 Show Posts
|
|
Pages: « 1 [2] 3 4 »
|
Someone can me help with "Linux Client" Testing, Before Release?
Write me a message if you are interested.. I will give it a try tonight when I reload one of my troublesome Windows rigs to Linux. Problem though, there really isn't much in that repo... not released yet. i said before release. so its in my computer only, but i can send to you Yep, just PM me a link. Preferably one I can wget the archive from. |
|
|
|
Someone can me help with "Linux Client" Testing, Before Release?
Write me a message if you are interested.. I will give it a try tonight when I reload one of my troublesome Windows rigs to Linux. Problem though, there really isn't much in that repo... |
|
|
|
0.059 USD in Central Illinois, USA
Apparently that's a pretty insanely good price?
Pretty decent compared to most! $0.023 here in Central Washington  |
|
|
|
|
I mine to my coinbase and have never had a problem.
To answer your miner question, minerstat has all the miners built in. No need to go download them separately.
|
|
|
|
Linux Client Works Perfect!  I'm Getting closer to Alpha.  Awesome!! Looking forward to it! |
|
|
|
PWN meaning Western Canada? The heat from the miners could be nice, I'd definitely look into building a small building for miners at that cost if expanding is at a physical limit.
Pacific North West, top left corner of the US I have been thinking about a small building and another electrical service just for it. Have you looked into any prices for the cost of adding an electrical service? We have a 300 amp (200+100) service in our house and another 100 amp service in the barn right now, but I'm curious about adding another 200 amp service in the barn in a couple of years if profitability stays anywhere decent. I haven't yet. I'm still a few rigs away from needing more juice. Since our power comes in overhead instead of underground I can't imagine it would be a huge cost. |
|
|
|
PWN meaning Western Canada? The heat from the miners could be nice, I'd definitely look into building a small building for miners at that cost if expanding is at a physical limit.
Pacific North West, top left corner of the US I have been thinking about a small building and another electrical service just for it. |
|
|
|
Ouch. These prices make me appreciate my $0.023 / KWh even more. Continuing to build out as the funds come available, GPU mining is definitely not dead Where do you get those prices, and can I colocate? LOL He should definitely think about doing a hosting service with power rates like that. hahaha way up here in the PNW. My current plans will fill out my current electrical panel and service. No plans to colo at the moment. Trying to figure out how and where I'm going to fit more rigs for myself. |
|
|
|
Agreed. I use 16.9.2 on my rigs with modified bios and have no problems. |
|
|
|
Ouch. These prices make me appreciate my $0.023 / KWh even more. Continuing to build out as the funds come available, GPU mining is definitely not dead |
|
|
|
2.9 seems to have broken the ability to properly run two instances of the node simultaneously. They will run and the miners will mine but statistics are not showing properly again. https://minerstat.com/public/olaf_d.html CHARLIE and CHARLIE-380 are the same rig but mining ZEC on some cards and ETH/DCR on others. i fixed and improved a lot. . maybe few days v2.9.1 resolve all of issues/bugs what users reported here/email. you can use v2.8.1 that version is stable. I figured it out. My mport.txt file was overwritten on the update so my 2nd instance was reading stats from the miner on 3333. Maybe it would be better to specify the mport on the miner config page instead of the mport.txt file? |
|
|
|
2.9 seems to have broken the ability to properly run two instances of the node simultaneously. They will run and the miners will mine but statistics are not showing properly again. https://minerstat.com/public/olaf_d.html CHARLIE and CHARLIE-380 are the same rig but mining ZEC on some cards and ETH/DCR on others. |
|
|
|
I re-arranged my rigs a little. I had a rig with a mix of amd and nvidia and all went fine. Now I took the AMD's out so only nvidia left. When I start the miner the miner software launches, then says "no amd found, closing". What do I set for claymore-zec in config file to mine with nvidia?
claymore-zec is only amd use ewbf-zec instead Doh... Thank you very much! Is there by any chance a bug with the pool statistics for flypool? It shows: Reported Hashrate: 0.0H/s. But when I go to the flypool page ( http://zcash.flypool.org/miners/t1RrWqqS9NJLiCnavbBwuX8wLnZ4EHMk5BD) it does show values  I experience the same thing, likely a bug in the way it pulls the statistics. |
|
|
|
can i use either the ZEC or ETH address to donate for a 3 month 10 Dollar plan for now , till I see how far you all go and how long you last .. which I hope is forever, I Like what i see and waiting for the Linux version so i can put my PI's to use for the monitor part under Linux if it works, that way .
in time , I will end up paying for the life time thing, but for now, I'll take it slow ..
why with ZEC or ETH less hassle using those coins so far no major wallet issue to deal with ..
Or even PayPal, I'll take a risk and send the cash as friends and family so there is no fee just be in the USA for the no fee .... or have a USA account ..
Why not just use shapeshift and send the BTC to your donate address? |
|
|
|
any eta for linux version?
Nice tool. Good job!
30-45 days. I am anxiously waiting, too. |
|
|
|
@olaf_d sorry i disabled every special characters in url theres are several hacking tries ) i will add the _ character when i get home. few hours. the decred must work maybe you use bad pool with old protocol. yiim and suprnova what i know to work but in different port. @Jamievs No problem, thanks! It is great seeing minerstat improve every day. I am anxious to try the Linux build, do you have an ETA on the alpha? |
|
|
|
Anyone else gets errors with mining DCR?
Edit: I guess it is a pool issue. I changed to decrespol and now it is working again.
edit2: nvm, decredpool 100% rejects right now.
I am mining fine with new Claymore 9.2, which miner are you using? The one included in the package, so also 9.2. I jist disabled DCR and it switched to PASC. Pasc is working fine.. DCR working fine for me https://minerstat.com/public/olaf_d.html which pool are you using? Suprnova port 3252 is accepting my shares. edit: looks like public profiles are slightly broken and complaining of XSS @coinscrow |
|
|
|
Anyone else gets errors with mining DCR?
Edit: I guess it is a pool issue. I changed to decrespol and now it is working again.
edit2: nvm, decredpool 100% rejects right now.
I am mining fine with new Claymore 9.2, which miner are you using? |
|
|
|
Claymore only display GPU temperatur for GPU 0. I want to see or log temperature for all GPU
How to do so?
Do you have crossfire activated? Make sure you are NOT using RDP, use teamviewer instead for example Why not use RDP? When you use RDP, the display driver used is a generic Microsoft one and it messes with things. Teamviewer or VNC don't cause this problem. |
|
|
|
The new update looks very nice!
Any update on the Linux client? I've had to move back to simpleminer's Linux distro due to issues trying to use Windows.
im working on this alone, so i can't say when will able to test. but if you want to try before release i give ability to test the alpha. i will post about it I would love to test the Alpha, I have been having issues with one of my miners on Windows. |
|
|
|
|
