|
Bojcha
|
 |
November 11, 2018, 08:16:11 PM |
|
What are the settings for rx570 4Gb for v1.7.0 and v8?
I:58 T:2 W:16 F:4 |
|
|
|
|
|
|
|
|
|
"In a nutshell, the network works like a distributed
timestamp server, stamping the first transaction to spend a coin. It
takes advantage of the nature of information being easy to spread but
hard to stifle." -- Satoshi
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
tvukoman
Jr. Member
 Offline
Activity: 69
Merit: 5
|
|
November 11, 2018, 08:34:42 PM |
|
What are the settings for rx570 4Gb for v1.7.0 and v8?
I:58 T:2 W:16 F:4 And what is for heavy / bittube2 algo? Also, did someone test fragments and bralock, if I understand correctly fragments is more important parameter to tune? Interested in settings for bittube2 algo for RX 570 4GB, Vega 56, Vega 64 "fragments" : 0,1,2,4,8,16,32,64 or 128. It can boost your hashrate if you find the right value for your GPU "bralock": 1-256, parameter to tune, it *may* add some extra hash, it can differ between algos |
|
|
|
|
bucah
Newbie
Offline
Activity: 15
Merit: 0
|
|
November 11, 2018, 10:38:48 PM |
|
Hi dok,
I would appreciate if you could add 'reported hashrate" just like Jce.
Thanks
|
|
|
|
|
ili_kai
Newbie
Offline
Activity: 1
Merit: 0
|
|
November 12, 2018, 12:34:52 AM |
|
HELLO !!! I use the 584 and 574 amd cards and have some cn8 hash improvements about 10 hs per card! :  ; D nice! but I also have some strange explorer behaviors when I click on SRBMiner-CN.exe to copy/past it - I get laggin explorer and crashes it about 1 minute later. Is this a miner mistake or a problem on my part: - [ 1.6.9 and 1.6.8 have no problems  I excluded SRBMiner-CN.exe from my antivirus but it did not help. Antivirus also recognized one more danger than 1.6.9-1.6.8 |
|
|
|
|
MingMining
Member
Offline
Activity: 202
Merit: 10
Eloncoin.org - Mars, here we come!
|
|
November 12, 2018, 02:44:30 AM
Last edit: November 12, 2018, 03:35:49 AM by MingMining |
|
V1.6.9 vs V1.7.0 V8 comparison on my 7x Vega 56's
Vega #1 1891 1910 + 19 H/s
Vega #2 1871 1893 + 22 H/s
Vega #3 1884 1904 + 20 H/s
Vega #4 1852 1869 + 17 H/s
Vega #5 1844 1865 + 21 H/s
Vega #6 1855 1874 + 19 H/s
Vega #7 1840 1863 + 23 H/s
---------------------------------
Totals 13037 13178 +141 H/s or about +20 H/s for each Vega 56
Thx doc !~!
Did you bios mod your cards? Did you use soft power play table? XMR-stak did not work anymore for me so I am trying to use srbminer now. Any link or pointer would be appreciated. |
|
|
|
djim123
Newbie
Offline
Activity: 5
Merit: 0
|
|
November 12, 2018, 06:34:16 AM |
|
V1.6.9 vs V1.7.0 V8 comparison on my 7x Vega 56's
Vega #1 1891 1910 + 19 H/s
Vega #2 1871 1893 + 22 H/s
Vega #3 1884 1904 + 20 H/s
Vega #4 1852 1869 + 17 H/s
Vega #5 1844 1865 + 21 H/s
Vega #6 1855 1874 + 19 H/s
Vega #7 1840 1863 + 23 H/s
---------------------------------
Totals 13037 13178 +141 H/s or about +20 H/s for each Vega 56
Thx doc !~!
Can You share ,settings and configuration,please. All settings for SRBMiner are the same for each Vega 56 and done in the V8 config file: intensity: 112 worksize: 16 threads: 2 Vega 56's #1, #2 and #3 are in one system that has Radeon Adrenalin Edition 18.8.1 installed which actually produces high hash rates than the recommended Radeon Adrenalin Edition 18.5.1 installed in the system with Vega 56's #4, #5, #6 and #7. These two systems are on a Biostar H81A motherboard and are using a single HP 1200 Watt Server Power Supply (87% Efficient) with a 17x 6-pin Breakout board. The motherboard is powered by an 180 watt Pico PSU that gets it's 12 volt input from a 6-pin connector on the breakout board. I like my systems only running on a single power supply. System one is hashing on an i3-4340 at 73 H/s and system two is hashing on an i5-4570 at 195 H/s. All power measurements are done at the wall with a Power Usage Monitor. That way the entire system is measured (motherboard, processor, memory, ssd) and the Vega 56's and it is the real power not the incomplete ones that only look at the software measurements like HWINFO which does not consider the inefficiencies of power supply and internal power conversion circuits or the rest of the system. Realize that V8 is much more power hungry than V7 was. I do not use soft power play tables as I have found that V7 and V8 basically run between P6 & P7 states on the core and P3 on memory. The Vega 56's are reference designs of various vendors with stock BIOS. So my Wattman settings for six of the Vega 56's are: Core: Min P6 1212 MHz @ 905 mv Max P7 1452 MHz @ 925 mv Memory: Min/Max P3 935 MHz @ 900 mv Fans: Min: 2700 Target: 4900 Temperature: Max: 75 Target: 65 I do have one problematic Vega 56 that I have to run at: Core: Min P6 1212 MHz @ 960 mv Max P7 1452 MHz @ 985 mv Memory: Min/Max P3 900 MHz @ 950 mv With all that out of the way here are the final numbers: System one 3x Vega 56's: Vega #1 1911 H/s Vega #2 1893 H/s Vega #3 1904 H/s -------------------- Total Vega's 5708 H/s i3-4340 adds 73 H/s ------------------------- System Total: 5781 H/s Total Power at the wall: 675 watts System two 4x Vega 56's: Vega #4 1869 H/s Vega #5 1865 H/s Vega #6 1874 H/s Vega #7 1863 H/s -------------------- Total Vega's 7471 H/s i5-4570 adds 195 H/s ------------------------- System Total: 7666 H/s Total Power at the wall: 898 watts Thank You very much ,Sir |
|
|
|
|
jazz1984
Jr. Member
Offline
Activity: 392
Merit: 5
|
|
November 12, 2018, 09:43:58 AM
Last edit: November 12, 2018, 09:55:58 AM by jazz1984 |
|
distinguished developer
one question
do you still support old pitcairn video cards ?
After the test of your latest version 1.7.0 I am at a loss?
srb 1.6.9 pitcairn 370 2 gb stelite v4 --- 485h / s
srb 1.7.0 ---- 226h / s
total failure
Hi i got less hashes with 1.7.0 on my tahiti too. Can you share your 1.6.9 miner settings for pitcairn? Thank you. |
|
|
|
|
|
doktor83 (OP)
|
|
November 12, 2018, 10:14:21 AM |
|
distinguished developer
one question
do you still support old pitcairn video cards ?
After the test of your latest version 1.7.0 I am at a loss?
srb 1.6.9 pitcairn 370 2 gb stelite v4 --- 485h / s
srb 1.7.0 ---- 226h / s
total failure
Hi i got less hashes with 1.7.0 on my tahiti too. Can you share your 1.6.9 miner settings for pitcairn? Thank you. Need more info, like is it stellite only or EVERY algo? same settings? what have you tried beside running new version with old config ? I dont have every possible gpu to try out when coding, sometimes what pushes one card, takes off another, so dont be immediately mad bros  |
|
|
|
KhorneFlake
Newbie
Offline
Activity: 27
Merit: 0
|
|
November 12, 2018, 10:35:54 AM |
|
I just noticed that the nanopool linked new Finminer,, so I gave it a try. It sets up easy, but in the end I'm getting the same overall result. While Srbminer gives 1700h/s on one GPU and 1000 or less on the other, in Finminer both are around 1300h/s. Well, I guess that's it, eh?
|
|
|
|
|
jimmyD30
Jr. Member
Offline
Activity: 64
Merit: 1
|
|
November 12, 2018, 10:44:51 AM |
|
My Vega 64 gained 12H/s vs 1.6.9 on v8. Stable at 2134H/s, power consumption remained the same.
Nice hash rate, what’s your miner settings? Did you modify your mem clocks? |
|
|
|
|
jazz1984
Jr. Member
Offline
Activity: 392
Merit: 5
|
|
November 12, 2018, 10:50:35 AM |
|
distinguished developer
one question
do you still support old pitcairn video cards ?
After the test of your latest version 1.7.0 I am at a loss?
srb 1.6.9 pitcairn 370 2 gb stelite v4 --- 485h / s
srb 1.7.0 ---- 226h / s
total failure
Hi i got less hashes with 1.7.0 on my tahiti too. Can you share your 1.6.9 miner settings for pitcairn? Thank you. Need more info, like is it stellite only or EVERY algo? same settings? what have you tried beside running new version with old config ? I dont have every possible gpu to try out when coding, sometimes what pushes one card, takes off another, so dont be immediately mad bros Absolutely no complaints, just results. In my case, for tahiti the most productive version is still 1.6.8, 1.6.9 is a little slower, 1.7.0 much slower. ( same settings, algo v8) |
|
|
|
|
|
doktor83 (OP)
|
|
November 12, 2018, 11:10:37 AM |
|
distinguished developer
one question
do you still support old pitcairn video cards ?
After the test of your latest version 1.7.0 I am at a loss?
srb 1.6.9 pitcairn 370 2 gb stelite v4 --- 485h / s
srb 1.7.0 ---- 226h / s
total failure
Hi i got less hashes with 1.7.0 on my tahiti too. Can you share your 1.6.9 miner settings for pitcairn? Thank you. Need more info, like is it stellite only or EVERY algo? same settings? what have you tried beside running new version with old config ? I dont have every possible gpu to try out when coding, sometimes what pushes one card, takes off another, so dont be immediately mad bros Absolutely no complaints, just results. In my case, for tahiti the most productive version is still 1.6.8, 1.6.9 is a little slower, 1.7.0 much slower. ( same settings, algo v8) which card specifically, and what was the hashrate on 1.6.8 and what it is on 1.7.0 ? I want to try to fix this issue. |
|
|
|
chschlumpf
Newbie
Offline
Activity: 24
Merit: 0
|
|
November 12, 2018, 12:16:51 PM |
|
Hello
I have a problem with my VEGA miner since Monero V8. With v7 all my 8 Cards where running properly. But since V8, if only running one card, everything is good but as soon as I activate a second one, i get kernel power 41 and the rig reset.
I already tested the ram, the disk and reinstalled the complete Windows with no change. Also changed PSU but no help
I have ASrock BTC+ Pro
8GB RAM
Sapphire Vega64
Driver 18.5.2, HBCC of, Crossfire disabled
Win10
Any idea? Thanks for helping.
|
|
|
|
|
|
doktor83 (OP)
|
|
November 12, 2018, 12:49:14 PM |
|
Hello
I have a problem with my VEGA miner since Monero V8. With v7 all my 8 Cards where running properly. But since V8, if only running one card, everything is good but as soon as I activate a second one, i get kernel power 41 and the rig reset.
I already tested the ram, the disk and reinstalled the complete Windows with no change. Also changed PSU but no help
I have ASrock BTC+ Pro
8GB RAM
Sapphire Vega64
Driver 18.5.2, HBCC of, Crossfire disabled
Win10
Any idea? Thanks for helping.
are you sure your psu has enough juice? V8 needs more power than V7 |
|
|
|
deimo
Newbie
Offline
Activity: 13
Merit: 0
|
|
November 12, 2018, 12:52:44 PM |
|
Now testing:
8x RX580 8GB
cclock 1250, mclock 2150, cvddc 910, mvddc 910
drivers 18.3.2
miner 1.7.0
algo Haven
intensity 58
worksize 16
thread 2
fragments 8
Hashrate 1152
before on 1.6.7 with intensity 58 ... hashrate 1120
looking stable for now
|
|
|
|
|
Uaciuganadu
Newbie
Offline
Activity: 39
Merit: 0
|
|
November 12, 2018, 01:10:25 PM |
|
i am more interested in your pools file, have you defined a 'cryptonight_type' for the monero ocean pool?
{
"pools" :
[
{
"pool" : "gulf.moneroocean.stream:10064",
"wallet" : "someaddress",
"password" : "MinerSRBAuto:someemail@yahoo.com"
},
{
"pool" : "gulf.moneroocean.stream:10064",
"wallet" : "someaddress",
"password" : "MinerSRBAuto:someemail@yahoo.com"
}
]
}OK, so no 'cryptonight_type' set here for MO. That's good. Maybe you could try dropping the --forcedshutdown, and let the miner release the gpu resources before restarting, let's see is that going to help. Same issue even without the --forcedshutdown : [2018-11-11 14:06:36] miner_result: Sending user result to pool
[2018-11-11 14:06:36] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"3e1c2dcc-ce42-4712-b638-31a9485ce557","job_id":"wq6pDg+25VtBo7gaXQa7CebyLY0a","nonce":"8f9a5855","result":"a00c81d8d7272917d59e28d93a05495df4b64261aa242e27ff2a013895260000","algo":"cn/2"}}
[2018-11-11 14:06:36] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2018-11-11 14:06:36] miner_result: Pool accepted result 0x00002695
[2018-11-11 14:06:59] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"0909e4b6a0df05cfe653a87512bb81ca829c8902bc3211f297bdd0ea74ebebc645a63aa77926d500000000c4c2b3b1fd2b60fec3ebd2e0f9f991eb163dddb2842121cb1dad917c190899df0a","algo":"cn/2","variant":"2","job_id":"2OiAvtwB6oSaye9aWtZV+1XvRKEw","target":"c55d0000","id":"3e1c2dcc-ce42-4712-b638-31a9485ce557"}}
[2018-11-11 14:06:59] pool_have_job: Pool sent a new job (ID: 2OiAvtwB6oSaye9aWtZV+1XvRKEw) [normalv8]
[2018-11-11 14:07:10] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"0909eeb6a0df05d642cbd7021a28f075cbe5efb758164cd17afbc7f7c616947f8272adcbea6289000000001e01c1da1415b9933a5eab5aeb4df30ec126c136aafae218625dca2178b5b6a004","algo":"cn/2","variant":"2","job_id":"0Qop3NIK9e9KEv2Y6evPw9t5oEMi","target":"525e0000","id":"3e1c2dcc-ce42-4712-b638-31a9485ce557"}}
[2018-11-11 14:07:46] hashrate: GPU0: 898 H/s [BUS:6]
[2018-11-11 14:07:46] hashrate: GPU1: 2071 H/s [BUS:9]
[2018-11-11 14:07:46] hashrate: GPU2: 2033 H/s [BUS:3]
[2018-11-11 14:07:46] hashrate: Total: 5002 H/s
[2018-11-11 14:08:01] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"0303bfb6a0df05ca2eca4f2aa7f0f671c084d71395005494165d48195beaac7e8056898e470e6800000000b565223ce7209f0ea3df853fd1da74048ec03ef67d8e7475225c0195001bd44d02","algo":"cn-heavy/xhv","variant":"xhv","job_id":"/AMlUbG+Z2/14tLhLr+uc35Gyp0Q","target":"525e0000","id":"3e1c2dcc-ce42-4712-b638-31a9485ce557"}}
[2018-11-11 14:08:01] algo_switch: Pool requested algo switch to [haven]
[2018-11-11 14:08:06] ocl_release: Device BUS_ID6 thread0 resources released
[2018-11-11 14:08:06] ocl_release: Device BUS_ID6 thread1 resources released
[2018-11-11 14:08:06] ocl_release: Device BUS_ID9 thread2 resources released
[2018-11-11 14:08:06] ocl_release: Device BUS_ID9 thread3 resources released
[2018-11-11 14:08:06] ocl_release: Device BUS_ID3 thread4 resources released
[2018-11-11 14:08:06] ocl_release: Device BUS_ID3 thread5 resources released
[2018-11-11 14:08:06] Restarting miner with haven algo
[2018-11-11 14:08:07] Miner version: 1.7.0
[2018-11-11 14:08:07] Windows version: 10.0 build 16299
[2018-11-11 14:08:07] Video driver version: 24.20.11021.1000
[2018-11-11 14:08:08] AMD Platform ID: 1
[2018-11-11 14:08:08] AMD platform FOUND
[2018-11-11 14:08:08] Found 3 AMD devices
[2018-11-11 14:08:08] CPU AES-NI: TRUE
[2018-11-11 14:08:08] GPU0: Radeon RX 580 Series [ellesmere] [8192 MB][I: 56.0][W: 8][T: 2][F: 0][A: 0][BUS: 6]
[2018-11-11 14:08:08] GPU1: Radeon RX Vega [gfx900] [8176 MB][I: 62.0][W: 8][T: 2][F: 1][A: 0][BUS: 9]
[2018-11-11 14:08:08] GPU2: Radeon RX Vega [gfx900] [8176 MB][I: 62.0][W: 8][T: 2][F: 1][A: 0][BUS: 3]
[2018-11-11 14:08:08] ADL is enabled
[2018-11-11 14:08:08] Algo switching mode enabled
[2018-11-11 14:08:08] Algo switch minimum time : 60 seconds
[2018-11-11 14:08:08] Cryptonight Haven mode enabled
[2018-11-11 14:08:08] Startup monitor disabled!!
[2018-11-11 14:08:08] Watchdog is in GPU disable mode
[2018-11-11 14:08:08] Starting init of mining threads
[2018-11-11 14:08:08] Created OCL context
[2018-11-11 14:08:08] Using kernel 1 for DeviceID 0 (Thread 0)
[2018-11-11 14:08:08] Using AES 0 for DeviceID 0 (Thread 0)
[2018-11-11 14:08:09] Created OCL command queue for DeviceID 0 (Thread 0)
[2018-11-11 14:08:09] Created OCL input buffer for DeviceID 0 (Thread 0)
[2018-11-11 14:08:09] Created OCL output buffer for DeviceID 0 (Thread 0)
[2018-11-11 14:08:09] Loading haven kernel for DEVICE BUS_ID[6] ...
[2018-11-11 14:08:09] ctx->Program for DeviceID 0 (Thread 0) loaded
[2018-11-11 14:08:09] Using kernel 1 for DeviceID 0 (Thread 1)
[2018-11-11 14:08:09] Using AES 0 for DeviceID 0 (Thread 1)
[2018-11-11 14:08:09] Created OCL command queue for DeviceID 0 (Thread 1)
[2018-11-11 14:08:09] Created OCL input buffer for DeviceID 0 (Thread 1)
[2018-11-11 14:08:09] Created OCL output buffer for DeviceID 0 (Thread 1)
[2018-11-11 14:08:09] Loading haven kernel for DEVICE BUS_ID[6] ...
[2018-11-11 14:08:09] ctx->Program for DeviceID 0 (Thread 1) loaded
[2018-11-11 14:08:09] Using kernel 1 for DeviceID 1 (Thread 2)
[2018-11-11 14:08:09] Using AES 0 for DeviceID 1 (Thread 2)
[2018-11-11 14:08:09] Created OCL command queue for DeviceID 1 (Thread 2)
[2018-11-11 14:08:09] Created OCL input buffer for DeviceID 1 (Thread 2)
[2018-11-11 14:08:09] Created OCL output buffer for DeviceID 1 (Thread 2)
[2018-11-11 14:08:09] Loading haven kernel for DEVICE BUS_ID[9] ...
[2018-11-11 14:08:09] ctx->Program for DeviceID 1 (Thread 2) loaded
[2018-11-11 14:08:09] Using kernel 1 for DeviceID 1 (Thread 3)
[2018-11-11 14:08:09] Using AES 0 for DeviceID 1 (Thread 3)
[2018-11-11 14:08:09] Created OCL command queue for DeviceID 1 (Thread 3)
[2018-11-11 14:08:09] Created OCL input buffer for DeviceID 1 (Thread 3)
[2018-11-11 14:08:09] Created OCL output buffer for DeviceID 1 (Thread 3)
[2018-11-11 14:08:09] Loading haven kernel for DEVICE BUS_ID[9] ...
[2018-11-11 14:08:09] ctx->Program for DeviceID 1 (Thread 3) loaded
[2018-11-11 14:08:09] Using kernel 1 for DeviceID 2 (Thread 4)
[2018-11-11 14:08:09] Using AES 0 for DeviceID 2 (Thread 4)
[2018-11-11 14:08:09] Created OCL command queue for DeviceID 2 (Thread 4)
[2018-11-11 14:08:09] Created OCL input buffer for DeviceID 2 (Thread 4)
[2018-11-11 14:08:09] Created OCL output buffer for DeviceID 2 (Thread 4)
[2018-11-11 14:08:09] Loading haven kernel for DEVICE BUS_ID[3] ...
[2018-11-11 14:08:09] ctx->Program for DeviceID 2 (Thread 4) loaded
[2018-11-11 14:08:09] Using kernel 1 for DeviceID 2 (Thread 5)
[2018-11-11 14:08:09] Using AES 0 for DeviceID 2 (Thread 5)
[2018-11-11 14:08:10] Created OCL command queue for DeviceID 2 (Thread 5)
[2018-11-11 14:08:10] Created OCL input buffer for DeviceID 2 (Thread 5)
[2018-11-11 14:08:10] Created OCL output buffer for DeviceID 2 (Thread 5)
[2018-11-11 14:08:10] Loading haven kernel for DEVICE BUS_ID[3] ...
[2018-11-11 14:08:10] ctx->Program for DeviceID 2 (Thread 5) loaded
Here is another example: [2018-11-11 21:30:57] pool_have_job: Pool sent a new job (ID: C7rG/ktMelBnqecGjwZ4B7IHWrYI) [heavy]
[2018-11-11 21:31:07] hashrate: GPU0: 862 H/s [BUS:6]
[2018-11-11 21:31:07] hashrate: GPU1: 1824 H/s [BUS:9]
[2018-11-11 21:31:07] hashrate: GPU2: 1839 H/s [BUS:3]
[2018-11-11 21:31:07] hashrate: Total: 4525 H/s
[2018-11-11 21:31:14] miner_result: Sending user result to pool
[2018-11-11 21:31:14] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"b4174d6c-8e0a-4501-88e6-3b23be0bf002","job_id":"C7rG/ktMelBnqecGjwZ4B7IHWrYI","nonce":"bd895555","result":"a1ac490f1fa789d050cac33f9f69737e8b0f98056e95062cb08fb3abe68f0000","algo":"cn-heavy/0"}}
[2018-11-11 21:31:14] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2018-11-11 21:31:14] miner_result: Pool accepted result 0x00008FE6
[2018-11-11 21:31:22] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"0909f486a2df052672f4b8497a74004740f17edc88cc2060eee8b8e05ae44d8628ec4ba61f255c0000000054e994d89e12ef7a2bf0163bba167f28289d312a3cb41bc06a96450822fd7e3901","algo":"cn-heavy/0","variant":"0","job_id":"GwH9wLBXtga3biaCDI5jPglYJJjf","target":"715e0000","id":"b4174d6c-8e0a-4501-88e6-3b23be0bf002"}}
[2018-11-11 21:31:22] pool_have_job: Pool sent a new job (ID: GwH9wLBXtga3biaCDI5jPglYJJjf) [heavy]
[2018-11-11 21:31:32] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"09099787a2df05a737f3dffb57b3533acf95d6f664f9adc68e93dee936750489f1542def83d93d00000000fe9dd9dbc25cbcb81754c4c4d9a96bf16b879121dcd4d6230557a17768ecbcae02","algo":"cn-heavy/0","variant":"0","job_id":"0LgUbPmJKHDKrbAbzGAf7zLUYGyP","target":"715e0000","id":"b4174d6c-8e0a-4501-88e6-3b23be0bf002"}}
[2018-11-11 21:31:32] pool_have_job: Pool sent a new job (ID: 0LgUbPmJKHDKrbAbzGAf7zLUYGyP) [heavy]
[2018-11-11 21:32:08] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"0303f485a2df0503eae94e64af7b34bf11c6026c9af59511333a7e972039caaa5055cd05b3a5c200000000551b1e9077a8e4e52ced040f69bcb5f0abab07f336942460114aaabfcc229afe03","algo":"cn-heavy/xhv","variant":"xhv","job_id":"9mrvdpzan44ClfsiWDkxy2gNwsyx","target":"715e0000","id":"b4174d6c-8e0a-4501-88e6-3b23be0bf002"}}
[2018-11-11 21:32:30] algo_switch: Pool requested algo switch to [haven]
[2018-11-11 21:32:34] ocl_release: Device BUS_ID6 thread0 resources released
[2018-11-11 21:32:34] ocl_release: Device BUS_ID6 thread1 resources released
[2018-11-11 21:32:34] ocl_release: Device BUS_ID9 thread2 resources released
[2018-11-11 21:32:34] ocl_release: Device BUS_ID9 thread3 resources released
[2018-11-11 21:32:34] ocl_release: Device BUS_ID3 thread4 resources released
[2018-11-11 21:32:34] ocl_release: Device BUS_ID3 thread5 resources released
[2018-11-11 21:32:34] Restarting miner with haven algo
[2018-11-11 21:32:35] Miner version: 1.7.0
[2018-11-11 21:32:35] Windows version: 10.0 build 16299
[2018-11-11 21:32:35] Video driver version: 24.20.11021.1000
[2018-11-11 21:32:37] AMD Platform ID: 1
[2018-11-11 21:32:37] AMD platform FOUND
[2018-11-11 21:32:37] Found 3 AMD devices
[2018-11-11 21:32:37] CPU AES-NI: TRUE
[2018-11-11 21:32:37] GPU0: Radeon RX 580 Series [ellesmere] [8192 MB][I: 56.0][W: 8][T: 2][F: 0][A: 0][BUS: 6]
[2018-11-11 21:32:37] GPU1: Radeon RX Vega [gfx900] [8176 MB][I: 62.0][W: 8][T: 2][F: 1][A: 0][BUS: 9]
[2018-11-11 21:32:37] GPU2: Radeon RX Vega [gfx900] [8176 MB][I: 62.0][W: 8][T: 2][F: 1][A: 0][BUS: 3]
[2018-11-11 21:32:37] ADL is enabled
[2018-11-11 21:32:37] Algo switching mode enabled
[2018-11-11 21:32:37] Algo switch minimum time : 60 seconds
[2018-11-11 21:32:37] Cryptonight Haven mode enabled
[2018-11-11 21:32:37] Startup monitor disabled!!
[2018-11-11 21:32:37] Watchdog is in GPU disable mode
[2018-11-11 21:32:37] Starting init of mining threads
[2018-11-11 21:32:37] Created OCL context
[2018-11-11 21:32:37] Using kernel 1 for DeviceID 0 (Thread 0)
[2018-11-11 21:32:37] Using AES 0 for DeviceID 0 (Thread 0)
[2018-11-11 21:32:37] Created OCL command queue for DeviceID 0 (Thread 0)
[2018-11-11 21:32:37] Created OCL input buffer for DeviceID 0 (Thread 0)
[2018-11-11 21:32:37] Created OCL output buffer for DeviceID 0 (Thread 0)
[2018-11-11 21:32:37] Loading haven kernel for DEVICE BUS_ID[6] ...
[2018-11-11 21:32:37] ctx->Program for DeviceID 0 (Thread 0) loaded
[2018-11-11 21:32:37] Using kernel 1 for DeviceID 0 (Thread 1)
[2018-11-11 21:32:37] Using AES 0 for DeviceID 0 (Thread 1)
[2018-11-11 21:32:37] Created OCL command queue for DeviceID 0 (Thread 1)
[2018-11-11 21:32:37] Created OCL input buffer for DeviceID 0 (Thread 1)
[2018-11-11 21:32:37] Created OCL output buffer for DeviceID 0 (Thread 1)
[2018-11-11 21:32:37] Loading haven kernel for DEVICE BUS_ID[6] ...
[2018-11-11 21:32:37] ctx->Program for DeviceID 0 (Thread 1) loaded
[2018-11-11 21:32:37] Using kernel 1 for DeviceID 1 (Thread 2)
[2018-11-11 21:32:37] Using AES 0 for DeviceID 1 (Thread 2)
[2018-11-11 21:32:37] Created OCL command queue for DeviceID 1 (Thread 2)
[2018-11-11 21:32:37] Created OCL input buffer for DeviceID 1 (Thread 2)
[2018-11-11 21:32:37] Created OCL output buffer for DeviceID 1 (Thread 2)
[2018-11-11 21:32:37] Loading haven kernel for DEVICE BUS_ID[9] ...
[2018-11-11 21:32:37] ctx->Program for DeviceID 1 (Thread 2) loaded
[2018-11-11 21:32:37] Using kernel 1 for DeviceID 1 (Thread 3)
[2018-11-11 21:32:37] Using AES 0 for DeviceID 1 (Thread 3)
[2018-11-11 21:32:37] Created OCL command queue for DeviceID 1 (Thread 3)
[2018-11-11 21:32:37] Created OCL input buffer for DeviceID 1 (Thread 3)
[2018-11-11 21:32:37] Created OCL output buffer for DeviceID 1 (Thread 3)
[2018-11-11 21:32:37] Loading haven kernel for DEVICE BUS_ID[9] ...
[2018-11-11 21:32:37] ctx->Program for DeviceID 1 (Thread 3) loaded
[2018-11-11 21:32:37] Using kernel 1 for DeviceID 2 (Thread 4)
[2018-11-11 21:32:37] Using AES 0 for DeviceID 2 (Thread 4)
[2018-11-11 21:32:38] Created OCL command queue for DeviceID 2 (Thread 4)
[2018-11-11 21:32:38] Created OCL input buffer for DeviceID 2 (Thread 4)
[2018-11-11 21:32:38] Created OCL output buffer for DeviceID 2 (Thread 4)
The miner just randomly seems to crash and the miner window gets closed. This seems to be some code exception that closes the miner. It seems to only happen immediately after an algo switch. Would you be so kind to check the code again to see what could possibly close the miner abruptly when performing algo switch? Maybe some kind of race condition? I am also forced to use --resetmineronalgoswitch since i have some vega`s. |
|
|
|
|
chschlumpf
Newbie
Offline
Activity: 24
Merit: 0
|
|
November 12, 2018, 01:23:53 PM |
|
Hello
I have a problem with my VEGA miner since Monero V8. With v7 all my 8 Cards where running properly. But since V8, if only running one card, everything is good but as soon as I activate a second one, i get kernel power 41 and the rig reset.
I already tested the ram, the disk and reinstalled the complete Windows with no change. Also changed PSU but no help
I have ASrock BTC+ Pro
8GB RAM
Sapphire Vega64
Driver 18.5.2, HBCC of, Crossfire disabled
Win10
Any idea? Thanks for helping.
are you sure your psu has enough juice? V8 needs more power than V7 Yes. I have 3800 Watt for these 8 cards. |
|
|
|
|
carlosmonaco
Newbie
Offline
Activity: 105
Merit: 0
|
|
November 12, 2018, 01:28:21 PM |
|
Hello
I have a problem with my VEGA miner since Monero V8. With v7 all my 8 Cards where running properly. But since V8, if only running one card, everything is good but as soon as I activate a second one, i get kernel power 41 and the rig reset.
I already tested the ram, the disk and reinstalled the complete Windows with no change. Also changed PSU but no help
I have ASrock BTC+ Pro
8GB RAM
Sapphire Vega64
Driver 18.5.2, HBCC of, Crossfire disabled
Win10
Any idea? Thanks for helping.
are you sure your psu has enough juice? V8 needs more power than V7 Yes. I have 3800 Watt for these 8 cards. Mine are using less than 2000w for 8 cards (v8 XMR) ... |
|
|
|
|
MinersRus
Member
Offline
Activity: 214
Merit: 24
|
|
November 12, 2018, 02:06:02 PM |
|
V1.6.9 vs V1.7.0 V8 comparison on my 7x Vega 56's
Vega #1 1891 1910 + 19 H/s
Vega #2 1871 1893 + 22 H/s
Vega #3 1884 1904 + 20 H/s
Vega #4 1852 1869 + 17 H/s
Vega #5 1844 1865 + 21 H/s
Vega #6 1855 1874 + 19 H/s
Vega #7 1840 1863 + 23 H/s
---------------------------------
Totals 13037 13178 +141 H/s or about +20 H/s for each Vega 56
Thx doc !~!
Can You share ,settings and configuration,please. All settings for SRBMiner are the same for each Vega 56 and done in the V8 config file: intensity: 112 worksize: 16 threads: 2 Vega 56's #1, #2 and #3 are in one system that has Radeon Adrenalin Edition 18.8.1 installed which actually produces high hash rates than the recommended Radeon Adrenalin Edition 18.5.1 installed in the system with Vega 56's #4, #5, #6 and #7. These two systems are on a Biostar H81A motherboard and are using a single HP 1200 Watt Server Power Supply (87% Efficient) with a 17x 6-pin Breakout board. The motherboard is powered by an 180 watt Pico PSU that gets it's 12 volt input from a 6-pin connector on the breakout board. I like my systems only running on a single power supply. System one is hashing on an i3-4340 at 73 H/s and system two is hashing on an i5-4570 at 195 H/s. All power measurements are done at the wall with a Power Usage Monitor. That way the entire system is measured (motherboard, processor, memory, ssd) and the Vega 56's and it is the real power not the incomplete ones that only look at the software measurements like HWINFO which does not consider the inefficiencies of power supply and internal power conversion circuits or the rest of the system. Realize that V8 is much more power hungry than V7 was. I do not use soft power play tables as I have found that V7 and V8 basically run between P6 & P7 states on the core and P3 on memory. The Vega 56's are reference designs of various vendors with stock BIOS. So my Wattman settings for six of the Vega 56's are: Core: Min P6 1212 MHz @ 905 mv Max P7 1452 MHz @ 925 mv Memory: Min/Max P3 935 MHz @ 900 mv Fans: Min: 2700 Target: 4900 Temperature: Max: 75 Target: 65 I do have one problematic Vega 56 that I have to run at: Core: Min P6 1212 MHz @ 960 mv Max P7 1452 MHz @ 985 mv Memory: Min/Max P3 900 MHz @ 950 mv With all that out of the way here are the final numbers: System one 3x Vega 56's: Vega #1 1911 H/s Vega #2 1893 H/s Vega #3 1904 H/s -------------------- Total Vega's 5708 H/s i3-4340 adds 73 H/s ------------------------- System Total: 5781 H/s Total Power at the wall: 675 watts System two 4x Vega 56's: Vega #4 1869 H/s Vega #5 1865 H/s Vega #6 1874 H/s Vega #7 1863 H/s -------------------- Total Vega's 7471 H/s i5-4570 adds 195 H/s ------------------------- System Total: 7666 H/s Total Power at the wall: 898 watts Thank You very much ,Sir I forgot this setting ( I have since edited my original post) EDIT: I forgot this setting. I needed to do this +10 as a few of the Vega 56's clocks were only in the high 1200's MHz and not the 1350+ MHz they should be and were flicking between P6 and P7 state.. It turned out those were being power limited. So be sure to do this setting also. Power Limit +10 |
|
|
|
|
Bllacky
Newbie
Offline
Activity: 22
Merit: 0
|
|
November 12, 2018, 02:43:43 PM |
|
I can't seem to get this miner to work with 270X in combination with other 280X cards. So rig 1: 3 x R9 290 + 1 X 270X 2018-11-12 16:27:51] CPU AES-NI: TRUE
[2018-11-12 16:27:51] GPU0: AMD Radeon (TM) R9 200 Series [pitcairn] [2048 MB][I: 60.0][W: 8][T: 1][F: 4][A: 0][BUS: 6]
[2018-11-12 16:27:51] GPU1: AMD Radeon (TM) R9 200 Series [hawaii] [4096 MB][I: 60.0][W: 8][T: 1][F: 4][A: 0][BUS: 1]
[2018-11-12 16:27:51] GPU2: AMD Radeon (TM) R9 200 Series [hawaii] [4096 MB][I: 60.0][W: 8][T: 1][F: 4][A: 0][BUS: 2]
[2018-11-12 16:27:51] GPU3: AMD Radeon (TM) R9 200 Series [hawaii] [4096 MB][I: 60.0][W: 8][T: 1][F: 4][A: 0][BUS: 5]
[2018-11-12 16:27:51] ADL is enabled
[2018-11-12 16:27:51] Please use : Adrenalin 18.5.1, 18.5.2 or 18.6.1 drivers
[2018-11-12 16:27:51] CryptonightV8 mode enabled
[2018-11-12 16:27:51] Starting init of mining threads
[2018-11-12 16:27:51] Created OCL context
[2018-11-12 16:27:51] Using kernel 1 for DeviceID 0 (Thread 0)
[2018-11-12 16:27:51] Using AES 0 for DeviceID 0 (Thread 0)
[2018-11-12 16:27:51] Created OCL command queue for DeviceID 0 (Thread 0)
[2018-11-12 16:27:51] Created OCL input buffer for DeviceID 0 (Thread 0)
[2018-11-12 16:27:51] Created OCL output buffer for DeviceID 0 (Thread 0)
[2018-11-12 16:27:51] Loading normalv8 kernel for DEVICE BUS_ID[6] ...
[2018-11-12 16:27:51] ctx->Program for DeviceID 0 (Thread 0) loaded
[2018-11-12 16:27:51] Using kernel 1 for DeviceID 1 (Thread 1)
[2018-11-12 16:27:51] Using AES 0 for DeviceID 1 (Thread 1)
[2018-11-12 16:27:51] Created OCL command queue for DeviceID 1 (Thread 1)
[2018-11-12 16:27:51] Created OCL input buffer for DeviceID 1 (Thread 1)
[2018-11-12 16:27:51] Created OCL output buffer for DeviceID 1 (Thread 1)
[2018-11-12 16:27:51] Loading normalv8 kernel for DEVICE BUS_ID[1] ...
[2018-11-12 16:27:52] ctx->Program for DeviceID 1 (Thread 1) loaded
[2018-11-12 16:27:52] Using kernel 1 for DeviceID 2 (Thread 2)
[2018-11-12 16:27:52] Using AES 0 for DeviceID 2 (Thread 2)
[2018-11-12 16:27:52] Created OCL command queue for DeviceID 2 (Thread 2)
[2018-11-12 16:27:52] Created OCL input buffer for DeviceID 2 (Thread 2)
[2018-11-12 16:27:52] Created OCL output buffer for DeviceID 2 (Thread 2)
[2018-11-12 16:27:52] Loading normalv8 kernel for DEVICE BUS_ID[2] ...
[2018-11-12 16:27:52] ctx->Program for DeviceID 2 (Thread 2) loaded
[2018-11-12 16:27:52] Using kernel 1 for DeviceID 3 (Thread 3)
[2018-11-12 16:27:52] Using AES 0 for DeviceID 3 (Thread 3)
[2018-11-12 16:27:52] Created OCL command queue for DeviceID 3 (Thread 3)
[2018-11-12 16:27:52] Created OCL input buffer for DeviceID 3 (Thread 3)
[2018-11-12 16:27:52] Created OCL output buffer for DeviceID 3 (Thread 3)
[2018-11-12 16:27:52] Loading normalv8 kernel for DEVICE BUS_ID[5] ...
[2018-11-12 16:27:52] ctx->Program for DeviceID 3 (Thread 3) loaded
[2018-11-12 16:27:52] ADL initialised successfully!
So rig 2: 4 x 280X + 1 X 270X [2018-11-12 16:37:50] GPU0: AMD Radeon R9 200 Series [tahiti] [3072 MB][I: 60.0][W: 8][T: 1][F: 4][A: 0][BUS: 5]
[2018-11-12 16:37:50] GPU1: AMD Radeon R9 200 Series [tahiti] [3072 MB][I: 60.0][W: 8][T: 1][F: 4][A: 0][BUS: 7]
[2018-11-12 16:37:50] GPU2: AMD Radeon R9 200 Series [pitcairn] [2048 MB][I: 40.0][W: 8][T: 1][F: 4][A: 0][BUS: 2]
[2018-11-12 16:37:50] GPU3: AMD Radeon R9 200 Series [tahiti] [3072 MB][I: 60.0][W: 16][T: 1][F: 4][A: 0][BUS: 1]
[2018-11-12 16:37:50] GPU4: AMD Radeon R9 200 Series [tahiti] [3072 MB][I: 60.0][W: 16][T: 1][F: 4][A: 0][BUS: 6]
[2018-11-12 16:37:50] ADL is enabled
[2018-11-12 16:37:50] Please use : Adrenalin 18.5.1, 18.5.2 or 18.6.1 drivers
[2018-11-12 16:37:50] CryptonightV8 mode enabled
[2018-11-12 16:37:50] Starting init of mining threads
[2018-11-12 16:37:50] Created OCL context
[2018-11-12 16:37:50] Using kernel 1 for DeviceID 0 (Thread 0)
[2018-11-12 16:37:50] Using AES 0 for DeviceID 0 (Thread 0)
[2018-11-12 16:37:50] Created OCL command queue for DeviceID 0 (Thread 0)
[2018-11-12 16:37:50] Created OCL input buffer for DeviceID 0 (Thread 0)
[2018-11-12 16:37:50] Created OCL output buffer for DeviceID 0 (Thread 0)
[2018-11-12 16:37:50] Loading normalv8 kernel for DEVICE BUS_ID[5] ...
[2018-11-12 16:37:50] ctx->Program for DeviceID 0 (Thread 0) loaded
[2018-11-12 16:37:50] Using kernel 1 for DeviceID 1 (Thread 1)
[2018-11-12 16:37:50] Using AES 0 for DeviceID 1 (Thread 1)
[2018-11-12 16:37:50] Created OCL command queue for DeviceID 1 (Thread 1)
[2018-11-12 16:37:50] Created OCL input buffer for DeviceID 1 (Thread 1)
[2018-11-12 16:37:50] Created OCL output buffer for DeviceID 1 (Thread 1)
[2018-11-12 16:37:50] Loading normalv8 kernel for DEVICE BUS_ID[7] ...
[2018-11-12 16:37:50] ctx->Program for DeviceID 1 (Thread 1) loaded
[2018-11-12 16:37:50] Using kernel 1 for DeviceID 3 (Thread 2)
[2018-11-12 16:37:50] Using AES 0 for DeviceID 3 (Thread 2)
[2018-11-12 16:37:50] Created OCL command queue for DeviceID 3 (Thread 2)
[2018-11-12 16:37:50] Created OCL input buffer for DeviceID 3 (Thread 2)
[2018-11-12 16:37:50] Created OCL output buffer for DeviceID 3 (Thread 2)
[2018-11-12 16:37:50] Loading normalv8 kernel for DEVICE BUS_ID[2] ...
[2018-11-12 16:37:50] Error CL_BUILD_PROGRAM_FAILURE when calling clBuildProgram [ctx->Program] for DeviceID 3 (Thread 2)
[2018-11-12 16:37:50] Error initing GPU's. Stopping miner process
[2018-11-12 16:37:50] Stopping miner process
|
|
|
|
|
|
