I think I'm just going to put a 24 hour delay on answering any questions related to "I didn't get a payout!" from now on....
Only a 24hr delay? I'd put more  hehe yes should i be concerned?  no you'll get your payout as will everyone else...when WK gets around to clearing up the payout que...all is well...move along  |
|
|
|
Hi all, I try to use a stratum-proxy server ( https://www.nicehash.com/docs/connect-via-proxy/) all works very fine but if i try to activate the option "appendWorkerNames", nicehash accept the first connection but reject the all other rigs. My pool config on stratum proxy: {
"name" : "Nicehash",
"host" : "stratum.nicehash.com:3333",
"user" : "[btc_address]",
"password" : "d=4096",
"enableExtranonceSubscribe" : true,
"appendWorkerNames" : true,
"workerNameSeparator" : ".",
"useWorkerPassword" : false,
"weight" : 1,
"isEnabled": true
}
My pool config on rigs: {
"url" : "stratum+tcp://xxx.xxx.xxx.xxx.:xxxx",
"user" : "gsd2",
"pass" : "x"
}
My log error on stratum-proxy: 2014-08-08 08:14:13,779 WARN [/xxx.xxx.xxx.xxx:59835-Thread]: [WorkerConnection] User connection not authorized. Worker [btc_address].gsd2 is not authorized on pool Nicehash. Cause: JsonRpcError [code=null, message=null, traceback=null]
2014-08-08 08:14:13,779 WARN [/xxx.xxx.xxx.xxx:40005-Thread]: [WorkerConnection] User connection not authorized. Worker [btc_address].gsd4 is not authorized on pool Nicehash. Cause: JsonRpcError [code=null, message=null, traceback=null]
2014-08-08 08:14:13,779 WARN [/xxx.xxx.xxx.xxx:33364-Thread]: [WorkerConnection] User connection not authorized. Worker [btc_address].gsd1 is not authorized on pool Nicehash. Cause: JsonRpcError [code=null, message=null, traceback=null]
How you can view the first server (gsd3) was accepted without any problem but after all other server was rejected  Anyone can tell me which is the problem ?[/code][/code][/code] thought to have them on proxy server you have to put http://IPofServerHost:xxxx ?? if anything put them all on gsd3 cause nicehash doesn't honor the appendworkername anyways...to get that to happen you'd need to open up a seperate proxy for each worker and that is a whole nother fun bucket right there so i tried the proxy again both on WH n NH (i'm in usa) but both of them have wild swings on hashrate...is that suppose to be normal? rejects is pretty much nil but for a blade is about 5.2mh/s and it started out at bout 4 jumped to almost 6 then down to 3 then back upto 6...i mean i can understand some swing but dang...also that is for an 1hr test...kinda looks just like my hashrate graph down there...just makes me mad cause i wanna mine here so bad but dunno if i'm losting money do it or not EDIT: i've also tried stratum n getwork with the proxy...both same results EDIT2: ok weird...i'm just on the WH now w/o proxy and it hasn't lost connection for 63min...and as i said previously that i could never get a connection longer then like 15min w/o proxy...hmmm..I did have the proxy still up but wasn't connected to it...just shut it down, wonder if i'll lose connection now like before EDIT3: Ok so i dunno if ya did something or not, but the unstable issue went away, i'm on WH w/o proxy now and its working pretty good...most are keep a connection for longer then 20mins...some at 105min right now works for me...looking forward to seeing the site merged together |
|
|
|
trading entire lot for btc.
Make an offer.
220 in btc shipped  25 x 6 for gridseed 60 for fury 20 bucks for the hub the rest of the stuff just comes with it wish ya took my other offer from before? |
|
|
|
when I first saw this auction posted I figured it would end up as a cluster, I never expect it to be this bad.
i did...just a 15min search of AMT, and i already decided everything they touch turns to shit like most asic companies...the usual...wish a bunch of miners could start a asic company...would blow everyone outta the water oh well glad nobody got scammed with this clusterfuck hehe If Miners started the company they would never sale a machine, they would just keep them and mine. Well alright, they would sale machines once a better one was developed and they had upgraded. or do both but better then other asic companies hehe cause we'd actually care bout the miners...hmmm til the greed monster would set in idk...guess we're all just screwed from the start hehe |
|
|
|
when I first saw this auction posted I figured it would end up as a cluster, I never expect it to be this bad.
i did...just a 15min search of AMT, and i already decided everything they touch turns to shit like most asic companies...the usual...wish a bunch of miners could start a asic company...would blow everyone outta the water oh well glad nobody got scammed with this clusterfuck hehe |
|
|
|
Did you get earnings for Thursday nite yet?
my WM got .028 on NH |
|
|
|
It's been 24hrs since the last message by amt_miners and no pm contact either.
What's going on? Bitpop accepted doing escrow and i am willing to pay the unexpectedly high shipping charges to shop today
Think the unexpectedly high shipping is just them trying to save the low auction bid amount? My guess would be yes hehe least you're making them work really hard for their money I checked on UPS tracking info for AMT's given measurements and it quoted me about $350-500 per unit and depending on urgency. I suspect it could be done for less if they have a DHL agent, but even that shipping price i can justify paying based on my bid. nonetheless its been some time since I won and another 36+ hours since I arranged an escrow provider (Bitpop) and accepted that i might pay more than $120 per miner for delivery. I'm losing patience, particularly after I was already approached by an 'AMTminers' scammer on PM sorry but i think your crazy to pay that much on top of the auction price...i'd just ship'em snail mail and hope for the best hehe...but its your money n investment  good luck ta ya...if you even get the units lol |
|
|
|
It's been 24hrs since the last message by amt_miners and no pm contact either.
What's going on? Bitpop accepted doing escrow and i am willing to pay the unexpectedly high shipping charges to shop today
Think the unexpectedly high shipping is just them trying to save the low auction bid amount? My guess would be yes hehe least you're making them work really hard for their money |
|
|
|
whats the minimum pay-out per day?
i still have some balance there and im wondering when will it be transferred to my wallet?
I think .01 |
|
|
|
Was unable to procure a replacement controller today, but one has been sent overnight to the data center and should arrive in the morning.
It shouldn't take but a few hours for things to catch up afterwards.
I'll make sure to get a manual payout done to catch up the queue and all as soon as everything settles.
Sorry for the inconvenience. Better to be safe than to run anything important on the degraded machine right now, IMO.
works for me thxs for keeping us informed |
|
|
|
Yeah, in Sydney Australia, the power is 0.32c off peak and up to 0.48c peak. This is why I chose Cloudmining.
I might wait until oneminer do the S3's. I was tempted to buy a couple of S3's, i might see how you go.
holy crap that is expensive...yep i wouldn't be mining there that is for sure |
|
|
|
Time to get back to topic! Source: As per photos: The Zhao approximately 1,500 square meters of mines, mining machine deployed about four per square meter, power consumption 4KW, combined computing power of the entire site about 500TH/s, the new count is about to force on-line about 800Th/s Nice, but how come it gives me the feeling that the place is abandon? ooo good luck with the dust there...i would hate to see their operating temps in there...whew gotta be hot hot hot |
|
|
|
|
FYI, john K. isn't mia anymore...but i don't think he is doing escrows anymore...i pm'd him once for an escrow and he never responded, but his account is active again...
|
|
|
|
I'm using the latest dmaxl cgminer for my Zeus Blizzards and getting good hashing on westhash. you can find it here: https://github.com/dmaxl/cgminer/releases i set the price and diff in my batch file. seems all ok. here's my bat file: cgminer.exe --scrypt -o stratum+tcp://stratum.westhash.com:3333 -u 1CXXXXXXXXXXXz.5 -p p=0.55;d=1024 --failover-only -o stratum+tcp://useast.wafflepool.com:3333 -u 1CXXXXXXXXXXXz -p d=1024 --failover-only -o stratum+tcp://us.clevermining.com:3333 -u 1CXXXXXXXXXXXz -p d=1024 -S //./COM4 -S //./COM29 -S //./COM30 -S //./COM31 -S //./COM32 -S //./COM33 -S //./COM34 --zeus-chips 6 --zeus-clock 340 Your Thunder should be able to run at clock speed of 342. A lot of guys on the Zeus forum recommend that for blizzards to9o...but i find the 340 works best for me. Hope this is a bit helpful. My Antminer S1s and S3s aren't as stable as my Zeusminers on Westhash yet ...but their overall average is slightly better than Eligius and as good as BTCGuild. I think its just the way Antminers function. Will run them through the night. thxs...yes i think i'm using that version as well...so you haven't noticed any change? it was all working fine...then poof nothing but problems...ugh why oh why did i decide to get into scrypt?  those first little dips was from me, trying to load balance a thunder between here n wemineltc...ya that didn't work at all lol the first black line is from last night around 10pm cst...was thinking i should switch over when that started happening...my goto pool is wemineltc but they have had terrible luck so really wouldn't have mattered the yellow line is all units at 16k diff rate only been 92mins and now hashrate is slowly declining again...hmm i dunno well that is one thing too...i've never had that time go longer then i think 15-20mins...now its at 92min which is good right? but the hashrate is awful My miner keeps zero'ing out. Does this mean it keeps disconnecting my miners?
Why?
I am using latest minera with cpuminer for my gridseeds & a second minera using cgdmaxlzeus for my fury.
And I cannot use any proxy for Minera...
Either fix it or Ima have to go back to low profit clevermining.
Not to long ago everything was working terrific.
Don't fix something that aint broke damnit. gah.
it is broken...they split the sites up and profit has gone way down or at least i think it has My Blizzards have been hanging in all day. I had to lower the price to 0.55 tho. They would not connect at 0.60 even though there were open orders above that price with space for my 9.3 MHS. So I figure I am connected to an order that is only paying 0.56 atm. That is likely better than i will get on clevermining, wafflepool or any ltc pool atm. I don't know why your Thunders are doing that. For my Antminers, the same thing happened. They divorced themselves from BTCGUILD and connected to WestHash (my priority pool) when someone put in an order for .029. I had the price set at .0280 you see. Anyway, they hummed along nicely for about 15 mins then jumped back to BTCGUILD ...eventho that order still had several hrs left to fill. Then, before i could re connect my Ants, someone else' miners filled the gap on West Hash. So i set my price to .0268 and am now likely connected to an order paying 0.0270. I just did some math and hat will give me less payout compared to if i had them on BTCGUILD. So i have to re-set my price higher and let my second priority pool, BTCGUILD, take over....which it will. I am setting a price that will equal their payout....and i know all the buy orders on West Hash (except for 2) are lower than the price i have to set. The 2 that are higher are being filled by other miners so i know i won't connect to them. But if new orders above my price com ein, Bob's your uncle. My Ants will grab them. Ya, I asked myself why did i ever get into scrypt. I sold off all my batch 2 Zeus Hurricanes when diff was beginning to climb. I kept my batch 1 blizzards as i can connect them to other circuits that are not quite full with my Antminers. Call me crazy (or a contrarian) ...but I am thinking of getting a Batch 3 Thunder x6 under Zeus' 30% discount -ie: the one you get when you show them a refund from a competitor. I think scrypt diff will continue going sideways for awhile because my gut tells me that Zeus' competitors are gonna run into similar challenges. I think that's why Alpha decided to delay fabrication after tapeout. I am willing to bet others will do the same after tapeout. That will delay their fabrication just like it did Alpha's. It seems like scrypt ASICs are not as easy to roll out as sha256 ASICs. Interesting times indeed. Just like the old gold rush-lol. ya i had all my scrypt on westhash W/O any p= but yet they still would disconnect all the time? doesn't make sense oh well i'll see what coinotron gives me for stable running...i think all alt coin pool will payout bout the same as ltc...i would be on here but only making .04 btc here so i think that might be less then ltc idk...crazy crazy |
|
|
|
Escrow for sale of miners is still not resolved, this is the escrow address 1PNFKTY5HgQL71RBYpD3kKeoQd9xDU5NTW
The mining addresses have had no BTC removed.
1D9Pc6nehJAEPr4ENqss1cuokSFiTDLiE8
17nAFjXqqy7dWgEDXchpNsBEFkFJp8qR7M
14fC3MDT4q6sLhQNUSHmUTMWW1AEvtvWjj
1DN968X3M3ENZYFY62fn3jPtXqoUwhb4tv
16aqmEN9fMTmsRaoYkDWCT8SxnmgxXqDUp
Am waiting for escrow to be resolved and will make a payment as soon as it happens.
will remove my neg. feedback once i get a payout...glad you actually responded finally gives me hope you didn't do a runner!! |
|
|
|
I left. I left em all. I've gone to litecoinpool where it is stable. Multicoin mining atm is like mining litecoin anyways.
ditto...trying coinotron |
|
|
|
I'm using the latest dmaxl cgminer for my Zeus Blizzards and getting good hashing on westhash. you can find it here: https://github.com/dmaxl/cgminer/releases i set the price and diff in my batch file. seems all ok. here's my bat file: cgminer.exe --scrypt -o stratum+tcp://stratum.westhash.com:3333 -u 1CXXXXXXXXXXXz.5 -p p=0.55;d=1024 --failover-only -o stratum+tcp://useast.wafflepool.com:3333 -u 1CXXXXXXXXXXXz -p d=1024 --failover-only -o stratum+tcp://us.clevermining.com:3333 -u 1CXXXXXXXXXXXz -p d=1024 -S //./COM4 -S //./COM29 -S //./COM30 -S //./COM31 -S //./COM32 -S //./COM33 -S //./COM34 --zeus-chips 6 --zeus-clock 340 Your Thunder should be able to run at clock speed of 342. A lot of guys on the Zeus forum recommend that for blizzards to9o...but i find the 340 works best for me. Hope this is a bit helpful. My Antminer S1s and S3s aren't as stable as my Zeusminers on Westhash yet ...but their overall average is slightly better than Eligius and as good as BTCGuild. I think its just the way Antminers function. Will run them through the night. thxs...yes i think i'm using that version as well...so you haven't noticed any change? it was all working fine...then poof nothing but problems...ugh why oh why did i decide to get into scrypt? those first little dips was from me, trying to load balance a thunder between here n wemineltc...ya that didn't work at all lol the first black line is from last night around 10pm cst...was thinking i should switch over when that started happening...my goto pool is wemineltc but they have had terrible luck so really wouldn't have mattered the yellow line is all units at 16k diff rate only been 92mins and now hashrate is slowly declining again...hmm i dunno well that is one thing too...i've never had that time go longer then i think 15-20mins...now its at 92min which is good right? but the hashrate is awful My miner keeps zero'ing out. Does this mean it keeps disconnecting my miners?
Why?
I am using latest minera with cpuminer for my gridseeds & a second minera using cgdmaxlzeus for my fury.
And I cannot use any proxy for Minera...
Either fix it or Ima have to go back to low profit clevermining.
Not to long ago everything was working terrific.
Don't fix something that aint broke damnit. gah.
it is broken...they split the sites up and profit has gone way down or at least i think it has |
|
|
|
my numbers are...going from yesterday til i started...so still on free hosting...WM 0.03120885 0.03301262 0.03189108 0.03309736 0.04121168 0.04217305 0.0566215 0.03933571 this was on clever rest on nicehash slowly dying nicehash has the best chance to stay up with payment cause its selling your hash not like other pool...but for them to even with all other pools is weird...unless that is what the market calls for it guess...but NH did screw up spliting their sites up...but next week it'll be under 1 site again...hopefully that'll restore the price to higher then any other pool also if you goto NH site and see the 24hr payout / by 1000 and * by your hash...mine is 54 which gives me 0.0300132 and that is almost exactly what zen site says i'll get |
|
|
|
so i had to install the proxy for westhash now...since ya must have done something to the servers...cause it all was working fine then poof tons of disconnects..but with the proxy its back to working good... so with the no rejects part...my thunder unit should get 27mh/s but only avg. 20-21mh/s on here...is that cause of the no reject being counted towards hashrate? so if i was on another pool it'll say around 27mh/s so 6-7mh/s are rejects? that seems really high...also with the proxy you can't append workers and getting 4096 diff rate...which sucks for a 1.4mh/s blizz EDIT: ok now diff 8192 crazy...so now i'm going to have wild swings on hashrate? 10min later diff rate 16384 ya not going to work well off to find another pool i guess |
|
|
|
Jar file was not found 1: org.glassfish.grizzly.http.server.CLStaticHttpHandler.getJarFile(CLStaticHttpHandler.java:339) 2: org.glassfish.grizzly.http.server.CLStaticHttpHandler.handle(CLStaticHttpHandler.java:278) 3: strat.mining.stratum.proxy.Launcher$2.handle(Launcher.java:294) 4: org.glassfish.grizzly.http.server.StaticHttpHandlerBase.service(StaticHttpHandlerBase.java:188) 5: org.glassfish.grizzly.http.server.HttpHandler$1.run(HttpHandler.java:217) 6: org.glassfish.grizzly.threadpool.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:565) 7: org.glassfish.grizzly.threadpool.AbstractThreadPool$Worker.run(AbstractThreadPool.java:545) 8: java.lang.Thread.run(Unknown Source) what jar file am i missing? using the standard 5.0 and have newest java installed...thxs i read last page and yes i do have the stratum-proxy-webapp.jar in the lib folder and OS is vista spk1 proxy still works great just no web gui was sad to hear nicehash doesn't let appendworkers function work 4096 diff rate on a 1.4mh/s sucks weird installed this on another lappy with vista...web gui works on that one...same version installed both for proxy n java...i'm confused oh well might not get to use this long since NH doesn't honor appendworkers...and diff rate upto 16k now, hashrate down |
|
|
|
|
Show Posts
