 is quite low? Even if it's a 4GB driving monitors, have you tried configs such as 7+7, 6+6? I thought before there was a problem in the monitor and connected the monitor to another card, but now the afterburner does not allow to change the frequensies, and configs more agressive than 4-4 still crashes my driver. Ill try to downklock card and report than. P.S. Why afterburner disable the frequency control, when i add gt220 card? Now i flash lower clocks on the memory (from 1900 to 1875) and still config more than 4-4 crashes driver. May be its a windows 7 problem? |
|
|
|
В том то и проблема, что разные цифры. Я читал тоже нормальные раскладки, по цене майнинга (основано на стоимости электричества). И при нынешнем хэшрейте большинство стран не рентабельны
Даже для неебацца дорогого украинского электричества (если совсем не пиздить и даже не откручивать счетчик): Например BitFury B8 Стоит примерно 10к баксов Электричество - 1,68/Квт при потреблении свыше 3600 Квт/мес Жрет он нихуя не мало: 4608х1,68=7741 или примерно 250$. Приносит он 0.2 втс/мес по Cryptocompare (примерно, точно считать лень) Путем нехитрых манипуляций получаем, что чтобы гасить электричество и выйти на рентабельность, тебе надо чтобы биток стоил 1250$. Удивился вашим результатам и пересчитал сам, выходит 4800+ долл за условно добытый биткоин(только Э/Э), при мощности 50 Тх, потреблении 6.4 кВт/ч. При розетке 0.064 добыча уже примерно "вхолостую" происходит... https://www.cryptocompare.com/mining/calculator/btc?HashingPower=50&HashingUnit=TH%2Fs&PowerConsumption=6400&CostPerkWh=0.064&MiningPoolFee=1 |
|
|
|
Just try new version of t-rex 0.7.4 on my 1060 3Gb with algo x16r. Core clock 2025, memory in stock 8,5-15 M/h from card.
After couple days of using t-rex 0.7.4 can report hashrate 10-11 MH/s at the pool side on x16r, 1060 3gb, settings in prev post. |
|
|
|
Hi, here is temredminer 0.17.0 output: GPU 0 - cnv8: 680.9 h/s, avg 680.0 h/s, pool 779.6 h/s a:69 r:0 hw:2
card rx470 with some moddede bios, intensity 4-4
So hw:2 its good/bad and what it means? Its hradware errors? Need to downclock?
Thank you.
Hi! Those would be found shares rejected by cpu verification, so yes, hardware errors. Tweaking clocks would be the advice. Also, 680 h/s on a 470 is quite low? Even if it's a 4GB driving monitors, have you tried configs such as 7+7, 6+6? I thought before there was a problem in the monitor and connected the monitor to another card, but now the afterburner does not allow to change the frequensies, and configs more agressive than 4-4 still crashes my driver. Ill try to downklock card and report than. P.S. Why afterburner disable the frequency control, when i add gt220 card? |
|
|
|
distinguished developer
one question
do you still support old pitcairn video cards ?
After the test of your latest version 1.7.0 I am at a loss?
srb 1.6.9 pitcairn 370 2 gb stelite v4 --- 485h / s
srb 1.7.0 ---- 226h / s
total failure
Hi i got less hashes with 1.7.0 on my tahiti too. Can you share your 1.6.9 miner settings for pitcairn? Thank you. Need more info, like is it stellite only or EVERY algo? same settings? what have you tried beside running new version with old config ? I dont have every possible gpu to try out when coding, sometimes what pushes one card, takes off another, so dont be immediately mad bros  Absolutely no complaints, just results. In my case, for tahiti the most productive version is still 1.6.8, 1.6.9 is a little slower, 1.7.0 much slower. ( same settings, algo v8) which card specifically, and what was the hashrate on 1.6.8 and what it is on 1.7.0 ? I want to try to fix this issue. Card is 7970(tahiti), clocks 1125/1900, win 7/64, driver 18.6.1, algo v8 Config: "intensity" : 58, "worksize" : 16, "threads" : 1 srbminer 1.6.8 hashrate 530, srbminer 1.7.0 hashrate 265, (fragments 4, aes 0 - auto settings) |
|
|
|
|
Hi, here is temredminer 0.17.0 output: GPU 0 - cnv8: 680.9 h/s, avg 680.0 h/s, pool 779.6 h/s a:69 r:0 hw:2
card rx470 with some moddede bios, intensity 4-4
So hw:2 its good/bad and what it means? Its hradware errors? Need to downclock?
Thank you.
|
|
|
|
|
Run wild rig multi 0.12.9 beta on my rx470, algo x16r stable on 7,5 M/h with recommended settings --opencl-threads 3 --opencl-launch 18x128
|
|
|
|
|
Just try new version of t-rex 0.7.4 on my 1060 3Gb with algo x16r. Core clock 2025, memory in stock 8,5-15 M/h from card.
|
|
|
|
distinguished developer
one question
do you still support old pitcairn video cards ?
After the test of your latest version 1.7.0 I am at a loss?
srb 1.6.9 pitcairn 370 2 gb stelite v4 --- 485h / s
srb 1.7.0 ---- 226h / s
total failure
Hi i got less hashes with 1.7.0 on my tahiti too. Can you share your 1.6.9 miner settings for pitcairn? Thank you. Need more info, like is it stellite only or EVERY algo? same settings? what have you tried beside running new version with old config ? I dont have every possible gpu to try out when coding, sometimes what pushes one card, takes off another, so dont be immediately mad bros Absolutely no complaints, just results. In my case, for tahiti the most productive version is still 1.6.8, 1.6.9 is a little slower, 1.7.0 much slower. ( same settings, algo v8) |
|
|
|
distinguished developer
one question
do you still support old pitcairn video cards ?
After the test of your latest version 1.7.0 I am at a loss?
srb 1.6.9 pitcairn 370 2 gb stelite v4 --- 485h / s
srb 1.7.0 ---- 226h / s
total failure
Hi i got less hashes with 1.7.0 on my tahiti too. Can you share your 1.6.9 miner settings for pitcairn? Thank you. |
|
|
|
|
Can report that there is no changes in perfomance in cryptonight v8 for gtx1060 till version 0.9.6. still have almost 560H/s from card with cryptodredge 0.1.10.
|
|
|
|
|
Show Posts
