 Show Posts
|
|
Pages: « 1 [2]
|
Did you switched the 2 fans and checked if the fan in shows 0 rpm then? I see zigminer says its the fan that is the problem? I think its the controler unit but you could easily check it on this way Regarding fan detection, the next version will be added to fan speed check
You have a date for this? My miner stoped working 10 days ago bcuz of this problem. It shows 0 RPM for the out fan but the fan if turning at full speed. |
|
|
|
Hi So 65 is the absolute max, ill keep my eye on the temps when i put in the new firmware... i was using old software so i actually dont have an idea what the temps are because i didnt mine longer then 5 min when i saw 58 degrees i turned it off and put the old usb in... so this thing might mines at 60+ degrees for a month without my knowledge... I hope this wont take long to make that updatz firmware? Like you read some ppl dont want to lower the fanspeed but they want to put OFF the fanspeed check so the miner can mine again... there fans go full speed but the miner goes in endless reboot because the miner "thinks" the fans are not working.... This sounds stupid and i already know the answer but still i have to ask, isent there a way to add more minable coins or something else to raise our profits again? 22 oktober a coin left and the difficulty of the other coins where double in 1 night our profits where only the half anymore... very frustrating for people that bought this from the first batch at full price ! We want to see our money back on this purchase... things are looking bad once vtc leaves the lyra2rev2 also and becomes verthash... maybe there is a way if you start working on it right now. And spare parts? Like hashboards or controler units? I have a friend with a miner that 1 hashboard doesnt work anymore... so its hashing at 3 /4 ghz... oke ha has a little income its maybe better then those ppls who sit on a not hashing miner unit because it thinks the fan out has 0 rpm but these are 2 big issues that really have to be solved fast .... Grtz 65 degrees Celsius is usually a relatively high temperature, there may be a higher hw error, I may release a firmware version of the adjustable fan speed, but I do not recommend that the user adjust to the lowest position, high temperature will quickly damage the power board. Regarding fan detection, the next version will be added to fan speed check
|
|
|
|
After monitoring it you are right ! It doesnt change, core temp does go lower or up but the hashb not... good 2 know !! The only thing i want to know now is what are acceptable temperatures for those things... maybe @zigminer can answer this? Alex what is your avarage ghz in 24u on the pool itself? Z1 or z1? Grtz iam running 1105 which you are as well so the temps shown are correct. on version 926 they are wrong 930 was the same as well. Wich firmware version do you run on them? So if your statement is correct my temperatures should never change because they only measure once at reset and then stay there until they are reset again!? Ill keep that in my mind and double check They are in my double garage with no plaster just roof tiles so might be cooler. outside temp from app is 15 degrees c. one miner is 40,41,38,39 the other is 39,39,38,38. running 900mh/z and non auto on prohashing. What temp do your hashbords have? the old version only showed the temps straight after a reset the newer versions this was fixed and shows up to date temps. im in Australia first 30 degree day had me worried as well. temps are fine though. So the old version temperatures are not correct? And 60 degrees is legit and good?? Ill look back into the 39 pages but i didnt noticed this post.... If you look back through this post you will see previous versions didn't update the temps shown. So it was reaching 58 but wasn't showing it. @zigminer Does someone has an explanation for hashboard temperatures that are 20 degrees higher with 1105 firmware? I dont understand... when i put in firmware 2609 my hashboards get 35 degrees, when i put in firmware 1105 my hashboards get 58 degrees... all in 5 min mining... so this is impossible ! When its 58 degrees and i shut it down put in the old software again its 35 again... all in a minute difference. What is bothering me is what is correct and can we believe that information? Does anyone has the same going on? I just put in my old usb with old software just because of the idea that its 35 degreed and not 58 but what can i believe? What a voodoo thing
|
|
|
|
|
Well i wonder what is acceptable temps of the hashboards are then... i see mine go to 60 degrees but the only option to shutdown the miner automaticly is core temp and that is around 40-44 degrees...
|
|
|
|
Wich firmware version do you run on them? So if your statement is correct my temperatures should never change because they only measure once at reset and then stay there until they are reset again!? Ill keep that in my mind and double check They are in my double garage with no plaster just roof tiles so might be cooler. outside temp from app is 15 degrees c. one miner is 40,41,38,39 the other is 39,39,38,38. running 900mh/z and non auto on prohashing. What temp do your hashbords have? the old version only showed the temps straight after a reset the newer versions this was fixed and shows up to date temps. im in Australia first 30 degree day had me worried as well. temps are fine though. So the old version temperatures are not correct? And 60 degrees is legit and good?? Ill look back into the 39 pages but i didnt noticed this post.... If you look back through this post you will see previous versions didn't update the temps shown. So it was reaching 58 but wasn't showing it. @zigminer Does someone has an explanation for hashboard temperatures that are 20 degrees higher with 1105 firmware? I dont understand... when i put in firmware 2609 my hashboards get 35 degrees, when i put in firmware 1105 my hashboards get 58 degrees... all in 5 min mining... so this is impossible ! When its 58 degrees and i shut it down put in the old software again its 35 again... all in a minute difference. What is bothering me is what is correct and can we believe that information? Does anyone has the same going on? I just put in my old usb with old software just because of the idea that its 35 degreed and not 58 but what can i believe? What a voodoo thing
|
|
|
|
What temp do your hashbords have? the old version only showed the temps straight after a reset the newer versions this was fixed and shows up to date temps. im in Australia first 30 degree day had me worried as well. temps are fine though. So the old version temperatures are not correct? And 60 degrees is legit and good?? Ill look back into the 39 pages but i didnt noticed this post.... If you look back through this post you will see previous versions didn't update the temps shown. So it was reaching 58 but wasn't showing it. @zigminer Does someone has an explanation for hashboard temperatures that are 20 degrees higher with 1105 firmware? I dont understand... when i put in firmware 2609 my hashboards get 35 degrees, when i put in firmware 1105 my hashboards get 58 degrees... all in 5 min mining... so this is impossible ! When its 58 degrees and i shut it down put in the old software again its 35 again... all in a minute difference. What is bothering me is what is correct and can we believe that information? Does anyone has the same going on? I just put in my old usb with old software just because of the idea that its 35 degreed and not 58 but what can i believe? What a voodoo thing
|
|
|
|
So the old version temperatures are not correct? And 60 degrees is legit and good?? Ill look back into the 39 pages but i didnt noticed this post.... If you look back through this post you will see previous versions didn't update the temps shown. So it was reaching 58 but wasn't showing it. @zigminer Does someone has an explanation for hashboard temperatures that are 20 degrees higher with 1105 firmware? I dont understand... when i put in firmware 2609 my hashboards get 35 degrees, when i put in firmware 1105 my hashboards get 58 degrees... all in 5 min mining... so this is impossible ! When its 58 degrees and i shut it down put in the old software again its 35 again... all in a minute difference. What is bothering me is what is correct and can we believe that information? Does anyone has the same going on? I just put in my old usb with old software just because of the idea that its 35 degreed and not 58 but what can i believe? What a voodoo thing
|
|
|
|
|
@zigminer Does someone has an explanation for hashboard temperatures that are 20 degrees higher with 1105 firmware? I dont understand... when i put in firmware 2609 my hashboards get 35 degrees, when i put in firmware 1105 my hashboards get 58 degrees... all in 5 min mining... so this is impossible ! When its 58 degrees and i shut it down put in the old software again its 35 again... all in a minute difference. What is bothering me is what is correct and can we believe that information? Does anyone has the same going on? I just put in my old usb with old software just because of the idea that its 35 degreed and not 58 but what can i believe? What a voodoo thing
|
|
|
|
|
Is there a way to change the ip to the .0 range instead of the .1 range before i put a new usb firmware in it? My miner is in a .0 homenetwork and when i write new firmware to the usb its default back in the .1 . So maybe i can change it on the usb in some file before i plug it in
Or should i copy my original usb into my new usb and then update via the dashboard? I want to keep my original usb as backup and use a new one..
|
|
|
|
My check nonce is also on, i never tried with off... but xnsub on the other hand i already tried and it give me massive rejects... when i remove xnsub its good again Edit: i have about the same result on hashrate about 6200 I think it was meant to give less rejects due to stale. I ran those settings last night for an hour and ended up going back to how i had it with #xnsub and check nonce on. I had nothing but dramas pools were dying flat out and hash rate was all over the place.This is on Nicehash. I did try prohash and blockmaster wasn't happy with the pay outs compared to Nicehash this was when the miners were earning really well. I have just updated my miners to version 1029 so might try again in a few days though. Why disable check nonce? I'll try these setting on Nicehash. My version is 930 haven't gone further in updates yet. my clocks are set to 1000 and 975 both auto. Was averaging 11-12GH/s before changing. did someone gain full hashrate on prohashing? i only have about 4.5 GH on 850
Disable "Check nonce" and remove "#xnsub". Hashrate will be about 6/6.2 GH with a profit of about 2.8/2.9 mBTC at day. I use 20181029 firmware with restart option enabled at 6, frequency static at 850. Try and let me know if you have same results. Does anyone have better results with nicehash right now? Please share. |
|
|
|
Why disable check nonce? I'll try these setting on Nicehash. My version is 930 haven't gone further in updates yet. my clocks are set to 1000 and 975 both auto. Was averaging 11-12GH/s before changing. did someone gain full hashrate on prohashing? i only have about 4.5 GH on 850
Disable "Check nonce" and remove "#xnsub". Hashrate will be about 6/6.2 GH with a profit of about 2.8/2.9 mBTC at day. I use 20181029 firmware with restart option enabled at 6, frequency static at 850. Try and let me know if you have same results. Does anyone have better results with nicehash right now? Please share. |
|
|
|
|
I see a lot of you ppl mine at prohashing, better profits then nicehash?? What do you get every 24 hours with a z1?
|
|
|
|
Hi, i had some issues as well, but since i put all 3 servers in the dashboard (europe japan and usa) it just switches between if there are pool issues and it keeps on going...
On which pool? Nicehash? Yes 3 nicehash pools, im located in europe so i have eu first then JP and then USA ... i also tried #xnsub but that doesnt work out for me, with xnsub on i have a lot more rejects and the hashrate is not stable |
|
|
|
Hi, i had some issues as well, but since i put all 3 servers in the dashboard (europe japan and usa) it just switches between if there are pool issues and it keeps on going... Had my miner for a couple weeks. Updated the firmware. The hashrate droops to zero every couple hours. Sometimes it fixes itself, sometimes I have to manually reset it. I have tried Nicehash and prohashing, same issue at both pools.
CAN ANYONE HELP?
|
|
|
|
It’s 1:30 am in China, any improvement on the income?
Discount coupon is valid until 31 october. Why not november? Because 1st of november nothing will change and people will mark them as a lier. I wrote before write a review for zig 1 in dayun.company and see what happens when they publish. They write good words and 5 star and use your name like it is yours. Never trust any of their words... i think http://www.dayunmining.com/ is official site? |
|
|
|
Thank you i had forgotten about that write up. ill set the temp limit and see how we go. Gday gents. being in Australia we get some hot temps. today was the first day over 30 in my area. My miners have been shutting down. first on 950 auto and now on 900 auto. Iam assuming that when the temps stay over 50 degrees it will shut off. Looking at the json file it is set to shutdown at 50 degress. has any one changed the temp to 60 or higher? Iam running the 9.30 software. Or do you reckon re doing the thermal paste will help out enough? The miners are in my garage which isn't plastered so has ok air movement. Thanks.
Hi, go to the message thread #174...I used these settings suggested by Mordred for my Z1+ and it works as my machine core temperature gets to 52-53 degrees Celsius but it still runs fine. On the auto stop which settings do you use for the fans? lowerfanspeed in and lowerfanspeed out |
|
|
|
Got this mail from Dayun: [Dayun Company] Information about Profitability
So reply to the mail and ask? 😁
We noticed that the profitability of our equipment dropped to $20/day.
This problem will be solved by November 1, the complexity of the network will be increased, and earnings will be restored.
In this regard, we offer you a coupon for a discount of 14% (free shipping is included), which is valid until October 31.
Discount code is: —
Thank you for staying with us!
So, what’s up on Nov 1? |
|
|
|
|
