beastuzzi
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 24, 2017, 04:18:10 PM |
|
- EthMan: added ReasonID parameter to .bat file which is executed when some rig has problems, check "sample.bat" for details.
Did anyone find this sample.bat? Anyone know its syntax?
|
|
|
|
jackbox
Legendary
Offline
Activity: 1246
Merit: 1024
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 24, 2017, 04:20:59 PM |
|
- EthMan: added ReasonID parameter to .bat file which is executed when some rig has problems, check "sample.bat" for details.
Did anyone find this sample.bat? Anyone know its syntax?
It is called start.bat in the Claymore folder but doesn't include the environment variables, but those only need to be set once and Windows remembers them, if you are using Windows.
|
|
|
|
yoonline
Newbie
Offline
Activity: 51
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 24, 2017, 04:37:28 PM |
|
Funky artifacts including jagged black triangles on screen
sounds like VRAM that's unstable (too low voltage, too high clock, too tight timings, etc) I bet if rip the plate off it says Hynix on those chips. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) gpu-z is reporting Samsung RAM but it must use a bit of Hynix for something. OMG stay away from MSI and cards with Hynix RAM or you'll end up so butt-hurt your asshole will drag on the ground behind you as you walk. what the problem with the hynix all my gpus are hynix and they doing very well, support the most tight timing and clocks and very stable, i got recently 2 samsung and what a pain to make its stable.
|
|
|
|
Teress
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 24, 2017, 04:49:10 PM |
|
Claymore only display GPU temperatur for GPU 0. I want to see or log temperature for all GPU
How to do so?
I've asked for the same week ago, but no one helped me nor answered.. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
Skzzik
Newbie
Offline
Activity: 15
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 24, 2017, 04:58:22 PM |
|
Claymore only display GPU temperatur for GPU 0. I want to see or log temperature for all GPU
How to do so?
Do you have crossfire activated?
|
|
|
|
Exsumane
Newbie
Offline
Activity: 30
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 24, 2017, 05:01:03 PM |
|
Funky artifacts including jagged black triangles on screen
sounds like VRAM that's unstable (too low voltage, too high clock, too tight timings, etc) I bet if rip the plate off it says Hynix on those chips. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) gpu-z is reporting Samsung RAM but it must use a bit of Hynix for something. OMG stay away from MSI and cards with Hynix RAM or you'll end up so butt-hurt your asshole will drag on the ground behind you as you walk. what the problem with the hynix all my gpus are hynix and they doing very well, support the most tight timing and clocks and very stable, i got recently 2 samsung and what a pain to make its stable. Some people think Samsung is better.
|
|
|
|
AltScope
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 24, 2017, 05:37:35 PM |
|
had the latest version (9.2) running for 11 hours now mining eth+dcr at nicehash all seems pretty stable on my 480's not noticed any dips in speeds have 0.32% & 1.25% rejects on eth & dcr respectively, nice job Claymore.
Whats the problem with hynix ram? I've been mining for a couple of years now and never checked what ram was on my cards, not had any problems. so I've been super lucky or its a myth? or is it just that I dont bother with overclocking/undervolting?
|
|
|
|
zorvalth
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 24, 2017, 06:02:36 PM |
|
This is the activity of my miners: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fvgy.me%2Fl2W3GQ.png&t=665&c=nNqiN3yy4C19gQ) The Yellow one is the only one on 9.1 and Eth Only
|
|
|
|
tperalta82
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 24, 2017, 06:02:56 PM |
|
Claymore only display GPU temperatur for GPU 0. I want to see or log temperature for all GPU
How to do so?
Do you have crossfire activated? Make sure you are NOT using RDP, use teamviewer instead for example
|
|
|
|
rawbot
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 24, 2017, 06:10:28 PM |
|
I'm sick to death of my miner crashing. I have six rx 470 8gb sapphire cards and it can run ok for days, then locks up. Then I have to restart it about 10-20 times because I constantly get the message "Ethdcrminer64.exe has stopped working". Then I go into GPUZ and see that one of the cards is not reporting data fully. After 10 restart or so it starts working again, and I get a few more days mining, sometimes less.
What could be causing this? All cards are cool, well ventilated running at 74 degrees contant. this issue is really pissing me off now. All parts are relatively high quality, EVGA power supply etc.
I am running win 10 64 bit
|
|
|
|
Teress
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 24, 2017, 06:29:34 PM |
|
Claymore only display GPU temperatur for GPU 0. I want to see or log temperature for all GPU
How to do so?
Do you have crossfire activated? Make sure you are NOT using RDP, use teamviewer instead for example Why not use RDP?
|
|
|
|
skingun
Newbie
Offline
Activity: 47
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 24, 2017, 07:44:51 PM |
|
Hi I recently started using Claymore I run Kaspersky on my PC as it is not just a mining station. I have been forced to pause Kaspersky when running Claymore as it prevents Claymore from opening. My PC defaults to Windows Defender and I have set exclusions to allow Claymore to run. Is there a work around so I can keep Kaspersky running. I have added the Claymore folder to my exclusions list in Kaspersky but this is not working. Perhaps there is another setting I am missing? Any help appreciated. Best,
|
|
|
|
sikkan
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 24, 2017, 07:47:36 PM |
|
I'm sick to death of my miner crashing. I have six rx 470 8gb sapphire cards and it can run ok for days, then locks up. Then I have to restart it about 10-20 times because I constantly get the message "Ethdcrminer64.exe has stopped working". Then I go into GPUZ and see that one of the cards is not reporting data fully. After 10 restart or so it starts working again, and I get a few more days mining, sometimes less.
What could be causing this? All cards are cool, well ventilated running at 74 degrees contant. this issue is really pissing me off now. All parts are relatively high quality, EVGA power supply etc.
I am running win 10 64 bit
What if you try to reduce to 5 gpus? Perhaps thats the problem? Or psu not powerful enough? Do you undervolt? If not, try that and reduce core speed if needed.
|
|
|
|
olaf_d
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 76
Merit: 11
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 24, 2017, 07:48:49 PM |
|
Claymore only display GPU temperatur for GPU 0. I want to see or log temperature for all GPU
How to do so?
Do you have crossfire activated? Make sure you are NOT using RDP, use teamviewer instead for example Why not use RDP? When you use RDP, the display driver used is a generic Microsoft one and it messes with things. Teamviewer or VNC don't cause this problem.
|
|
|
|
Teress
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 24, 2017, 08:21:27 PM |
|
Claymore only display GPU temperatur for GPU 0. I want to see or log temperature for all GPU
How to do so?
Do you have crossfire activated? Make sure you are NOT using RDP, use teamviewer instead for example Why not use RDP? When you use RDP, the display driver used is a generic Microsoft one and it messes with things. Teamviewer or VNC don't cause this problem. RDP, VNC etc. should be independent on hardware. Maybe it is Win specific ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Sorry, I am mainly from Unix land, thats why I'm surprised...
|
|
|
|
rawbot
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 24, 2017, 08:35:25 PM |
|
I'm sick to death of my miner crashing. I have six rx 470 8gb sapphire cards and it can run ok for days, then locks up. Then I have to restart it about 10-20 times because I constantly get the message "Ethdcrminer64.exe has stopped working". Then I go into GPUZ and see that one of the cards is not reporting data fully. After 10 restart or so it starts working again, and I get a few more days mining, sometimes less.
What could be causing this? All cards are cool, well ventilated running at 74 degrees contant. this issue is really pissing me off now. All parts are relatively high quality, EVGA power supply etc.
I am running win 10 64 bit
What if you try to reduce to 5 gpus? Perhaps thats the problem? Or psu not powerful enough? Do you undervolt? If not, try that and reduce core speed if needed. Undervolt by how much? for rx 470 sapphire 8gb? The psu is a 1000w evga brand new. There are only 6 cards connected to the machine and a small SSD
|
|
|
|
xanx
Newbie
Offline
Activity: 37
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 24, 2017, 08:50:32 PM |
|
I'm sick to death of my miner crashing. I have six rx 470 8gb sapphire cards and it can run ok for days, then locks up. Then I have to restart it about 10-20 times because I constantly get the message "Ethdcrminer64.exe has stopped working". Then I go into GPUZ and see that one of the cards is not reporting data fully. After 10 restart or so it starts working again, and I get a few more days mining, sometimes less.
What could be causing this? All cards are cool, well ventilated running at 74 degrees contant. this issue is really pissing me off now. All parts are relatively high quality, EVGA power supply etc.
I am running win 10 64 bit
What if you try to reduce to 5 gpus? Perhaps thats the problem? Or psu not powerful enough? Do you undervolt? If not, try that and reduce core speed if needed. Undervolt by how much? for rx 470 sapphire 8gb? The psu is a 1000w evga brand new. There are only 6 cards connected to the machine and a small SSD happens to me as well, but not that frequent. 1000w seems low for 6 cards...1200+ might be better. if your tired of restarted write a script or include in your batch file so that it restarts after x amount of time so at least it will do that on its own
|
|
|
|
vapourminer
Legendary
Offline
Activity: 4424
Merit: 3847
what is this "brake pedal" you speak of?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 24, 2017, 09:23:11 PM |
|
I'm sick to death of my miner crashing. I have six rx 470 8gb sapphire cards and it can run ok for days, then locks up. Then I have to restart it about 10-20 times because I constantly get the message "Ethdcrminer64.exe has stopped working". Then I go into GPUZ and see that one of the cards is not reporting data fully. After 10 restart or so it starts working again, and I get a few more days mining, sometimes less.
What could be causing this? All cards are cool, well ventilated running at 74 degrees contant. this issue is really pissing me off now. All parts are relatively high quality, EVGA power supply etc.
I am running win 10 64 bit
remove and reseat everything. run memtest86 overnight. all vbios stock?
|
|
|
|
tperalta82
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 24, 2017, 10:09:12 PM |
|
Claymore only display GPU temperatur for GPU 0. I want to see or log temperature for all GPU
How to do so?
Do you have crossfire activated? Make sure you are NOT using RDP, use teamviewer instead for example Why not use RDP? Because bugs exist! It's in the readme , make sure you read it: It seems RDP uses a virtual display adapter that makes claymore only detect one card for the temp readings " I see only one card via Remote Desktop Connection. It's a problem of RDC, use TeamViewer or some other remote access software. " -> From the readme
|
|
|
|
Ursul0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 24, 2017, 10:27:00 PM |
|
Claymore only display GPU temperatur for GPU 0. I want to see or log temperature for all GPU
How to do so?
Do you have crossfire activated? Make sure you are NOT using RDP, use teamviewer instead for example Why not use RDP? Because bugs exist! It's in the readme , make sure you read it: It seems RDP uses a virtual display adapter that makes claymore only detect one card for the temp readings " I see only one card via Remote Desktop Connection. It's a problem of RDC, use TeamViewer or some other remote access software. " -> From the readme because RDP is shit. it fucks with graphic cards in a weird way, nothing to do with claymore. I had exactly the same behavior with VM that was utilizing 3D of the GPU and (just as miners would) if it was running I could use it no problem, but if I tried to start it - it would refuse claiming that there's no graphic card that supports 3D
|
|
|
|
|