$DAO hacked for $50M Thats what I am Hearing...
|
|
|
I have a question...
I run my Nano's at -96mv In afterburner with a -25% Power Limit. (55.3MH for the pair) Whole rig with i7-3770k (330Watts from the wall)
Core and Mem @ 1020/500
However....
When I Flash the cards to 800/300... -100mv
I cant over clock the core to 1000 without it crashing....
Not sure what else I could try?
|
|
|
Question, what drivers and miner you using on the modded Bios?
|
|
|
Hello ocminer, I have same problem with http://rigs.online/ , I am rent Rig2 MH/s: 420 and have "0" hashrate in eth.suprnova (rental ongoing in rigsonline), also I want to withdrawal my 0.07906667 BTC (pending about 3 hours) . Can you help me? (MEDVEDja ID:1619) Rental the same rig... and have the same problem, however, I know I put the wrong worker in... can it be sorted @ocminer? Rental ID 1666
|
|
|
Do we have time frame on when we will have X13 for nvidia?
|
|
|
Is there a Program to restart ccminer50 or bat file on 750ti?
as My miner Keeps rebooting every 6-7 hours.
Windows 8.1
|
|
|
Quick Question,
Locally, the 750ti comes at a 30% cost premium over the base GTX 750. Is the Ti version worth the extra cost? If so, why?
not good for density, the same reason why the 750ti will become obsolete when high-end maxwell will come out it depends. Maybe the $/kh wasn't as good as 750ti. We will know when it's out. I heard 800 series is going to be very expensive. It could be over priced and 750ti might end up being the winner for $/kh My 5 card Rig, 750 ti, No overclock,... Hashs at 2.2mh per card. And pulls 297 watts from the wall..... Have a I5 2500 cpu in that miner tho.
|
|
|
Need a little help.....when running X11
Have 2, 5 card 750 TI Rigs....
1) Is Running @ 2.2Mh per Card with a I5 Cpu at 14%
2nd Rig, The Cards are Running at only 1.7Mh with a Inter Pentium G3420 at 81% when running.....
Do I need a better CPU for the 2nd rig?
|
|
|
As I mentioned this before, it is possible it doesn't work without modifying sgminer to work with it. Strange though, a user claimed it compiled the kernel for him.
This opencl code has 11 kernels instead of just one as in regular sgminer. The speed improvement comes from better use of SIMD by executing shorter kernels instead of a single long one. There's some memory overhead because of it, but it's largelly compensated by the speed improvement. How can i make this work with conf file and not bat file ? And btw if you dont fix the missing temps of the cards, this would be a no go ... too risky Download the mingw version. All temps / fans working my my end. mingw ? what does that mean ? Is this still for windows ? Go back to the 1st post on this thread and click the download link for dropbox. The author updated the files with newer versions. Download the mingw version of the miner and you will have an sgminer which shows temps and fan speeds accurately now. I am running it on Windows 8.1 with CGWatcher and it works well. Cant seem to get CGWatcher working with it, won't pick up the new profile.
|
|
|
Can't seem to get cgwatcher
Get Cygcurl-4.dll error.
Not sure how to set the path
add this: set PATH=%PATH%;./dlls set TERMINFO=.\dlls\terminfo to the start of the .bat file I don't have a Bat file, Cgwatcher does it for me. do I stick that in ''Miner Arguments'' or to the conf.file? Just run 'run.bat' which comes with sgminer and dll files while your CGWatcher is on, it will detect and ask you whether to set the running sgminer as another Profile ? Then make a profile and edit it. CGWatcher Won't detect the profile when its running... Delete your (not-working) kirino-sphsgminer profile first, then run "run.bat". let it run few seconds, accept some shares then close it. CGWatcher should pop up "'Profile not found' The miner that is currently running is not used in any profiles, would you like to create a profile for it now" Where would I Find ''Delete your (not-working) kirino-sphsgminer profile first'' As I am runnning CGWatcher 1.35 Just downloaded and installed 1.38, that has no profiles. And won't detect SGminer working So you might not create any profile yet. So no need to delete anything. Then just run "run.bat" (is it working or not?) If it's working, then close it. And click the CGWatcher and it pops up like this Thanks for your help.... However I am not getting the Pop up to make a new profile, even during when its running or when its closed.
|
|
|
Can't seem to get cgwatcher
Get Cygcurl-4.dll error.
Not sure how to set the path
add this: set PATH=%PATH%;./dlls set TERMINFO=.\dlls\terminfo to the start of the .bat file I don't have a Bat file, Cgwatcher does it for me. do I stick that in ''Miner Arguments'' or to the conf.file? Just run 'run.bat' which comes with sgminer and dll files while your CGWatcher is on, it will detect and ask you whether to set the running sgminer as another Profile ? Then make a profile and edit it. CGWatcher Won't detect the profile when its running... Delete your (not-working) kirino-sphsgminer profile first, then run "run.bat". let it run few seconds, accept some shares then close it. CGWatcher should pop up "'Profile not found' The miner that is currently running is not used in any profiles, would you like to create a profile for it now" Where would I Find ''Delete your (not-working) kirino-sphsgminer profile first'' As I am runnning CGWatcher 1.35 Just downloaded and installed 1.38, that has no profiles. And won't detect SGminer working
|
|
|
Can't seem to get cgwatcher
Get Cygcurl-4.dll error.
Not sure how to set the path
add this: set PATH=%PATH%;./dlls set TERMINFO=.\dlls\terminfo to the start of the .bat file I don't have a Bat file, Cgwatcher does it for me. do I stick that in ''Miner Arguments'' or to the conf.file? Just run 'run.bat' which comes with sgminer and dll files while your CGWatcher is on, it will detect and ask you whether to set the running sgminer as another Profile ? Then make a profile and edit it. CGWatcher Won't detect the profile when its running...
|
|
|
Can't seem to get cgwatcher
Get Cygcurl-4.dll error.
Not sure how to set the path
add this: set PATH=%PATH%;./dlls set TERMINFO=.\dlls\terminfo to the start of the .bat file I don't have a Bat file, Cgwatcher does it for me. do I stick that in ''Miner Arguments'' or to the conf.file?
|
|
|
Can't seem to get cgwatcher working
Get Cygcurl-4.dll error.
Not sure how to set the path
|
|
|
they are still behind if the 2.8MH/s for a 750ti would be true 2.8Mh/s Out yet for the 750ti?
|
|
|
cygcurl file-4.dll not see how to fix win 8.1 not run
Program runs... but get the same when I run it thur CGWatcher Fix around?
|
|
|
wow people still come to BTCtalk for info ?
Does anyone not see the triple bottom forming?
Blackcoin will go up once you sell your coins.
Do you really think people here or BC care about triple or double bottoms or coffee cups or inverted reverted lines? +1.. Whens the blackcoin cards coming IE?
|
|
|
MintPal @MintPalExchange There was a successful double spend attack on WhiteCoin, so we have taken the market offline and stopped deposits and withdrawals. 1/2
MintPal @MintPalExchange Please do not do any WC transactions right now. 2/2
|
|
|
|