|
anyone have problems with Nicehash if mining Coockarood29 or Coockaroom29 with GMiner 1.96 ?
I always get "End of file" error and connection will be closed.
Looks like Nicehash not correct recognize "Grin29" algo param.
I have set in AM for each algo explicit algo params name like: coockarood29 and coockaroom29 and looks like its works now.
|
|
|
|
Hi I have 107ti cortex algo says "out of memory" ? is it nomal? 1080 with 8gb work on hiveos, but 1070ti with 8gb can't?
You need to allow more virtual memory Better ask Microsoft, why they theft VRAM from each GPU in Win10 )))) So it's not possible under windows 10 then? If there is a way pls enlighten me on Win10 no way, use Win7 or Linux if you want use full VRAM of your GPU |
|
|
|
Hi I have 107ti cortex algo says "out of memory" ? is it nomal? 1080 with 8gb work on hiveos, but 1070ti with 8gb can't?
You need to allow more virtual memory Better ask Microsoft, why they theft VRAM from each GPU in Win10 )))) |
|
|
|
|
@patrike
Hi boss.
this scenario not good work:
AM managed different rigs Win & Linux clients.
If i try to put custom URL in "Predefined Managed Software Properties" with Windows package, then Linux rig also download Windows version and this is of course wrong. We need different field for "Custom URL" for Linux.
Regards
|
|
|
|
|
yes patrike, SHA256 was switched off, now all ok with BTC icon
|
|
|
|
anyone know web service where i can recive balance for Bech32 BTC address format over API?
I cant fully use Wallet Balance feature in AM if i put Bech32 addresses.
Awesome Miner uses blockchain.com for BTC wallet balance. Please try the following Block Explorer API URL instead: https://api.blockcypher.com/v1/btc/main/addrs/[address]/balance this explorer work with "Bech32" in "Coin balance properties" dialog by clicking "Test settings", but not in "Balance!->"Wallet balance" tabs. This explorer works with all BTC address formats and everywhere in AM: https://chainz.cryptoid.info/btc/api.dwsFound small bug in AM, i cant set BTC as coin in: "Coin balance properties"->Coin BTC simple not present in drop down list!? |
|
|
|
|
anyone know web service where i can recive balance for Bech32 BTC address format over API?
I cant fully use Wallet Balance feature in AM if i put Bech32 addresses.
|
|
|
|
|
@Binary100100
Maybe that help you:
Create folder NVSMI in C:/Programm Files/NVIDIA Corporation
find on computer file nvml.dll and copy to NVSMI
restart miner
|
|
|
|
GMiner1.93 after hardfork of Grin29 impossible to mine on Nicehash, watchdog in miner not activated, all shares are above the target or rejected.
How to enable native GMiner watchdog? Adding "-w 1" not help because "-w 0" is set internally in AM
You can manually set the command line parameter "-w 1". It's true that Awesome Miner do add "-w 0" by default, but it will not be added if Awesome Miner see that you already have a "-w" parameter. For most of the default parameters Awesome Miner set, you can manually override it by setting another value and Awesome Miner will use your parameter value instead. i have set manually -w 1, but then Gminer exit with with error: -w parameter cant be set twice I set this parameter over Option->Managed Software |
|
|
|
|
we need integration of Nichehash Coockaroom service in AM.
At the moment profit switcher dont get profitability info for this algo.
|
|
|
|
|
Looks like i am not a one, who have problem to mine grin29 on Nicehash after hardfork.
All shares rejected or miner crash with "end of file" error.
Anyone was able to mine after hardfork using AwesomeMiner?
|
|
|
|
|
GMiner1.93 after hardfork of Grin29 impossible to mine on Nicehash, watchdog in miner not activated, all shares are above the target or rejected.
How to enable native GMiner watchdog? Adding "-w 1" not help because "-w 0" is set internally in AM
|
|
|
|
|
Hi boss, AM need some improvements
example: I have rig with 8 GPUs, if i use GPU selection and use only 7 GPUs (GPU ID 6 switched off), AM show me in GPU tab this GPU ID order: 0, 1, 2, 3, 4, 5, 6 (that is not correct) it must be: 0, 1, 2, 3, 4, 5, 7
If i check GPU ID in miner (GMiner) console output, GPU ID assigned properly.
And please add "Clone" function to "GPU clocking profile groups" and "Profile groups"
Regards
|
|
|
|
|
@patrike
Hi boss, have updated on 7.2.6 linux client, but problem not solved.
If i try to change clocking settings over AM or set other clocking profile. On linux side new values for Core, Memory, Power and Fan will be set normaly only for first 4 of 8 cards.
The last 4 cards not accepting new fan settings. no up, no down. The fan settings for this last 4 cards is set to 90%
I cant find any nvidia-smi command to check fan speed, i use in hiveOS motd command to show actual speed of fans. But strange is that the AM display me fan value which i have set (for ex. 100% or 80%)
Maybe problem not in linux service, maybe AM service cant change some files where clocking values was saved due restriction??? What must i check?
i have no plan what to do((
Regards
|
|
|
|
I recently installed the newest version of AM (fresh install) and I ran the benchmark tests on algos and the algos all worked but when it finished my Benchmark column was still blank, it was like that it didn't post the results for each benchmark. I did about 5 different algos to start with then I randomly chose individual miners and benched them individually and all of them were not recorded in the "benchmark result" column once the benchmark finished.
Has anyone come across this problem before and how did you fix it, cheers.
do not made any changes on Profit profile during test.... No, I didn't make any changes of any kind during test. I've uninstalled the program, deleted all profiles and folders in app data and installed AM again and still did the same thing in tests. are .NET up to date? Better if you update windows before installing. Otherwise you must check .log file of AM, maybe you will find some error messages. |
|
|
|
I recently installed the newest version of AM (fresh install) and I ran the benchmark tests on algos and the algos all worked but when it finished my Benchmark column was still blank, it was like that it didn't post the results for each benchmark. I did about 5 different algos to start with then I randomly chose individual miners and benched them individually and all of them were not recorded in the "benchmark result" column once the benchmark finished.
Has anyone come across this problem before and how did you fix it, cheers.
do not made any changes on Profit profile during test.... |
|
|
|
Gminer has crashed, AM restarted and i see inconsole output: 1/4/20 12:11:57 AM.181 [006] [S]Found Screen PID: '29386'
1/4/20 12:11:57 AM.186 [006] [S]Found Shell PID: 29387
1/4/20 12:11:57 AM.191 [006] [S]Found Miner PID: 0
1/4/20 12:11:57 AM.191 [006] [S]Saving configuration to: /home/user/.config/AwesomeMinerService/ServiceData.xml.tmp
1/4/20 12:11:57 AM.241 [006] [S]--> /home/user/.config/AwesomeMinerService/ServiceData.xml
1/4/20 12:11:57 AM.275 [006] [S][ManagedMiner#25 - 2080TI] Mining Engine Process started, PID: 29386
1/4/20 12:11:57 AM.275 [006] [S]Miner commands left to process: 0
1/4/20 12:11:59 AM.122 [015] [E]Failed to process API request (time: 1 ms): /api/v1/status
Connection refused Connection refused
1/4/20 12:11:59 AM.123 [015] [E]Failed to process API request (time: 1 ms): /api/v1/status
Connection refused Connection refused
some processes failed! finally i can say that two things not work properly: awsome.service initialization on startup settings of fan speed (at least for 4 last cards in the list) |
|
|
|
|
if i call motd in HiveOS before and after clocking apply over AM i get same answer:
root@hive2080TI:/awesomeminer-remoteagent# motd
Linux 5.0.21-hiveos · H 0.6-108 · up 4 hours 11 minutes
hive2080TI · ID n/a · LA 0.10 0.29 0.36 · RAM 3.8G available 1.4G (36%)
sda4 total 29G used 8.3G free 20G (70%) · ADATA USB Flash Drive 28.9G
eth0 routable ip 192.168.1.101 gw 192.168.1.254 dns 192.168.1.254 · r8169
0 01:00.0 GeForce RTX 2080 Ti 11016 MiB (90.02.17.40.9A) 64°C 100 % 238 W
1 02:00.0 GeForce RTX 2080 Ti 11019 MiB (90.02.17.00.BF) 67°C 100 % 275 W
2 03:00.0 GeForce RTX 2080 Ti 11019 MiB (90.02.17.00.BF) 68°C 100 % 237 W
3 05:00.0 GeForce RTX 2080 Ti 11019 MiB (90.02.17.40.9A) 64°C 100 % 234 W
4 06:00.0 GeForce RTX 2080 Ti 11019 MiB (90.02.17.00.BF) 64°C 90 % 211 W
5 07:00.0 GeForce RTX 2080 Ti 11019 MiB (90.02.17.00.BF) 72°C 90 % 222 W
6 08:00.0 GeForce RTX 2080 Ti 11019 MiB (90.02.17.00.BF) 70°C 91 % 240 W
7 0a:00.0 GeForce RTX 2080 Ti 11019 MiB (90.02.17.00.BF) 70°C 90 % 271 W
but AM show me, that all GPUs have right settings! Looks like AM only show, but not set settings...
why for last 4 cards fan settings was not applied???
|
|
|
|
i try to set clocking for all cards and only for one (last card in list) and in console output i see: 1/3/20 10:52:43 AM.323 [005] [S]Current list of Active Miners:
[25] IsAttached: True, PID: 11237, InstanceId: 1, Admin: True, EngineType:GMiner
1/3/20 10:52:43 AM.323 [005] [S]Saving configuration to: /home/user/.config/AwesomeMinerService/ServiceData.xml.tmp
1/3/20 10:52:43 AM.370 [005] [S]--> /home/user/.config/AwesomeMinerService/ServiceData.xml
1/3/20 10:53:02 AM.252 [010] [S]Monitoring running for 0 miners
1/3/20 10:55:00 AM.970 [016] [S]ExecuteGpuSet: SetState for Gpu: 0:0
1/3/20 10:55:00 AM.970 [016] [S]NV:SetPowerLimit GPU: 0, PowerLimit: 238
1/3/20 10:55:00 AM.970 [016] [S]NV:ExecuteCommand Executing: nvidia-smi -i 0 -pl 238
1/3/20 10:55:00 AM.994 [016] [S]NV:SetValues GPU: 0, CoreClock: 140, MemoryClock: 1200, FanSpeed: 100, PerfLvl: False
1/3/20 10:55:00 AM.994 [016] [S]NV:ExecuteCommand Executing: nvidia-settings -a [GPU:0]/GPUGraphicsClockOffset[4]=140 -a [GPU:0]/GPUMemoryTransferRateOffset[4]=1200 -a [gpu:0]/GPUFanControlState=1 -a [fan:0]/GPUTargetFanSpeed=100
1/3/20 10:55:01 AM.353 [016] [S]Request to get clocking settings. Total GPU's: 8
1/3/20 10:55:01 AM.681 [016] [S]Request to get clocking settings completed. Returned GPU's: 8
1/3/20 11:03:02 AM.857 [010] [S]Monitoring running for 0 miners
1/3/20 11:04:57 AM.722 [016] [S]ExecuteGpuSet: SetState for Gpu: 0:0
1/3/20 11:04:57 AM.722 [016] [S]NV:SetPowerLimit GPU: 0, PowerLimit: 238
1/3/20 11:04:57 AM.722 [016] [S]NV:ExecuteCommand Executing: nvidia-smi -i 0 -pl 238
1/3/20 11:04:57 AM.751 [016] [S]NV:SetValues GPU: 0, CoreClock: 140, MemoryClock: 1200, FanSpeed: 100, PerfLvl: False
1/3/20 11:04:57 AM.751 [016] [S]NV:ExecuteCommand Executing: nvidia-settings -a [GPU:0]/GPUGraphicsClockOffset[4]=140 -a [GPU:0]/GPUMemoryTransferRateOffset[4]=1200 -a [gpu:0]/GPUFanControlState=1 -a [fan:0]/GPUTargetFanSpeed=100
1/3/20 11:04:58 AM.103 [016] [S]Request to get clocking settings. Total GPU's: 8
1/3/20 11:04:58 AM.423 [016] [S]Request to get clocking settings completed. Returned GPU's: 8
AM set clocking only for GPU 0 |
|
|
|
I started agent manually (not as service) and in console output i see: lockingProfile #96, 2080TIR_P92_C140_M400_F0, list count: 5
ClockingProfile #141, 2080TI_P70_C0_M500_F0, list count: 5
ClockingProfile #138, 2080TI_P70_C0_M600_F0, list count: 5
ClockingProfile #143, 2080TI_P70_C140_M0_F0, list count: 5
ClockingProfile #140, 2080TI_P70_C140_M600_F0, list count: 5
ClockingProfile #137, 2080TI_P70_C150_M0_F0, list count: 5
ClockingProfile #1
1/3/20 10:39:34 AM.496 [015] [S]Current list of Active Miners:
[25] IsAttached: True, PID: 11237, InstanceId: 1, Admin: True, EngineType:GMiner
1/3/20 10:39:34 AM.497 [015] [S]Saving configuration to: /home/user/.config/AwesomeMinerService/ServiceData.xml.tmp
1/3/20 10:39:34 AM.544 [015] [S]--> /home/user/.config/AwesomeMinerService/ServiceData.xml
1/3/20 10:43:01 AM.576 [010] [S]Monitoring running for 0 miners
Looks like agent not load all clocking profiles on start |
|
|
|
|
Show Posts
