Just measured the current through the blades of the A2Mini, for 2 blades it takes 22A. that is 264W. I wonder where the other 100W goes, maybe dissipated in the PSU, seems like a very bad efficiency of 72.5%. I assume the controller wont take much.
|
|
|
I see no leds on the blade Strange on my blades there is a whole row of green SMD LEDS just below the 12V connector.
|
|
|
Well I ordered my 2nd A2 Mini a few hours ago, and I've just had a dispatch notification.
Well I've also got a dispatch notification, and what is more they fully compensated the mining loss I had these past two weeks. I have to say I was a little depressed about the late shipment and all, but they kept their promises.
|
|
|
The Scripta Zeus MinerEU version only support 1 Zeus Miner (1 USB device) . and you need to setup the chip count on the Miner setting tab to make sure it works well.
Can you make a version that works with more than one USB device? That should not be to difficult. For instance when you have a number of Blizzards, you don't want to need a Raspberry Pi for each one. The zeusController does work with more then one device. Yes indeed, that is what I'm using now.
|
|
|
The Scripta Zeus MinerEU version only support 1 Zeus Miner (1 USB device) . and you need to setup the chip count on the Miner setting tab to make sure it works well.
Can you make a version that works with more than one USB device? That should not be to difficult. For instance when you have a number of Blizzards, you don't want to need a Raspberry Pi for each one.
|
|
|
You're right.
I've been mining at blackcoinpool for 2 days and I've got way less than it should have been according to their reported results. Simple solution, I don't mine there anymore.
|
|
|
Crap ass chinese PSU! My A2 just broke down well the psu! That in two weeks Mine is still running, and I have a spare one when it breaks. I don't understand why they use a PSU with too small capacity. There is also a 40A version, will cost maybe a few $ extra. They want to grab as much $ from your pocket as they can. Mine is running very well on a BeQuite 420 Watts For people who are waiting on theirs to arrive could rent mine in the mean time : https://www.miningrigrentals.com/rigs/3166Of course an ATX PSU is fine, but not so easy to put in the standard housing without making additional holes.
|
|
|
Crap ass chinese PSU! My A2 just broke down well the psu! That in two weeks Mine is still running, and I have a spare one when it breaks. I don't understand why they use a PSU with too small capacity. There is also a 40A version, will cost maybe a few $ extra. They want to grab as much $ from your pocket as they can. Edit: Just ordered two of these PSU's, maybe better to replace them right away. http://www.meanwell.nl/Images/pdf/datasheets/HRP-450-spec.pdf
|
|
|
I just realised it's Saturday, not Friday. I guess MinerEU has managed again to push taking care of my problem forward for a week...
Didn't they ship your blade yet? At least I thought they were going to ship a replacement blade to you on Friday. Ye that's what I thought. But believe it or not, somewhere this week I kinda lost a day so the entire yesterday I was thinking today would be Friday I guess that's what happens when you don't leave the house and live on EST Sure I believe you. I've been behind the PC for 6 day's in a row without leaving the house. Sometimes you completely forget what day it is. Today I went out to bike and get some exercise.
|
|
|
I just realised it's Saturday, not Friday. I guess MinerEU has managed again to push taking care of my problem forward for a week...
Didn't they ship your blade yet? At least I thought they were going to ship a replacement blade to you on Friday.
|
|
|
The one running scripta was acting up aswell when running zeusController. Looks like one blade is messing?
Yes, it looks like it. But it is very weird that they are both working on Leaserig. I had sometimes problems like this when the difficulty was way too low, but with vardiff it should go better after some minutes. Or you should try a pool where you can set the difficulty by hand, and try to set it at 1024 or higher.
|
|
|
Mine was pretty quick, they only seem to work in the middle of the night (UK time), so if you request it now you may not get it until about 2am (GMT)
I've been thinking for awhile that it's very possible that they are simply in China and only have a wharehouse here. The fact that the return address for my broken A2 is adressing the 'building manager' kinda supports that The main operation is in the UK, and we worked really hard. you have to notice that China will have whole afternoon overlap with UK morning till noon. During the day, we have a lot to do so, the amount of emails we can reply to is very limited, just because you receive the reply in the middle of the night, doesn't mean we did it from China. Darren is working at the warehouse, many of you who pickup must have met Darren and Jing ,Jing actually lived very close by our warehouse , for many of you who know Canary wharf well, he is on isle of dogs and 5 min drive to warehouse. Bill lives across the city in northwest london,Zone 3 , Goders green if you know what I am talking about. it is a 45 min drive for Bill to visit warehouse through A406. and he definitely hate the traffic. We do not like reveal a lot of information about us , but that is only for safety purposes. if you keep half million USD worth stock somewhere , don't you need to be careful ? We have a return address that is different from our pickup location for that very purpose. London isn't that safe as you would imagine Compared to a lot of other cities London is very save. But I can imagine that you don't want to give everybody your exact whereabouts.
|
|
|
When it is an X3 it should be 64 chips. The software for the Zeus is crap though, lot's of problems with it. I'm using a ras pi with the Minereu setup I didn't know MinerEU has their own software for Zeus already. At the moment I use the Zeus PI image v3, which gives me the least problems. hi I got it from there web site Here's the GitHub link https://github.com/MinerEU/scripta_a2/tree/zeusI had to build my own image But it works very well It's based on scripta Thanks! I will take a look at it.
|
|
|
When it is an X3 it should be 64 chips. The software for the Zeus is crap though, lot's of problems with it. I'm using a ras pi with the Minereu setup I didn't know MinerEU has their own software for Zeus already. At the moment I use the Zeus PI image v3, which gives me the least problems.
|
|
|
With me the original PI image v3 from Zeus works best.
I tried an Hashra image and Starminer, and the modified bfgminer 4.2.1, all gave a lot of problems.
I switched off 'nocheck-golden' and 'ltc-debug', whatever it means, now it seams to run without crashing after some time.
|
|
|
When it is an X3 it should be 64 chips. The software for the Zeus is crap though, lot's of problems with it.
|
|
|
Very happy to hear that the wait is over. Hopefully I will have it by Wednesday or Thursday. Being happy over just a promise is something I stopped doing long ago. On a sidenote: MinerEU website is offline... Now it is back up, albeit a little bit slow.
|
|
|
Very happy to hear that the wait is over. Hopefully I will have it by Wednesday or Thursday.
|
|
|
How about the shipment from China? Is it still on schedule?
|
|
|
It is amazing what you can see with Google Street View nowadays!
|
|
|
|